Help Required : Adding new Wagetype to IT 0402 Payroll Results
Dear Experts,
I am adding a new Wagetype to show in Payroll results. At the step of setting up payroll infotypes a workbench request is created. When I transport this request from my Development server to Quality server I get the following error
"Table CI_P0402 could not be activated"
Can anyone please guide me regarding this issue.
Regards,
Talha Aftab
For anyone else facing the same issue : You have to make sure the data elements part of CI_P0402, like ZZTELXXXXX are transported as well. They were not automatically part of my transport, which is why it worked fine on my DEV server, but couldn't be activated when I transported to QAS (The data elements are created for each new wagetype when they are added to 0402, and it is set up)
Regards,
Talha Aftab
Similar Messages
-
PCUI 4.0, Search Help Required for New field
Hi everyone
I am working in CRM 4.0 Sales Order application
We created a new field in CRM sales Order in Header level in SAP GUI through EEWB.
The search help for the new field is working fine in SAP GUI. We want to add the same field with F4 help functionaliity in PCUI as well.
The field has been added in structure CRMT_BSP_SLS_OD1_General. It also shows domain value for the field however Origin of input field ie empty
The field has been added in PCUI and is successfully showing data inputted in SAPGUI
However we need search help functionality for the field
i tried these two steps
1) i checked on domain value checkbox and changed the field from input to dropdown. However the dropdown is empty in PCUI. Whenever i check box domain values for some field then all the possible values in SPA GUI are displayed in PCUI, however this is not working here.
2) I put Value_table in F4 of the field
This is also throwing up empty values
Am i missing something in this case
Please let me know how to go about it
TIA
AsadHi Frederic
Thanks for your response
I am not sure what is meant by regenerating the field group in this case
I added the entries for my view in the field group and generated the layout of the field group (If this is what you mean)
The field is working fine. I am able to save values to the field and able to see values saved in GUI.
I haven't linked search help of the field in PCUI
I am not sure how to go about it.
I used the data element in the structure for the field.
The data element has Domain entry in <b>Entry Help/Check</b> of the structure
If i check the Domain Value checkbox in my field group then the domain values should be available in dropdown if the field is dropdown
However i am not able to see the possible values of the field (It is present in SAP GUI)
Does something else needs to be done in this case
TIA
Asad -
Help required in creating function module which reads payroll clusters.
Hi ,
We have a requirement where in we need to create a function module for reading a sequence of tables from payroll clusters. This function module does two functions:
1.Read the payroll results from one system.
2.write the payroll results to other system.
please do the needful as soon as possible.
Thanks in advance.
Regards,
Durga.hi
Refer to the below thread
Programming with Clusters for HR-Payroll
Regards
Sameer -
Help with adding new song to 2007 iPod shuffle
I have an iPod shuffle from 2007 and just recently went to add new songs to it. Itunes program keeps telling me I have to erase everything and reload w/ new playlist I've added?? Confused, don't remember it working like this last year when I added songs. Any help??
With the 1st and 2nd gen iPod shuffle, it can only be associated with one iTunes library at a time. That has always been the design. It is basically like a mobile playlist for iTunes the library. The 3rd and 4th gen shuffles work more like the "bigger" iPods that have a screen, which is different from the very simple 1st and 2nd gen.
If you previously used this shuffle with a different iTunes library, iTunes is asking if you want to associate the shuffle with the iTunes library you are now using.
Any help??
What do you want to do...? -
Help Required - Regarding New Implementation
Hello Experts,
Implementing a new SAP ... and got bit confused about the April 1 opening balances and March closure.
On 1st March 2014 we entered the following Opening Balances -
1. Open POs
2. Open Sales Orders
3. Stock Opening Balances
Then for the month of March we have been running SAP and the legacy system in parallel , making the following transactions –
1. Sales Order (Invoiced in March only)
2. Deliveries
3. All AR Invoices
4. All Purchase Orders
5. All GRNs
6. All AP Invoices
7. No Bank receipts or payments were created. End of the month both AR and AP invoices will be Open for bank receipts and payments respectively.
The main question is which transactions need to be created/ closed to have opening balances in SAP.
(In other words ...
What is required now to create the correct opening balances? Can we close the invoices, both sales and purchases, without creating receipts and payments, respectively?
How do we need to enter the customer and supplier opening balances when we have already created all the invoices for the month of march?)
Your help will be much appreciated...
Thank you.
Best RegardsHi, Venkat
I think that your Subject is not relevant to your problem
For Search Help problem please follow the test the following code.
PARAMETERS: ppernr LIKE pa0001-pernr.
DATA: i_return TYPE ddshretval OCCURS 0 WITH HEADER LINE,
c TYPE c VALUE 'S'.
* Search Help for Pernr
AT SELECTION-SCREEN ON VALUE-REQUEST FOR ppernr.
TYPES: BEGIN OF t_pernr,
pernr LIKE pa0001-pernr,
ename LIKE pa0001-ename,
END OF t_pernr.
DATA: it_pa0001 TYPE STANDARD TABLE OF t_pernr WITH HEADER LINE.
SELECT pernr ename from pa0001
INTO CORRESPONDING FIELDS OF TABLE it_pa0001
where pa0001~endda = '99991231' .
* WHERE zsdo~kunnr IN sokunnr.
DELETE it_pa0001 WHERE pernr = '00000000'.
SORT it_pa0001 BY pernr.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'PERNR'
dynpprog = sy-repid
dynpnr = sy-dynnr
dynprofield = 'PERNR'
value_org = c
TABLES
value_tab = it_pa0001
return_tab = i_return.
Pleae Reply if any Issue,
and If above is also not solution too, than Please Explain your Problem
Kind Regards,
Fasial
Edited by: Faisal Altaf on Jan 17, 2009 2:46 PM -
Help with adding new contacts to BB 8330 - Cellular South
Can someone help me, please? I'm new to Blackberry, but my boss has just gotten one. How can I add contacts (I have quite a few to get into this new phone) without having to manually enter them on the phone? I'd prefer to compile a list on my computer and export to the new phone. Anyone have any suggestions on how I can do this? I'd really appreciate ANY and all help!
Thanks in advance!Use Outlook, seamless.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
IP address constantly changes requiring adding new port to enable wireless printing
I have a HP Photosmart C7280 printer setup with wireless option. My home network uses a wireless Linksys router. My problem is that the IP address constantly changes, so when trying to print from the desktop in the other room, I have to go through many steps: go to the printer, view the network settings, go back to the desktop in the other room, and add a new port in the printer properties in order to enable printing. There is now quite a collection of different ports that appear in the list as this seems to happen everytime I need to print from that computer. I don't seem to have the same issue with the main desktop which is located near the printer even though it was setup with the same wireless option.
I am not an expert on networking, so I don't understand why the IP address constantly changes. My question is how to avoid this annoyance? Do I need to choose a different setup option? The computers on the home network do not all use the same operating system so I was trying to avoid the potential headache of trying to share the printer on the network.You can find the steps how to assign a manual ip address in the link:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02722089&cc=us&dlc=en&lc=en&jumpid=reg_R1002_US...
If this answer was helpful or clarified the issue click the star to offer me a kudo as thanks.
If my answer solved the problem please mark the topic as the accepted solution
Although I am an HP Employee, ALL of my posts express MY opinion, and not of HP, whatsoever. -
Adding new field in Billing due list in CRM
Hi
What are ways to add new fields to billing due list in CRM.
Can we use any badi
Is there any configuration of layout.
Any other way
Thanks in advance for your help
AmitHi,
Adding new field in CRM can be done by AET.
AET is able to add new field from Web UI.
Please this blog for more details: /people/tzanko.stefanov2/blog/2008/11/26/application-enhancement-tool-creating-and-reusing-custom-fields-with-crm-70-part-2-of-2
Regards,
Steve -
This Adobe muse site file requires a newer version of Adobe Muse. I want to comeback to old version Adobe muse i need help to open my file thanks
Hi,
You may need to design the site again in older version OR may be copy and paste in place from new to old except what is new in the latest version.
Hope that helps!
Kind Regards, -
I want to get iBook, Facebook and Skype to my iphone 4.2.1 through my iTune, but I coudn't because it is said that it requires a newer version of iOS. Please I need your help. Thanks
If your iPhone can't be updated to a higher iOS version then the only way to get them is if you downloaded versions of them which were compatible with iOS 4.2.1 and you still have copies of those versions somewhere e.g. on your computer or on a backup - only the current version of each app is available in the store, and as apps (and other content) are tied to the account that downloads them, you will need to have older copies that are linked to your id
-
This sign appeared in my account: "Your payment method was declined. Update your biiling info'. After adding new information about my others cards I see the same sign. Can't understand what the problem is and what should I do. Everything used to be good before.
Do anyone know what I supposed to do in that situation?
Really need help!
Thanks in advance.Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact -
Help required with Photoshop Elements 4.0 this has been installed on my new Toshiba laptop with windows 8.1 for some 18 months and operating well. Now it will not open, message pops up saying “attempt to access invalid address” then “application not responding” Suggestions how to access would be much appreciated. Tks. Stuart
What is the size of your hard disk? PSE 4 is a very old program and I suspect it is not able to access the entire hard disk on your machine. Just a thought here.
-
I recently had a data transfer from my older mac to my newer one. After the transfer I logged into my new account and opened up my GarageBand. It worked perfectly fine, however when I logged into my old account with all my older data that I just transferred over, I could not open my GarageBand files and there is an error that states "GarageBand error after data transfer that states "This song requires a newer version of GarageBand. Please update to the latest version of GarageBand before opening this song".If anyone could please help me with this issue, I'd greatly appreciate it. Thank You!
When you transferred your data from your old mac, you may have accidentally transferred an older GarageBand version and either overwritten your newer version, or your old account still has the old GarageBand icon in the Dock.
Search with SpotLight, if you have more than one Garageband version on your new Mac (type "GarageBand" into the SpotLight search field). Does it list more than one GarageBand version? Then delete the older GarageBand.app.
What GarageBand version have you been using at your old mac, and what is the version on your new mac? If it has been bought recently, it should have come with GarageBand '11.
Regards
Léonie -
I lost all my pictures! Please help:( I added all my photo to a new album from the camera roll and i delete the picture that already move to new album, at last all my picture was gone !:'( Please, anyway to recover back all my photo? please help :'( Apple Service Center or Branch can help?
Albums is a way or sorting photos. Photos aren't moved from the Camera roll. The Camera Roll consists of all the photos on the phone. If you delete from Camera Roll they are deleted everywhere but Photo Stream.
Are you using Photo Stream? Your photos, providing they wer recent should still be in Photo Stream. If you have Photo Stream set up on your computer they should all be there. -
Adding new albums to smart playlist PLEASE HELP
Having a little trouble adding new albums to smart playlist that already exist. Can this be done?
Having a little trouble adding new albums to smart
playlist that already exist. Can this be done?
I am trying to edit smart playlist but songs dont show up, they are in the library.
Maybe you are looking for
-
I am trying to backup my Itunes onto my external hard drive. I am at the step where I on Itunes, click on File ->Library ->Organize library. I am suppose to check mark both boxes there, the first being "Consolidate Files" & the second being "Reorgani
-
Select entries present in an internal table using a range of key values
Hi guys, I have an internal table tb_bseg. It contains the vendor code (lifnr), document number (belnr) and other fields. How can I select values so that it may follow my (lifnr) range values in the selection screen? SELECT belnr lifnr gsber mwskz hw
-
After updating my shockwave flash player to 11.5.502.110, the flash content on pages went white blank, i can still see the bounding box of the flash content, but they are all white blank. When i right click on the content, flash context menu is not s
-
Hi all Following is the code for Simple DynPage. But when I click on button I am getting Portal Runtime Error. Pls check it out .. <i>public class MyPage extends PageProcessorComponent { public DynPage getPage() { return new MyPageDynPage();
-
Nokia N95: how do I stop it going landscape? + Cra...
My Nokia N95 will somehow just flip to landscape view. I can't figure out how to get it back? Can someone let me know! Thanks. ALSO: when I am speaking to someone on the phone... the other persons sound is crackly. It's really getting on my nerves. D