Help required for Documents

Hi all,
Can anyone of you help me out by mailing me the CR200, CR300, CR700 and CR750 documents.
It would be really helpful for me since i am struggling with the concept.
Thanks in advance

Hello,
I close this Topic because we don't want to circulate copyright protected Documents here. For official ways to get to Documents have a look at the Topic Links to CRM Documentation.
Regards
Gregor Wolf
SDN CRM Forum Moderator

Similar Messages

Help required for unicode compatibilty

Dear All,
We are in a process of analyzing the impact of unicode compatibility for our environment.
Following is our scenario:
- ECC6.0 is non unicode systsem
- Need to buid unicode CRM 7, SCM 7, PI 7.1 and BI7
- Need to integrate the above systems to non unicode ECC system.
Our questions are :
1. Is there any performance consideration when using communication between an Unicode and non-Unicode system?
Is Unicode - Unicode faster than Unicode - non-Unicode communication performance wise?
2. Do we face any technical or functinal problems while trying to integrate
unicode BI/ NW Java Stack to non unicode systems.
3. Do we need to review our sizing estimations due to unicode implemenation?
5. what will be the storage consumption increase for unicode systems compared to non unicode?
It would be greatly helpful for me if you can clarify these doubts.
Thanks and Regards

Hi,
1. I think no one has really measured this. I expect a slightly higher requirement for Unicode <--> Non-Unicode interfaces.
2. Please have a look at SAP Notes 838402, 73606, 975768 and 1358929 for restrictions in Non-Unicode systems. SAP highly recommends to go for Unicode in the whole landscape.
3. and 5. If you use the SAP quicksizer (http://service.sap.com/quicksizing), then Unicode is integrated.
" Please note that the Quick Sizer results include Unicode requirements. For more
information on additional requirements caused by Unicode, see
http://service.sap.com/unicode -> Unicode Media Library -> Unicode information on
specific topics: SAP Business Suite Unicode Hardware Requirements"
Best regards,
Nils Buerckel
SAP AG

Object Key required for document in Script

Hi All,
I require Object Key for Document to compair with Nast-vstat. Requirement is check vstat value. How will i get object key in SAP Script.
Regards
Divekar Mahadev

Objectkey(objky) you can get from NAST table. It is basically the document number.
Regards,
Mallick

PCUI 4.0, Search Help Required for New field

Hi everyone
I am working in CRM 4.0 Sales Order application
We created a new field in CRM sales Order in Header level in SAP GUI through EEWB.
The search help for the new field is working fine in SAP GUI. We want to add the same field with F4 help functionaliity in PCUI as well.
The field has been added in structure CRMT_BSP_SLS_OD1_General. It also shows domain value for the field however Origin of input field ie empty
The field has been added in PCUI and is successfully showing data inputted in SAPGUI
However we need search help functionality for the field
i tried these two steps
1) i checked on domain value checkbox and changed the field from input to dropdown. However the dropdown is empty in PCUI. Whenever i check box domain values for some field then all the possible values in SPA GUI are displayed in PCUI, however this is not working here.
2) I put Value_table in F4 of the field
This is also throwing up empty values
Am i missing something in this case
Please let me know how to go about it
TIA
Asad

Hi Frederic
Thanks for your response
I am not sure what is meant by regenerating the field group in this case
I added the entries for my view in the field group and generated the layout of the field group (If this is what you mean)
The field is working fine. I am able to save values to the field and able to see values saved in GUI.
I haven't linked search help of the field in PCUI
I am not sure how to go about it.
I used the data element in the structure for the field.
The data element has Domain entry in <b>Entry Help/Check</b> of the structure
If i check the Domain Value checkbox in my field group then the domain values should be available in dropdown if the field is dropdown
However i am not able to see the possible values of the field (It is present in SAP GUI)
Does something else needs to be done in this case
TIA
Asad

Seeburger help required for 810 and Dispatch Advice (IDOC type DESADV).

Hi All,
1. Please let me know blogs which clearly shows settings for Seeburger components for 850 (Purchase Order) to IDOC Scenario
--- Seeburger Workbench
--- Seeburger Mapping Designer (BIC)
--- Seeburger Counter and Varaibles
--- Seeburger AS2 Spoke
--- Any other Seeburger Component setting required
I have understand blog for 850 -- /people/rajeshkumar.pasupula/blog/2009/08/05/wanna-implement-seeburger-for-edi-find-the-booster
2. Anybody has blog for 810 or Dispatch Advice (IDOC type DESADV).
3. Can anybody provide me Mapping Logic (at field level) done in XI/PI for 850, 810 , Dispatch Advice (IDOC type DESADV) .
Regards

Hi Rickkk,
1. Please let me know blogs which clearly shows settings for Seeburger components for 850 (Purchase Order) to IDOC Scenario
--- Seeburger Workbench
--- Seeburger Mapping Designer (BIC)
--- Seeburger Counter and Varaibles
--- Seeburger AS2 Spoke
--- Any other Seeburger Component setting required
For SEEBURGER workbench please go through this blog and navigate the enbebbed links furthur to know about Seeburger workbench too.
/people/prateek.srivastava3/blog/2009/08/01/seeburger--part-1--the-basics
2
2. Anybody has blog for 810 or Dispatch Advice (IDOC type DESADV).
For 810 i think the procedure would be the same but themseeburger mapping program that validates the ANSX 810 would be different.As far as 997is concerned 997 is a functional acknowledgement.Its a genric format that is used to send acknowledgement for any EDI transaction set that has been sent.
3. Can anybody provide me Mapping Logic (at field level) done in XI/PI for 850, 810 , Dispatch Advice (IDOC type DESADV) .
The logic will be based on the trading partner guidelines which will contain the description of all the semantic and syntactiic description about the segments ,its feilds.we need to consider the guidelines and target side specifications too while mapping.
Thanks,
Ram.

Help Required for Adobe Forms.....

Hello All,
I have a very unique requirement as such we have a form and in the "TO" string field where we specify the email address of the receivers, now we want to send address memo to multiple users, however in our search window we can search only one name at a time & need to open search window every time for every new user to be included in the address field. We need to have AJAX type of functionality such as AJAX does asynchronous calls to the back-end and get help values dynamically even when the user is entering help values.
In my case if I start typing S in the manager filed, an event should get triggered and return back the names of all managers who start with the letter S,
If we go to Google.com and start typing, as you type,e Google gets help values and displays them below the input field. This is based on making asynchronous calls to the back-end.
We want to send interactive adobe forms to the multiple users for their approval or information. while entering email ids of multiple users, we need to have functionality as described above.
I'll appreciate if anyone can help with some clear steps, document link or working code sample etc.
Regards,
Moderator message: sorry wrong forum, please have a look in the forum for "Adobe Interactive Forms".
Edited by: Thomas Zloch on May 25, 2011 10:49 AM

Dear Sunitha,
Thanks for your reply.
Can you please specify how to create a virtual table and Associated dataset in Adobe Forms.
Our scenario is to create a Sales Order in SAP via Adobe Forms through Offline.
Please find the below image.
Data for Company Code and Plant is available in 2 Internal Table.
Please assist in the following
How to combine these 2 Internal tables inside Adobe Forms.
Filter the values of Plant based on Company Code.

Help required for Page Customization test

Hello all,
Could anyone assist with a test on Page Customizations? I am interested in testing a specific Page Customization on Version 7 (any SP) or Version 9 (pre SP5).
Test case:
1. Create a Page Customization on MasterAgreement (or any other business document with Document Links) as follows:
2. Check effect in Master Agreement (requirement is to check if Add/Delete buttons have been disabled by the PageCust)
I think that this type of Page Customization was working in either 7 or 9 but we don't have any instance to check.
Any help would be highly appreciated.
Regards,
Bogdan

Hello Bogdan,
I tried to reproduce it in a 7.0 system and I still see the Add button enabled on the Doc Links collection. I believe this was the behavior all along. My understanding is that this is on product management backlog for consideration for a future release.
Regards,
Vikram

Help required for improving performance of the Query

Hello SAP Techies,
I have MRP Query which shows Inventory projection by Calendar Year/Month wise.
There are 2 variables Plant and Material in free charateristics where it has been restricted by replacement of Query result .
Another query is Control M Query which is based on multiprovider. Multiprovider is created on 5 cubes.
The Query is taking 20 -15 Mins to get the result.
Due to replacement path by query result for the 2 variables first the control M Query is excuted. Business wanted to see all those materials in MRP query which are allocated to base plant hence they designed the query to use replacement Path by Query result. So it will get all the materials and plants from the control M query and will find the Invetory projection for the same selection in MRP query.
Is there any way I can improve the performance of the Query.
Query performance has been discussed innumerable times in the forums and there is a lot of information on the blogs and the WIKI - please search the forums before posting and if the existing posts do no answer your question satisfactorily then please raise a new post - else almost all the answers you get will be rehashed versions of previous posts ( and in most cases without attribution to the original author )
Edited by: Arun Varadarajan on Apr 19, 2011 9:23 PM

Hi ,
Please see if you can make these changes currently to the report . It will help in improving the performance of the query
1. Select the right read mode.
    Reading data during navigation minimizes the impact on
     the application server resources because only data that
    the user requires will be retrieved.
2. Leverage filters as much as possible. Using filters contributes to
   reducing the number of database reads and the size of the result set,
    hereby significantly improving query runtimes.
   Filters are especially valuable when associated with u201Cbig
    dimensionsu201D where there is a large number of characteristics such as
    customers and document numbers.
3. Reduce RKFs in the query to as few as possible. Also, define
calculated & RKFs on the Infoprovider level instead of locally within the query.
Regards
Garima

Help! Urgent help required for adjusting image

Hi - hoping someone can help.
I sent the attached PDF - http://www.sensecreative.co.uk/custUploads/SENSE-36-7977-95928/77317/SENSE-36-7977-95928-7 7317-2440.zip - to print with Sense Creative. The cards were printed and they've turned out quite visibly green on the reverse (where it should be white).
I've printed the artwork on several printers I have access to and it looks as it should, however SC are saying that the issue is with the artwork
"The green tinge you see on the reverse of these cards is prevalent in the artwork. The makeup of the background is approximately c-15 m-11 y-15 k-0. the predominant levels of the yellow and cyan will give you the green tint. Upping the levels of the artwork in or substituting the cyan, magenta and yellow levels with more black in Photoshop will likely give you the result you require. We are satisfied that in both instances, the artwork has printed correctly and the colours are well within tolerance given the nature of the artwork."
So, I'm in a bit of a pickle as the cards are needed for an event next week.
How do I change the image levels? Or are they talking nonsense and trying to pass the buck?
Help!

station_two,
Acrobat View> Tools> Print Production> Output Preview: Object Inspector will call out the objects' profiles if you click on each one individually (in this case all appeaar to be "Device CMYK" or Untagged CMYK)
untagged CMYK has the same pitfalls as untagged RGB... if one applys or assumes the wrong SOURCE PROFILE it doesn't CONVERT colors to Monitor RGB or Print Space correctly

Urgent help required for update Plz help!!

Hi i am updating my E51 and its displaying updating software please wait estimated time left 15 minutes for the past 1 hour.
Please tell me what should i do....
Its really urgent pls help....

Hi,
There might be a problem with either the NSU or the phone itself. Any updates on what happened?
Next time make sure you meet the certain system requirements before proceeding with the update.
Message Edited by nj15 on 01-Oct-2008 01:44 PM

Urgent Help Required for Connect Four Game

Hi all,
I am a student and I have a project due 20th of this month, I mean May 20, 2007 after 8 days. The project is about creating a Connect Four Game. I have found some code examples on the internet which helped me little bit. But there are lot of problems I am facing developing the whole game. I have drawn the Board and the two players can play. The players numbers can fill the board, but I have problem implementing the winner for the game. I need to implement the hasWon() method for Horizontal win, Vertical win and Diagonal win. I also found some code examples on the net but I was unable to make it working. I have 5 classes and one interface which I m implementing. The main problem is how to implement the hasWon() method in the PlayGame class below with Horizontal, vertical and diagonal moves.
Sorry there is so much code.
This the interface I must implement, but now I am only implementing the int move() of this interface. I will implement the rest later after solving the winner problem with your help.
Interface code..............
interface Player {
void init (Boolean color);
String name ();
int move ();
void inform (int i);
Player1 class......................
import java.util.*;
import java.io.*;
import javax.swing.*;
public class Player1 implements Player
public Player1()
public int move()
Scanner scan = new Scanner(System.in);
// BufferedReader stdin = new BufferedReader (new InputStreamReader(System.in));
int player1;
System.out.println ("What is your Number, player 1?");
player1 = scan.nextInt();
System.out.println ("Hey number"+player1+" are you prepared to CONNECT FOUR");
System.out.println();
return player1;
//Player.move();
//return player1;
}//end move method
public void init (Boolean color)
public void inform (int i)
public String name()
return "Koonda";
}//end player1 class
Player2 class...........................
import java.util.*;
import java.io.*;
import javax.swing.*;
public class Player2 implements Player
public int move()
//int cup0,cup1,cup2,cup3,cup4,cup5,cup6;
// cup0=5;cup1=5;cup2=5;cup3=5;cup4=5;cup5=5;cup6=5;
//int num1, num2;
Scanner scan = new Scanner(System.in);
// BufferedReader stdin = new BufferedReader (new InputStreamReader(System.in));
int player2;
System.out.println ("What is your Number, player 2?");
player2 = scan.nextInt();
System.out.println ("Hey "+player2+" are you prepared to CONNECT FOUR");
System.out.println();
//return player1;
return player2;
}//end move method
public void init (Boolean color)
public void inform (int i)
public String name()
return "malook";
}//end player1 class
PlayGame class which contains all the functionality.........................................................
import java.util.*;
import java.io.*;
import javax.swing.*;
public class PlayGame
//Player player1;
//Player player2;
int [][]ConnectFourArray;
boolean status;
int winner;
     int player1;
     int player2;
     public PlayGame()
          //this.player1 = player1;
          //this.player2 = player2;
     public void StartGame()
     try{
     // int X = 0, Y = 0;
     //int value;
     int cup0,cup1,cup2,cup3,cup4,cup5,cup6;
cup0=5;cup1=5;cup2=5;cup3=5;cup4=5;cup5=5;cup6=5;
     int[][] ConnectFourArray = new int[6][7];
     int num1, num2;
     for(int limit=21;limit!=0;limit--)
BufferedReader selecter = new BufferedReader (new InputStreamReader(System.in));
String column1;
System.out.println();
for ( int row=0; row < ConnectFourArray.length; row++ ){
System.out.print("Row " + row + ": ");
for ( int col=0; col < ConnectFourArray[row].length; col++ )
System.out.print( ConnectFourArray[row][col] + " ");
System.out.println();
System.out.println();
System.out.println ("Please Select a column of 0 through 6 ");
column1 = selecter.readLine();
num1= Integer.parseInt(column1);
System.out.println();
if (num1==0){
ConnectFourArray[cup0][0]=1;
cup0=cup0-1;
else if (num1==1){
ConnectFourArray[cup1][1]=1;
cup1=cup1-1;
else if (num1==2){
ConnectFourArray[cup2][2]=1;
cup2=cup2-1;
else if (num1==3){
ConnectFourArray[cup3][3]=1;
cup3=cup3-1;
else if (num1==4){
ConnectFourArray[cup4][4]=1;
cup4=cup4-1;
else if (num1==5){
ConnectFourArray[cup5][5]=1;
cup5=cup5-1;
else if (num1==6){
ConnectFourArray[cup6][6]=1;
cup6=cup6-1;
System.out.println();
BufferedReader selecter2 = new BufferedReader (new InputStreamReader(System.in));
String column2;
System.out.println();
for ( int row=0; row < ConnectFourArray.length; row++ ){
System.out.print("Row " + row + ": ");
for ( int col=0; col < ConnectFourArray[row].length; col++ )
System.out.print( ConnectFourArray[row][col] + " ");
System.out.println();
System.out.println();
System.out.println ("Please Select a column of 0 through 6 ");
column1 = selecter.readLine();
num1= Integer.parseInt(column1);
System.out.println();
if (num1==0){
ConnectFourArray[cup0][0]=2;
cup0=cup0-1;
else if (num1==1){
ConnectFourArray[cup1][1]=2;
cup1=cup1-1;
else if (num1==2){
ConnectFourArray[cup2][2]=2;
cup2=cup2-1;
else if (num1==3){
ConnectFourArray[cup3][3]=2;
cup3=cup3-1;
else if (num1==4){
ConnectFourArray[cup4][4]=2;
cup4=cup4-1;
else if (num1==5){
ConnectFourArray[cup5][5]=2;
cup5=cup5-1;
else if (num1==6){
ConnectFourArray[cup6][6]=2;
cup6=cup6-1;
System.out.println();
System.out.println();
catch (Exception E){
System.out.println("Error with input");
System.out.println("Would you like to play again");
try{
String value;
BufferedReader reader = new BufferedReader (new InputStreamReader(System.in));
// Scanner scan = new Scanner(System.in);
System.out.println("Enter yes to play or no to quit");
// value = scan.nextLine();
// String value2;
value = reader.readLine();
//value2 = reader.readLine();
if (value.equals("yes"))
System.out.println("Start again");
StartGame(); // calling the StartGame method to play a game once more
else if (value.equals("no"))
System.out.println("No more games to play");
// System.exit(0);
else
System.exit(0);
System.out.println();
catch (Exception e){
System.out.println("Error with input");
finally
System.out.println(" playing done");
//StartGame();
//check for horizontal win
public int hasWon()
int status = 0;
for (int row=0; row<6; row++)
for (int col=0; col<4; col++)
if (ConnectFourArray[col][row] != 0 &&
ConnectFourArray[col][row] == ConnectFourArray[col+1][row] &&
ConnectFourArray[col][row] == ConnectFourArray[col+2][row] &&
ConnectFourArray[col][row] == ConnectFourArray[col+3][row])
//status = true;//int winner;
if(status == player1)
System.out.println("Player 1 is the winner");
else if(status == player2)
System.out.println("Player 2 is the winner" );
}//end inner for loop
}// end outer for loop
} // end method Winner
return status;
}//end class
ClassConnectFour which designs the board........................
import java.util.*;
import java.io.*;
import javax.swing.*;
public class ClassConnectFour
     //Player player1;
     //Player player2;
     public ClassConnectFour()
          //this.player1 = player1;
public void DrawBoard()
int[][] ConnectFourArray = new int[6][7] ;
for ( int row=0; row < ConnectFourArray.length; row++ ){
System.out.print("Row " + row + ": ");
for ( int col=0; col < ConnectFourArray[row].length; col++ )
System.out.print( ConnectFourArray[row][col] + " ");
System.out.println();
System.out.println();
}//end class
TestConnetFour class which uses most of the above class..................
import java.util.*;
import java.io.*;
import javax.swing.*;
public class TestConnectFour
public static void main(String[] args)
ClassConnectFour cf = new ClassConnectFour();
cf.DrawBoard();
Player1 player1 = new Player1();
Player2 player2 = new Player2();
player1.move();
player2.move();
System.out.println("Number 1 belongs to player " + player1.name());
System.out.println("Number 2 belongs to player " + player2.name());
PlayGame pg = new PlayGame();
pg.StartGame();
pg.hasWon();
//pg.Play();
//System.out.println(player.name());
//System.out.println(player2.name());
}// end main
}//end class
I am sorry for all this junk code but I only understand it this way. Your urgent help is required. Looking forward to your reply.
Thanks in advance.
Koonda
//

Hi,
Thanks for your help but I really don't understand the table lookup algorithm. Could you please send me some code to implement that.
I will send you the formatted code as well
Thanks for your help.
looking forward to your reply.
Koonda
Hi all,
I am a student and I have a project due 20th of this month, I mean May 20, 2007 after 8 days. The project is about creating a Connect Four Game. I have found some code examples on the internet which helped me little bit. But there are lot of problems I am facing developing the whole game. I have drawn the Board and the two players can play. The players numbers can fill the board, but I have problem implementing the winner for the game. I need to implement the hasWon() method for Horizontal win, Vertical win and Diagonal win. I also found some code examples on the net but I was unable to make it working. I have 5 classes and one interface which I m implementing. The main problem is how to implement the hasWon() method in the PlayGame class below with Horizontal, vertical and diagonal moves.
Sorry there is so much code.
This the interface I must implement, but now I am only implementing the int move() of this interface. I will implement the rest later after solving the winner problem with your help.
Interface code..............
interface Player {
void init (Boolean color);
String name ();
int move ();
void inform (int i);
Player1 class......................
import java.util.*;
import java.io.*;
import javax.swing.*;
public class Player1 implements Player
public Player1()
public int move()
Scanner scan = new Scanner(System.in);
// BufferedReader stdin = new BufferedReader (new InputStreamReader(System.in));
int player1;
System.out.println ("What is your Number, player 1?");
player1 = scan.nextInt();
System.out.println ("Hey number"+player1+" are you prepared to CONNECT FOUR");
System.out.println();
return player1;
//Player.move();
//return player1;
}//end move method
public void init (Boolean color)
public void inform (int i)
public String name()
return "Koonda";
}//end player1 class
Player2 class...........................
import java.util.*;
import java.io.*;
import javax.swing.*;
public class Player2 implements Player
public int move()
//int cup0,cup1,cup2,cup3,cup4,cup5,cup6;
// cup0=5;cup1=5;cup2=5;cup3=5;cup4=5;cup5=5;cup6=5;
//int num1, num2;
Scanner scan = new Scanner(System.in);
// BufferedReader stdin = new BufferedReader (new InputStreamReader(System.in));
int player2;
System.out.println ("What is your Number, player 2?");
player2 = scan.nextInt();
System.out.println ("Hey "+player2+" are you prepared to CONNECT FOUR");
System.out.println();
//return player1;
return player2;
}//end move method
public void init (Boolean color)
public void inform (int i)
public String name()
return "malook";
}//end player1 class
PlayGame class which contains all the functionality.........................................................
import java.util.*;
import java.io.*;
import javax.swing.*;
public class PlayGame
//Player player1;
//Player player2;
int [][]ConnectFourArray;
boolean status;
int winner;
int player1;
int player2;
public PlayGame()
//this.player1 = player1;
//this.player2 = player2;
public void StartGame()
try{
// int X = 0, Y = 0;
//int value;
int cup0,cup1,cup2,cup3,cup4,cup5,cup6;
cup0=5;cup1=5;cup2=5;cup3=5;cup4=5;cup5=5;cup6=5;
int[][] ConnectFourArray = new int[6][7];
int num1, num2;
for(int limit=21;limit!=0;limit--)
BufferedReader selecter = new BufferedReader (new InputStreamReader(System.in));
String column1;
System.out.println();
for ( int row=0; row < ConnectFourArray.length; row++ ){
System.out.print("Row " + row + ": ");
for ( int col=0; col < ConnectFourArray[row].length; col++ )
System.out.print( ConnectFourArray[row][col] + " ");
System.out.println();
System.out.println();
System.out.println ("Please Select a column of 0 through 6 ");
column1 = selecter.readLine();
num1= Integer.parseInt(column1);
System.out.println();
if (num1==0){
ConnectFourArray[cup0][0]=1;
cup0=cup0-1;
else if (num1==1){
ConnectFourArray[cup1][1]=1;
cup1=cup1-1;
else if (num1==2){
ConnectFourArray[cup2][2]=1;
cup2=cup2-1;
else if (num1==3){
ConnectFourArray[cup3][3]=1;
cup3=cup3-1;
else if (num1==4){
ConnectFourArray[cup4][4]=1;
cup4=cup4-1;
else if (num1==5){
ConnectFourArray[cup5][5]=1;
cup5=cup5-1;
else if (num1==6){
ConnectFourArray[cup6][6]=1;
cup6=cup6-1;
System.out.println();
BufferedReader selecter2 = new BufferedReader (new InputStreamReader(System.in));
String column2;
System.out.println();
for ( int row=0; row < ConnectFourArray.length; row++ ){
System.out.print("Row " + row + ": ");
for ( int col=0; col < ConnectFourArray[row].length; col++ )
System.out.print( ConnectFourArray[row][col] + " ");
System.out.println();
System.out.println();
System.out.println ("Please Select a column of 0 through 6 ");
column1 = selecter.readLine();
num1= Integer.parseInt(column1);
System.out.println();
if (num1==0){
ConnectFourArray[cup0][0]=2;
cup0=cup0-1;
else if (num1==1){
ConnectFourArray[cup1][1]=2;
cup1=cup1-1;
else if (num1==2){
ConnectFourArray[cup2][2]=2;
cup2=cup2-1;
else if (num1==3){
ConnectFourArray[cup3][3]=2;
cup3=cup3-1;
else if (num1==4){
ConnectFourArray[cup4][4]=2;
cup4=cup4-1;
else if (num1==5){
ConnectFourArray[cup5][5]=2;
cup5=cup5-1;
else if (num1==6){
ConnectFourArray[cup6][6]=2;
cup6=cup6-1;
System.out.println();
System.out.println();
catch (Exception E){
System.out.println("Error with input");
System.out.println("Would you like to play again");
try{
String value;
BufferedReader reader = new BufferedReader (new InputStreamReader(System.in));
// Scanner scan = new Scanner(System.in);
System.out.println("Enter yes to play or no to quit");
// value = scan.nextLine();
// String value2;
value = reader.readLine();
//value2 = reader.readLine();
if (value.equals("yes"))
System.out.println("Start again");
StartGame(); // calling the StartGame method to play a game once more
else if (value.equals("no"))
System.out.println("No more games to play");
// System.exit(0);
else
System.exit(0);
System.out.println();
catch (Exception e){
System.out.println("Error with input");
finally
System.out.println(" playing done");
//StartGame();
//check for horizontal win
public int hasWon()
int status = 0;
for (int row=0; row<6; row++)
for (int col=0; col<4; col++)
if (ConnectFourArray[col][row] != 0 &&
ConnectFourArray[col][row] == ConnectFourArray[col+1][row] &&
ConnectFourArray[col][row] == ConnectFourArray[col+2][row] &&
ConnectFourArray[col][row] == ConnectFourArray[col+3][row])
//status = true;//int winner;
if(status == player1)
System.out.println("Player 1 is the winner");
else if(status == player2)
System.out.println("Player 2 is the winner" );
}//end inner for loop
}// end outer for loop
} // end method Winner
return status;
}//end class
ClassConnectFour which designs the board........................
import java.util.*;
import java.io.*;
import javax.swing.*;
public class ClassConnectFour
//Player player1;
//Player player2;
public ClassConnectFour()
//this.player1 = player1;
public void DrawBoard()
int[][] ConnectFourArray = new int[6][7] ;
for ( int row=0; row < ConnectFourArray.length; row++ ){
System.out.print("Row " + row + ": ");
for ( int col=0; col < ConnectFourArray[row].length; col++ )
System.out.print( ConnectFourArray[row][col] + " ");
System.out.println();
System.out.println();
}//end class
TestConnetFour class which uses most of the above class..................
import java.util.*;
import java.io.*;
import javax.swing.*;
public class TestConnectFour
public static void main(String[] args)
ClassConnectFour cf = new ClassConnectFour();
cf.DrawBoard();
Player1 player1 = new Player1();
Player2 player2 = new Player2();
player1.move();
player2.move();
System.out.println("Number 1 belongs to player " + player1.name());
System.out.println("Number 2 belongs to player " + player2.name());
PlayGame pg = new PlayGame();
pg.StartGame();
pg.hasWon();
//pg.Play();
//System.out.println(player.name());
//System.out.println(player2.name());
}// end main
}//end classI am sorry for all this junk code but I only understand it this way. Your urgent help is required. Looking forward to your reply.
Thanks in advance.
Koonda

Help required for Payment Term change report in SAP BI

Dear Experts ,
I have got a client requirement to develop a report to present all the purchase orders for which there has been a change in Payment Term. Could any one provide his input as which extractor can give me this information or where can I get this data to capture changes in Payment Term in ECC.
Any suggestions welcome !
Regards
Anurag Krishna Dev

HI,
Purchase relavant information will be getting from
2LIS_02_ITM     - item level information
2LIS_02_HDR   - Header level information
2LIS_02_SCL   - schedule level information
find the below link hope it will help you get more idea...
http://help.sap.com/saphelp_sm32/helpdata/en/1d/f4383fdb800804e10000000a114084/frameset.htm
Regards
BVR

Help required for SSO

Hi,
I am looking for a single sign-on solution for Tomcat platform. This solution should work on Active Directory-Internet Explorer 6-Tomcat 5 combo.
The requirement is - When a user requests a certain page from his browser, the web server must be able to identify the (active directory domain name/domain user name) from his request.
I tried a product by appliedcrypto.com, which works on Kerberos/SPNEGO, but it doesn't seem to be working.
I am running on a very tight schedule, please help me out.
Thanx and Regards
Vibhor

Have you checked out the Oracle Single Sign On Application Developer's Guide that comes with the Portal Services documentation? Here's a link to it on OTN.
http://technet.oracle.com/docs/products/ias/doc_library/ias102/portal.102/a86782/toc.htm
You may find it helpful.

Help required for FI Extraction

Hi All,
Currently i am working in FI Extraction (0FI_GL_4). In ECC, Document Posting is done using the TCODE FB01. After posting the document, i have checked table BKPF and BSEG and found data is available. But i have checked in delta Queue (RSA7). But data is not available.
I have already done INIT load and delta queue is created in RSA7.Can u pls help me why the data is not available in RSA7.
I have checked the table BWOM2_TIMEST and found some enteries over there.
DataSrce___Currnt Date__Time______Update Mode Time (GMT)___Time _______Last time stap int___Time_Zone_diff 0FI_AP_4_____19.08.2009__10:41:51____S__315.162.000.000__________6.194.681.990.000_______X__________________19800
0FI_AR_4_____19.08.2009__11:41:09____F_____0__________________________0______________0__________________0
0FI_GL_4_____18.08.2009__15:23:36____F_____0__________________________0______________0__________________0
0FI_GL_4_____19.08.2009__10:17:56____S__315.162.000.000__________6.194.681.990.000_______X__________________19800
I have already run delta for 0FI_GL_4. But in this table, the Update Mode is showing "S" instead of "D". Do i need to do settings for this.
Can u pls help on this issue.
Thanks,
Jelina.

Dear Diogo,
Thanks a lot for ur replies.. Now i can able to get data in BW.
Before extracting the data into BW, I have checked in RSA7 -> Display Queue. There is no entry displayed. But executing the delta load Info Package, i am getting data in BW.
Can u pls help how the data flows into BW.
I have checked for 0FI_AP_4 and 0FI_AR_4 data sources.After the document posting, immediately the entries are available in RSA7.
But for 0FI_GL_4 datasource, i dont find any entry in RSA7.
Pls help on this ..
Thanks,
Jelina.

Help Required for DBConect

Dear All,
I wish to connect one Non SAP system with SAP system. Database for Sap BW is SQL 2005 service pack 1. Where as database of NON SAP system is SQL 2000. Can anyone guide. I am trying to create but not able to do.
I have certain queries
A) Do i need to install any DB client on SAP BW ?
B) What value shall i add in connections info tab while creating source system using DB connect. I am trying to add ip address but it is not accepting the same ?
In case you have any specific document for SQL please help?
Regards
Baljit Singh

Hi,
In BOM, there is onr item category "R", variable size item is there. Using this you can achieve this. By exploring the Variable size item you can get some idea.
Regards,
V. Suresh

Help required for Documents

Similar Messages

Maybe you are looking for