Help Required for Reverde the material

Dear All,
         For the material by mistake given valuation category and instead of giving price control V given S and value given in Movering average price.
            MRP run has taken place and stock has come inside with is reversed for some order.
               I want to reverse the stock which is reserved.can any one explains me how to reverse it,

If you want to delete the reservation go to MB22>Enter the reservation no>flag the check box od "D" that is at the letf side of the item. then Save it.
Again go to MB22 >go to header>Reservation>delete

Similar Messages

USELESS ONLINE HELP FACILITIES For all the amazing productivity aids that APPLE offers the world I have to report that their online support service is worse than useless and has recently been the source of immense time wasting and irritation.

USELESS ONLINE HELP FACILITIES
For all the amazing productivity aids that APPLE offers the world I have to report that their online support service is worse than useless and has recently been the source of immense time wasting and irritation.
Incident 1. Since many months attempts to download new and updated APPs produced a response – Apple ID Disabled. I had no time to consult an APPLE Store due to work in distant lands. When I finally visited yesterday I was told that as my IPAD has been reported as stolen, and APPLE in its wisdom had blocked its usage! I am not sure how they became so misinformed and nobody every advised me while with a few swift moves APPLE could have located me by email address or SKYPE.
Incident 2. Once the above anomaly had been fixed I tried to down load a newspaper and diligently input my address, credit card number and personal data. Repeatedly I was advised that my Credit Card was invalid and my postal code was incorrect! Really!
I was left to guess that having moved from UK to the US I should have advised APPLE! Not being told of this requirement brought about a second visit to APPLE Store in the same day to waste both mine and their time with a routine anomaly. How parochial in the context of a globalized world!
In each case I tried to resolve the issues using online access to a help line and by calling by phone at the numbers on the APPLE Website. In each of four separate occasions I diligently went through the routine and ended up with a message that thanked me for contacting Apple followed by a polite ‘Good Bye’!
In desperation I went to an Apple Store for the second time in a day as it is close to where I live when I am not working. On both occasions I was courteously attended to by Apple Staff.
However, my work is usually far away from the US and it is generally many thousands of miles to the nearest Apple Store therefore online help is viewed as imperative if one is to resolve issues away from home.
Why can Apple not provide a clearly marked EMAIL address and Telephone number at a Help Desk with real people to respond to requests for help? It would cost nothing in relative terms and might restore my high level of anti-APPLE sentiment that these two recent events have provoked.
Peter Hanney
Miami, Fl.

Why can Apple not provide a clearly marked EMAIL address and Telephone number at a Help Desk with real people to respond to requests for help?
If that is your question, the answer is at the bottom right of this web page. It is clearly marked "Contact Us" and is the best way, really the only way, to contact Apple.
If there were a publicly posted email address for concerns such as yours, it would be quickly filled with spam in about three minutes, thereby becoming instantly useless to you and everyone else. Apple would need to change it hourly, if not more often. That is also the reason you ought not to post your name, location, and what appears to be your iPad's serial number on this publicly viewable website.
Apple does not respond here and I can find no other questions for your fellow Apple users to answer.

MD03- Run MRP for all the material

Hi Expers,
How to run the MRP for all the material in the Plant.In Transaction MD03 we can have the option for entering the only one material at one time.If we have 10000 material then do we have to run the MRP for 10000 time?
Kindly guide me....
Regards,
Devi.

MDBT transaction is used to for background MRP Run
Click the below link for more details on how to proceed further.
http://www.sap-img.com/pp019.htm
Scheduling Background Jobs for MRP
Transaction code : MDBT
click Create Variant button (specified a variant name and click continue).
Then fill in the following fields :-
Scope of Planning         : Optional (refer to Note if you want to specify a plant grouping)
Plant                             : Your company Plant
Processing Key             : NETCH
Create PUrchase Req. : 1
Schedule lines               : 1
Create MRP lists          : 1
Planning mode              : 1
Scheduling                    : 1
Planning date                 : default date
Click the Back button and you will be prompt Save Values.
Type in a Description and click the Save button.
After creating the variant, park your cursor at the variant and click the Schedule job button.
Fill in the Date and Time value.
Click Schedule periodically and you are prompt to choose the period.
Click the Create button and you are done.
To check, you can click the Show Scheduling button.
Note :
Define Scope of Planning for Total Planning in 'OM0E'.
1. Choose New entries.
2. Enter a key and a description for the scope of planning that you would like to define. Save your entries.
3. Select the scope of planning and choose Sequence of plants/MRP areas.
4. Choose new entries and enter the plants or the MRP areas in the sequence in which they are to be planned.
    The counter determines the sequence.
5. Save your entries.
Hope this helps.
Regards
Dipak

My PowerBook-G4 operating system software - Mac OS X 10.5.8 - does not meet minimum requirements for downloading the latest version of FireFox ... is there an Update for a newer version of my op.sys. software, or, what is a better choice of an Upgrade?

my PowerBook-G4 operating system software - Mac OS X 10.5.8 - does not meet minimum requirements for downloading the latest version of FireFox ... is there an UpDate to a newer version of my op.sys. software, Or, what is a better choice of an UpGrade to a newer/different op.sys. software ?
Thanx!

The best maintained PowerPC browser at the moment is TenFourFox:
http://www.floodgap.com/software/tenfourfox/
It is a Mac port of a newer version of FF thatn any PowerPC Mac can support natively. It runs, looks and feel like FF.
I found some add-ons that helped TFF with speed issues. Pleae see my post in another PPC forum:
FYI: Speed-up for TenFourFox on PowerPC

Standard reports for fetching the Material Characteristics

Hi,
Do we have any standard reports in SAP for fetching the Material Characteristics.
Regards,
Siv

Dear,
Check the related links... may be helpful:
To fetch characteristic value (ATWRT) from material number
Material characteristics datasource
Characteristics Table ?
Characteristics Table ?
Regards,
Syed Hussain.

I want better solution for adjusting the Material stock values for the last

my Customer need to adjust( Decrease) the closing stock values for the following materials / plant wise as on 31.03.2006 for meeting statuary compliance.
Material1 : RS: 4149599    QTY : 10181.03 Ltrs
Material 2 : RS: 1318596     QTY: 2152.76   Ltrs
As per my knowledge MM posting periods can open current month and Previous month only. For the reason I proposed the solution as follows:
Step 1 : post FI Journal Entry on 31.03.2006
Opening Balance G/L Account Dr 4149599 + 1318596
Closting Stock a/c                      Cr 4149599 + 1318596
Step 2.
Change the Material Price in MM through T.Code: MR21
( Posting will be allowed in current or previous months)
This makes our CO reports accurate.
Please suggest the better solution if it is possible in MM for adjusting the Material stock values for the last financial year.
WIth Best Regards,
Rajesh
<b></b>

Hi Madhavan,
Unfortunately this forum deals with migrations from non-Oracle
environments to Oracle. You seem to be dealing with migrations in
an Oracle environment mainly.
I would recommend that you contact Oracle Applications and RDBMS
support directly. They will have the most up to date
information/advice on performing these actions.
Regards
John
Madhavan (guest) wrote:
: Hi John
: Thanks for your reply.
: Actually I am planning to upgrade the system.
: 1. I Want to Upgrade Oracle Financials release 10.7 to the
: latest version (11.x)
: 2. Oracle 7 database to oracle 8 or 8i.
: 3. Oracle is running on NT service pack 3. Do I need to upgrade
: this?. If not what is the impact on Windows NT?
: 4. Is the majority still running smart client 10.7 and database
: 7?
: 5. What is the necessary time to implement these upgrades? What
: type of consulting I need to have?
: 6. I have some employees working on it? Will these changes
: affect them?
: What type of precautions I need to take on the whole??
: Thank You
: Madhavan
Oracle Technology Network
http://technet.oracle.com
null

Requirement for getting the VAT Taxes automatically from the vendor invoice

Dear All,
We Have a Requirement for getting the VAT Taxes automatically from the vendor invoice in to the Sales invoice after invoice verification process.Is this feasible?. Can anybody explain how this can be done to overcome this issue.
Thanking you,
Best regards,
R.Srinivasan

hi,
technically i do not think tht can be done. but even from functional part its incorrect in the sense tht the values on which tax is calculated in purchase may be very different from tht in sales. so we may never get the correct picture.
saurabh

SAP standards for retriving the Material Master Data

Can someone provide me list of all SAP standards for retriving the Material Master Data with respect to views.
Standard Reports
Function Modules
RFC's
BAPI's.
T.codes
Sample code's
useful answers will surely be awarded.
Regards
Vinayak

Hi,
These are the standard BAPI's for Material master.
BAPI_MATERIAL_DELETE Flag Material for Deletion
BAPI_MATERIAL_DISPLAY Display Material
BAPI_MATERIAL_EDIT Change Material
BAPI_RETAILMATERIAL_CREATE Create Material
BAPI_RETAILMATERIAL_DELETE Discontinue Material
BAPI_STANDARDMATERIAL_CREATE Create/Extend Material
BAPI_MATERIAL_SAVEREPLICA BAPI for Mass Maintenance of Material Data
BAPI_MATERIAL_SAVEDATA Create and Change Material Master Data
BAPI_MATERIAL_EXISTENCECHECK Check Existence of Material
BAPI_MATERIAL_GETBATCHCERT Create Quality Certificate for Batch in Portable Document Format (PDF)
BAPI_MATERIAL_GETBATCHES Create Batch List for a Material
BAPI_MATERIAL_GETCHARMERCHHIER Supply Characteristics of Retail Material for Material Group Hierarchy
BAPI_MATERIAL_GETINTNUMBER Assign New Internal Numbers for a Material Type
BAPI_MATERIAL_GETINTNUMBERRET Assign New Internal Numbers for a Material Type for Retail Materials
BAPI_MATERIAL_GETLIST Supply List of Materials for Search Criteria Transferred
Thanks.,

Created sales order for one division, for which the material belongs to ano

Dear All,
A sales order has been created for a division 10, for which the material belongs to some other division 20 in material master.
When we are create a sales order for 10 division ( the one which we give at organzational data) at the item level the material which we select should also belong to the same division, if the material division is different as 20 the system will throw an error at sales order saying "ship-to-party so and so is not created for the sales area so and so.."
But here it's allowing me to create a sales order for division 10 with 20 Division material without any error. But this should not happen.
Checked in the document type VOV8 where at the Check division field 2 has been there.
Please suggest

Hello,
Let me explain the concept of Header division and item division...the header division is the one which gets copied from the sales area division that gets determined in the sales doc creation from SP.
The item division is the division that gets copied from the material master in the line item material.
In the Sales document type , there is a check box "Item Division". If this is marked, then system takes the division from the Mat master. if this is not marked system the system doesnt find from MMR instead it picks up from header division.
The check division controls, how the system should behave in case the header and item division differ..
Rgds,
Rags.

Patches required for installing the configuration management workbench?

Hi Team,
Please list all patches required for installing the configuration management workbench in Oracle Apps version 11.5.10.2 ?
Please let me know.
Thanks,
Suman V.

Hi;
I also suggest to check:
How to Configure the Oracle Configuration Manager with Support WorkBench [ID 1174943.1]
Regard
Helios

Dear Friends, I am trying to draw a structure in Adobe Illustrator with 3D effect. But I am unable to give it proper shape. Can someone please help me for drawing the similar structure as showed below. I have facing problems in giving 3D effect.

Dear Friends, I am trying to draw a structure in Adobe Illustrator with 3D effect. But I am unable to give it proper shape. Can someone please help me for drawing the similar structure as showed below. I have facing problems in giving 3D effect.
Thanks a lot for your great help...

i made a quick example:
and what it's made of:
just shapes and gradients. used a combination of pathfinder and shape builder to get the shapes exact.

Help me for writing the password script on solaris

hi,
help me for writing password scripts to change the user/root password.
in the script itself myself want to mention the new password.
now user want to login with the new password only.
model script:
echo $test:`perl -e '$x=crypt('$test123','test');
print $x'`::::::: >> /etc/shadow
test--->username
test123---->new password.
the above script is not working.
kindly help me for writing the script.
Regards,
raja

Well. For one thing, if you just append the new password to the /etc/shadow file there will be two entries for the user in that file (at least if the user already had a password). Which probably is a bad thing.

Help required for temporary removing node 2 from the cluster

Hi Support,
There are some hardware issues on node 2 of 11g RAC cluster and vendor going to fix it;
We want to make node 2 not available until they fix it;
The user will continue with node 1 of the cluster;
Following are the current status of the site and I'm considering to perform the folowing task
while the folllowing command from node 1, i got the following output
D:\srvctl status database –d EPVAL
Instance epval1 is running on node corskmaps001
Instance epval2 is running on node corskmaps001
D:\srvctl status database –d EPPROD
Instance epprod1 is running on node corskmaps001
Instance epprod2 is running on node corskmaps001
I made the following steps in chorological order; I appreciate if someone can correct me if I made any mistake or add/amend/update as per requirement.
Assuming corskmaps002 is our passive mode which will be taken away by HP for hardware checking;
srvctl stop instance –d EPPROD -i EPPROD2
srvctl stop instance –d EPVAL -i EPVAL2
srvctl stop listerner_corskmaps002 –n corskmaps002
srvctl stop nodeapps -n corskmaps002
Do we require stopping service also once we stop the instance? Following are the commands if your answer is yes;
srvctl stop service -d EPROD -i EPPROD2
srvctl stop service -d EPVAL -i EPVAL2
srvctl disable service -d EPPROD -s EPPROD2
srvctl disable service -d EPVAL -s EPVAL2
I appreciate help
Thanks

Hi Bjoern,
I agree with you, very valid point, thanks for that;
Just for clarification, do you thing the sequence should be like this?
********disable command to start with***********
srvctl disable service -d EPPROD -s EPPROD2
srvctl disable service -d EPVAL -s EPVAL2
*********than instance stop commad**********
srvctl stop instance –d EPPROD -i EPPROD2
srvctl stop instance –d EPVAL -i EPVAL2
************than listener stopping command********
srvctl stop listerner_corskmaps002 –n corskmaps002
*************than node stopping command*********
srvctl stop nodeapps -n corskmaps002
*********do we also require stopping of the service ?>***************************
Do we require stopping service also once we stop the instance? Following are the commands if your answer is yes;
srvctl stop service -d EPROD -i EPPROD2
srvctl stop service -d EPVAL -i EPVAL2
Can you please eleborate further
Then, you also might want to add '-o transactional' or "transactional local" to the
instance stop command so that running transactions are not affected by this.
Thanks

Help required to understand the concepts for data files in tablespace

Hi Guys!
Conceptual understanding for data files.
A tablespace is having 2 datafiles.
What once the data files will get full? I know we can create data files but what if there is no space on the server for any additional file to be created?
Do we require to make the oldest file offline and move outside the environment?
Thanks

782790 wrote:
Hi Guys!
Conceptual understanding for data files.
A tablespace is having 2 datafiles.
What once the data files will get full? I know we can create data files but what if there is no space on the server for any additional file to be created?
Do we require to make the oldest file offline and move outside the environment?
ThanksIf the datafiles are full, there is not much that you would get from the "defragmentation" of the datafiles. It would be sort of like this in the start,
FFFFFFFFFFFFFFFFFFFFFFFFFF
Then it will be ,
FFFFFFFUUUUUFFFFFUUUUUU
So what you are going to get is something like this, (if would be done),
FFFFFFFFFFFFFUUUUUUUUUU
So that's how the datafile would like. But that won't give you much of the space anyways still. The option to add a storage must be there with you. The file being offline wont take away the space that it has already allocated. And moreover, doing so, would also impact the access to the data that it would be storing within it.
HTH
Aman....

Help required: characteristic values of material

Hi all,
My requirement is to print description of the articles shipped.
The print program is RVADTR00 (print prg for transaction VT02N)
The description of articles means the characterstics
The logic mentioned is as follows:
(Go to KSML, for class# XXXX, to get the internal characterstic KSML-IMERK.
Use IMERK to get all the characterstic values from table CAWN, CAWN-ATWRT)
Now my question is, does the standard program retreive these values into any structure.
Else, do I have to use the above mentioned logic, If yes can you tell me if
there are any standard function modules to find the characterstic values of the class to
which the material belongs.
Thanks

Hi,
Your logic should work but I would prefer to use BAPI_OBJCL_GETDETAIL or function module CLAF_CLASSIFICATION_OF_OBJECTS to get what you need.
Hope this helps.
H Narayan

Help Required for Reverde the material

Similar Messages

Maybe you are looking for