Help reqd regarding stock

Hello Gurus
Pls help me how to get the stock (Inventory)
by bin location wise  in plant
Is there any Tcode is availeble
Or  form Which table i can able to get the details
Pls help
Rgds
Surya

Dear Kunal
Organsiation levels is like this
Company code
Plant
Storage lcoatio
Bin Location
I hope it wil clarifies
Pls help
Rgds
Surya

Similar Messages

  • Urgent Help Reqd: Delta Problem....!!!

    Hi Experts,
    Urgent help reqd regarding follwoing scenario:
    I am getting delta to ODS 1 (infosource : 2LIS_12_VCHDR) from R/3. Now this ODS1 gives delta to Cube1. I got one error record which fails when going to cube (due to master data check).And this record would be edited later.
    So I thought of re loading cube and using error handling to split request in PSA and load valid records in cube.Later when I have coorect info abt error, I would load erroneous record manually using PSA.
    I did following steps:
    1)Failed request is not in cube...(setting is PSA and then into target)....also it has been deleted from PSA.
    2)Remove data status from source ODS1.
    3)Change error handling in infopackage to valid " Valid records update, reporting possible".
    4)start loading of cube.
    But when I did this I got following message :
    <b> "Last delta update is not yet completed.Therefore, no new delta update is possible.You can start the request again if the last delta request is red or green in the monitor"</b>
    But both my requests in cube and ODS are Green...no request is in yellow...!!
    Now the problem is :
    1) I have lost ODS data mart status
    2)how to load valid records to cube, since errorneous record can be edited only after 3- 4 days.
    3)How not to affect delta load of tomorrow.
    Please guide and help me in this.
    Thanks in advance and rest assured I will award points to say thanks to SDNers..
    Regards,
    Sorabh
    Message was edited by: sorabh arora

    Hi Joseph,
    Thanks for replying....
    I apolgize and I have modified the message above..
    I just checked in cube...there is no failed request for today...and neither in PSA....Person who has handed this to me may have deleted this is PSA..and why req is not in failed state in cube...I am not sure..though setting is "PSA and then into data package".....
    So how to go frm here....
    Thanks
    Sorabh

  • Help needed Regarding Project Server - 2013 Workflow

    Hi All,
    I am new to Project server 2013 Workflow, hence please help me regarding this. Pardon me if this question is too trivial. 
    I have created a project type associated with a workflow and my workflow is as follows :
    So I am not doing anything here, I am just testing the workflow as mentioned by technet site : http://technet.microsoft.com/en-us/library/dn458865(v=office.15).aspx
    But it is mentioned that, after a minute or 2, the workflow state will change, also they have mentioned to press the Submit button.
    But in my case, the workflow is not moving to next stage [It just says 'The workflow is still processing - which never changes after hours] or I am getting the submit button (Submit button is disabled on the ribbon). Below is the state of my workflow :
    PS : I have made the user added to Portfolio managers group as well. But still I am having this same issue. 
    The Workflow manager is installed properly, and it is working fine in case of List workflow. I am facing the issue only wrt Site workflow for Project server 2013.
    Please help me to solve this issue.
    Thanks,
    shanky

    Hi Kiran,
    I am now facing issue while assigning a task to a person in the workflow.
    I am having a person named say 'John' , who is included in Project Manager as well as Portfolio Manager.
    And I am using a workflow as :
    Stage : Conceptual
    Assign a task to John (Task outcome to Variable: Outcome5 | Task ID to Variable: TaskID3 )
    Transition to stage
    Go to Approval
    But this is again giving issue as :
    Workflow Internal status : Cancelled
    Details: System.ApplicationException: HTTP 401 {"error":{"code":"-2147024891, System.UnauthorizedAccessException","message":{"lang":"en-US","value":"Access denied. You do not have
    permission to perform this action or access this resource."}}}
    PS : I have used the same Sharepoint admin account for 'Account Name' in ‘User Profile Sync' , Is this causing the issue? Please let me know.
    Thanks,
    Shanky

  • Please help me regarding implemenatation of plsql webservices

    hello every one,
    My name is anil, I am working on the topic "building pl/sql web services". I successfully deployed my pl/sql function. But i got an error while invoking the function from a web service.
    my error is
    08/04/22 10:40:23 javax.servlet.ServletException: Cannot generate Class: java.lang.NoClassDefFoundError: com/sun/tools/javac/M
    ain
    Exception in thread "main"
    08/04/22 10:40:23 at oracle.j2ee.ws.RpcWebService.generateWrapperClass(RpcWebService.java:569)
    08/04/22 10:40:23 at oracle.j2ee.ws.RpcWebService.generate(RpcWebService.java:467)
    08/04/22 10:40:23 at oracle.j2ee.ws.RpcWebService.getWrapper(RpcWebService.java:614)
    08/04/22 10:40:23 at oracle.j2ee.ws.RpcWebService.doGetRequest(RpcWebService.java:725)
    08/04/22 10:40:23 at oracle.j2ee.ws.BaseWebService.doGet(BaseWebService.java:1199)
    08/04/22 10:40:23 at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
    08/04/22 10:40:23 at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
    08/04/22 10:40:23 at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:691)
    08/04/22 10:40:23 at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370
    08/04/22 10:40:23 at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
    08/04/22 10:40:23 at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
    08/04/22 10:40:23 at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:221)
    08/04/22 10:40:23 at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:122)
    08/04/22 10:40:23 at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:111)
    08/04/22 10:40:23 at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
    08/04/22 10:40:23 at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.ja
    va:303)
    08/04/22 10:40:23 at java.lang.Thread.run(Unknown Source)
    please help me

    SowmyRaj wrote:
    But i am unable to run it successfully...please help me regarding this... No wonder. Script is full of entries:
    **MOBILE CODE**Modify script:
    1. Change:
    **MOBILE CODE** immediateto:
    execute immediate2. Change:
    **MOBILE CODE**to:
    end ifRun the script. If you will run it second time, change:
    u_exist PLS_INTEGER;
    t_exist PLS_INTEGER;
    ts_exist PLS_INTEGER;
    ss_exist PLS_INTEGER;to:
    u_exist PLS_INTEGER := 1;
    t_exist PLS_INTEGER := 1;
    ts_exist PLS_INTEGER := 1;
    ss_exist PLS_INTEGER := 1;This way existing objects will be dropped before recreating them.
    SY.

  • Hi can anyone help me. I have a apple macbook laptop OSX 10.5.8 . When i push print, it shows my printer but says cannot communicate with printer. (epson stylus nx125). Do I need new drivers? Please help .  regards Cindy

    Hi can anyone help me. I have a apple macbook laptop OSX 10.5.8 . When i push print, it shows my printer but says cannot communicate with printer. (epson stylus nx125). Do I need new drivers? Please help .  regards Cindy

    Welcome to Apple Support Communities. We're users here and do not speak for "Apple Inc."
    Some basic printer troubleshooting steps before worrying about a printer driver:
    1. Have you tried turning the printer off and back on?
    2A. Is the printer attached with a cable?
         If yes, have you tried unplugging and re-plugging both ends of the printer cable?
         If that does not help, can you test the printer with another cable?
    2B. If your printer is not connected to the computer with a cable, have you tried restarting your printer (assuming wireless connection)?
         Have you tried restarting your wireless router?
    3. Have you tried restarting your MacBook? (Be sure to save your work first.)
    4. Does the printer have ink? (Doesn't usually generate a 'communications error' though)
    5. Have you updated OS X or the program you're trying to print from recently?

  • Error in MIRO Help Reqd

    I have setup new instance. Created p.o & done MIGO things worked fine. In MIRO typically error is seen in tax code. I have assigned Tax procedure TAXGB to country IN. In Fin Acct in tax on sales & purchases defined new taxcode VX with country option IN. Still during MIRO its showing error Tax code VN & Country IN doesnot exist in procedure TAXGB. In error msg its M8 249 & origin is shown as check invoice document.
    Help reqd from SAP Gurus pls.
    Regards

    Check these links
    while doing MIRO, i am getting error:-Tax code V0 country IN does not exist
    Tax code Z4 country IN does not exist in procedure TAXINJ
    Tax code V0 country IN does not exist in procedure TAXINN
    Tax code V0 country IN does not exist in procedure TAXINN

  • Help needed regarding BADI.

    hi all,
    can anyone plz tell me how to define BADI and how create an interface.
    plz tell from everything regarding that, i have work with basic ABAP only.
    anykind of links and any kind of matter will be helpful and you will be rewarded with points for your help difinatly.
    regards.
    raman.

    Hi Raman,
    Please search the forum and you have lots and lots of links in it. For you to start with, try these links,
    The specified item was not found.
    BADI
    Best Regards.

  • Help needed regarding font sizes

    Iam generating pdf documents using oracle developer's report builder.
    When i generate and view those pdf's using the web previewer thay appear to be quite fine,whereas when i host them on ias the font sizes gets bigger, thus lot of text gets truncated.
    Is there any parameters that has to be set for it.Pls help

    Hi Amit,
    Thanks alot for your reply. Its really helpful for me.
    So,we usually enter these relationships manually only, right? Before going ahead with the custom program, could you please let me know whether there is any SAP note related to this.Once again thanks alot for you help.
    Regards,
    Kishore.

  • Help needed regarding the updation of "Relationships" in BP

    Hello Guys,
    This is to request you to kindly help me regarding the following.
    We have a scenario where all the employees assigned to an Organizational unit (in PPOMA_CRM) are not showing in the "Relationships" ("Has Employee")in the BP transaction of that Organizational Unit.
    Could anyone let me know whether there is any update program that updates the "Relationships" from the Organizational asssignment. Or we need to enter the employees manually in BP "Relationships". Please help. Thanks in anticipation.
    Regards,
    Kishore.

    Hi Amit,
    Thanks alot for your reply. Its really helpful for me.
    So,we usually enter these relationships manually only, right? Before going ahead with the custom program, could you please let me know whether there is any SAP note related to this.Once again thanks alot for you help.
    Regards,
    Kishore.

  • RE: Help required regarding to upgrade from R/3 4.6c to mySAp ERP 2005

    Hi there
    I need help as we are planning to upgrade from R/3 4.6C to my SAP ERP 2005, I need the help in the context that
    . How much it will effect the prevoius functionalities, business processes user exits, reports, transactions and etc which thing one should have to keep in mind I need an general overview on this.
    2. What is the SAP best practice for Upgrade.
    3. Which things should be consider before upgrade.
    Thanks and Kind Regards
    Sohail

    Hi Sohail,
    For functional improvement between the releases you can find information in the release notes for example http://service.sap.com/releasenotes
    Also you can find http://service.sap.com/upgrade for very useful entrypoint for any information regarding upgrade.
    For more information, please check this links.
    http://www.sap.com/solutions/business-suite/erp/pdf/BWP_ERP2006_Upgrade.pdf
    http://www.sap.com/solutions/business-suite/erp/index.epx
    https://websmp103.sap-ag.de/~form/handler?_APP=00200682500000001266&_EVENT=DISPLAY
    Hope this will help.
    Regards,
    Ferry Lianto
    Please reward points if helpful.

  • Please help me regarding the running of a sql file

    Hi I downloaded one sql file from
    http://www.cs.uwf.edu/~sbagui/db/practical_oracle.htm
    But i am unable to run it successfully...please help me regarding this... thanking you
    Edited by: SowmyRaj on Dec 24, 2009 5:24 AM

    Hi vali thanks for your reply...
    I am using Windows XP sp2 Os.
    and Oracle database 11g ...
    when executing this file the follwing error is occuring
    Enter value for user_name: system
    old 2: uname VARCHAR(50) := '&user_name';
    new 2: uname VARCHAR(50) := 'system';
    **MOBILE CODE** immediate 'drop user ' ||uname;
    ERROR at line 13:
    ORA-06550: line 13, column 1:
    PLS-00103: Encountered the symbol "*" when expecting one of the following:
    ( begin case declare exit for goto if loop mod null pragma
    raise return select update while with <an identifier>
    <a double-quoted delimited-identifier> <a bind variable> <<
    continue close current delete fetch lock insert open rollback
    savepoint set sql execute commit forall merge pipe purge

  • My station is listed on Itunes Radio stations, but there's a problem with the connection. Does any body help us regarding this issue? The station name is KRAL FM under the Top 40 / Pop category

    My station is listed on Itunes Radio stations, but there's a problem with the connection. Does any body help us regarding this issue? The station name is KRAL FM under the Top 40 / Pop category

    My station is listed on Itunes Radio stations, but there's a problem with the connection. Does any body help us regarding this issue? The station name is KRAL FM under the Top 40 / Pop category

  • I bought an ipod in 2006 and used it only for a few days, and i lost it when it fell two times from my hand and it wasn`t working, help me regarding this.

    i bought an ipod in 2006 and used it only for a few days, and i lost it when it fell two times from my hand and it wasn`t working, help me regarding this.
    REGARDS
    RISHABH AULIYA

    Apple - Support - iPod - Repair pricing - http://www.apple.com/support/ipod/service/prices/
    ipod repair options - https://discussions.apple.com/thread/3900047 and https://discussions.apple.com/message/18867033
    Service Answer Center - iPod - http://support.apple.com/kb/index?page=servicefaq&geo=US&product=ipod  <-- enter correct country once on page.

  • I am facing a problem in my IPod . it is not detected by computer i tried every possible thing i changed cable i installed new itunes still its not coming up in itunes. can you please help me regarding this problem.

    i am facing a problem in my IPod . it is not detected by computer i tried every possible thing i changed cable i installed new itunes still its not coming up in itunes. can you please help me regarding this problem.

    This is for Windows: http://support.apple.com/kb/TS1538

  • Please help me regarding error in jcManager 1.1

    Hi Friends..
    perhaps this question especially for bebecanu, but perhaps i hope all of you could help me too.. :)
    i tried to learn how way jcManager works, so i downloaded the jcManager1.1 source..
    i created new application in Netbeans 6.9, and then i copied all of files in the jcmanager.source..
    i've set the libraries needed also in Netbeans, i've added the libraries of jpcsc.jar and looks-2.1.4.jar , so assume that there's no error while compile time..
    but while runtime, there's message error displayed in the TextArea..
    this is the message error :
    Exception in thread "Thread-3" java.lang.NoClassDefFoundError: Could not initialize class com.linuxnet.jpcsc.PCSC
         at com.braicu.jcm.card.CardWorker.disconnectCard(CardWorker.java:507)
         at com.braicu.jcm.JCManager$22.construct(JCManager.java:620)
         at com.braicu.jcm.layout.MySwingWorker$2.run(MySwingWorker.java:108)
         at java.lang.Thread.run(Thread.java:619)so, how to initialize class com.linuxnet.jpcsc.PCSC in Netbeans?..
    Please help me regarding this..
    Thanks in advance..

    Hi
    You need to have jpcsc.dll (you may find it in the res folder) in your java library path.
    So, all you need to do is to specify this VM argument on running:
    -Djava.library.path=res
    Hope it helps
    Stefan

Maybe you are looking for