Help Req'd! - Table will not flow onto next page!

Hello!
I am currently doing some form design for a large SAP project in the UK and am having problems with getting a table on a remiitance advice form ive created to flow onto a new page.
currently my form is configured as follows:
- saved as a dynamic pdf.
- 2 master pages: the first containing text fields for form title, company logo, addresses, and a disclaimer at the bottom, page numbering, as well as a border created with rectangles. The second contains all of the above except the addresses.
- 1 body page: contains a subform set to flowed (top to bottom) which contains a table with header/data/footer rows. The data row is set to repeat data so as to expand when there is more than 1 dataset.
i have tried playing with content areas but they will not stay at the size to which i draw them and then cannot be manipulated afterwards, also i only have pagination settings available to me on the body page itself in the hierachy. the subform inside it, and the table inside that, have greyed out pagination settings.
finally the body page is set to positioned at present as setting it to flowed causes the subform containing the table to shoot to the top of the page!
The problem I am getting is that the table when containing lots of data just runs off the end of the page!!
Any ideas much appreciated!
Thanks!!
Edited by: Ryan Harris on Jul 3, 2008 1:05 PM

Basically you can tell the bodypage to overflow to the second masterpage when it runs out of space.
On the bodypage properties that's done within the pagination tab.
Make sure that you enable the "Allow page breaks in contents" tickbox.
By the way, just wondering, how did you save the form as dynamic, since dynamic is only enabled in the SAP world by setting a dynamic/enabled flag.
If you are testing outside of sap in the LiveCycle designer you might want to close the file and then reopen it, after you saved it as dynamic. There's a nifty setting in the LiveCycle designer properties which enables you to create dynamic pages by default. It's in the LiveCycle Designer Options.

Similar Messages

  • Flowable Form does not flow onto next page

    I have created a form with a table wrapped in a subform and made it flowable and each field expandable. That part works great. However, I cannot get the content to flow to a subsequent page. When the content is too large for the page, it just keeps pushing down beyond the bottom of the form where I cannot even access it.
    The form contains a table of three rows and within each of those rows, all but one column contain a table of three rows. The highest level table is wrapped in a subform and it is marked as flowed with each text field set to expand to fit. I've selected every row and subform I can and checked the box "Allow page breaks within content". The forms still does not break at the end of the page but just keeps pushing the data down off the page.
    Any help you could give me would be greatly appreciated. Thanks.

    Thank you for your assistance. However, that subform is flowed and Allow page breaks within content is checked.
    Is there something under pagination for that subform that I might need to do. I tried creating a page 2 and intended to set the Overflow on the pagination tab to page 2 but that is not an option. I can only set this to PageArea1 or ContentArea1 which I see are objects in the master pages and I do not have a page 2 in master pages. Is that the key?

  • Table row does not flow to next page

    Hi,
    I am using deep structure table in adobe form but the content is not flowing to next page.
    I have wraped the table in subform, Body Page, subform and table all are flowed and allow page breaks with content is also ticked,  still the table row does not flow to next page.
    Regards,
    Kimaya

    Hi Kimaya,
    Just drag the table directly on the body page and execute the form. This should take care of the properties required for data to flow on the form.
    Thanks

  • Text field in table not overflowing onto next page!

    Hi,
    I have set up a table with a text field in the first row, added buttons to add and delete rows, set to allow page breaks and made the text field to expand to fit and allow multiple lines. The problem I am having is that if I put a lot of text into the text field it will not expand on to the next page so not all of the text is visible. If I just set up a 1 row table the expansion works as I would expect and takes up as many pages as needed. Somewhere along the line the add, remove buttons or their associated javascript or the Repeat Row option seems to be having an effect.
    Any ideas?
    Thanks,
    Greig

    Basically you can tell the bodypage to overflow to the second masterpage when it runs out of space.
    On the bodypage properties that's done within the pagination tab.
    Make sure that you enable the "Allow page breaks in contents" tickbox.
    By the way, just wondering, how did you save the form as dynamic, since dynamic is only enabled in the SAP world by setting a dynamic/enabled flag.
    If you are testing outside of sap in the LiveCycle designer you might want to close the file and then reopen it, after you saved it as dynamic. There's a nifty setting in the LiveCycle designer properties which enables you to create dynamic pages by default. It's in the LiveCycle Designer Options.

  • Header Area of Table is not printing on Next Page in SMARTFORM

    Hi All,
    I am facing one problem while Developing a smartform for Delivery.
    I want the same data to be copied to the Next page which is coming on first page. I copied the Main window to Next page with all the details but the Header of the Table is not printing on the Next(Second) page.
    Please help me out regarding this...
    Thanks in advance for your help....
    Thanks & Regards,
    Digamber

    Hi,
    If you are talking about the table (which you created in the main window) and you want the header of the table to be printed on the next page. Is it because of overflowing that's why its printed to the next page?
    If yes, the header cannot be printout out.
    Just for your information. If you want a window in the first page to be copied to all subsequence pages, set the window type to be copies window.
    Hope it helps.

  • List of apps will not go to next page

    I found a small bug, when I am viewing a list of all the apps in a category, I am unable to go to the next page. 
    Such as all the free apps in the Food category (in the iTunes appstore). 
    At the bottom of the page is a next button and numbers of the next pages, when I click on any of those it takes me to the top of the page but does not show any new apps.  I think there is a problem with the javascript used under the hood. 
    I have the latest version of iTunes (10.7) and Lion.
    This is not a huge problem, just trying to report a bug. 

    same bug in OS X 10.8.2 and iTunes 10.7

  • HELP! My images will not drop into a pages!

    Hello,
    I am writing a large paper with many images.  There are probably around 15-20 images already in the paper, with text, but when I tried to drop in another picture it did not show up.  I could click 'edit' and it would say 'undo drop' but there was not image to 'undo'.  What should I do?

    Lilly.Love wrote:
    Hi, I'm new to this and for some reason my images are not appearing to full scale on adobe premiere cs6. This is really annoying as I am trying to make a stop motion video but I can't see what I'm doing. Please reply soon, this is an important project. Thanks
    Your sequence settings and clip settings are not matching. To make them match, right click on a clip and choose New Sequence from Clip and a new sequence will be created based on your clip settings.

  • How to make text elements flow to next page depending on the table above it in main window (smart forms)

    Hi all,
    In my main window i have a table that contains line item data.
    Just below that i need to display text elemet (some text and terms & conditions).
    as below
    Based on the items in table, it should flow to next page. But it is not happening. rather the data which do not fit into first page gets deleted.
    Please help to solve this. Its urgent.
    Thanks in advance

    Hi Rashmi,
    please drop these texts from your table footer (i hope you have put into footer of your table), just create a template after your table and  put your all these data within this template and make sure that your this
    template should be called after your tables data get displayed.
    Or you can create a text , after your table where you put your data, and it should get displayed when the line items ends for your table.

  • In Pages, the column in the table won't flow onto the second page. The text is hidden. Please help!

    In Pages, the column in the table won't flow onto the second page. The text is hidden. Please help!

    Thank you for your reply,
    When I click 'view' , I can "show inspector". From the table tab, I can pull up the "Format". [See below]. I don't see the "Arrange" or "Object Placement Move with Text"
    Right now I have the Wrap Text On. When I take it off, It messes up my rows [see second image].
    All I want is for my column to flow onto the second page.
    Your assistance is genuinely appreciated.
    Thank you again.

  • My apps on my iTunes, on my computer will not sync onto my iPhone 4s. HELP PLEASE!

    My apps on my iTunes, on my computer will not sync onto my iPhone 4s. HELP PLEASE!

    Is your iPhone's name listed under DEVICES in iTunes?

  • I have recently upgraded my mac and ipad to IOS7 and find that Safari will not load onto my iPad. It just shuts down the app. Any ideas? I have been onto Mac who took me through a very long iPad robot, but the problem is still the same! Help appreciated

    I have recently upgraded my mac and ipad to IOS7 and find that Safari will not load onto my iPad. It just shuts down the app. Any ideas? I have been onto Mac who took me through a very long iPad robot, but the problem is still the same! Help appreciated

    Do you mean that you did a soft-reset ?
    Try clearing Safari's cache : Settings > Safari > Clear Cookies And Data and also Clear History
    If that doesn't fix it then try closing Safari via the iPad's multitaskingbar and see if it works when you re-open it :double-click the home button to open the taskbar and then swipe or drag the Safari app's 'screen' up and off the top of the screen to close it, and click the home button to close the taskbar.
    After trying the above you could also do a soft-reset (even if this is what you've already done it might be worth trying after clearing Safari's cache and closing the app via the taskbar) : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • One song will NOT burn onto any cd

    up until now i have never encountered such a problem. one song that i purchased from iTunes will not burn onto a cd. i've never had troubles before with any other song, just this one. i've tried complaining to the itunes help but i got some lame answer that didn't help at all. could it be possible to have the itunes store allow me to download it again without paying for it, i think they let me download a corrupt song. why would they do that?

    My very strong advice is to give up. Certainly don't waste another second messing about with tags. I have not seen one scrap of evidence to suggest they have any effect.
    From my experience, the only chance you have of getting it matched is to alter the waveform of your track so that it matches that on the store. I assume that yours is a different mastering or something. I'm no expert, bit I'd guess that your chances of hitting on the right adjustments could be best expressed as zero.

  • I have song in itunes that will not load onto ipod ?

    I have a song in itunes that will not download onto ipod, nothing by song in library indicating there is a problem. Can anyone help me ?

    Does the song have a tick-in-the-box next to the song title? (You may have selected to Sync only ticked songs and videos to your iPod. This option is on the Device/Sumary pane that appears when you connect the iPod to iTunes.)
    Is the song in a format the iPod can play? (Is it the same format as other songs that do Sync to your iPod?)
    Have you looked (on the iPod) under songs as well as artists? (It may show up under songs but not under artists.)
    Try the Search facility on the iPod and see if it shows up that way.

  • I have songs that have been purchased and they show up in my I tunes but the are not showing up bold like all other songs in my library, they will not let me download from the cloud and will not load onto my ipod.

    I have a handfull of songs in my library that are not showing up bold like the other songs. When I click the icon to download from the cloud nothing happens and they will not load onto my ipod. When I look for them in the purchased area they show up as purchased and downloaded.

    Welcome to the Apple Community.
    So far as I am aware, books haven't been available for 6 years, so I'm wondering if you mean audiobooks.
    Audiobooks are not currently part of the content that can be re-downloaded.

  • My wi-fi connection is enabled, however Safari is telling me the server stopped responding.  My laptop is working fine on the same wi-fi network.  I have reset the network settings and still Safari will not open any web pages.  Help!

    My wi-fi connection is enabled, however Safari is telling me the server stopped responding.  My laptop is working fine on the same wi-fe network.  I have reset the network settings and still Safari will not open any web pages.  Help!

    Ralph..........Did as you suggested and I am still getting the message "Safari could not open the page because the server stopped responding".  I am not able to connect with anything on the Internet.  Frustrating since I am able to connect with my laptop.  Thanks for the suggestion.

Maybe you are looking for

  • Downloading Music from an Ipod into ITunes

    My hardrive crashed. Had to purchase a new one. All software including Itunes was reinstalled on the new hardrive. Obviously, my Itunes library is now empty. All of my former Itune music library is on my Ipod. How do I download all of the music on my

  • Idoc to SOAP Async - Sync - stuck @ bpm bridge

    Hi there, i'm implementing an SAP - Idoc / Async ---> PI - > Soap / Sync communication, the idea is that i update the Idoc Status back on erp using and status idoc, i got the whole scenenario working but the Async - Sync bridge part with the status i

  • No mail and connection to itunes

    I have 2 problems all happened around same time.  First a message that says the mail server is not responsing.  Verify account settings & all looks okay to me.  Secondly, when plugging ipad into PC itunes message is could not connect to the iopad bec

  • Wierd bzr issue.

    Whenever I resize a window whenever I'm checking out a branch using bzr, I automatically stops checking out the branch. I'm using xmonad. I get the following error: bzr: ERROR: [Errno 4] Interrupted system call

  • Pages does not display on Mission Control

    I use three fingers on the trackpad to initiate Mission Control.  Even though I have a document open under Pages on my desktop, Mission Control does not show me an image or icon for pages that I can select.  I see a vertical white line where the icon