Help requested with Windows Portable Directories

Setup:
Tiger Server 10.4.11
Everything is setup up perfectly and all Mac users can login and use their portable home directories. Everything works great.
Here's my question:
Is it possible to replicate the same behavior when logging in from Windows XP?
I setup a test user (WINUSER) and pointed him to the same share I use for the Mac home directories.
How do I set it up so that when I log in with this user from Windows XP, that Windows XP creates a local account and syncs it with the Mac OS X server (the same way that the Mac laptops do it).
Any help would be greatly appreciated.
Thanks

Figured it out.

Similar Messages

Help needed with Windows

Hi All
Hope you can help as i am basically a Linux user who has a new laptop, Lenovo G700. I will be putting Linux on eventually but until then i have decided to have a go with Windows and have got ...... nowhere. I have done all the windows updates i then go to the windows 8 store and download the upgrade to windows 8.1 the update downloads, installs but during installation the computer reboots the installation continues (i presume thats what it s doing) the installation appears to finish and the computer reboots again and during checking devices it gets to about 25% and the screen appears to have powered off but it is still running then after 20 to 30 min it goes to sleep and pressing the power key wakes it up again at this point the only option is to press and hold the power key and the machine restarts and says the update has failed a reverts back to windows 8.
Things i have tried -
Restored to laptop to factory default
installed all windows updates
updated the grafix and network drivers to latest versions
windows 8.1 still fails to install.
I have checked the compatability list and the G700 shows a s conpatable with windows 8.1
Summary
Operating System
Windows 8 64-bit
CPU
Intel Core i5 3320M @ 2.60GHz 35 °C
Ivy Bridge 22nm Technology
RAM
8.00GB Dual-Channel DDR3 @ 798MHz (11-11-11-28)
Motherboard
LENOVO G700 (U3E1) 37 °C
Graphics
Generic PnP Monitor (1600x900@60Hz)
Intel HD Graphics 4000 (Lenovo)
1024MB NVIDIA GeForce GT 720M (Lenovo)
Storage
931GB Seagate ST1000LM024 HN-M101MBB (SATA) 33 °C
Optical Drives
MAT**bleep**A DVD-RAM UJ8D1
Audio
IDT High Definition Audio CODEC
Operating System
Windows 8 64-bit
Computer type: Notebook
Installation Date: 26/12/2013 11:34:21
Serial Number:
Windows Security Center
User Account Control (UAC) Enabled
Notify level 2 - Default
Firewall Enabled
Windows Update
AutoUpdate Download Automatically and Install at Set Scheduled time
Schedule Frequency Every Day
Schedule Time
Windows Defender
Windows Defender Disabled
Antivirus
avast! Antivirus
Antivirus Enabled
Company Name AVAST Software
Product Version 9.0.2011
Virus Signature Database Up to date
Windows Defender
Antivirus Disabled
Virus Signature Database Up to date
.NET Frameworks installed
v4.5 Full
v4.5 Client
v3.5 SP1
v3.0 SP2
v2.0 SP2
Internet Explorer
Version 10.0.9200.16750
PowerShell
Version 3.0
Environment Variables
USERPROFILE C:\Users\suebea
SystemRoot C:\windows
User Variables
TEMP C:\Users\suebea\AppData\Local\Temp
TMP C:\Users\suebea\AppData\Local\Temp
Machine Variables
ComSpec C:\windows\system32\cmd.exe
configsetroot C:\windows\ConfigSetRoot
FP_NO_HOST_CHECK NO
NUMBER_OF_PROCESSORS 4
OS Windows_NT
Path C:\Program Files (x86)\NVIDIA Corporation\PhysX\Common
C:\Program Files (x86)\Intel\iCLS Client\
C:\Program Files\Intel\iCLS Client\
C:\windows\system32
C:\windows
C:\windows\System32\Wbem
C:\windows\System32\WindowsPowerShell\v1.0\
C:\Program Files (x86)\Intel\OpenCL SDK\2.0\bin\x86
C:\Program Files (x86)\Intel\OpenCL SDK\2.0\bin\x64
C:\Program Files\Intel\Intel Management Engine Components\DAL
C:\Program Files\Intel\Intel Management Engine Components\IPT
C:\Program Files (x86)\Intel\Intel Management Engine Components\DAL
C:\Program Files (x86)\Intel\Intel Management Engine Components\IPT
C:\Program Files\Lenovo\Bluetooth Software\
C:\Program Files\Lenovo\Bluetooth Software\syswow64
PATHEXT .COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC
PROCESSOR_ARCHITECTURE AMD64
PROCESSOR_IDENTIFIER Intel64 Family 6 Model 58 Stepping 9, GenuineIntel
Also my wifi keeps coming up with limited.
Any help you can give would be greatly appreciated
Thanks

Ok so maybe the title put people off
I'm still having the same problem and after having a brief scan so are other people with no actual answers. Is this a problem with the G series or all Lenovo products ?
Seriously concidering taking this laptop back and getting a different manufacurer who offers actual support unlike the joke of a support system Lonovo has !!
I did find this link
http://forums.lenovo.com/t5/Windows-8-and-8-1-Knowledge-Base/Failure-configuring-Windows-Updates-Win...
which we tried but it still gets to about 15% and nothing..... nada.... zilch. Hard reset and hello windows 8
Please..... Please.... Please can someone help me before my nice new christmas present becomes a projectile through the window (no pun intended).

Help requested with White Balance

This may come as a surprise to many, but here I am requesting your help, instead of giving it.
I have filled out a feature request with the following content, already some time ago:
Would it not be nice to be able to extract the WB settings in K from the metadata and be able in post to change it to what you should have done during the shoot.
Say your WB is set to 5600 K, you can extract that from the metadata and with the White Balance effect you can enter a desired setting of say 6100 K. During the shoot you can do that with the Canon XF series, but if you have forgotten to use a warm card instead of the white balance card, this would be a great effect to have. Or in the situation where you simply want a shot to be slightly cooler or warmer, this would be a great feature.
Interface similar to the scale slider and fully keyframeable. The program monitor should reflect changes in color temperature immediately. Simple, easy to understand, like using a set of Warm Cards after the shoot.
Retrieval of the color temperatures should not be difficult. It is contained in the metadata:
It works both with AWB and manual for the XF series. If the camera does not record these data, the effect should be greyed out.
I request your help to get this feature implemented, since it is pretty simple to implement, is a great help to have when doing multicam work, to fine tune different cameras or to change the atmosphere of a shot. It is far easier than the color correction effects we already have.
If you agree with me, please fill out a similar feature request. The more requests made, the greater the chance of it being implemented.
See Feature Request Form

Harm, I've seen instances of multi-cam shoot cameras that were identical models, using a clone of the settings which still resulted in differences in color. I've seen this blamed on the chips and the chip manufacturing process. I've also seen multicam footage from analog cameras that were supposedly balanced before shooting that resulted in shifts. And then, you have a situation where the atmospherics can alter the color, such as when one camera is close to the action, and the distant camera is shooting through fog or haze that has light shooting through it.
So again, while you can get in the ballpark with certain regimes, when it comes time to finish, you have to trust your eyes.
So, for my situation, it's not something that rises to the level of something I'd use enough to warrant a feature request.
My biggest issue today is that I'd love to see Pr offering bottom-up rendering, the way Avid MC offers it with its Render All option vs. Smart Rendering, which is top down. I don't like that I have to re-render entire sequences just because I made a little change to an upper layer clip. That, to me, warrants a concerted campaign or pitchfork mob.
But, I'll make a pact with you. If you'll request bottom up rendering, I'll request WB metadata support, OK?

BT Desktop Help Incompatible with Windows 8.1

After updating my PC from Windows 8 to Windows 8.1 (64-bit) - I found the Windows Desktop Help wouldn't run. I had earlier updated BT Help to it's latest version.
The error I got was:
Minimum specification
We have detected that you are using an operating system not currently supported by BT Desktop Help. The supported operating systems are :
Windows XP SP1 or higher (32-bit)
Windows Vista
Windows 7
Windows 8
This isn't a particularly high priority issue, but it is irritating and as Windows 8.1 has been trailed for quite a while now it does seem a little embarrassing to BT that they couldn't have resolved this in their latest BT Help release.

Had the same problem... updated to W 8.1 on the given hour, then just an hour or so later had a info window to update my dth... then got the same incompatibility info window as mentioned above. As already said, 8.1 has been available for developers for some considerable time, just what we have come to expect from BT I guess. The BT vision OS [Oregon?] is absolute **bleep**, we cancelled ours its so bad, continual freezing & certainly less intuitive than the old os. I emailed bt earlier regarding 8.1 & dth this is before i read this posting, i got back a long winded 'fix' [see below, but dont waste your time trying it! as others have said dth is a load of **bleep** & didnt work properly anyways]... what a bunch of a-h's when they know dth doesn't work with 8.1!!! I have a dislike for Murdock & all he stands for but through necessity, can see us going with sky next year... been with BT for a good few years, the past 2 have seen service, both technical & practical plummit at an alarming & continuing rate..
disgusted!!!
Recently you requested personal assistance from our on-line support centre. Below is a summary of your request and our response.
If this issue is not resolved to your satisfaction, you may reopen it within the next 14 days.
Thank you for allowing us to be of service to you.
Subject
T - BT Desktop help
Discussion Thread
Response (Sunanda Sao)
22/10/2013 12:46 PM
Dear Mr.......
Thank you for your email dated 22nd October, 2013 and it has been logged under the reference number VOL012-.
As I gather from the email that you are having problem with the Desktop Help. I understand how important it is for our customer to have a BT Broadband connection with all the available services, and apologise for all the inconvenience caused and would definitely help you in this regard.
Due to the complex nature of your issue I felt that it would have been more beneficial to resolve this through an interactive session as some technical faults can be quite complex but as you have requested I am sending an e-mail response to resolve your issue.
Uninstall Bt Broadband Desktop help:-
01. Go to Start --> Control Panel --> Add/Remove Programs.
02. Scroll down to your Broadband Desktop help
03. Click Change --> Remove All.
04. You will be asked to restart your PC. Please restart the PC.
05. Now go to Start --> My Computer --> Program Files. Right click on each of your Broadband Desktop help folder and select Delete.
06. While you are in Program Files go to the Common Files folder at or near the top of the Program Files window. Delete every Broadband Desktop help folder there.
07. Please restart your PC again.
08. Now Go to Start --> Search --> All Files and Folders --> More Advanced Options. Check each option except for "Case sensitive"
09. Now please type in, the name of your Broadband Desktop help program and delete each folder of your Broadband Desktop help from the search results (Again,right click, choose "Delete").
10. Please restart your PC again
Please click on the provided link below to install BT Desktop Help on you computer:
http://bt.custhelp.com/app/answers/detail/a_id/12941/kw/Desdktop%20help/c/346,402,1159.
If you still face the same issue you can contact us on 0800 111 4567 as well open 24*7
If there’s anything else you’d like to know, please try our help pages online at www.bt.com/help . You can also see the various ways you can contact us if you do need further assistance. Many technical problems can be immediately fixed using our desktop help tool. This FREE tool helps you sort out most common broadband connection and email problems, keeping you connected when you need it most. You can download and start using it now by accessing www.bt.com/help/broadbanddesktophelp.
Thank you for using BT Broadband Technical Helpdesk,
Sunanda Sao
BT Digital Care
This email contains BT information, which may be privileged or confidential. It's meant only for the individual(s) or entity named above. If you're not the intended recipient, note that disclosing, copying, distributing or using this information is prohibited. If you've received this email in error, please let me know immediately on the email address above. Thank you. We monitor our email system, and may record your emails.
British Telecommunications plc
Registered office: 81 Newgate Street London EC1A 7AJ Registered in England no: 1800000
This email contains BT information, which may be privileged or confidential. It's meant only for the individual(s) or entity named above. If you're not the intended recipient, note that disclosing, copying, distributing or using this information is prohibited. If you've received this email in error, please let me know immediately on the email address above. Thank you. We monitor our email system, and may record your emails.
British Telecommunications plc
Registered office: 81 Newgate Street London EC1A 7AJ
Registered in England no: 1800000
[---001:003252:01020---]

Help needed with Windows 8.1 boot and recovery issue

Hi. I hope someone can help me out with this Windows 8.1 issue. A friends computer (HP 2000-2c27CL Notebook) was badly infected and while I was able to do some cleaning in normal Windows I had to do some in Safe Mode. I was not being able to access Safe Mode so I went to Advanced Startup Options in Windows 8, Troubleshoot, then Advanced options, and finally the Command Prompt. Using the command prompt I typed "bcdedit /set {default} safeboot network" to have Safe Mode with Networking. Ever since I did that I haven't been able to get Windows to do a normal boot. I always get Safe Mode. I can't get back to Advanced Startup Options either. Via msconfig in Safe Mode I selected the Normal startup button on the General tab and selected apply and then ok. It then prompted me to restart the computer which I did. This did not fix the issue as I continue to get Safe Mode every time I start the computer. I also tried to do a complete system restore by typing "Recovery" in Windows 8 which brought up the HP Recovery Manager. Once in there I selected the Windows Recovery Environment and it prompted me to reboot the computer. I was expecting to get to an area where I could do a complete factory restore, but I again got booted into Safe Mode. What the heck is going on? The person who has this computer has no restore media... no USB or DVD discs made. There is however a recovery partition I believe, but as I said I can't do anything because I keep getting Safe Mode. Also I tried to use a antivirus emergency boot disk with this computer and I could not get it to boot from the DVDRom drive. I went into the BIOS and saw that Legacy is disabled and UEFI appears to be enabled by default. How am I to change the boot order to get it to boot from the disk and do scans for malware? I thought I did it correctly by moving the Rom drive to the top of the list, but that didn't work. I despise Windows 8x!!!
Help with this is greatly appreciated. Thank you.

Hi HPenn, welcome to the HP Forums. Unfortunately if you are unable to perform a recovery using any of the available methods: Performing an HP System Recovery (Windows 8)
You will have to order recovery media: Order software and driver media
I hope this helps.
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Help needed with windows 7 and old deskjet 870Cse not printing

System:
Windows 7 and Deskjet 870Cse.
Because my new laptop does not have the traditional old printer cable port, it only has USB ports, I purchased a USB Parallel printer cable. Hooked it up and system recognized it as a Unspecified Device (IEEE-1284 Controller). It does not recognize it as a printer.
Because it is not recognized I can not print anything.
Any ideas/help on how to get the drivers installed or to have it recognize the printer would be appreciated.
UPDATE:
I was able to get the driver and add a new printer and now can select to print to it. However, the head moves and everything but when the page come out there is nothing on the page.
Any ideas? I know there used to be a program to clean the heads but I don't have that now on this computer or don't know where to find it. Any thoughts?

Hi there mmcdermott,
Try downloading and running the print and scan doctor located here (to ensure there are no problems with the drivers etc installed):
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03275041&cc=us&dlc=en&lc=en
It can fix a lot on its own and if not give a better idea of what is going on.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Help me with Windows 8 UEFI mode

I am using the latest bios for my Z77 GD65, 10.9 BIOS
I have selected BIOS Mode Select: UEFI
And i have installed the Windows 8 in UEFI mode. Both of my partitions have GPT conversion, so uefi mode is installed, in msinfo32, says BIOS Mode: UEFI.
I have 2 problems
1. My debug led from the motherboard doesn't display anymore my CPU temperature, it displays a RO message
2. Is normal that when the Windows 8 boots, it shows me the Msi Logo, instead of the classic windows logo ?
3. If i want to enable from the BIOS the windows 8 feature, and Secure Boot, it gives me an error something with a logo graphics card, and some thing called GOP.

Quote
Is normal that when the Windows 8 boots, it shows me the Msi Logo, instead of the classic windows logo ?
Should be a s it is directly booting from the board's UEFI.
Quote from: CalinTM
If i want to enable from the BIOS the windows 8 feature, and Secure Boot, it gives me an error something with a logo graphics card, and some thing called GOP
To enable Windows 8 features the vga's vbios needs to be GOP (Graphics Output Protocol) compliant.
Quote from: http://www.uefi.org/learning_center/UPFS11_P4_UEFI_GOP_AMD.pdf
The Graphics Output Protocol (GOP) is enabled by UEFI driver to support graphic console output in the pre-OS phase.
The ultimate goal of GOP is to replace legacy VGA BIOS and eliminate VGA HW functionality.
You can request a GOP vbios for the GTX680 Lightning: Quote from: https://forum-en.msi.com/index.php?topic=167763.0
>>GOP / UEFI Vbios requests - Read Here First<<

Help requested with 645 Ultra-C with a PCI ATA/133 card fitted

I'm new here, so please bear with me if this plea for help is short of info :-
I built my PC 5 years ago, using a 645 Ultra-C board ( MS-6547 2.00 ) and have had no problems since - till now.
I recently installed a PCI ATA/133 card, mainly to be able to add 2 additional hard drives. It installed ok and the 2 extra drives are recognised correctly on the card's primary channel as is a DVD device on the secondary channel.
However, on initial booting, the card is interrogated to determine what devices are connected to it and then there is a delay of up to 2 minutes ( it feels like forever ) while BootMagic is being searched for/loaded.
It makes no difference if I swap the 2 drives and the dvd over or remove the dvd drive.
The bios ( AMI 07.00T 12/20/01 ) is correctly setup to boot from floppy first, then HDD1 ( connected to the mainboard's primary channel) and 'try other boot devices' is disabled.
I have no wish to boot from the extra drives, so is there any way of avoiding the boot system from looking there first ? Is there any other bios settings to consider ?
I'd be grateful for any hints/help.
Thanks.

Quote from: Del UK on 26-January-08, 06:45:25
Yes,
Go into bios and set boot sequence
Also go into pci controller bios, and set no boot
It's usually CRTL+A or CRTL+M keys on keyboard............
Controller cards will be main boot target, unless told
I have got the boot sequence set correctly - but I can see no sign of a pci controller bios option. Cntrl A or Cntrl M have no effect. Maybe the 645 bios doesnt offer those options.
I have never updated the bios - being of the 'if it aint broke dont change it' school of thought, so I may need to look at this area, now.
I'll be posting a question here about live update very soon - basically 'is it the best way to update the bios ?'
Thanks for your help so far
John

Help requested with the background of lighting effects

I need help creating a light background when rendering with light effects. I am selecting filter, then render, then lighting effects. From there I am choosing an omni light to create a blue light shining from above on my project. The problem I have is that the blue light fades into black or grey. I need the blue light to disseminate or fade into a white background instead. I have tried all sorts of options with changing the background in the lighting effects menu to no avail. I have photoshop CS3. Any help would be greatly appreciated!
Jim

Could you please post a screenshot with the pertinent Panels and dialog visible?

Help needed with windows oracle services

Hi,
I am using Oracle 8.0.6. After installing the database. i wanted to change the INTERNAL password. so i shutdown the oracle services. When i try to start the services 1)OracleServiceORCL ,2)OracleStartORCL, the first service is starting but the second service hangs up.
Could anyone plss tell me if i can delete this service and recreate other. Plss describe the steps in detail.

ateeqrahman wrote:
Hi,
I am using Oracle 8.0.6. After installing the database. i wanted to change the INTERNAL password. so i shutdown the oracle services. When i try to start the services 1)OracleServiceORCL ,2)OracleStartORCL, the first service is starting but the second service hangs up.
Could anyone plss tell me if i can delete this service and recreate other. Plss describe the steps in detail.Is this a new installation or has it been working for some time?
What OS?
If it is new, why Oracle 8.0? It was never designed to work with any current operating system and I would be surprised if anything about it works.

Help requested with major crashes and start-up probs with a G5 & OS 10.4.7

Not sure if this post should be on Tiger OS or hardware ...
I have had my G5 for 14 months. It runs with a 20" Apple CRT monitor
It has just developed quite serious problems. These have two elements
- Three days ago, while writing a mail message, vertical bars came down over the message and the 'need to restart' alert came up
- when attempting to restart I couldn't. The G5 start up sound was heard but the monitor button remained amber. When I did nothing the fans ran unti I forced it to close down
This persisted during several attempts to restart and while trying with the shift key held down
Later that day the machine started
I ran Disk utilities (checking disk and repairing permissions)
I ran Disk Warrior (no problems reported)
Both elements of this problem - the bars and restart message and the failure to fully restart - have occurred several times in the last three days. The problem may occur after 10 minutes or a couple of hours. It may then take many attempts to get the machine to start up. When it does, there is no pattern to explain why it has
Currently, everything apart from the monitor, key board and router are disconnected
Nonetheless, I expect to find myself 'behind bars' again soon
Any advice would be much appreciated

Hi norpsych;
It sounds like you are having kernel panics. Generally they are caused by hardware problems. I would suggest you disconnect everything and run the Apple Hardware Test from the install media that came with you system.
Allan

Help requested with Importing a website's CA certificate into my Java App

Hello everyone,
First of all, I'm not sure if this is the right category for my question, so if not please move it appropriately.
I'm creating a desktop application that will update your IPv4 address to Tunnelbroker (Hurricane Electric's IPv6 tunnel service). Right now it's about 76% complete, and I'm testing it out. My problem is this: Tunnelbroker uses their own CA Certificate (SSL) for their https:// connection, and it's not valid in Java/Netbeans. So, whenever I try to update the IPv4 address, I get the following Can't read from the Internet: javax.net.ssl.SSLHandshakeException: java.security.cert.CertificateException: No name matching ipv4.tunnelbroker.net foundThe website is https://ipv4.tunnelbroker.net (so you can verify that it's a valid site/certificate).
I've found workarounds for importing my OWN CA Certificate into the application (or Netbeans), but nothing about importing a valid third-party CA Certificate into the application (or Netbeans). I've posted this question to the Netbeans forums--but have yet to receive anything from them. Also, I've found workarounds for trusting all certificates (although I'm not sure how to implement that into my application).
What I'm looking for is either a) how to import the certificate into my application, so the user won't have to deal with it b) a workaround to bypass the security check c) any other method of getting over this hurdle.
I'd say I'm an intermediate developer, so pointing me to something like "Adding a Certificate Exception" is fine, except that I need to know whether I can take everything inside of the main method and put it as it's own method somewhere (or do I need to create an entire class for that portion).
Also, I don't necessarily want to use the "Trust All Certificates" method. Even though the end-user won't be able to change the site, I don't want to create that much of a security hole.
Thank you for any assistance in this. (As an aside note, this will enable me to finally mark another "open" question as answered, as I haven't been able to test it yet because of this issue).
Have a great day:)
Patrick.

EJP wrote:
1. It should be in the directory of the JRE, not the JDK. The end user won't have one.
2. Dunno, I would think so.
3. This is a step for the end user to perform, not you. You don't want to be telling the end user who to trust, for all kinds of legal liability reasons. You want him to decide.Hello again.
I have an update to this. I found out that the domain tunnelbroker.net is in my cacerts (at least if I run a small program to test the SSL Certificate for the site), however since it doesn't list ipv4.tunnelbroker.net as an alternative (that I can see), this is why I'm getting the SSL HandshakeException error.
Here is the script that I ran (compiled and then used java -Djavax.net.debug=all TestSSL https://ipv4.tunnelbroker.net to run it.
import java.io.BufferedReader;
import java.io.InputStream;
import java.io.InputStreamReader;
import java.net.URL;
import java.net.URLConnection;
* @author Daryl Banttari
public class TestSSL {
    public static void main(String[] args) {
        // default url:
        String urlString = "https://www.paypal.com/";
        // if any url specified, use that instead:
        if(args.length > 0) {
            urlString = args[0];
        System.out.println("Connecting to " + urlString + "...");
        try {
            // convert user string to URL object
            URL url = new URL(urlString);
            // connect!
            URLConnection cnx = url.openConnection();
            cnx.connect();
            // read the page returned
            InputStream ins = cnx.getInputStream();
            BufferedReader in = new BufferedReader(new InputStreamReader(ins));
            String curline;
            while( (curline = in.readLine()) != null ) {
                System.out.println(curline);
            // close the connection
            ins.close();
        catch(Throwable t) {
            t.printStackTrace();
}And here are the results of the complete debugging ***** WARNING there's a lot here ****
>
Connecting to https://ipv4.tunnelbroker.net...
keyStore is :
keyStore type is : jks
keyStore provider is :
init keystore
init keymanager of type SunX509
trustStore is: /usr/lib/jvm/java-6-openjdk/jre/lib/security/jssecacerts
trustStore type is : jks
trustStore provider is :
init truststore
< ... Snipped to conserve space... >
adding as trusted cert:
Subject: OU=RSA Security 1024 V3, O=RSA Security Inc
Issuer: OU=RSA Security 1024 V3, O=RSA Security Inc
Algorithm: RSA; Serial number: 0xa0101010000027c0000000b00000002
Valid from Thu Feb 22 15:01:49 CST 2001 until Sun Feb 22 14:01:49 CST 2026
adding as trusted cert:
Subject: [email protected], CN=tunnelbroker.net, OU=IPV6, O="Hurricane Electric, LLC", L=Fremont, ST=California, C=US
Issuer: [email protected], CN=tunnelbroker.net, OU=IPV6, O="Hurricane Electric, LLC", L=Fremont, ST=California, C=US
Algorithm: RSA; Serial number: 0xbc201a57ebb49897
Valid from Tue Jul 10 20:35:31 CDT 2007 until Fri Jul 07 20:35:31 CDT 2017
adding as trusted cert:
Subject: CN=VeriSign Class 3 Public Primary Certification Authority - G3, OU="(c) 1999 VeriSign, Inc. - For authorized use only", OU=VeriSign Trust Network, O="VeriSign, Inc.", C=US
Issuer: CN=VeriSign Class 3 Public Primary Certification Authority - G3, OU="(c) 1999 VeriSign, Inc. - For authorized use only", OU=VeriSign Trust Network, O="VeriSign, Inc.", C=US
Algorithm: RSA; Serial number: 0x9b7e0649a33e62b9d5ee90487129ef57
Valid from Thu Sep 30 19:00:00 CDT 1999 until Wed Jul 16 18:59:59 CDT 2036
adding as trusted cert:
Subject: CN=AddTrust Class 1 CA Root, OU=AddTrust TTP Network, O=AddTrust AB, C=SE
Issuer: CN=AddTrust Class 1 CA Root, OU=AddTrust TTP Network, O=AddTrust AB, C=SE
Algorithm: RSA; Serial number: 0x1
Valid from Tue May 30 05:38:31 CDT 2000 until Sat May 30 05:38:31 CDT 2020
adding as trusted cert:
Subject: CN=CC Signet - PCA Klasa 2, OU=Centrum Certyfikacji Signet, O=TP Internet Sp. z o.o., C=PL
Issuer: CN=CC Signet - RootCA, OU=Centrum Certyfikacji Signet, O=TP Internet Sp. z o.o., C=PL
Algorithm: RSA; Serial number: 0x3cbede10
Valid from Thu Apr 18 09:54:08 CDT 2002 until Mon Sep 21 10:42:19 CDT 2026
< ... Snipped to conserve space... >
trigger seeding of SecureRandom
done seeding SecureRandom
Allow unsafe renegotiation: false
Allow legacy hello messages: true
Is initial handshake: true
Is secure renegotiation: false
%% No cached client session
*** ClientHello, TLSv1
RandomCookie: GMT: 1286668278 bytes = { 67, 34, 247, 171, 23, 198, 239, 55, 170, 174, 198, 240, 212, 155, 66, 209, 111, 146, 87, 177, 42, 3, 70, 62, 239, 10, 223, 89 }
Session ID: {}
Cipher Suites: [SSL_RSA_WITH_RC4_128_MD5, SSL_RSA_WITH_RC4_128_SHA, TLS_RSA_WITH_AES_128_CBC_SHA, TLS_RSA_WITH_AES_256_CBC_SHA, TLS_ECDH_ECDSA_WITH_RC4_128_SHA, TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA, TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA, TLS_ECDH_RSA_WITH_RC4_128_SHA, TLS_ECDH_RSA_WITH_AES_128_CBC_SHA, TLS_ECDH_RSA_WITH_AES_256_CBC_SHA, TLS_ECDHE_ECDSA_WITH_RC4_128_SHA, TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA, TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA, TLS_ECDHE_RSA_WITH_RC4_128_SHA, TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA, TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA, TLS_DHE_RSA_WITH_AES_128_CBC_SHA, TLS_DHE_RSA_WITH_AES_256_CBC_SHA, TLS_DHE_DSS_WITH_AES_128_CBC_SHA, TLS_DHE_DSS_WITH_AES_256_CBC_SHA, SSL_RSA_WITH_3DES_EDE_CBC_SHA, TLS_ECDH_ECDSA_WITH_3DES_EDE_CBC_SHA, TLS_ECDH_RSA_WITH_3DES_EDE_CBC_SHA, TLS_ECDHE_ECDSA_WITH_3DES_EDE_CBC_SHA, TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA, SSL_DHE_RSA_WITH_3DES_EDE_CBC_SHA, SSL_DHE_DSS_WITH_3DES_EDE_CBC_SHA, SSL_RSA_WITH_DES_CBC_SHA, SSL_DHE_RSA_WITH_DES_CBC_SHA, SSL_DHE_DSS_WITH_DES_CBC_SHA, SSL_RSA_EXPORT_WITH_RC4_40_MD5, SSL_RSA_EXPORT_WITH_DES40_CBC_SHA, SSL_DHE_RSA_EXPORT_WITH_DES40_CBC_SHA, SSL_DHE_DSS_EXPORT_WITH_DES40_CBC_SHA, TLS_EMPTY_RENEGOTIATION_INFO_SCSV]
Compression Methods: { 0 }
Extension elliptic_curves, curve names: {secp256r1, sect163k1, sect163r2, secp192r1, secp224r1, sect233k1, sect233r1, sect283k1, sect283r1, secp384r1, sect409k1, sect409r1, secp521r1, sect571k1, sect571r1, secp160k1, secp160r1, secp160r2, sect163r1, secp192k1, sect193r1, sect193r2, secp224k1, sect239k1, secp256k1}
Extension ec_point_formats, formats: [uncompressed]
[write] MD5 and SHA1 hashes: len = 177
0000: 01 00 00 AD 03 01 4D B1 00 F6 43 22 F7 AB 17 C6 ......M...C"....
0010: EF 37 AA AE C6 F0 D4 9B 42 D1 6F 92 57 B1 2A 03 .7......B.o.W.*.
0020: 46 3E EF 0A DF 59 00 00 46 00 04 00 05 00 2F 00 F>...Y..F...../.
0030: 35 C0 02 C0 04 C0 05 C0 0C C0 0E C0 0F C0 07 C0 5...............
0040: 09 C0 0A C0 11 C0 13 C0 14 00 33 00 39 00 32 00 ..........3.9.2.
0050: 38 00 0A C0 03 C0 0D C0 08 C0 12 00 16 00 13 00 8...............
0060: 09 00 15 00 12 00 03 00 08 00 14 00 11 00 FF 01 ................
0070: 00 00 3E 00 0A 00 34 00 32 00 17 00 01 00 03 00 ..>...4.2.......
0080: 13 00 15 00 06 00 07 00 09 00 0A 00 18 00 0B 00 ................
0090: 0C 00 19 00 0D 00 0E 00 0F 00 10 00 11 00 02 00 ................
00A0: 12 00 04 00 05 00 14 00 08 00 16 00 0B 00 02 01 ................
00B0: 00 .
main, WRITE: TLSv1 Handshake, length = 177
[write] MD5 and SHA1 hashes: len = 173
0000: 01 03 01 00 84 00 00 00 20 00 00 04 01 00 80 00 ........ .......
0010: 00 05 00 00 2F 00 00 35 00 C0 02 00 C0 04 01 00 ..../..5........
0020: 80 00 C0 05 00 C0 0C 00 C0 0E 00 C0 0F 00 C0 07 ................
0030: 05 00 80 00 C0 09 06 00 40 00 C0 0A 07 00 C0 00 ........@.......
0040: C0 11 00 C0 13 00 C0 14 00 00 33 00 00 39 00 00 ..........3..9..
0050: 32 00 00 38 00 00 0A 07 00 C0 00 C0 03 02 00 80 2..8............
0060: 00 C0 0D 00 C0 08 00 C0 12 00 00 16 00 00 13 00 ................
0070: 00 09 06 00 40 00 00 15 00 00 12 00 00 03 02 00 ....@...........
0080: 80 00 00 08 00 00 14 00 00 11 00 00 FF 4D B1 00 .............M..
0090: F6 43 22 F7 AB 17 C6 EF 37 AA AE C6 F0 D4 9B 42 .C".....7......B
00A0: D1 6F 92 57 B1 2A 03 46 3E EF 0A DF 59 .o.W.*.F>...Y
main, WRITE: SSLv2 client hello message, length = 173
[Raw write]: length = 175
0000: 80 AD 01 03 01 00 84 00 00 00 20 00 00 04 01 00 .......... .....
0010: 80 00 00 05 00 00 2F 00 00 35 00 C0 02 00 C0 04 ....../..5......
0020: 01 00 80 00 C0 05 00 C0 0C 00 C0 0E 00 C0 0F 00 ................
0030: C0 07 05 00 80 00 C0 09 06 00 40 00 C0 0A 07 00 ..........@.....
0040: C0 00 C0 11 00 C0 13 00 C0 14 00 00 33 00 00 39 ............3..9
0050: 00 00 32 00 00 38 00 00 0A 07 00 C0 00 C0 03 02 ..2..8..........
0060: 00 80 00 C0 0D 00 C0 08 00 C0 12 00 00 16 00 00 ................
0070: 13 00 00 09 06 00 40 00 00 15 00 00 12 00 00 03 ......@.........
0080: 02 00 80 00 00 08 00 00 14 00 00 11 00 00 FF 4D ...............M
0090: B1 00 F6 43 22 F7 AB 17 C6 EF 37 AA AE C6 F0 D4 ...C".....7.....
00A0: 9B 42 D1 6F 92 57 B1 2A 03 46 3E EF 0A DF 59 .B.o.W.*.F>...Y
[Raw read]: length = 5
0000: 16 03 01 00 4A ....J
[Raw read]: length = 74
0000: 02 00 00 46 03 01 4D B1 00 F7 8B D6 E1 5A 42 BB ...F..M......ZB.
0010: D1 66 3D CE D6 7F 41 55 27 58 A2 01 35 FF D0 EA .f=...AU'X..5...
0020: CF 1A 4A 04 B1 D5 20 59 F2 13 A1 03 B2 1F 39 58 ..J... Y......9X
0030: 54 BB DA C2 4C F4 BB 17 54 F0 D7 13 5D B0 23 ED T...L...T...].#.
0040: 3F 31 7D E8 BA 59 62 00 04 00 ?1...Yb...
main, READ: TLSv1 Handshake, length = 74
*** ServerHello, TLSv1
RandomCookie: GMT: 1286668279 bytes = { 139, 214, 225, 90, 66, 187, 209, 102, 61, 206, 214, 127, 65, 85, 39, 88, 162, 1, 53, 255, 208, 234, 207, 26, 74, 4, 177, 213 }
Session ID: {89, 242, 19, 161, 3, 178, 31, 57, 88, 84, 187, 218, 194, 76, 244, 187, 23, 84, 240, 215, 19, 93, 176, 35, 237, 63, 49, 125, 232, 186, 89, 98}
Cipher Suite: SSL_RSA_WITH_RC4_128_MD5
Compression Method: 0
Warning: No renegotiation indication extension in ServerHello
%% Created: [Session-1, SSL_RSA_WITH_RC4_128_MD5]
** SSL_RSA_WITH_RC4_128_MD5
[read] MD5 and SHA1 hashes: len = 74
0000: 02 00 00 46 03 01 4D B1 00 F7 8B D6 E1 5A 42 BB ...F..M......ZB.
0010: D1 66 3D CE D6 7F 41 55 27 58 A2 01 35 FF D0 EA .f=...AU'X..5...
0020: CF 1A 4A 04 B1 D5 20 59 F2 13 A1 03 B2 1F 39 58 ..J... Y......9X
0030: 54 BB DA C2 4C F4 BB 17 54 F0 D7 13 5D B0 23 ED T...L...T...].#.
0040: 3F 31 7D E8 BA 59 62 00 04 00 ?1...Yb...
[Raw read]: length = 5
0000: 16 03 01 02 BF .....
[Raw read]: length = 703
0000: 0B 00 02 BB 00 02 B8 00 02 B5 30 82 02 B1 30 82 ..........0...0.
0010: 02 1A 02 09 00 BC 20 1A 57 EB B4 98 97 30 0D 06 ...... .W....0..
0020: 09 2A 86 48 86 F7 0D 01 01 04 05 00 30 81 9C 31 .*.H........0..1
0030: 0B 30 09 06 03 55 04 06 13 02 55 53 31 13 30 11 .0...U....US1.0.
0040: 06 03 55 04 08 13 0A 43 61 6C 69 66 6F 72 6E 69 ..U....Californi
0050: 61 31 10 30 0E 06 03 55 04 07 13 07 46 72 65 6D a1.0...U....Frem
0060: 6F 6E 74 31 20 30 1E 06 03 55 04 0A 13 17 48 75 ont1 0...U....Hu
0070: 72 72 69 63 61 6E 65 20 45 6C 65 63 74 72 69 63 rricane Electric
0080: 2C 20 4C 4C 43 31 0D 30 0B 06 03 55 04 0B 13 04 , LLC1.0...U....
0090: 49 50 56 36 31 19 30 17 06 03 55 04 03 13 10 74 IPV61.0...U....t
00A0: 75 6E 6E 65 6C 62 72 6F 6B 65 72 2E 6E 65 74 31 unnelbroker.net1
00B0: 1A 30 18 06 09 2A 86 48 86 F7 0D 01 09 01 16 0B .0...*.H........
00C0: 69 6E 66 6F 40 68 65 2E 6E 65 74 30 1E 17 0D 30 [email protected]
00D0: 37 30 37 31 31 30 31 33 35 33 31 5A 17 0D 31 37 70711013531Z..17
00E0: 30 37 30 38 30 31 33 35 33 31 5A 30 81 9C 31 0B 0708013531Z0..1.
00F0: 30 09 06 03 55 04 06 13 02 55 53 31 13 30 11 06 0...U....US1.0..
0100: 03 55 04 08 13 0A 43 61 6C 69 66 6F 72 6E 69 61 .U....California
0110: 31 10 30 0E 06 03 55 04 07 13 07 46 72 65 6D 6F 1.0...U....Fremo
0120: 6E 74 31 20 30 1E 06 03 55 04 0A 13 17 48 75 72 nt1 0...U....Hur
0130: 72 69 63 61 6E 65 20 45 6C 65 63 74 72 69 63 2C ricane Electric,
0140: 20 4C 4C 43 31 0D 30 0B 06 03 55 04 0B 13 04 49 LLC1.0...U....I
0150: 50 56 36 31 19 30 17 06 03 55 04 03 13 10 74 75 PV61.0...U....tu
0160: 6E 6E 65 6C 62 72 6F 6B 65 72 2E 6E 65 74 31 1A nnelbroker.net1.
0170: 30 18 06 09 2A 86 48 86 F7 0D 01 09 01 16 0B 69 0...*.H........i
0180: 6E 66 6F 40 68 65 2E 6E 65 74 30 81 9F 30 0D 06 [email protected]..
0190: 09 2A 86 48 86 F7 0D 01 01 01 05 00 03 81 8D 00 .*.H............
01A0: 30 81 89 02 81 81 00 D7 24 7C 25 2A 7E 69 75 4A 0.......$.%*.iuJ
01B0: 85 01 91 86 60 8F 2C 96 E4 BE 96 E4 B6 36 28 A1 ....`.,......6(.
01C0: 7A 56 53 5C 01 A4 13 C8 6B 96 44 B7 5E 3D C0 60 zVS\....k.D.^=.`
01D0: B9 27 75 D5 A0 72 84 D7 54 C9 48 F4 B2 B4 B4 44 .'u..r..T.H....D
01E0: 0C 3D 90 48 57 F4 17 8D 71 EA 1E F8 4E 6F 88 68 .=.HW...q...No.h
01F0: 4F 5E 30 F9 56 F2 48 F4 57 18 3A 94 89 A9 09 60 O^0.V.H.W.:....`
0200: 19 CD 15 98 88 47 C3 80 E7 50 30 33 DF A9 51 91 .....G...P03..Q.
0210: A4 34 40 09 60 C5 C4 F9 38 7C 7A EB 5A F3 3C 63 .4@.`...8.z.Z.<c
0220: 3D 2D 24 12 08 C6 6F 02 03 01 00 01 30 0D 06 09 =-$...o.....0...
0230: 2A 86 48 86 F7 0D 01 01 04 05 00 03 81 81 00 55 *.H............U
0240: 45 96 28 96 33 CD 36 1C 3A 98 96 8B DE 20 93 99 E.(.3.6.:.... ..
0250: 75 C9 D7 86 94 2E 62 69 C3 80 71 C2 F4 F0 1A 74 u.....bi..q....t
0260: E5 5C 63 37 64 92 60 68 43 50 0F 49 FB A0 90 71 .\c7d.`hCP.I...q
0270: 1C EF 37 3F BF 38 E2 32 55 6C EB 63 C5 6A A1 71 ..7?.8.2Ul.c.j.q
0280: 8B AF 76 0A 49 C6 0A 7C 32 0A 7F 87 9B F3 C5 5B ..v.I...2......[
0290: 1F 98 9C EC 8D 2C 28 E2 DA 83 98 6D 36 6B 7B DE .....,(....m6k..
02A0: E7 E6 26 4A AC E9 3F 84 96 4E CB B6 EC C5 13 5D ..&J..?..N.....]
02B0: 99 45 A0 CB 4B AB BA 08 B7 DF 51 7D CB B7 1F .E..K.....Q....
main, READ: TLSv1 Handshake, length = 703
*** Certificate chain
chain [0] = [
Version: V1
Subject: [email protected], CN=tunnelbroker.net, OU=IPV6, O="Hurricane Electric, LLC", L=Fremont, ST=California, C=US
Signature Algorithm: MD5withRSA, OID = 1.2.840.113549.1.1.4
Key: Sun RSA public key, 1024 bits
modulus: 151078214832725997135839062949249516337507001175872585678208884131491712232432816986255053685674730439436945979324335861205079532450830475393857978740049212402170775011735778076852329233310431150139137152539823492882314808967689085169519290729775244738682251391827885615393137851975032443040800861047648470639
public exponent: 65537
Validity: [From: Tue Jul 10 20:35:31 CDT 2007,
               To: Fri Jul 07 20:35:31 CDT 2017]
Issuer: [email protected], CN=tunnelbroker.net, OU=IPV6, O="Hurricane Electric, LLC", L=Fremont, ST=California, C=US
SerialNumber: [    bc201a57 ebb49897]
Algorithm: [MD5withRSA]
Signature:
0000: 55 45 96 28 96 33 CD 36 1C 3A 98 96 8B DE 20 93 UE.(.3.6.:.... .
0010: 99 75 C9 D7 86 94 2E 62 69 C3 80 71 C2 F4 F0 1A .u.....bi..q....
0020: 74 E5 5C 63 37 64 92 60 68 43 50 0F 49 FB A0 90 t.\c7d.`hCP.I...
0030: 71 1C EF 37 3F BF 38 E2 32 55 6C EB 63 C5 6A A1 q..7?.8.2Ul.c.j.
0040: 71 8B AF 76 0A 49 C6 0A 7C 32 0A 7F 87 9B F3 C5 q..v.I...2......
0050: 5B 1F 98 9C EC 8D 2C 28 E2 DA 83 98 6D 36 6B 7B [.....,(....m6k.
0060: DE E7 E6 26 4A AC E9 3F 84 96 4E CB B6 EC C5 13 ...&J..?..N.....
0070: 5D 99 45 A0 CB 4B AB BA 08 B7 DF 51 7D CB B7 1F ].E..K.....Q....
Found trusted certificate:
Version: V1
Subject: [email protected], CN=tunnelbroker.net, OU=IPV6, O="Hurricane Electric, LLC", L=Fremont, ST=California, C=US
Signature Algorithm: MD5withRSA, OID = 1.2.840.113549.1.1.4
Key: Sun RSA public key, 1024 bits
modulus: 151078214832725997135839062949249516337507001175872585678208884131491712232432816986255053685674730439436945979324335861205079532450830475393857978740049212402170775011735778076852329233310431150139137152539823492882314808967689085169519290729775244738682251391827885615393137851975032443040800861047648470639
public exponent: 65537
Validity: [From: Tue Jul 10 20:35:31 CDT 2007,
               To: Fri Jul 07 20:35:31 CDT 2017]
Issuer: [email protected], CN=tunnelbroker.net, OU=IPV6, O="Hurricane Electric, LLC", L=Fremont, ST=California, C=US
SerialNumber: [    bc201a57 ebb49897]
Algorithm: [MD5withRSA]
Signature:
0000: 55 45 96 28 96 33 CD 36 1C 3A 98 96 8B DE 20 93 UE.(.3.6.:.... .
0010: 99 75 C9 D7 86 94 2E 62 69 C3 80 71 C2 F4 F0 1A .u.....bi..q....
0020: 74 E5 5C 63 37 64 92 60 68 43 50 0F 49 FB A0 90 t.\c7d.`hCP.I...
0030: 71 1C EF 37 3F BF 38 E2 32 55 6C EB 63 C5 6A A1 q..7?.8.2Ul.c.j.
0040: 71 8B AF 76 0A 49 C6 0A 7C 32 0A 7F 87 9B F3 C5 q..v.I...2......
0050: 5B 1F 98 9C EC 8D 2C 28 E2 DA 83 98 6D 36 6B 7B [.....,(....m6k.
0060: DE E7 E6 26 4A AC E9 3F 84 96 4E CB B6 EC C5 13 ...&J..?..N.....
0070: 5D 99 45 A0 CB 4B AB BA 08 B7 DF 51 7D CB B7 1F ].E..K.....Q....
main, SEND TLSv1 ALERT: fatal, description = certificate_unknown
main, WRITE: TLSv1 Alert, length = 2
[Raw write]: length = 7
0000: 15 03 01 00 02 02 2E .......
main, called closeSocket()
main, handling exception: javax.net.ssl.SSLHandshakeException: java.security.cert.CertificateException: No name matching ipv4.tunnelbroker.net found
javax.net.ssl.SSLHandshakeException: java.security.cert.CertificateException: No name matching ipv4.tunnelbroker.net found
     at sun.security.ssl.Alerts.getSSLException(Alerts.java:192)
     at sun.security.ssl.SSLSocketImpl.fatal(SSLSocketImpl.java:1665)
     at sun.security.ssl.Handshaker.fatalSE(Handshaker.java:258)
     at sun.security.ssl.Handshaker.fatalSE(Handshaker.java:252)
     at sun.security.ssl.ClientHandshaker.serverCertificate(ClientHandshaker.java:1165)
     at sun.security.ssl.ClientHandshaker.processMessage(ClientHandshaker.java:154)
     at sun.security.ssl.Handshaker.processLoop(Handshaker.java:610)
     at sun.security.ssl.Handshaker.process_record(Handshaker.java:546)
     at sun.security.ssl.SSLSocketImpl.readRecord(SSLSocketImpl.java:913)
     at sun.security.ssl.SSLSocketImpl.performInitialHandshake(SSLSocketImpl.java:1158)
     at sun.security.ssl.SSLSocketImpl.startHandshake(SSLSocketImpl.java:1185)
     at sun.security.ssl.SSLSocketImpl.startHandshake(SSLSocketImpl.java:1169)
     at sun.net.www.protocol.https.HttpsClient.afterConnect(HttpsClient.java:440)
     at sun.net.www.protocol.https.AbstractDelegateHttpsURLConnection.connect(AbstractDelegateHttpsURLConnection.java:185)
     at sun.net.www.protocol.https.HttpsURLConnectionImpl.connect(HttpsURLConnectionImpl.java:153)
     at TestSSL.main(TestSSL.java:33)
Caused by: java.security.cert.CertificateException: No name matching ipv4.tunnelbroker.net found
     at sun.security.util.HostnameChecker.matchDNS(HostnameChecker.java:225)
     at sun.security.util.HostnameChecker.match(HostnameChecker.java:94)
     at sun.security.ssl.X509TrustManagerImpl.checkIdentity(X509TrustManagerImpl.java:285)
     at sun.security.ssl.X509TrustManagerImpl.checkServerTrusted(X509TrustManagerImpl.java:271)
     at sun.security.ssl.ClientHandshaker.serverCertificate(ClientHandshaker.java:1144)
     ... 11 more
{quote}
So, now I'm trying to figure out how to get past this. Unless (and until) Tunnelbroker includes the alternative name in their certificate (or if it's included already, until I figure out how to get that alternative imported into my truststore), I'm never going to be able to update via java.
Have a great day:)
Patrick.

I can't find anything that will help me with windows 7 reinstallation

i have already completely uninstaled i tunes and reinstalled it and i still get the messege that i tunes was not properly installed what am i supposed to do. i really am getting tired of uninstalling and reinstalling this program and i would like to use my new i pod and put my own music on it. i bought it off of someone else and am having a hard time gettig rid of their name and music

i still get the messege that i tunes was not properly installed what am i supposed to do.
What's the precise text of that message, please? (There's a few different ones I can think of that you might be getting.)

External Hard drive help: use with mac and pc? how to backup everything etc

Hello! I need some help regarding a new external hard drive I got from OWC. It is a 500 gb firewire 400 + usb 2.0 7200 rpm hard drive. I am running it from firewire. The software suggests the first thing you do is make a clone of your macbooks internal hard drive, that way if it fails later you can use the external to back everything up. If I do this ...
1. do I have to make the drive "Bootable" ? I have software called Data Backup 3 by Pro soft I think. It came with my external.
2. Can I still back up other stuff like my audio recordings and record onto that drive to a seperate folder?
3. If I make a bootable copy will it try and boot from the drive everytime I turn it on or something?
My other question is... how can I use this drive with a pc? I have a pc as well and I heard that the only way it will work is to format it in ms-dos mode (fat32?)
If I write it to fat32 will it slow down my drive or make it worse? I heard that you should format external drives specifically for mac if you have a mac; so it will only work with macs...
(sorry this is going on and on; it's like a chain reaction of questions)
so If its formatted to mac drive format then can I do this with my current situation:
1. I have wireless internet, the router is on a pc downstairs
2. Can I send files over a network somehow from the pc to my mac
3. then store it on my external?
If so can someone point me in that direction with a link?
Thank you for reading, sorry for making this so long.

1. No, you don't have to make a bootable clone.
2. If you use the drive for a bootable backup, then you cannot use the drive for other types of storage unless you partition the drive and make more than one volume.
3. No, it will not try to boot the computer. You must designate the startup volume using Startup Disk preferences.
If you wish to use the drive on both a Mac and a PC, then either you make two partitions - one for Mac and the other for the PC or you must format the entire drive using FAT32 so the drive can be used for read//write by both operating systems. If you do this then you cannot use the drive for a bootable backup nor can you use it with Time Machine.
FAT32 is slower for read/write on the Mac than using Mac formatting.
Optimally, I would suggest you partition the drive into two volumes. One volume formatted for the Mac and the other formatted FAT32.
You can send files from a PC to a Mac and vice-versa using File Sharing. Select Mac Help from the Finder's Help menu and search for "file sharing" or "sharing" to find help articles. Also see,
Mac OS X 10.5 Help- Setting up a Mac computer to share files with Windows users
Mac OS X 10.5 Help- Setting up a Windows computer to share files with Mac users
Mac OS X 10.5 Help- Sharing with Windows computers

How to use airport time capsule on a dell portable pc with windows 7 taking in consideration that Time machine doesn't run with Windows ?

how to use airport time capsule on a dell portable pc with windows 7 taking in consideration that time machine doesn't run with Windows ?

TM does not work like that.
If you want files to use later.. do not use TM.
Or do not use TM to the same location. Plug a USB drive into the computer and use that as the target for the permanent backup.
Read some details of how TM works so you understand what it will do.
http://pondini.org/TM/Works.html
Use a clone or different software for a permanent backup.
http://pondini.org/TM/Clones.html
How to use TC
http://pondini.org/TM/Time_Capsule.html
This is helpful.. particularly Q3.
Why you don't want to use TM.
Q20 here. http://pondini.org/TM/FAQ.html

Help requested with Windows Portable Directories

Similar Messages

Maybe you are looking for