Help required for PremiereCs6 export settings
Hi all,
Problem: I'm now on holiday, I have to export a video but on my laptop I can install only CS4 (I downloaded the trial). I need to export the video with the setting (available on premiere cs6) h264, 1080p pal for ipad2.
This preset is not present in cs4, can someone please provide me all the export parameter I should set on Cs4 to achieve the same result (bitrate, profile, etc...)?
thanks verymuch
Can the trial export H.264?
Progressive, high, 4.0, VBR2, 5, 6, Key frame distance 90 (for ntsc, 75 for pal 72 for 23,976)
Audio AAC, 48000, bitrate 160
Multiplexer: mp4, ipod.
Similar Messages
-
Hai!
I have been searching for good export settings to use as I export my mpg files in adobe premier cs4
But all my results are so crapy!
I can see they are good in premiere, but after export they are as bad as if I would use windows movie maker.
I found that AVI uncompressed only gives out the sound, no images.
Avi compressed gives that bad look.
QT animation gives also bad look.
Mp4 got a max resolution of 340 x 240, so we not even gona discust that one..
My movies are in native MOD files. I convert em by simply changing the extension to mpg
720x576 resolution
25 fps
48k Hz compressed audio
Any more info needed?
Thanks alot for helping me, I really looked at many threads and stuff
over internet to find a solution but i couldn't.
This is really urgent, the movie MUST be done within 2 days. Or else i get an F>My movies are in native MOD files. I convert em by simply changing the extension to mpg
You are starting with compressed files... and then you compress again... that is a DOUBLE hit on quality
You might try some other software (no, I don't know which one) to edit your files and export without re-compressing -
Help! Best SD export settings for web CS4
Hello and thank you in advance for your help. I'm a newbie here and have read through many posts on exporting and found some good information here for creating a master http://forums.adobe.com/message/3005601. But, I am searching for export settings to send a 3:30 min. video to a client to upload to a website and you tube that is high resolution but not too huge of a file. I am looking for setting others have used to create this.
This is a SD tutorial video with a combination of .psd and .jpeg stills and graphics in After Effects compositions mixed in video footage. There are a lot of cross-dissolve transitions and I am getting pixelization with the settings below. It is a start, but I hope to get a smoother video for the web at 320x240 and 720x480. Any suggestions on aspect ratio, file format and settings would be appreciated. The original video is 720x480.
Format: H.264
NTSC, 720x480, 29.97 [fps], Progressive
AAC, 128 [kbps], 44.1khz, Stereo, Frequencey
Field Order: lower
Pixel aspect ratio: square pixels
Profile: high
Level: 3.1
VBR, 2 Pass, Target 6.00, Max 8.00 [mbps]
Widescreen 16:9
Thank you!! I need to get this project out today, so any help is very appreciated!You could go that way, looks very nice.
I tried it but still not able to get it in my website.
Taking the save route is by Premiere. -
Please help with highest quality export settings...
I have searched the forum and web for hours (no joke!) and I am still trying to figure out what are the best video settings to give me the highest HD quality video in daylight. I am using a Canon HF200 and the latest updated version of FCE. My problem is that I am unable to produce an HD quality video at 1920 x 1080 Full HD without being "jagged". I have two questions; what do you suggest to be the best FCE import and export settings to produce the best HD video, and what settings do you have your HF200 set to (for normal daylight conditions), to produce the best HD video file? The file will be played directly thru my computer to a plasma HDTV.
I have tried several settings, but using anything above 1280x720 16:9, makes the video "jagged". Again, I don't care about the size of the file or how long it takes, I just want the best. Is there something I am missing?
My FCP settings are the following:
I log and transfer the video from the camera into FCP (on a black MacBook; 2.16 GHz with 4 GB RAM) using the AVCHD Apple Intermediate Codec 1920 x 1080i source. I then export the video using the following:
Export using "Quicktime Conversion".
Quicktime options video settings are:
Frame Rate set to "Current"
Key Frames set to every "24" frames
Compressor quality: "best" (Encoding set to "best quality")
Data Rate set to "automatic"
Quicktime options video size are:
"HD 1280 x 720 16:9" (anything higher produces the jags!)
Deinterlace source video is NOT checked
My Canon HF 200 settings are the following:
- P mode
- FXP (17 Mbps)
- 60i framerate
all others are set to the normal default
I have read some reports saying the above is good and others suggesting changing FXP to MXP (24 Mbps) and/or the framerate from 60i to PF30. I don't care about the size of the file, I just want the highest quality HD file.
Any suggestions for the best FCE settings and/or HF200 settings would be very much appreciated!
Thanks for your help,
EvanThanks again for the feedback
Let me try my best to answer the above (I'm new at all this and I appreciate you guys taking the time to try and help me out).
First off, I tried rendering and that did not help.
Here is my sequence. I am not going into FCE from the camera directly. I have archived the video file from the camera using iMovie (as well as just making an exact copy of the camera files; they both appear to me to be the exact same, both can be logged and transferred into FCE, and both files give me a jagged FCE result).
Once I log and transfer the file(s), I then take the clip and add it to a sequence file (rendering or not rendering the clip(s) at this point does not make a difference), and then click/highlight the sequence file in the browser and export it.
As for "editing the video in a 1920x1080i60 sequence", I think I am. I am not doing any editing to the clip. It is logged and transferred using the AVCHD Apple Intermediate Codec 1920 x 1080i and then exported using either as a Quicktime Movie or Quicktime Conversion (set for 1920 x 1080 using H.264 compression; both ways still result in a jagged video).
That's about it...log and transfer, add clip to sequence, and then export sequence...
I hope this answers the above, but if not, I apologize; I'm still learning!
Also, if I use iMovie, with similar export (share) settings, I get a non-jagged video (I have tried with deinterlacing and not deinterlacing, and both video results are fine)
Thanks again,
Evan -
Help required with (soundcard) connection / settings, thanks in advan
Help required with connection / settings between a Creative Sound Blaster Audigy Platinum EX (soundcard) and a Creative DTT3500 Digital (5. speakers).
The problem
No sound from any of the speakers. (Exception can plug in headphones at front)
Background
My computer has been recently upgraded at my local computer shop and all programs re-installed (including driver update from Creative's website). However after reconnecting speakers and restoring the original settings I?m getting no sound from any of the speakers. I?ve followed all the available advice/instructions I can find on this website and manuals to no avail.
Set-up
Physical
(Digital DIN) Speakers/decoder amplifier (DTT3500) connected to the (digital out) soundcard (Audigy Platinum EX) using minijack to DIN cable. (As per instruction manual)
Software
Creative Audio Consul ? setting as per instructions, however have tried variations in vain. (Note: above tabs there is a select device box with SB Audigy [A0000] in it ? only option. Just wondering what [A0000] means?)
Your advice please. A simple step by step guide would be appreciated, many thanks in advance, Jon"My computer has been recently upgraded at my local computer shop and all programs re-installed (including driver update from Creative's website). "
Do you have the original installation disk?
If so, try installing THOSE drivers, ESPECIALLY if it worked before. Be sure to uninstall what is there now, first.
Its natural for most people to want the 'latest' drivers for their hardware. However:
After experiencing some difficulties with some CL 'updates' for certain products, I now avoid them UNLESS I am having a PROBLEM with the existing drivers. -
Help required for unicode compatibilty
Dear All,
We are in a process of analyzing the impact of unicode compatibility for our environment.
Following is our scenario:
- ECC6.0 is non unicode systsem
- Need to buid unicode CRM 7, SCM 7, PI 7.1 and BI7
- Need to integrate the above systems to non unicode ECC system.
Our questions are :
1. Is there any performance consideration when using communication between an Unicode and non-Unicode system?
Is Unicode - Unicode faster than Unicode - non-Unicode communication performance wise?
2. Do we face any technical or functinal problems while trying to integrate
unicode BI/ NW Java Stack to non unicode systems.
3. Do we need to review our sizing estimations due to unicode implemenation?
5. what will be the storage consumption increase for unicode systems compared to non unicode?
It would be greatly helpful for me if you can clarify these doubts.
Thanks and RegardsHi,
1. I think no one has really measured this. I expect a slightly higher requirement for Unicode <--> Non-Unicode interfaces.
2. Please have a look at SAP Notes 838402, 73606, 975768 and 1358929 for restrictions in Non-Unicode systems. SAP highly recommends to go for Unicode in the whole landscape.
3. and 5. If you use the SAP quicksizer (http://service.sap.com/quicksizing), then Unicode is integrated.
" Please note that the Quick Sizer results include Unicode requirements. For more
information on additional requirements caused by Unicode, see
http://service.sap.com/unicode -> Unicode Media Library -> Unicode information on
specific topics: SAP Business Suite Unicode Hardware Requirements"
Best regards,
Nils Buerckel
SAP AG -
Seeburger help required for 810 and Dispatch Advice (IDOC type DESADV).
Hi All,
1. Please let me know blogs which clearly shows settings for Seeburger components for 850 (Purchase Order) to IDOC Scenario
--- Seeburger Workbench
--- Seeburger Mapping Designer (BIC)
--- Seeburger Counter and Varaibles
--- Seeburger AS2 Spoke
--- Any other Seeburger Component setting required
I have understand blog for 850 -- /people/rajeshkumar.pasupula/blog/2009/08/05/wanna-implement-seeburger-for-edi-find-the-booster
2. Anybody has blog for 810 or Dispatch Advice (IDOC type DESADV).
3. Can anybody provide me Mapping Logic (at field level) done in XI/PI for 850, 810 , Dispatch Advice (IDOC type DESADV) .
RegardsHi Rickkk,
1. Please let me know blogs which clearly shows settings for Seeburger components for 850 (Purchase Order) to IDOC Scenario
--- Seeburger Workbench
--- Seeburger Mapping Designer (BIC)
--- Seeburger Counter and Varaibles
--- Seeburger AS2 Spoke
--- Any other Seeburger Component setting required
For SEEBURGER workbench please go through this blog and navigate the enbebbed links furthur to know about Seeburger workbench too.
/people/prateek.srivastava3/blog/2009/08/01/seeburger--part-1--the-basics
2
2. Anybody has blog for 810 or Dispatch Advice (IDOC type DESADV).
For 810 i think the procedure would be the same but themseeburger mapping program that validates the ANSX 810 would be different.As far as 997is concerned 997 is a functional acknowledgement.Its a genric format that is used to send acknowledgement for any EDI transaction set that has been sent.
3. Can anybody provide me Mapping Logic (at field level) done in XI/PI for 850, 810 , Dispatch Advice (IDOC type DESADV) .
The logic will be based on the trading partner guidelines which will contain the description of all the semantic and syntactiic description about the segments ,its feilds.we need to consider the guidelines and target side specifications too while mapping.
Thanks,
Ram. -
Help with sequence and export settings
hi
need to edit some clips made with camtasia using the tech smith codec
first i convert clips to dvd using stoki converter
then when i start prem cs4 i not sure which settings to use in the "new sequence" window under the editing mode drop down
also not sure of the settings at export settings under the format drop down
need to maintain the best quality
thanksFor the answer to "what Sequence Preset?" you will want to match your Imported footage 100%, even if that means choosing the Desktop Preset, and then customizing all aspects of it, to match.
For the Export, start with "how do I intend to deliver this material?" That will give you the basic settings, and then you can tweak those to suit. How do you plan to deliver the material?
Good luck,
Hunt
PS - this ARTICLE might prove useful. -
Please help me with my export settings
Hi,
I am really hoping someone might be able to advise me on my export settings for the following:
I created a screen recording using iShowU with the following settings:
16:9
960x540
Normal frame rate: 10
Compression: Apple Intermediate Codec.
The recordings all look perfect, really high quality.
I then import them into iMovie. However, after editing them, when I export them from iMovie, the movie quality is always degraded, faded / blurry - not sharp at all.
I have tried every export setting I can think of... and I really don't know what else to try.
I would be very grateful if you could suggest some settings for me to use. I don't care about file size - I just want the screen recordings to look as crisp as they did when before they were imported into iMovie!
Thanks, I really appreciate your advice.Hi emmettu2,
Did you ever figure this out? I'm in exactly the same situation. I have great video from iShowU. It's 1024x768, 30 fps, Animation compression codec. It's a .mov file that looks great played in the QuickTime player. I can't even tell it's a movie -- it just looks like the screen I captured.
I bring it into iMovie '09, trim the ends, and Export to QuickTime using no compression and the same fps and size. The output quality is noticeably lower than the input quality. I just want to trim the ends off a video without wrecking it. That really doesn't sound like it should be that hard, but so far, it's been impossible.
-- Dan -
PCUI 4.0, Search Help Required for New field
Hi everyone
I am working in CRM 4.0 Sales Order application
We created a new field in CRM sales Order in Header level in SAP GUI through EEWB.
The search help for the new field is working fine in SAP GUI. We want to add the same field with F4 help functionaliity in PCUI as well.
The field has been added in structure CRMT_BSP_SLS_OD1_General. It also shows domain value for the field however Origin of input field ie empty
The field has been added in PCUI and is successfully showing data inputted in SAPGUI
However we need search help functionality for the field
i tried these two steps
1) i checked on domain value checkbox and changed the field from input to dropdown. However the dropdown is empty in PCUI. Whenever i check box domain values for some field then all the possible values in SPA GUI are displayed in PCUI, however this is not working here.
2) I put Value_table in F4 of the field
This is also throwing up empty values
Am i missing something in this case
Please let me know how to go about it
TIA
AsadHi Frederic
Thanks for your response
I am not sure what is meant by regenerating the field group in this case
I added the entries for my view in the field group and generated the layout of the field group (If this is what you mean)
The field is working fine. I am able to save values to the field and able to see values saved in GUI.
I haven't linked search help of the field in PCUI
I am not sure how to go about it.
I used the data element in the structure for the field.
The data element has Domain entry in <b>Entry Help/Check</b> of the structure
If i check the Domain Value checkbox in my field group then the domain values should be available in dropdown if the field is dropdown
However i am not able to see the possible values of the field (It is present in SAP GUI)
Does something else needs to be done in this case
TIA
Asad -
Input help required for parameter on the selection screen
hi all,
i have created two parameters on the selection screen.
1. deptno
2.empname
so my requirement is if i input any deptno then i should get all
the empname corresponding to that deptno in the parameter empname
ie for deptno 10 there should be f4 help for empname.
here i am pasting my code plz check where i am doing wrong--
*& Report ZTEST10
*& Developer
*& Date: &DATE
REPORT ZTEST10.
tables: zemployee1.
parameters: p_deptno like zemployee1-deptno,
p_empnam like zemployee1-empname.
Data: begin of itab occurs 0,
deptno like zemployee1-deptno,
empname like zemployee1-empname,
empno like zemployee1-empno,
end of itab.
At selection-screen on value-request for p_empnam.
select empname
from zemployee1
into corresponding fields of table itab
where deptno = p_deptno.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
DDIC_STRUCTURE = ' '
retfield = 'empname'
PVALKEY = ' '
DYNPPROG = sy-repid
DYNPNR = sy-dynnr
DYNPROFIELD = 'p_empnam'
STEPL = 0
WINDOW_TITLE =
VALUE = ' '
VALUE_ORG = 'C'
MULTIPLE_CHOICE = ' '
DISPLAY = ' '
CALLBACK_PROGRAM = ' '
CALLBACK_FORM = ' '
MARK_TAB =
IMPORTING
USER_RESET =
tables
value_tab = itab
FIELD_TAB =
RETURN_TAB =
DYNPFLD_MAPPING =
EXCEPTIONS
PARAMETER_ERROR = 1
NO_VALUES_FOUND = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
I will award ur efforts.
Thanks
sanjeevHi Sanjeev,
If you input any deptno and you should get all the empname corresponding then first you need to use CALL FUNCTION 'DYNP_VALUES_READ'.
EXPORTING
DYNAME = sy-repid
DYNUMB = sy-dynnr
TRANSLATE_TO_UPPER = ' '
REQUEST = 'A'
PERFORM_CONVERSION_EXITS = ' '
PERFORM_INPUT_CONVERSION = ' '
DETERMINE_LOOP_INDEX = ' '
TABLES
DYNPFIELDS = gt_dynp
declare: DATA : gt_dynp LIKE dynpread OCCURS 0.
loop at gt_dynp into wt_dynp where fieldname = 'P_SUPRID-LOW'.
lv_low = wt_dynp-fieldvalue.
endloop.
Then while selecting use this p_superid-low instead of p_deptno.
Then :
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
After this funtion module:
write:
IF sy-subrc = 0.
READ TABLE itab
INDEX 1.
'p_empnam' = return_tab-fieldval.
Declare return_tab as:
DATA: return_tab LIKE ddshretval OCCURS 0 WITH HEADER LINE.
Thanks,
Shweta
ENDIF. -
Help required for Creation of process chain for Open hub destination(table)
Hi Experts,
I am working on creating process chain for the open hub destination which is targeting data transfer into Table. Which is then push to SAP PI.
2.) Steps to create a process chain for OHD????? Not knowing and even after that
3.) What are the steps for Pushing it to PI (I mean we have generated client proxy also) But need to know ABAP related to trigger process chain
please need your expertise and knowledge. Well atleast with the point 2 I need BI experts help...
Regards,
[Gaurav Patwari|http://gauravpatwari.wordpress.com]Hi Gaurav,
Creating Process chain for OHD.
1. Go to RSPC-> Create a astart variant.
2. Click on process typesin the menu. Fourth from the left. Under this go to LOAD PROCESSES AND POST PROCESSING option.
3. The fifth option is "DATA EXPORT INTO EXTERNAL SYSTEMS". Click on that.
4. Click on F4 and choose your infospoke name.
5. Press the RIGHT button.(if it asks for variant, create a new variant in the same small window besideswritting bar).
6. Join the START process and the 2nd process via dragging.
7. Now add your required other processes.
The general process chain processes are :
1. Start.
2. Delete Indexes (if data loaded to cube).
3. Load process.
4. Delete duplicate request (if it is a full load in cube).
5. Create Indexes.
Hope it helps.
Preet -
Help! Urgent help required for adjusting image
Hi - hoping someone can help.
I sent the attached PDF - http://www.sensecreative.co.uk/custUploads/SENSE-36-7977-95928/77317/SENSE-36-7977-95928-7 7317-2440.zip - to print with Sense Creative. The cards were printed and they've turned out quite visibly green on the reverse (where it should be white).
I've printed the artwork on several printers I have access to and it looks as it should, however SC are saying that the issue is with the artwork
"The green tinge you see on the reverse of these cards is prevalent in the artwork. The makeup of the background is approximately c-15 m-11 y-15 k-0. the predominant levels of the yellow and cyan will give you the green tint. Upping the levels of the artwork in or substituting the cyan, magenta and yellow levels with more black in Photoshop will likely give you the result you require. We are satisfied that in both instances, the artwork has printed correctly and the colours are well within tolerance given the nature of the artwork."
So, I'm in a bit of a pickle as the cards are needed for an event next week.
How do I change the image levels? Or are they talking nonsense and trying to pass the buck?
Help!station_two,
Acrobat View> Tools> Print Production> Output Preview: Object Inspector will call out the objects' profiles if you click on each one individually (in this case all appeaar to be "Device CMYK" or Untagged CMYK)
untagged CMYK has the same pitfalls as untagged RGB... if one applys or assumes the wrong SOURCE PROFILE it doesn't CONVERT colors to Monitor RGB or Print Space correctly -
Urgent help required for network configuration
sir
i have a mixed scenario right now.
I have only three computer on home network.
1.vista accer travelmate 4720 laptop loaded with vista sp1 ultimate
2.normal pc : Core2 duo with XFX ATI REDION graphics card and this pc is loaded with OEL 5.3.x linux but this pc has 2 NICs(eth 0,eth 1) I have connected both with a switch and the switch is connected to a modem for internet.can I use one NIC as private and another NIC as public to access internet?
3. normal pc : P4 HT and its loaded with win xp sp2 having eth 0
how to set my network.
I have connected each NIC with a D-Link switch.And the D-Link switch is connected with DataOne Nokia Siemens network c2110 modem.
But problems are that
1) each time i can connect only one PC at a time.
2)OEL 5.3.x is not connected to the specified modem ever....by [adsl seup|http://forums.oracle.com/forums/thread.jspa?threadID=832112&tstart=0] command.should i configure it during installation?is there any easy shell scriot avilable to do this stuff?
please help as soon as you can.......
regards
Edited by: mango_boy on Sep 7, 2009 4:44 AMifconfig output:
eth1 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1 errors:0 dropped:0 overruns:0 frame:0
TX packets:38 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:243 (243.0 b) TX bytes:9406 (9.1 KiB)
Interrupt:16 Base address:0xec00
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:3779 errors:0 dropped:0 overruns:0 frame:0
TX packets:3779 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:6124500 (5.8 MiB) TX bytes:6124500 (5.8 MiB)
virbr0 Link encap:Ethernet HWaddr 00:00:00:00:00:00
inet addr:192.168.122.1 Bcast:192.168.122.255 Mask:255.255.255.0
inet6 addr: fe80::200:ff:fe00:0/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:28 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:8360 (8.1 KiB)
xenbr0 Link encap:Ethernet HWaddr 00:00:00:00:00:00
UP BROADCAST RUNNING NOARP MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)adsl-setup output
[root@localhost ~]# adsl-setup
Welcome to the ADSL client setup. First, I will run some checks on
your system to make sure the PPPoE client is installed properly...
LOGIN NAME
Enter your Login Name (default root): kris_9929
INTERFACE
Enter the Ethernet interface connected to the ADSL modem
For Solaris, this is likely to be something like /dev/hme0.
For Linux, it will be ethX, where 'X' is a number.
(default eth0): eth1
Do you want the link to come up on demand, or stay up continuously?
If you want it to come up on demand, enter the idle time in seconds
after which the link should be dropped. If you want the link to
stay up permanently, enter 'no' (two letters, lower-case.)
NOTE: Demand-activated links do not interact well with dynamic IP
addresses. You may have some problems with demand-activated links.
Enter the demand value (default no):
DNS
Please enter the IP address of your ISP's primary DNS server.
If your ISP claims that 'the server will provide dynamic DNS addresses',
enter 'server' (all lower-case) here.
If you just press enter, I will assume you know what you are
doing and not modify your DNS setup.
Enter the DNS information here: server
PASSWORD
Please enter your Password:
Please re-enter your Password:
USERCTRL
Please enter 'yes' (three letters, lower-case.) if you want to allow
normal user to start or stop DSL connection (default yes): yes
FIREWALLING
Please choose the firewall rules to use. Note that these rules are
very basic. You are strongly encouraged to use a more sophisticated
firewall setup; however, these will provide basic security. If you
are running any servers on your machine, you must choose 'NONE' and
set up firewalling yourself. Otherwise, the firewall rules will deny
access to all standard servers like Web, e-mail, ftp, etc. If you
are using SSH, the rules will block outgoing SSH connections which
allocate a privileged source port.
The firewall choices are:
0 - NONE: This script will not set any firewall rules. You are responsible
for ensuring the security of your machine. You are STRONGLY
recommended to use some kind of firewall rules.
1 - STANDALONE: Appropriate for a basic stand-alone web-surfing workstation
2 - MASQUERADE: Appropriate for a machine acting as an Internet gateway
for a LAN
Choose a type of firewall (0-2): 1
Start this connection at boot time
Do you want to start this connection at boot time?
Please enter no or yes (default no):no
** Summary of what you entered **
Ethernet Interface: eth1
User name: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Activate-on-demand: No
DNS addresses: Supplied by ISP's server
Firewalling: STANDALONE
User Control: yes
Accept these settings and adjust configuration files (y/n)? y
Adjusting /etc/sysconfig/network-scripts/ifcfg-ppp0
Adjusting /etc/ppp/chap-secrets and /etc/ppp/pap-secrets
(But first backing it up to /etc/ppp/chap-secrets.bak)
(But first backing it up to /etc/ppp/pap-secrets.bak)
Congratulations, it should be all set up!
Type '/sbin/ifup ppp0' to bring up your xDSL link and '/sbin/ifdown ppp0'
to bring it down.
Type '/sbin/adsl-status /etc/sysconfig/network-scripts/ifcfg-ppp0'
to see the link status.Edited by: mango_boy on Sep 7, 2009 9:02 AM
added adsl setup output
Edited by: mango_boy on Sep 7, 2009 9:15 AM -
Urgent help required for update Plz help!!
Hi i am updating my E51 and its displaying updating software please wait estimated time left 15 minutes for the past 1 hour.
Please tell me what should i do....
Its really urgent pls help....Hi,
There might be a problem with either the NSU or the phone itself. Any updates on what happened?
Next time make sure you meet the certain system requirements before proceeding with the update.
Message Edited by nj15 on 01-Oct-2008 01:44 PM
Maybe you are looking for
-
File to IDoc - How to proceed further?
Hi everybody, Consider the following scenario, <Header> <Transaction> <Meterpoint> <Address></Address> <Asset> <Meter></Meter> <Conversion></Conversion> <Register></Register> </Asset>
-
TS3474 Display doesn't work, although iPod plays through other devices
Anybody know how to fix this?
-
When I run below code as standalone, the notepad is coming up successfully. but when i run through jnlp i could only see the frame with OK button. but the note pad is not popping up. I run this example in eclipse. Example.java import java.awt.*; impo
-
[solved] Anjuta crashes at startup
Hi When I start Anjuta (1.2.2) it crashes with the follwing dialog-box-message: The Application "anjuta" has quit unexpectedly. [etc...] The terminal output: (anjuta:4049): GLib-GObject-WARNING **: IA__g_object_set_valist: construct property "type" f
-
Missing Files. LR 1.1.
All of a sudden I've got 590 'Missing Files'. All from the same folder. None are marked with a '?'. No folders are 'Red Flagged'. When using 'Show in Explorer', the files are shown to exist, in the relevant folder, exactly as they should. So they're