Help req'd using VideoPier with iMovie 08

As iMovie 08 can't read my video footage I'm using this application - VideoPier- to de-code it. However, when I export my footage to iMovie 08 it either goes to the 'Folder' or just now it's gone nowhere! To confuse matters even more, the footage has even gone direct to iMovie 08 as it should do but only on two rare occasions. The guy at VideoPier seems to be at to loss to know why I have this problem. Is there anyone out there who can help me.....please?

Hi, Bengt,
+I think there is a difference between 6.0.3 and 6.0.4. Had problems with 0.3 after+
+installing iLife08 that was OK after 6.0.4 up-grade. (PPC dG5)+
That's why I said 'reportedly.'
I think you are correct. I, too, am suspicious of a difference, and I also downloaded version 6.0.4. I did the download as soon as I saw it on Apple's site after getting my new iMac.
I did have the prior iM6 version that I ported over from my old iMac, too. I am sure that I transferred all my old stuff before downloading 6.0.4, but I didn't run into any problems with it not installing.
Regards,
Beverly

Similar Messages

My iPhone 4 will not sync my new voice memos from the "Voice Memos" app to my computer. This is frustrating, should not be so hard, can someone please help. I use PC with windows 7 with iPhone version 6.1.3 and iTunes most recent. Thanks.

My iPhone 4 will not sync my new voice memos from the "Voice Memos" app to my computer. This is frustrating, should not be so hard, can someone please help. I use PC with windows 7 with iPhone version 6.1.3 and iTunes most recent. Thanks.

In the Music tab of iTunes, do you have 'Include Voice Memos' checked?

HT2361 I have a Sony DCR-HC20. Can I use this with iMovie? How do I down load my videos?

I have a Sony DCR-HC20. Can I use this with iMovie? If not, How do I transfer to My computer, and what would I use?

http://esupport.sony.com/US/p/support-info.pl?info_id=1192&mdl=DCRHC20

Help! iSight Not Working with iMovie!

I can't seem to use my iSight camera with iMovie. ?? The camera works with PhotoBooth, but with iMovie not even the "Record with iSight" button appears. I'm using iMovie 5 on an IMac G5 with a built-in iSight camera. Any suggestions on getting iSight to record to iMovie??

You're welcome, -John
If you are following the directions in this Apple article
http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh2329.html,
your iSight should be working.
If you have added any hardware or software since iMovie worked correctly for you, first rule out any Possible conflicts with your iSight.
If your problem is ONLY with iMovie, try this:
• Quit iMovie if it is open.
• Delete your iMovie preferences file:
Finder > Go > Home > Library > Preferences > com.apple.iMovie.plist
• If they exist, also delete any other "com.apple.iMovie" files that end in ".plist" in this folder, or example, "com.apple.iMovie2.plist" and / or "com.apple.iMovie3.plist".
• Close those folders and launch iMovie again to check for proper functioning.
• When you get iMovie working again after tossing your old .plist files, you will need to reset all preferences that you want to be different from the default values.
If you cannot make your iSight does not work in any app or in any User Account, you will need the help of an Apple Service Provider Technician to repair your iSight.
If only iMovie gives you trouble, even after dumping the iMovie preferences, I suggest you reinstall the iMovie application.
EZ Jim
PowerBook 1.67 GHz w/Mac OS X (10.4.10) G5 DP 1.8 w/Mac OS X (10.5) External iSight

Using MacGallery with iMovie HD

Can MacGallery be used with iMovie HD? The system requirements for iMovie 08 are too advanced for my system but I would like to use MacGallery.

Install iLife 08 and you can create "Gallery" pages using iPhoto 7.0.1.
Export your iMovie 6 Project to an appropriately sized QuickTime file, bring it into iPhoto and upload.

Can i use compressor with iMovie.

will compressor worh with imove?

In a manner of speaking, sort of.
If you export a QT file from iMovie, Compressor can work on it.
More importantly, what is it that you want Compressor to do?
Russ

Help! Purchased used MBP with admin password, want to install OSX Leopard!

I purchased a used MBP with Tiger. The seller sold me a laptop with a password! I can log into the computer but I can't install programs (it asks for the password).
I don't have the original Tiger disks.
*If I purchase OSX Leopard tomorrow at the Apple Store, will I be able to install Leopard? Will it ask me for the password? Is there ANYWAY to get around this?*
*Do I have to buy a completely new hard drive to install to?* If I do I'll be really upset. I thought this was a good deal but I guess not if I have to pay for all this...

The machine is set to use "automatic login" that is why it does not require a password on boot up.
Boot from the Tiger Install DVD and choose Reset Password under the drop down menu on the top menu bar. You did get the OS disks with the machine, correct?
It will search the machine for all admin accounts and you can choose which one you want to reset.
And FYI, you always need the password of an admin account to install software. It is one of the safety features of OS X.
Installing 10.5 (Leopard) is your choice but it is not required to get you out of this jam if you have the 10.4 (Tiger) DVD. But you will need to boot from the 10.5 DVD and then decide what kind of install you want to do. If it was me, I would erase and install and start clean with legal software and applications.

Help using iDVD with iMovie '11

I bought the new iMovie '11 from the Mac App Store, and have made a movie successfully on my iMac with OSX 10.6.8.
However, it doesn't seem to be able to talk to my version of iDVD 6 which looks pretty out of date, but I can't seem to
find the new version on the App Store.
There is nothing new for me to download via Software Update.
Could anyone advise me how I can update my iDVD?
Thanks!

Thanks for the fast responses everyone! It does indeed work as AppleMan1958 says, by sharing as large movie. I had to manually drag it to iDVD from a Finder window as it doesn't appear in the media browser, but apart from that it works fine!
I am just a bit puzzled as to why I can buy certain elements of new iLife in the App Store, but others are not available to download....

When I try to use iSight with iMovie and it says no camera available in iMovie '08

iSight won't connect in iMovie... HELP! I found an article regarding the issue but I think the version of iMovie was different than what I have because it really did me no good.

Here are my suggestions for your iMovie '08 problem.
One of them will resolve your trouble. Try them in
any order you like, testing camera function after
each one until you have found the one that worked.
• If you have not already done so, restart Mac and
    try again. A simple restart often clears up minor
    issues, including yours.
• I am using iMovie '11 with no problems. Some
   problems have been reported with the iMovie 9.06.
   However, I can't find compatibility info for ver 8.
   If possible, consider updating to this latest iMovie:
    http://www.apple.com/ilife/imovie/
• Try Apple's http://support.apple.com/kb/HT2090
   suggestions. The specific "reset" procedure suggested
   there for your particular MBP model often restores normal function.
(Apple has changed the built-in camera's name on newer Macs from "iSight" to "FaceTime" and then to "FaceTime HD." Regardless of the name of your built-in camera, the same info and troubleshooting applies.)
• Use your Mac's Disk Utility to repair permissions and then
   download and apply the latest Combo Update, for your Mac OS,
   the current one is at: http://support.apple.com/kb/DL1581
    (yes, use this Combo even though you are already running 10.8.2)
Repair permissions again immediately following the system restart that completes the Combo update.   Then check whether your Mac's  > Software Update... menu command tell you that other updates are needed. If so, apply them and finish with another permissions repair.
• If you still have problems after properly applying the Combo,
   try OS X's Recovery feature http://www.apple.com/macosx/recovery/
   to repair your hard drive or, if all else fails, reinstall a fresh copy of OS X.
• Properly applying the latest Combo update or repairing or
   reinstalling OS X can usually correct software problems.
   However, if your trouble is caused by a hardware problem,
   there are no user serviceable parts of your webcam.
   For hardware help, contact an Apple-Authorized Service Provider for service.
Message was edited by: EZ Jim
Mac OSX 10.8.2

Is anyone using Pegasus with iMovie?

I purchased Pegasus when I got my new macbook Pro, latest version purchased a few months ago. Pegasus seems fast and promising. Decided to get all my iMovie stuff and organize it onto Pegasus.
I had been using a Powermac G5 previously. Was using final cut express. Needless to say, big loss on that note. I like the speed of the new MBP + thunderbolt, but not sure I'm going to try the new FCP X yet. Seems to be too much anger over the program and I am still adjusting to a whole new way of thinking. Moving from a big desktop to a laptop is quite a move. The primary issue is storage. 750gb drive isn't much.
I use Aperture 3 also and have referenced my files. That freed up enough space for me to have about 300gb free on the MBP drive.
Here's where I'm headed for the moment with this question. As I'm consolidating and trying to understand a whole new approach to organizing and using movie files between Ap3, old iPhoto stuff, and iMovie stuff, seems that iMovie is the best overall organizer to view files on the Pegasus, internal drive (very few though), and between various programs.
#1 - If I were to purchase FCP X, does it organize and show all files between iMovie, iPhoto, and Aperture 3?
#2 - I found multiple duplicate files for the moment. Sorting through them, rejecting them, sending them to the trash. It does seems to delete them when on the hard drive and I see an increase in free space. When the files are on the Pegasus, it does seem to delete them (checked via finder), but the space increase isn't seen. For example, I got rid of one project that was about 10gb of events. No change seen on Pegasus. ??
Anyone else using a MBP for video editing that has Pegasus/TB and uses various programs (Ap3, iPhoto, iMovie)? I'm just now really addressing this issue of trying to understand the best overall approach to organize and manage video files.
Aperture 3 solved all my photo problems, looking for something as straightforward for video purposes. Advice?
Thanks.

#1 - If I were to purchase FCP X, does it organize and show all files between iMovie, iPhoto, and Aperture 3?
iMovie will let you organize your movies, and it will give you access to the existing organization of your photos in iPhoto and Aperture. If you have video clips stored in iPhoto or Aperture, you will have access to them, too. In general, you can organize in the App that owns them. For example you can create a photo Album in Aperture. You can see it in iMovie.
Final Cut Pro X is the same, but it can also let you import your iMovie Events and Projects. When it does this, it is non-destructive to the Events and Projects in iMovie. But, interestingly, it does not take up any more space on your Pegasus. The iMovie Events will be imported by a Hard Link (same as the way Time Machine works), so you can have both a FCP Event and an iMovie Event accessing the same clips, without taking up double space.
Having said that, going forward, you would want to import your events into FCPX to take advantage of ProRes 422, which is a superior intermediate codec than Apple Intermediate Codec, which is used in iMovie.
#2 - I found multiple duplicate files for the moment. Sorting through them, rejecting them, sending them to the trash. It does seems to delete them when on the hard drive and I see an increase in free space. When the files are on the Pegasus, it does seem to delete them (checked via finder), but the space increase isn't seen. For example, I got rid of one project that was about 10gb of events. No change seen on Pegasus. ??
If the space is not freed up after you delete the clips, chances are you can free up the space by emptying your Trash. The trash keeps up with files like these in case you change your mind.

Help/Tutorial on Using Xpress with Java

Hi forum:
Can anyone point me to a tutorial or article on how to use Java method from Xpress (in NetBeans).
I have created a java class in the 'Custom Java' folder for the IDM prodject in Netbeans - I am not terribly sure what next steps to take.

Yes..The sun documentation does seem to be written in such a way to try and impress rather than to inform.
But...
XPRESS and Java, you only got one or two options.. as the previous guy said.. look at the Workflow, Forms and Views docu. There is a section called Java and Javascript expressions in the XPRESS language section.
I guess the <invoke> is the most commonly used XPRESS command with java. You invoke a method of a class.
The trick is figuring out how to introduce your new class into the IDM environment so that your XPRESS can find it.. and then call the method via the XPRESS invoke.
Typically, you create a .jar of your custom classes, drop this .jar into $WSHOME/WEB-INF/lib and restart your App server.
Do a search of the forums for "custom classes"
I totally agree with you that SUN documentation is a perfect example of the 80/20 law.

|HELP PLEASE|:. Using itunes with iriver, how! .:|HELP PLEASE|

Ok, for christmas i got an ipod [Nano 3rd gen], and my lil sis got an iriver [X20 model, just today mum bought us X3 $30 itunes cards, for itunes, now the format itunes uses is called :m4a, i want to get these songs onto my sisters "iriver X20" mp4 player, but the only formats the iriver can use are:mp3 & WMA, please help, i have tried to just put the itunes straight on to the iriver X20 but when i took the usb cable out of the iriver, it showed no recollection of the itune songs.
i put the cable back into it so connected to the computer again, and it showed the itune songs were still on the iriver X20, im sooo confused, maybe if i could change the itunes format the mp3, from m4a i could use the on the iriver X20, but i dont know how to do that either, im really puzzled lol, please help!

+the only formats the iriver can use are: mp3 & WMA+
The iTunes Music Store does not sell either of those.
To use your gift card, make sure you are buying "iTunes Plus" tracks. Use iTunes to convert them to MP3 format, which can then be played on your iRiver. Follow the directions in the iTunes Help article "Saving a copy of a song in a new file format."
Do not buy the protected tracks. They are not usable in non-Apple players.

HELP: Who's using LINUX with Java2 and WLS 5.1?

Have you experienced any problems? If so please tell me your experience.
I am using RedHat 6.1 w/ JDK 1.2.2 (006) and WebLogic 5.1 and I am having a
terrible time with exceptions like:
Exception in thread "main" java.lang.VerifyError: (class: weblogic/Server,
method: stopStatically signature: ()V) Inconsistent stack height 2 !=
268435455
- and -
Exception in thread "main" java.lang.NoClassDefFoundError:
weblogic/kernel/AuditableThread
at java.lang.ClassLoader.defineClass0(Native Method)

If there is no libmuxer.so in $WL_HOME/lib/linux, then the Performance
Pack is not used.
visor-palm John wrote:
>
I'm downloading Blackdown's JDK now, what is libmuxer.so?
If Performance Pack not supported how do you prevent its use?
Here is my command-line, can you show me yours as a comparison?
/usr/java/bin/java -ms64m -mx64m -classpath
./lib/weblogic510sp5boot.jar:./classes/boot:./eval/cloudscape/lib/cloudscape
.jar -Dweblogic.class.path=./lib/weblogic510sp5.jar:./license:./classes:./li
b/weblogicaux.jar:./myserver/serverclasses -Dweblogic.home=. -Djava.security
.manager -Djava.security.policy==/local1/opt/weblogic/weblogic.policy
weblogic.Server
...but I get: java.lang.NoClassDefFoundError:
weblogic/kernel/AuditableThread
Thanks,
John
"Jesus M. Salvo Jr." <[email protected]> wrote in message
news:[email protected]..
I do for development. I suggest you give blackdown's JDK 1.2.2 FCS a
try.
Here's more info on my config:
RH 6.0 --- updated to 2.2.16 kernel and glibc 2.1.3
WLS 5.1 + SP5 + libmuxer.so (WLS linux performance pack -- unsupported)
Blackdown JDK 1.2.2-FCS
Apache 1.3.12 + modssl + WLS proxy
Regards,
John Salvo
visor-palm John wrote:
Have you experienced any problems? If so please tell me your
experience.
I am using RedHat 6.1 w/ JDK 1.2.2 (006) and WebLogic 5.1 and I amhaving a
terrible time with exceptions like:
Exception in thread "main" java.lang.VerifyError: (class:weblogic/Server,
method: stopStatically signature: ()V) Inconsistent stack height 2 !=
268435455
- and -
Exception in thread "main" java.lang.NoClassDefFoundError:
weblogic/kernel/AuditableThread
at java.lang.ClassLoader.defineClass0(Native Method)

Can you use Chromecast with imovie

Does anyone know how to get Chromecast to play my imovie's?

amanning1 wrote:
I did join their discussion, no one responded. …
… it's more fun here. …
I wouldn't wonder, if it's not possible to apply any homebrewn content …
I assume, you have to upload it somewhere (Google=YouTube) … no prob at all.

[Help Req] Cannot login in with OD credentials

I am setting up for my first time a full Mac network (i come from MS/AD background).
I created a test account.. and OD credentials passed fine. Mobile account was created and offline worked as expected.
I then deleted the test account and created a few of our real accounts in OD... and then tried to login via cleanly built iMacs and MacBooks. however.... I am now no longer able to get any account to login.
What happens is this... I pass the login in credentials.. then get the beach ball.. then after a minute or two, the login panel will shiver.
Passing bad credentials will get an automatic denial. So I know the machines are doing something... but I have dug and dug and cannot figure how what has gone wrong.
Does anyone have any ideas?

HI,
can you please provide the logs for the issue?

Help req'd using VideoPier with iMovie 08

Similar Messages

Maybe you are looking for