Help required for mapping

Hi experts,
i require to populate the target node based on conditions from the input fields...
I need to check for 5 values for a field and if yes then only target node needs to be created..
Ex: input: master
oouput: group
group node needs to be populated only if master is equal to 100,200,300,400..if not no node...
how to achive this....
Thanks in advance.

Hi reddy,
We have an option called "fix values" in mapping under conversion functions,
map the source field to the fix values , in fix values enter the key as 100,500..... and all the corresponding values as Y,
Then in mapping you can make a single condition "IF without Else" and check the output of the FIX values for Y, IF output is equal to Y then pass the sorce field.
this is for simplifying your logic by using single condition in mapping.
Contact me at [email protected] for a screenshot of this mapping
Thanks
Saravanan.N
Message was edited by:
saravanan

Similar Messages

Help Required for Mapping Key figures from Cube to APO Planning area.

Hello Experts,
We have created cube in APO BW and now we want to map it to Planning area how we can map.
Can any body explain how we can map keyfigures?
What is the use of livechache how it will be updated?
Regards
Ram

Hi,
I am not very sure about the 9ARE aggregate (haven't used it in backups), but RTSCUBE is used to copy time Series (TS) KF data from cube to planning area (SNP or DP).
Are you trying to restore some time series data from your backup cube to the planning area? If yes, then do a mapping of characteristic from cube to planning area in RTSCUBE, and also map the TS KF between cube and planning area.
If your KF is not a time series KF, then you can't copy it from cube to planning area. You could get data to cube for some reporting, otherwise I am not sure what use the backup is for you. For SNP, most of the data would be received from R/3, so there's not much point in having a backup.
Hope this helps.
Thanks - Pawan

Help required for unicode compatibilty

Dear All,
We are in a process of analyzing the impact of unicode compatibility for our environment.
Following is our scenario:
- ECC6.0 is non unicode systsem
- Need to buid unicode CRM 7, SCM 7, PI 7.1 and BI7
- Need to integrate the above systems to non unicode ECC system.
Our questions are :
1. Is there any performance consideration when using communication between an Unicode and non-Unicode system?
Is Unicode - Unicode faster than Unicode - non-Unicode communication performance wise?
2. Do we face any technical or functinal problems while trying to integrate
unicode BI/ NW Java Stack to non unicode systems.
3. Do we need to review our sizing estimations due to unicode implemenation?
5. what will be the storage consumption increase for unicode systems compared to non unicode?
It would be greatly helpful for me if you can clarify these doubts.
Thanks and Regards

Hi,
1. I think no one has really measured this. I expect a slightly higher requirement for Unicode <--> Non-Unicode interfaces.
2. Please have a look at SAP Notes 838402, 73606, 975768 and 1358929 for restrictions in Non-Unicode systems. SAP highly recommends to go for Unicode in the whole landscape.
3. and 5. If you use the SAP quicksizer (http://service.sap.com/quicksizing), then Unicode is integrated.
" Please note that the Quick Sizer results include Unicode requirements. For more
information on additional requirements caused by Unicode, see
http://service.sap.com/unicode -> Unicode Media Library -> Unicode information on
specific topics: SAP Business Suite Unicode Hardware Requirements"
Best regards,
Nils Buerckel
SAP AG

Seeburger help required for 810 and Dispatch Advice (IDOC type DESADV).

Hi All,
1. Please let me know blogs which clearly shows settings for Seeburger components for 850 (Purchase Order) to IDOC Scenario
--- Seeburger Workbench
--- Seeburger Mapping Designer (BIC)
--- Seeburger Counter and Varaibles
--- Seeburger AS2 Spoke
--- Any other Seeburger Component setting required
I have understand blog for 850 -- /people/rajeshkumar.pasupula/blog/2009/08/05/wanna-implement-seeburger-for-edi-find-the-booster
2. Anybody has blog for 810 or Dispatch Advice (IDOC type DESADV).
3. Can anybody provide me Mapping Logic (at field level) done in XI/PI for 850, 810 , Dispatch Advice (IDOC type DESADV) .
Regards

Hi Rickkk,
1. Please let me know blogs which clearly shows settings for Seeburger components for 850 (Purchase Order) to IDOC Scenario
--- Seeburger Workbench
--- Seeburger Mapping Designer (BIC)
--- Seeburger Counter and Varaibles
--- Seeburger AS2 Spoke
--- Any other Seeburger Component setting required
For SEEBURGER workbench please go through this blog and navigate the enbebbed links furthur to know about Seeburger workbench too.
/people/prateek.srivastava3/blog/2009/08/01/seeburger--part-1--the-basics
2
2. Anybody has blog for 810 or Dispatch Advice (IDOC type DESADV).
For 810 i think the procedure would be the same but themseeburger mapping program that validates the ANSX 810 would be different.As far as 997is concerned 997 is a functional acknowledgement.Its a genric format that is used to send acknowledgement for any EDI transaction set that has been sent.
3. Can anybody provide me Mapping Logic (at field level) done in XI/PI for 850, 810 , Dispatch Advice (IDOC type DESADV) .
The logic will be based on the trading partner guidelines which will contain the description of all the semantic and syntactiic description about the segments ,its feilds.we need to consider the guidelines and target side specifications too while mapping.
Thanks,
Ram.

PCUI 4.0, Search Help Required for New field

Hi everyone
I am working in CRM 4.0 Sales Order application
We created a new field in CRM sales Order in Header level in SAP GUI through EEWB.
The search help for the new field is working fine in SAP GUI. We want to add the same field with F4 help functionaliity in PCUI as well.
The field has been added in structure CRMT_BSP_SLS_OD1_General. It also shows domain value for the field however Origin of input field ie empty
The field has been added in PCUI and is successfully showing data inputted in SAPGUI
However we need search help functionality for the field
i tried these two steps
1) i checked on domain value checkbox and changed the field from input to dropdown. However the dropdown is empty in PCUI. Whenever i check box domain values for some field then all the possible values in SPA GUI are displayed in PCUI, however this is not working here.
2) I put Value_table in F4 of the field
This is also throwing up empty values
Am i missing something in this case
Please let me know how to go about it
TIA
Asad

Hi Frederic
Thanks for your response
I am not sure what is meant by regenerating the field group in this case
I added the entries for my view in the field group and generated the layout of the field group (If this is what you mean)
The field is working fine. I am able to save values to the field and able to see values saved in GUI.
I haven't linked search help of the field in PCUI
I am not sure how to go about it.
I used the data element in the structure for the field.
The data element has Domain entry in Entry Help/Check of the structure
If i check the Domain Value checkbox in my field group then the domain values should be available in dropdown if the field is dropdown
However i am not able to see the possible values of the field (It is present in SAP GUI)
Does something else needs to be done in this case
TIA
Asad

Help Required for XSLT mapping

Hi Folks,
I am working on a scenario, where we had 17 different one to one mapping with same source strcture but different target structures. Source is a Idoc common for everyone.
Sample Target Structure :
Message Type(XYZ)
 RECORDS(0,u)
 A(0,1)
 B(0,1)
 C(0,1)
 D(0,1)
As per our requirement we need the output in which we need to have "GLOBE " at the top and the value of A, B, C and D on single row for each ouurance of RECORD. For 2nd occurance we need to change the line and 2 nd set of ABCD on 2nd row and so on. e.g.
GLOBE
0002044452KNA1 0000027079 0001E
0002044452KNA1 0000027080 0001E
0002044452KNA1 0000027080 0001E
To acheive the above output we are using a XSLT map after Message Mapping
<?xml version="1.0" encoding="UTF-8" ?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:output method="text" indent="no" encoding="UTF-8" omit-xml-declaration="yes"/>
<xsl:preserve-space elements="*"/>
<xsl:template match="/">GLOBE<xsl:text>
</xsl:text>
<xsl:for-each select="//RECORDS">
<xsl:for-each select="*">
 <xsl:value-of select="current()"/>
</xsl:for-each><xsl:text>
</xsl:text></xsl:for-each>
</xsl:template>
</xsl:stylesheet>
NOW WE HAVE changed the 17 one to one maps to one multi mapping (1:17) as our source is same.
Now as the output of this multi mapping is getting into XSL code, it is not able to parse it.
How can we do the changes in this particular code So that we can Achieve: 17 different file out of single multi mapping and XSL map like it was comming previously from 17 different maps.
Thanks
Pradeep

Hi Pradeep,
Depending on how you setup your multi mapping, when you execute you will end up with something like this as the xml output:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
<ns0:Message1>
 <XYZ></XYZ>
 <XYZ></XYZ>
</ns0:Message1>
</ns0:Messages>
Or this:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
<ns0:Message1>
 <XYZ></XYZ>
</ns0:Message1>
<ns0:Message2>
 <XYZ></XYZ>
</ns0:Message2>
</ns0:Messages>
The single xml message with the u201CMessagesu201D wrapper is not split into separate messages until it hits one of the adapters in the adapter engine. Perhaps you can try to adjust the xslt to expect this as input, but the output would still need to be <ns0:Messages>. That might be what is causing the failure with your current xslt. Can the flat file conversion in the file adapter?
Thanks,
-Russ

Mapping Help required for ORDER Idoc to EDI file

Hi
My source strcture is as follows
E1EDP01
E1EDP01
   E1EDPT1 (TDID=0001)
     E1EDPT2
         TDLINE = abcd
   E1EDPT1 (TDID=0001)
     E1EDPT2
         TDLINE = XYZ
and my target line item is mapped with TDLINE(Context E1EDP01)-exist then createif LineItem(This is working fine but item filed is failing)
The logic to populate itemFIELD1 is if E1EDT1(TDID==0001) then pass TDLINE to ItemFIELD1, how to map this
(Sometimes E1EDPT2 populate multiple times for one E1EDPT1)

>and my target line item is mapped with TDLINE(Context E1EDP01)-exist then createif LineItem(This is working fine but item filed is failing)
Why don't you create the LineItems only when TDID = 0001 because this will ensure to populate item fields with correct value.
The mapping logic to produce the LineItems should be like this..
IF (TDID = 0001) THEN (TDLINE set context to E1EDPT1)---RemoveContext---LineItem.
>The logic to populate itemFIELD1 is if E1EDT1(TDID==0001) then pass TDLINE to ItemFIELD1, how to map this
In this mapping make sure the context of TDLINE is set to E1EDPT1 and then use RemoveContext ---SplitByValue to the output of "IF" function. e.g.
IF (TDID = 0001) THEN (TDLINE set context to E1EDPT1)---RemoveContext---SplitByValue---FIELD1.

Help required in mapping Materials , Quotation and Sales order

Hi,
We need your help for the following requirement
There is a vehicle model and colours for these models
Company gets sales plan from dealers for vehicle model and later dealer confrms the PO Qty with model and required colour.
I need to map this in SAP.
I am proposing to create a Quotation for the sales plan from dealers with vehicle model and when company recieves PO , they will create Sales order with reference to Quotation.
The challenge i need to get all the colours ( finished materials ) for that model, currenttly all models and finished materials are managed in product heirarchy.
When i create order with reference to quotation..........the dealer should able to get the list of colours ( materials ) in the system for that model ( i am planning to create material masters for these models as well)....Please help me how to map this in SAP SD
i am just guessing if higher level item category concept can help .......or please suggest feasible solution
When he creates sales order with reference to quotation, instead of model ( mateial ) from the qtn ..........dealer should get the list of end prodcuts ( colours ) for the model in the sales order so that he chooses the required colour and saves SO.
Actually this is a portal driven project and SO creation is also integrated inthe portal for the dealers.
Regards
Venkata Rama Reddy

Hi there,
You said that the sales order process is done through the portal through the dealers? We are currently looking at a similar requirement from a customer perspective to create an online store sort of feel integrating the S/D module.
Can you share any ideas, things you did for portal integration? Web Dyn Pro application, Visual Composer, gave portal access to the dealers to S/D transactions?
Thanks for any input you can give!
Jonathan

Help Required COMPLEX MAPPING !!!!! POINTS WILL BE GIVEN !!

Hii I am doing a file sender config and my message is something like this
C1TN4028260000PP345700210 2620582 005 0000000000000072020061802 000000000000000000
C2TN402826000000001037331742557076 0000071641086338975600000110230000394007
C3TN4028260000000010000071641086338975600097BP 0005 00000000030000000000
here the C1, C2, C3 are unbounded it is explained below
This is only a part of the Payload............
my Datatype format is
OCCURANCES
<Data_DT>
<Record> 1
<Header> 0..1
There are many fields....
</Header>
<Control_1> 0...unbounded, this is the C1 record
There are many fields....
</Control_1>
<Control_2> 0...unbounded, this is the C2 record
There are many fields....
</Control_2>
<Control_3> 0...unbounded, this is the C3 record
There are many fields....
</Control_3>
<Line> 0..1
There are many fields....
</Line>
</Record>
Only write E1EDL37 segment if subsequent "C3" record contains C3_Data(This is one of the fields in Segment Control_3) > 0. If C2_Num = C3_Num, then only one E1EDL37 segment needs to be written for this "C2" record. If C2_NUM <> C3_NUM, then one E1EDL37 segment has to be written for the C2 record and one has to be written for the C3_NUM for the C3 record. In this case one E1EDL44 segment must be written with each unique C2_NUM.
This is a standard Idoc,
Part of the structure,
E1EDL37 unbounded
E1EDL44 unbounded, its in item level of E1EDL37

Hai,
Only write E1EDL37 segment if subsequent "C3" record contains C3_Data(This is one of the fields in Segment Control_3) > 0.
In message mapping choose arithematic options like if-else and compare ur data record with the condition and do mapping accordingly.
If C2_Num = C3_Num, then only one E1EDL37 segment needs to be written for this "C2" record.
Take if-else operator in Graphical mapping and compare both C2_NUM and C3_NUM and if true map C2_Num to E1EDL37.
 If C2_NUM <> C3_NUM, then one E1EDL37 segment has to be written for the C2 record and one has to be written for the C3_NUM for the C3 record. In this case one E1EDL44 segment must be written with each unique C2_NUM.
check for condition C2_NUM <> C3_NUM using if-else operator and if true map corresponding C2 record to E1EDL37 and if false map corresponding C3_NUM to required segment.
To write E1EDL44 segment for unique C2_NUM....check the flds of C2 record with each other for uniqueness and map the corresponding unique C2_NUM to each E1EDL44.
I hope this will help u to get through ur mapping.
Cheers,
Prasanthi.

Help! Urgent help required for adjusting image

Hi - hoping someone can help.
I sent the attached PDF - http://www.sensecreative.co.uk/custUploads/SENSE-36-7977-95928/77317/SENSE-36-7977-95928-7 7317-2440.zip - to print with Sense Creative. The cards were printed and they've turned out quite visibly green on the reverse (where it should be white).
I've printed the artwork on several printers I have access to and it looks as it should, however SC are saying that the issue is with the artwork
"The green tinge you see on the reverse of these cards is prevalent in the artwork. The makeup of the background is approximately c-15 m-11 y-15 k-0. the predominant levels of the yellow and cyan will give you the green tint. Upping the levels of the artwork in or substituting the cyan, magenta and yellow levels with more black in Photoshop will likely give you the result you require. We are satisfied that in both instances, the artwork has printed correctly and the colours are well within tolerance given the nature of the artwork."
So, I'm in a bit of a pickle as the cards are needed for an event next week.
How do I change the image levels? Or are they talking nonsense and trying to pass the buck?
Help!

station_two,
Acrobat View> Tools> Print Production> Output Preview: Object Inspector will call out the objects' profiles if you click on each one individually (in this case all appeaar to be "Device CMYK" or Untagged CMYK)
untagged CMYK has the same pitfalls as untagged RGB... if one applys or assumes the wrong SOURCE PROFILE it doesn't CONVERT colors to Monitor RGB or Print Space correctly

Urgent Help Required for Check Box in Table Column

Hi all,
Could any body help me to solve my problem?
First of all I have created a table whose one column is check box. The column of the tables are Name,Phone,ID,Address and a checkBox columns.In one view
the table will be found with data. I want to click on some of the rows(suppose there are 5 rows, but based on some condition I have selected the check box of 3 rows).
Next there will be a button(Supose SEND Button).
After selecting the check box I want to press that button and then a new window will come which will show two tables. one for selected rows(with the same columns name except check box) and another for Unchecked rows with the same column name(Name,Phone,ID,Address).
Could any body help me by sending the details and code?
Thanks and Regards.
Sudip

Hi Sudip,
1) create custom controller and appropriate context structure there (dataNode(Name,Phone,ID,Address,Check))
2) create view StartView. Map data node from custom controller to node in view. Create table and bind context node attributes to appropriate table columns.
3) create view ResultView. Map data node from custom controller to node in view. Create 2 nodes (CheckedData, UncheckedData) with supply methods. Create filtering implementation in supply methods (add checked and unchecked node elements to appropriate nodes).
4) create new window with resultView as default view
4) in startView in button action handler put something like
     IWDWindowInfo _windowInfo = wdComponentAPI.getComponentInfo().findInWindows("Popup");
     IWDWindowManager manager = wdComponentAPI.getWindowManager();
     IWDWindow _window = manager.createWindow(_windowInfo, true);
     _window.open();
So, just tried localy and it works.
Best regards, Maksim Rashchynski.

Urgent help required for update Plz help!!

Hi i am updating my E51 and its displaying updating software please wait estimated time left 15 minutes for the past 1 hour.
Please tell me what should i do....
Its really urgent pls help....

Hi,
There might be a problem with either the NSU or the phone itself. Any updates on what happened?
Next time make sure you meet the certain system requirements before proceeding with the update.
Message Edited by nj15 on 01-Oct-2008 01:44 PM

Urgent Help Required for Connect Four Game

Hi all,
I am a student and I have a project due 20th of this month, I mean May 20, 2007 after 8 days. The project is about creating a Connect Four Game. I have found some code examples on the internet which helped me little bit. But there are lot of problems I am facing developing the whole game. I have drawn the Board and the two players can play. The players numbers can fill the board, but I have problem implementing the winner for the game. I need to implement the hasWon() method for Horizontal win, Vertical win and Diagonal win. I also found some code examples on the net but I was unable to make it working. I have 5 classes and one interface which I m implementing. The main problem is how to implement the hasWon() method in the PlayGame class below with Horizontal, vertical and diagonal moves.
Sorry there is so much code.
This the interface I must implement, but now I am only implementing the int move() of this interface. I will implement the rest later after solving the winner problem with your help.
Interface code..............
interface Player {
void init (Boolean color);
String name ();
int move ();
void inform (int i);
Player1 class......................
import java.util.*;
import java.io.*;
import javax.swing.*;
public class Player1 implements Player
public Player1()
public int move()
Scanner scan = new Scanner(System.in);
// BufferedReader stdin = new BufferedReader (new InputStreamReader(System.in));
int player1;
System.out.println ("What is your Number, player 1?");
player1 = scan.nextInt();
System.out.println ("Hey number"+player1+" are you prepared to CONNECT FOUR");
System.out.println();
return player1;
//Player.move();
//return player1;
}//end move method
public void init (Boolean color)
public void inform (int i)
public String name()
return "Koonda";
}//end player1 class
Player2 class...........................
import java.util.*;
import java.io.*;
import javax.swing.*;
public class Player2 implements Player
public int move()
//int cup0,cup1,cup2,cup3,cup4,cup5,cup6;
// cup0=5;cup1=5;cup2=5;cup3=5;cup4=5;cup5=5;cup6=5;
//int num1, num2;
Scanner scan = new Scanner(System.in);
// BufferedReader stdin = new BufferedReader (new InputStreamReader(System.in));
int player2;
System.out.println ("What is your Number, player 2?");
player2 = scan.nextInt();
System.out.println ("Hey "+player2+" are you prepared to CONNECT FOUR");
System.out.println();
//return player1;
return player2;
}//end move method
public void init (Boolean color)
public void inform (int i)
public String name()
return "malook";
}//end player1 class
PlayGame class which contains all the functionality.........................................................
import java.util.*;
import java.io.*;
import javax.swing.*;
public class PlayGame
//Player player1;
//Player player2;
int [][]ConnectFourArray;
boolean status;
int winner;
 int player1;
 int player2;
 public PlayGame()
 //this.player1 = player1;
 //this.player2 = player2;
 public void StartGame()
 try{
 // int X = 0, Y = 0;
 //int value;
 int cup0,cup1,cup2,cup3,cup4,cup5,cup6;
cup0=5;cup1=5;cup2=5;cup3=5;cup4=5;cup5=5;cup6=5;
 int[][] ConnectFourArray = new int[6][7];
 int num1, num2;
 for(int limit=21;limit!=0;limit--)
BufferedReader selecter = new BufferedReader (new InputStreamReader(System.in));
String column1;
System.out.println();
for ( int row=0; row < ConnectFourArray.length; row++ ){
System.out.print("Row " + row + ": ");
for ( int col=0; col < ConnectFourArray[row].length; col++ )
System.out.print( ConnectFourArray[row][col] + " ");
System.out.println();
System.out.println();
System.out.println ("Please Select a column of 0 through 6 ");
column1 = selecter.readLine();
num1= Integer.parseInt(column1);
System.out.println();
if (num1==0){
ConnectFourArray[cup0][0]=1;
cup0=cup0-1;
else if (num1==1){
ConnectFourArray[cup1][1]=1;
cup1=cup1-1;
else if (num1==2){
ConnectFourArray[cup2][2]=1;
cup2=cup2-1;
else if (num1==3){
ConnectFourArray[cup3][3]=1;
cup3=cup3-1;
else if (num1==4){
ConnectFourArray[cup4][4]=1;
cup4=cup4-1;
else if (num1==5){
ConnectFourArray[cup5][5]=1;
cup5=cup5-1;
else if (num1==6){
ConnectFourArray[cup6][6]=1;
cup6=cup6-1;
System.out.println();
BufferedReader selecter2 = new BufferedReader (new InputStreamReader(System.in));
String column2;
System.out.println();
for ( int row=0; row < ConnectFourArray.length; row++ ){
System.out.print("Row " + row + ": ");
for ( int col=0; col < ConnectFourArray[row].length; col++ )
System.out.print( ConnectFourArray[row][col] + " ");
System.out.println();
System.out.println();
System.out.println ("Please Select a column of 0 through 6 ");
column1 = selecter.readLine();
num1= Integer.parseInt(column1);
System.out.println();
if (num1==0){
ConnectFourArray[cup0][0]=2;
cup0=cup0-1;
else if (num1==1){
ConnectFourArray[cup1][1]=2;
cup1=cup1-1;
else if (num1==2){
ConnectFourArray[cup2][2]=2;
cup2=cup2-1;
else if (num1==3){
ConnectFourArray[cup3][3]=2;
cup3=cup3-1;
else if (num1==4){
ConnectFourArray[cup4][4]=2;
cup4=cup4-1;
else if (num1==5){
ConnectFourArray[cup5][5]=2;
cup5=cup5-1;
else if (num1==6){
ConnectFourArray[cup6][6]=2;
cup6=cup6-1;
System.out.println();
System.out.println();
catch (Exception E){
System.out.println("Error with input");
System.out.println("Would you like to play again");
try{
String value;
BufferedReader reader = new BufferedReader (new InputStreamReader(System.in));
// Scanner scan = new Scanner(System.in);
System.out.println("Enter yes to play or no to quit");
// value = scan.nextLine();
// String value2;
value = reader.readLine();
//value2 = reader.readLine();
if (value.equals("yes"))
System.out.println("Start again");
StartGame(); // calling the StartGame method to play a game once more
else if (value.equals("no"))
System.out.println("No more games to play");
// System.exit(0);
else
System.exit(0);
System.out.println();
catch (Exception e){
System.out.println("Error with input");
finally
System.out.println(" playing done");
//StartGame();
//check for horizontal win
public int hasWon()
int status = 0;
for (int row=0; row<6; row++)
for (int col=0; col<4; col++)
if (ConnectFourArray[col][row] != 0 &&
ConnectFourArray[col][row] == ConnectFourArray[col+1][row] &&
ConnectFourArray[col][row] == ConnectFourArray[col+2][row] &&
ConnectFourArray[col][row] == ConnectFourArray[col+3][row])
//status = true;//int winner;
if(status == player1)
System.out.println("Player 1 is the winner");
else if(status == player2)
System.out.println("Player 2 is the winner" );
}//end inner for loop
}// end outer for loop
} // end method Winner
return status;
}//end class
ClassConnectFour which designs the board........................
import java.util.*;
import java.io.*;
import javax.swing.*;
public class ClassConnectFour
 //Player player1;
 //Player player2;
 public ClassConnectFour()
 //this.player1 = player1;
public void DrawBoard()
int[][] ConnectFourArray = new int[6][7] ;
for ( int row=0; row < ConnectFourArray.length; row++ ){
System.out.print("Row " + row + ": ");
for ( int col=0; col < ConnectFourArray[row].length; col++ )
System.out.print( ConnectFourArray[row][col] + " ");
System.out.println();
System.out.println();
}//end class
TestConnetFour class which uses most of the above class..................
import java.util.*;
import java.io.*;
import javax.swing.*;
public class TestConnectFour
public static void main(String[] args)
ClassConnectFour cf = new ClassConnectFour();
cf.DrawBoard();
Player1 player1 = new Player1();
Player2 player2 = new Player2();
player1.move();
player2.move();
System.out.println("Number 1 belongs to player " + player1.name());
System.out.println("Number 2 belongs to player " + player2.name());
PlayGame pg = new PlayGame();
pg.StartGame();
pg.hasWon();
//pg.Play();
//System.out.println(player.name());
//System.out.println(player2.name());
}// end main
}//end class
I am sorry for all this junk code but I only understand it this way. Your urgent help is required. Looking forward to your reply.
Thanks in advance.
Koonda
//

Hi,
Thanks for your help but I really don't understand the table lookup algorithm. Could you please send me some code to implement that.
I will send you the formatted code as well
Thanks for your help.
looking forward to your reply.
Koonda
Hi all,
I am a student and I have a project due 20th of this month, I mean May 20, 2007 after 8 days. The project is about creating a Connect Four Game. I have found some code examples on the internet which helped me little bit. But there are lot of problems I am facing developing the whole game. I have drawn the Board and the two players can play. The players numbers can fill the board, but I have problem implementing the winner for the game. I need to implement the hasWon() method for Horizontal win, Vertical win and Diagonal win. I also found some code examples on the net but I was unable to make it working. I have 5 classes and one interface which I m implementing. The main problem is how to implement the hasWon() method in the PlayGame class below with Horizontal, vertical and diagonal moves.
Sorry there is so much code.
This the interface I must implement, but now I am only implementing the int move() of this interface. I will implement the rest later after solving the winner problem with your help.
Interface code..............
interface Player {
void init (Boolean color);
String name ();
int move ();
void inform (int i);
Player1 class......................
import java.util.*;
import java.io.*;
import javax.swing.*;
public class Player1 implements Player
public Player1()
public int move()
Scanner scan = new Scanner(System.in);
// BufferedReader stdin = new BufferedReader (new InputStreamReader(System.in));
int player1;
System.out.println ("What is your Number, player 1?");
player1 = scan.nextInt();
System.out.println ("Hey number"+player1+" are you prepared to CONNECT FOUR");
System.out.println();
return player1;
//Player.move();
//return player1;
}//end move method
public void init (Boolean color)
public void inform (int i)
public String name()
return "Koonda";
}//end player1 class
Player2 class...........................
import java.util.*;
import java.io.*;
import javax.swing.*;
public class Player2 implements Player
public int move()
//int cup0,cup1,cup2,cup3,cup4,cup5,cup6;
// cup0=5;cup1=5;cup2=5;cup3=5;cup4=5;cup5=5;cup6=5;
//int num1, num2;
Scanner scan = new Scanner(System.in);
// BufferedReader stdin = new BufferedReader (new InputStreamReader(System.in));
int player2;
System.out.println ("What is your Number, player 2?");
player2 = scan.nextInt();
System.out.println ("Hey "+player2+" are you prepared to CONNECT FOUR");
System.out.println();
//return player1;
return player2;
}//end move method
public void init (Boolean color)
public void inform (int i)
public String name()
return "malook";
}//end player1 class
PlayGame class which contains all the functionality.........................................................
import java.util.*;
import java.io.*;
import javax.swing.*;
public class PlayGame
//Player player1;
//Player player2;
int [][]ConnectFourArray;
boolean status;
int winner;
int player1;
int player2;
public PlayGame()
//this.player1 = player1;
//this.player2 = player2;
public void StartGame()
try{
// int X = 0, Y = 0;
//int value;
int cup0,cup1,cup2,cup3,cup4,cup5,cup6;
cup0=5;cup1=5;cup2=5;cup3=5;cup4=5;cup5=5;cup6=5;
int[][] ConnectFourArray = new int[6][7];
int num1, num2;
for(int limit=21;limit!=0;limit--)
BufferedReader selecter = new BufferedReader (new InputStreamReader(System.in));
String column1;
System.out.println();
for ( int row=0; row < ConnectFourArray.length; row++ ){
System.out.print("Row " + row + ": ");
for ( int col=0; col < ConnectFourArray[row].length; col++ )
System.out.print( ConnectFourArray[row][col] + " ");
System.out.println();
System.out.println();
System.out.println ("Please Select a column of 0 through 6 ");
column1 = selecter.readLine();
num1= Integer.parseInt(column1);
System.out.println();
if (num1==0){
ConnectFourArray[cup0][0]=1;
cup0=cup0-1;
else if (num1==1){
ConnectFourArray[cup1][1]=1;
cup1=cup1-1;
else if (num1==2){
ConnectFourArray[cup2][2]=1;
cup2=cup2-1;
else if (num1==3){
ConnectFourArray[cup3][3]=1;
cup3=cup3-1;
else if (num1==4){
ConnectFourArray[cup4][4]=1;
cup4=cup4-1;
else if (num1==5){
ConnectFourArray[cup5][5]=1;
cup5=cup5-1;
else if (num1==6){
ConnectFourArray[cup6][6]=1;
cup6=cup6-1;
System.out.println();
BufferedReader selecter2 = new BufferedReader (new InputStreamReader(System.in));
String column2;
System.out.println();
for ( int row=0; row < ConnectFourArray.length; row++ ){
System.out.print("Row " + row + ": ");
for ( int col=0; col < ConnectFourArray[row].length; col++ )
System.out.print( ConnectFourArray[row][col] + " ");
System.out.println();
System.out.println();
System.out.println ("Please Select a column of 0 through 6 ");
column1 = selecter.readLine();
num1= Integer.parseInt(column1);
System.out.println();
if (num1==0){
ConnectFourArray[cup0][0]=2;
cup0=cup0-1;
else if (num1==1){
ConnectFourArray[cup1][1]=2;
cup1=cup1-1;
else if (num1==2){
ConnectFourArray[cup2][2]=2;
cup2=cup2-1;
else if (num1==3){
ConnectFourArray[cup3][3]=2;
cup3=cup3-1;
else if (num1==4){
ConnectFourArray[cup4][4]=2;
cup4=cup4-1;
else if (num1==5){
ConnectFourArray[cup5][5]=2;
cup5=cup5-1;
else if (num1==6){
ConnectFourArray[cup6][6]=2;
cup6=cup6-1;
System.out.println();
System.out.println();
catch (Exception E){
System.out.println("Error with input");
System.out.println("Would you like to play again");
try{
String value;
BufferedReader reader = new BufferedReader (new InputStreamReader(System.in));
// Scanner scan = new Scanner(System.in);
System.out.println("Enter yes to play or no to quit");
// value = scan.nextLine();
// String value2;
value = reader.readLine();
//value2 = reader.readLine();
if (value.equals("yes"))
System.out.println("Start again");
StartGame(); // calling the StartGame method to play a game once more
else if (value.equals("no"))
System.out.println("No more games to play");
// System.exit(0);
else
System.exit(0);
System.out.println();
catch (Exception e){
System.out.println("Error with input");
finally
System.out.println(" playing done");
//StartGame();
//check for horizontal win
public int hasWon()
int status = 0;
for (int row=0; row<6; row++)
for (int col=0; col<4; col++)
if (ConnectFourArray[col][row] != 0 &&
ConnectFourArray[col][row] == ConnectFourArray[col+1][row] &&
ConnectFourArray[col][row] == ConnectFourArray[col+2][row] &&
ConnectFourArray[col][row] == ConnectFourArray[col+3][row])
//status = true;//int winner;
if(status == player1)
System.out.println("Player 1 is the winner");
else if(status == player2)
System.out.println("Player 2 is the winner" );
}//end inner for loop
}// end outer for loop
} // end method Winner
return status;
}//end class
ClassConnectFour which designs the board........................
import java.util.*;
import java.io.*;
import javax.swing.*;
public class ClassConnectFour
//Player player1;
//Player player2;
public ClassConnectFour()
//this.player1 = player1;
public void DrawBoard()
int[][] ConnectFourArray = new int[6][7] ;
for ( int row=0; row < ConnectFourArray.length; row++ ){
System.out.print("Row " + row + ": ");
for ( int col=0; col < ConnectFourArray[row].length; col++ )
System.out.print( ConnectFourArray[row][col] + " ");
System.out.println();
System.out.println();
}//end class
TestConnetFour class which uses most of the above class..................
import java.util.*;
import java.io.*;
import javax.swing.*;
public class TestConnectFour
public static void main(String[] args)
ClassConnectFour cf = new ClassConnectFour();
cf.DrawBoard();
Player1 player1 = new Player1();
Player2 player2 = new Player2();
player1.move();
player2.move();
System.out.println("Number 1 belongs to player " + player1.name());
System.out.println("Number 2 belongs to player " + player2.name());
PlayGame pg = new PlayGame();
pg.StartGame();
pg.hasWon();
//pg.Play();
//System.out.println(player.name());
//System.out.println(player2.name());
}// end main
}//end classI am sorry for all this junk code but I only understand it this way. Your urgent help is required. Looking forward to your reply.
Thanks in advance.
Koonda

Help required for file to Multi file Blog

Hi,
I'm working with following blog for file to multi file scenario...
"/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
But in Configuration part, I'm unable to find ..TITLE_IDTYPE option for RB_SPLIT.. Screen, there is only two options are available one is Standard and another one is Extended ???!!!
Note : we are using SP16
So, How can I go ahead to complete this scenario ??!!!
Can anybody help me out to complete this file to mulfile scenario without BPM.
Thanks.,
Esha

Hi Esha,
the names seem to have changed since SP14 (the version of this blog entry).
I did a multi-mapping with SP15 once, using "Extended".
Kind regards,
Dennis

Help required in mapping MM pricing

PO should have conditions for
    freight
    Insurance
    bank charges
all paid to the vendor who is supplying goods.
These prices will have to be loaded on materials on GR.
2.
PO should not have any values against the conditions as mentioned above as he will not be paid for that.
When goods arrive, these charges are paid by local clearing agent or agents.
He will be paid accordingly based on the invoice he sends.
These costs also should be booked on material upon GR.
The local vendor or vendors does the clearing of goods at the port and for that he/they charge company and sends invoices.
Company wants to track these expenses per vendor and also wants different GL accounts for each type of conditions(heads of expenses these vendor/s charges in their invoice such as port charges, clearing charges,insurance charges,bank charges,freight where original supplier do not charge for these costs to the company)
Importantly,all these costs also have to be loaded on material .How this will be done ?
Consider also the case where you raised the PO with only conditions such as insurance and bank charges included in the PO and rest of the charges as mentioned above are borned by local vendor for clearing goods.
Now when I do the goods receipt the value will only get updated by the quantity*rate basis in mat master.
How can we load the values incurred for clearing the goods at the time of GR then ?
example: PO qty:100 @rate 10/ea
GR: Stock with MAP updated say as 10(no invoice yet from original supplier and also from the local clearing vendor)
Now these goods are transferred to other plant vide say STO or plant to plant transfer.
This material will also get updated with MAP as 10.
Now after couple of days the local vendor invoice comes and he is paid actually for the charges he claimed and also comes in the invoice of original goods supplier.
When these invoices will be posted how these costs will be added to the material ?
Can any one please suggest the best possible solution ASAP as am left with no time here.
Regards,
Manoj

Hi,
Your requirement is very common across all manufacturing comapanies.
1)Create seperate condition types for freight, insurance and bank charges with condition category as "B - Delivery costs"
2) flag the "accruals" check box.
3) Select the appropriate value for "Vendor in GR" field as per your requirement.
4) Insert these condition types in the calculation schema as per the requirement
5) Assign an accrual key. If the amount to be posted to different accounts, use different accrual keys.
6) maintain the "Actual Value" ( a sort of total of all conditon types used in the schema) in the schema such that it includes the values of above condtion types. Check value "S" is assigned in the "sub totals" field for "Actual Value" (if you are following standard JRM000, just insert your condition types before the "actual value" level)
Now your schema is ready. Since the values of freight, insurance and bank charges are included in "actual value", always the material will be loaded with this value at the time of GR.
Usually vendor code will be defaulted in the vendor field of the above condtion types. You can change the same at the time of PO creation by selecting the condition type and clicking on details icon.
You can post the vendor invoice for base value and taxes using the variant
"goods/service items" and post the other charges to different vendor account using "planned delivery costs" variant. if there are any differences between the planned value in the PO and actual invoice receipt, those are automatically adjusted.
If you require any further clarifications plz revert back
regards,
Mallik

Help required for mapping

Similar Messages

Maybe you are looking for