Help required for the users report requirement
Hello,
User requirement is to get the report as follows
Period planned order Production order Backlog
Feb2008 15 3 18
March2008 4 11 15
Backlog is the formula for planned order & production order.
My problem is that, In the cube the data for planned order is the char value 'X' or a blank.
It has to count the total of planned order for the entire month of feb,& print the value counting the number of 'X',here as shown as 15.
Planned order, Production order are in rows & are chracteristics.
Is thr any solution to count master data which has a char value(X).
I have tried using the formula variable.I had created the new formula.Then using the data functions as count(Formula variable),using the replacment path.But it did not work
Help me out to find the total for the char value of the master data.
Help would be rewarded!
Hello,
For BACKEND:
1) Create a normal KF say counter and include it in the cube.
2) Now you can populate the value for this KF via end routine in transformation.
3) You need to check whether the value for planned order is X. If yes then update KF with value 1.
4) I hope you can take care of this routine part. Once this is done the data in the cube might look in below manner:
Month Planned-Order Counter
Feb 2007 | X | 1
Feb 2007 | X | 1
Feb 2007 | | 0
Feb 2007 | X | 1
Feb 2007 | | 0
Mar 2007 | | 0
Mar 2007 | X | 1
Mar 2007 | | 0
Mar 2007 | | 0
Mar 2007 | X | 1
Now in the report if you include month and counter the report will look like
Month Counter
Feb 2007 | 3
Mar 2007 | 2
If you see the counter is getting aggregated to give you the sum against the value of planned order as X against month.
I think this should work.
If this dosent work let me know i will let you the alternate solution for frontend. but for that too you need to make the above backend changes.
So do the backend changes and try to use counter KF for showing planned orders and i think it should work fine.
Regds,
Shashank
Similar Messages
-
I have a requirement for the Standard report like QA33
Hi All
I have a requirement for the Standard report like QA33. The requirement is that, in the output of QA33,
The Requisitioner, Purchasing group and Tracking Number should be displayed
Please give me suggestions to do this
I searched for User Exits and I found QEVA0004, QEVA0005, QEVA0006, QEVA0007, QEVA0008, QEVA0009, QEVA0010, QLCO0001, QSS10001.
In the Above which exits I can use and how to implement them
Pls reply
Thnx in Advance
Regards
P KAMALWhen changing or deleting one or more lines of the internal table
"\PROGRAM=ZRQEEAL10\DATA=SELECT_FIELDS" or when inserting in the table
"\PROGRAM=ZRQEEAL10\DATA=SELECT_FIELDS", 0 was used as
the line index. An index less than or equal to zero is not
allowed.
The error can occur when using the following options:
1. "INDEX idx" for specifying the line number in the table
"\PROGRAM=ZRQEEAL10\DATA=SELECT_FIELDS"
where you want to change, insert or delete.
2. "FROM idx" for specifying the start index when deleting a line
area from or inserting a line area into the table
"\PROGRAM=ZRQEEAL10\DATA=SELECT_FIELDS".
3. "TO idx" for specifying the end index when deleting a line
area from or inserting a line area into the table
"\PROGRAM=ZRQEEAL10\DATA=SELECT_FIELDS".
At the time of the termination, the table contained 2 lines.
This is the error
I went to se80 and copied the whole program - > but getting this error -
i have installed Adobe Acrobat XI on citrix (server 2008, x64) and need to suppress repair option in Help menu for the users via registry. Have tried Disable_repair dword key in HKLM\software\Wow6432Node\Adobe\AdobeAcrobat\11.0\Installer and it does not work. please help.
Look in the ETK Preference Reference here: Installer settings
-
An internal error occurred on the report server. See the error log for more details. (rsInternalError) Get Online Help The profile for the user is a temporary profile. (Exception from HRESULT: 0x80090024)
while proview the report i will get this error am using sql server 2008R2,
can u plesae hlep me out for this
<Header>
<Product>Microsoft SQL Server Reporting Services Version 2009.0100.1600.01 ((KJ_RTM).100402-1539 )</Product>
<Locale>English (United States)</Locale>
<TimeZone>W. Europe Standard Time</TimeZone>
<Path>C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVEREPORT\Reporting Services\Logfiles\ReportServerService__01_30_2015_03_09_32.log</Path>
<SystemName>WEGDACM1</SystemName>
<OSName>Microsoft Windows NT 6.1.7601 Service Pack 1</OSName>
<OSVersion>6.1.7601</OSVersion>
<ProcessID>4880</ProcessID>
<Virtualization>Hypervisor</Virtualization>
</Header>
rshost!rshost!5e4!01/30/2015-03:09:32:: i INFO: Currently registered url http://+:80/ReportServer_MSSQLSERVEREPORT/ on endpoint 2
rshost!rshost!5e4!01/30/2015-03:09:32:: e ERROR: Failed to register url=http://+:80/Reports/ for endpoint 3, error=b7.
rshost!rshost!5e4!01/30/2015-03:09:32:: w WARN: Endpoint 3 is enabled but no url is registered for vdir=/Reports, pdir=C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVEREPORT\Reporting Services\ReportManager.
servicecontroller!DefaultDomain!1e30!01/30/2015-03:09:32:: e ERROR: Error creating HTTP endpoint. System.Runtime.InteropServices.COMException (0x800700B7): Cannot create a file when that file already exists. (Exception from HRESULT: 0x800700B7)
at Microsoft.ReportingServices.HostingInterfaces.IRsUnmanagedCallback.CreateHttpEndpoint(RsAppDomainType application, String[] urlPrefixes, Int32 cPrefixes, String[] hosts, Int32 cHosts, Boolean wildCardPresent, String virtualDirectory, String
filePath, Int32 authType, Int32 logonMethod, String authDomain, String authRealm, Boolean authPersist, Int32 extendedProtectionLevel, Int32 extendedProtectionScenario, Boolean enabled)
at Microsoft.ReportingServices.Library.ServiceAppDomainController.SetWebConfiguration(RunningApplication rsApplication, Boolean enabled, String folder)
rshost!rshost!65c!01/30/2015-03:09:32:: i INFO: Endpoint 4 is disabled and no url is registered vdir=/ReportServer_MSSQLSERVEREPORT/ReportBuilder, pdir=C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVEREPORT\Reporting Services\ReportServer\ReportBuilder.
rshost!rshost!1e30!01/30/2015-03:09:32:: i INFO: Derived memory configuration based on physical memory as 16776696 KB
servicecontroller!DefaultDomain!1e30!01/30/2015-03:09:32:: i INFO: Recycling the service from the default domain
rshost!rshost!1e30!01/30/2015-03:09:46:: i INFO: Application domain type WindowsService statistics: created: 7, unloaded: 7, failed: 0, timed out: 0.
appdomainmanager!DefaultDomain!1e30!01/30/2015-03:09:46:: i INFO: Appdomain:11 WindowsService_7 started.
library!WindowsService_7!1e30!01/30/2015-03:09:46:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. ;
servicecontroller!WindowsService_7!1e30!01/30/2015-03:09:46:: e ERROR: Error initializing configuration from the database: Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration
error.
resourceutilities!WindowsService_7!1e30!01/30/2015-03:09:47:: i INFO: Reporting Services starting SKU: Enterprise
servicecontroller!WindowsService_6!1e30!01/30/2015-03:09:47:: i INFO: Service controller exiting.
appdomainmanager!DefaultDomain!1e30!01/30/2015-03:09:47:: i INFO: Appdomain:10 unregistered.
appdomainmanager!DefaultDomain!1e30!01/30/2015-03:09:47:: i INFO: Appdomain:10 WindowsService_6 unloading.
appdomainmanager!DefaultDomain!1f40!01/30/2015-03:09:47:: i INFO: AppDomain:10 0 pending unload(s)
library!WindowsService_7!2410!01/30/2015-03:09:47:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. ;
library!WindowsService_7!2410!01/30/2015-03:09:47:: e ERROR: ServiceStartThread: Exception caught while starting service. Error: Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration
error.
library!WindowsService_7!2410!01/30/2015-03:09:47:: e ERROR: ServiceStartThread: Attempting to start service again...
library!DefaultDomain!202c!01/30/2015-08:04:43:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. ;
library!DefaultDomain!202c!01/30/2015-08:25:26:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. ;
library!DefaultDomain!202c!01/30/2015-08:26:16:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. ;
The above is my log file pls find it resolve my problem,am trying to add the encryption key to my configuration seetings it will through the error like The profile you were used is temporary profile. -
We have a free downloadable gaming service that requires flash player in order to operate properly.
I am trying to figure our how can I make users who don't have flash to download it, but I don't want these users to leave my service and start a different download flow in a different website (adobe's) .
I thought about several different options but don't know what would be considered legal or legit:
1. download flash along with my product- this means I will have to add another offer screen to my installation? if so, it will damage my conversion.
2. downloading flash for the user without consent- probably will result with AV alerts
3. open an iframe for users who don't have flash where I'll ask users to download flash--> that still will redirect users to adobe website to complete the process, which will damage my usage...
any comments on the above or additional ideas?
Thanks
TomUnfortunately, I don't think that our license currently grants the rights that you're looking for. We do allow for the inclusion of original installers on physical media to address the situation of installation where an Internet connection is not guaranteed to be available; however, the Adobe download center serves an important role in the cost-recovery efforts for the continued development, maintenance and distribution of Flash Player, which is a tremendously expensive undertaking. I think it's unlikely that we would agree to allow the inclusion of Flash Player installers in scenarios where the host installer requires an internet connection.
Here is a brief summary of the rights granted by this license:
Licensee is permitted to distribute Adobe Web Players to multiple clients in a closed intranet environment.
Licensee is permitted to distribute Adobe Web Players to multiple end-users by including the Player installers on CDs, DVDs or other physical media.
Usage of Adobe Web Players is only permitted for supported platforms; usage rights on non-PC devices or embedded systems are not granted by this license.
Licensee must use the installers as-is without modification.
Licensees, at their discretion, are entitled to display the Flash Enabled and/or Shockwave logos on products or intranet sites according to the Style Guide.
On the plus side, you don't have to worry about serving your users outdated or vulnerable Flash Player versions, and keeping those embedded copies constantly updated would be a lot of overhead.
Chrome and Internet Explorer on Win8+ always have Flash Player built-in, so those users are generally going to be in good shape (and you shouldn't redirect them to the download anyway, because we'll just give them a message about it already being installed). IE11 eliminates JavaScript support for conditional comments and various other methods for fingerprinting and targeting IE with IE-specific logic, so you'll want to pay attention to that experience, particularly on Win8+ (i.e. your detection logic might need to be tweaked on this config, if it's depending on isMSIE to do the correct thing... there is a lot of busted Flash detection in the world on this target at the moment...)
For NPAPI browsers (Safari, Firefox), users are going to have to close the browser to complete the install process, so I don't think that offering the download in an iframe is going to buy you much, and would probably make it more difficult to complete the installation steps, ultimately doing more harm than good.
In the case of Safari, the installer re-launches Safari at the end of the installation process, and it does so without reopening all of the previously opened tabs. I'm hoping that we won't have to live with that issue much longer, but I want to be transparent about the impact to your user experience. Safari users are going to lose the tab with your site in it during the installation process no matter what.
There's also an install mechanism called Express Install, which you can invoke automatically when you detect that Flash Player is not installed, or is below the version that you require. Off the top of my head, I don't know exactly what happens in every possible install scenario (patch update vs. feature update, by OS and browser). I think some configs require you to restart and others like IE on Windows don't. It's all dictated by browser limitations, which are constantly moving targets.
In short, we recommend that everyone use SWFObject2 for detecting Flash from JavaScript, and they make it pretty easy to invoke upgrades via ExpressInstall.
SWFObject: Javascript Flash Player detection and embed script | deconcept -
Requirement for the Q monitoring report
Hi experts,
i have this requirement. could you please tell me the solution.
<b>Requirement for the Q monitoring report
Transaction code LL01
Requirement: The report to be generated for the open documents in all six warehouses D01 to D06.
Option can be that one batch job should be created in ECQ which will run everyday and give us the report.
Variants are set for all warehouses to capture the report.
Please note that theses variant is set to capture all the Stocks in interim storage types except 915
Additional Variant is also set into the report to take the CREATED BY field in the displayed data. This can also be automated in the report.
The steps which we follow to get the report is as follows
Thanks & Regards
Venkat</b>Hi,
I donot think such Multi level Consumption Report is available. I think if use collective order concept, u can get it. Otherwise u have to pass the list Production order number for each BOM level at COOIS.
or u have to develop customized report.
Pradeep -
There seems to be quite a bit of confusion over the actual syntax for the user and group filters on the Forms Based Authentication Ldap Role and membership providers.. MSFT isn't really clear and there is a universal confusion in the blogsphere.
I the filters should the prefix be the ACTUAL Ampersand or the HTML token for an AMPERSAND.. I realize the in many cases the blogger might have inadvertently specified the html token when the bare naked ampersand was intended.. The question
therefore is : can a filter be taken directly from and ADSIEdit query and used as a filter or must the filter be made HTML safe by swapping out the AMERSAND with the HTML Token for AMERSAND before putting it into the configuration
for the LDAPRole/membership provider...
All science is either physics or stamp collectingHi GUYO,
I am not quite sure how we implement this on sharepoint side, as I did research and sharepoint may not have this feature to do this.
most of the LDAP for sharepoint may need to follow these steps in this article:
http://technet.microsoft.com/en-us/library/ee806890(v=office.15).aspx
http://blogs.msdn.com/b/sridhara/archive/2010/01/07/setting-up-fba-claims-in-sharepoint-2010-with-active-directory-membership-provider.aspxhttp://blogs.msdn.com/b/kaevans/archive/2013/01/31/configuring-ldap-for-fba-in-sharepoint-2010-or-sharepoint-2013-with-powershell.aspx
here is an example :
http://blogs.msdn.com/b/sharepoint__cloud/archive/2011/12/20/achieving-fba-with-adlds-amp-sharepoint-2010.aspx
if should this questions was at the ADSIEdit part, perhaps you can help us by opening a new thread at the AD foum
https://social.technet.microsoft.com/Forums/en-US/home?category=windowsserver
Regards,
Aries
Microsoft Online Community Support
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
Comparison Required for the large role with multiple profiles
Hello,
We are small SAP team of only several people. I have created a large functional role for our functional person. Everything was fine for a while, but now whenever I need to add/remove code from the role and push it over to production I get an unusable role (in red) and some type of "Comparison Required" message. I am not sure how to do this Comparison so I have to remove this role (and underlying profiles) from user than add it again to the user's profile. This fixes the issue of an unusable role, but raises auditing questions.
I tried to address the issue via transaction SUC but it seems I am not using it properly. Please, advise.
Thanks in advance
GalinaYes you should schedule it at least once a day, in my systems it's running around midnight.
Use transaction PFUD or schedule a background job with one of this reports:
PFCG_TIME_DEPENDENCY (this is the old report)
RHAUTUPD_NEW (this is the new version of report) <- I'm using this in R/3 4.7 and Netweaver 7.0
Short text
User Master Data Reconciliation
Description
This report runs the user master comparison for roles you have selected. For single roles you can also start the user master comparison in transaction PFCG.
You can either execute it with the single processing types in dialog mode or schedule it as a complete reconciliation in the background.
To run only specific processing types in the background, schedule a variant of program RHAUTUPD_NEW.
You can choose the following processing types:
Profile Comparison
/>: Start the profile comparison directly after the profiles have been generated or imported. Provided you are using time-dependent role assignments, we recommend you schedule daily background jobs. The authorization profiles will then be reconciled with the user master data. Profiles no longer current will be deleted from the user master records and the current profiles will be entered.
Composite Role Comparison : Start the composite role comparison, if you want to make changes to a composite role definition (that is, add to or delete single roles from a composite role) or if you want to import a change. Single role assignments will then be reconciled with the composite role assignments for the user. If you want to include single roles in the composite role, the single roles are assigned to those users who are assigned to the composite role. Conversely, the single roles assigned to users are deleted, if the single role is removed from the composite role.
HR Comparison : Start the HR comparison, if you want to make changes to the HR Org Model, which affect the indirect role assignment. You can only select this processing type, if HR Org is active. The switch HR_ORG_ACTIVE in table PRGN_CUST must be set to YES.
Cleanups: Carry out a cleanup, if you want to generate or import profiles. Generated profiles that do not have any roles are deleted.
Further options:
Issuing error messages: In dialog mode all error mesasges are displayed on the screen.
Replicating local HR assignments centrally (You can only select this option, if this client is an active child system of a CUA group and HR org. Role assignments in the child system that have arisen from links in the local HR Org model are replicated for information in the central system
Thanks,
Adrian -
The link to system requirements for Firefox 4 beta takes you to a page that gives you the requirements for Firefox 3.6 instead. I assume that the requirements for the beta are different as I can't seem to install the beta on my Macs. Where can I find the beta system requirements?
I never expected Mozilla to neglect the users of Apple's PowerPC (PPC) computers, while still supporting much older operating environments such as Windows XP. So, I should just throw away a $6,000 system, which is still fast and functional, and contribute masses of heavy metals to land-fills because…?
I'm hurt and confused after supporting Firefox for many years — installing and using it not only on my own computers but on most of my customers' computers. Now I have to tell my customers with PPC Macs they can't have a secure cross-platform browsing experience from Mozilla. They'll have to learn to use some other browser, or buy a new computer.
If one doesn't buy a new computer every year, one doesn't deserve Firefox 4. This is sort of sounding more like a Microsoft™© doctrine. (But wait, I can still have Firefox 4 on a ''SERIOUSLY CRAPPY WINDBLOWS XP pile of rubbish?!'') Please open your eyes Mozilla. This just doesn't make sense. -
When `ve downloaded the latest itunes and then i go to install it i get a message saying there is a problem with this windows installer package a program required for the install to complete could not be run, contact your support personnal or package vendor any ideas anyone ? thanks
Try the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows -
Hi All,
What are the ports required for the Audio, Video and A/V conferencing when the following clients are enabled for QoS in Lync 2013 server?
Client Type
Port range and Protocol required for Audio
Port range and Protocol required for
Video
Port range and Protocol required for
A/Vconferencing
Windows Desktop Client
Windows mobile App
Iphone
Ipad
Andriod phone
Andriod Tablet
MAC desktop client
Please advise. Many Thanks.Out of the box, 1024-65535 for all of the client ports. :)
https://technet.microsoft.com/en-us/library/gg398833.aspx
You'll want to tune your client ports a bit
https://technet.microsoft.com/en-us/library/jj204760.aspx as seen here, and then the client ports would use those ranges which is easier to set QoS markings. I'm not sure the mobile clients respect that setting.
Elan's got the best writeup for Windows clients here:
http://www.shudnow.net/2013/02/16/enabling-qos-for-lync-server-2013-and-various-clients-part-1/
However, the marking of the packets is the tricky part. Windows can do it via Group Policy, but for the other clients you'll need to have the network specifically prioritize ports regardless of DSCP markings. You have to do it based on ports
as the traffic could be peer to peer.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications
This forum post is based upon my personal experience and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
Requirements for the Interactive Graph -- Process Monitoring in WLI
Hi,
In my WLI console I m not able to bring the Graphical View for the Process Monitoring. My server is running on HP-UX -11, however I am able to view the graph from the workshop (windows desktop). Is there any server side requirement for the Graphical view?You have to run xvfb (X Window virtual frame buffer) on the HP-UX box. You have to download that from HP's website. Run it using root user only. Set the DISPLAY of your admin server to the xvfb and then you will be able to see the graphical view.
-
QC51:No certificate is required for the purchase order item
Dear all.
I want to create an certificate Receipt In the T-CODE QC51.After input the purchase order and item and press return,the SAP show an error message:
No certificate is required for the purchase order item.
Message no. QC508
My question was where to control the purchase order item to require certificate or not?
Regard
YodaHi
For this you have to maintain Certificate req in Material master.
MM01>Enter your material->Quality view-->Tick on QM procurement->Certificate require-Mension kind of certificate req.
like
E21 Cert. of conformity "2.1" EN 10204
E22 Test certif. "2.2" EN 10204
E23 Works test certif. "2.3" EN 10204
E31A Insp. certificate "3.1.A" EN 10204
E31B Insp. certificate "3.1.B" EN 10204
E31C Insp. certificate "3.1.C" EN 10204
E32 Inspection report "3.2" EN 10204
Q001 Conformance Report
Q002 Plating Certificate
Q003 Test Report
Q004 Certificate through Web
Q005 Chemical / Physical Test report + QC
etc.....
Customizing for this can be done in
SPRO->Quality Management->QM in Logistics--->Define Keys for Certificate Processing.
This will ask you during MIGO or during UD/confirmation possible thro' QC21
Regards
Sujit S Gujar -
Pre-requisites required for the local configuration of the Weblogic portal
Hi All,
I have got the code from the client. It is appenntly came to know that Code has been developed in Weblogic workshop.
When we build teh application we are getting the following web services related Errors:
ERROR: DESCRIPTION:An unexpected exception occurred while attempting to locate the run-time information for this Web Service. Error: java.lang.NullPointerException:null
WARNING: SUGGESTION:An unexpected error occurred. Please contact [email protected] for further assistance.
ERROR: ERROR
ERROR: DESCRIPTION:An unexpected exception occurred while attempting to locate the run-time information for this Web Service. Error: java.lang.NullPointerException:null
WARNING: SUGGESTION:An unexpected error occurred. Please contact [email protected] for further assistance.
ERROR: ERROR
ERROR: DESCRIPTION:An unexpected exception occurred while attempting to locate the run-time information for this Web Service. Error: java.lang.NullPointerException:null
WARNING: SUGGESTION:An unexpected error occurred. Please contact [email protected] for further assistance.
ERROR: ERROR
ERROR: DESCRIPTION:An unexpected exception occurred while attempting to locate the run-time information for this Web Service. Error: java.lang.NullPointerException:null
WARNING: SUGGESTION:An unexpected error occurred. Please contact [email protected] for further assistance.
ERROR: ERROR
ERROR: DESCRIPTION:An unexpected exception occurred while attempting to locate the run-time information for this Web Service. Error: java.lang.NullPointerException:null
WARNING: SUGGESTION:An unexpected error occurred. Please contact [email protected] for further assistance.
ERROR: ERROR
ERROR: DESCRIPTION:An unexpected exception occurred while attempting to locate the run-time information for this Web Service. Error: java.lang.NullPointerException:null
WARNING: SUGGESTION:An unexpected error occurred. Please contact [email protected] for further assistance.
PortaleWebApp: Created control beans for 19 controls in 12703 milliseconds
BUILD FAILED
ERROR: Build failed with 15 error(s).
When we deploy in the Portal weblogic server, Application is deploying with out any errors. But it is not showing any login page when I start the PTLoginMain.portal file.
As I am completly new to this Weblogic Portal server, Please let me know, Do i need to configure the any setting before starting the application. I mean to ask you that Pre-requisites required for the local configuration of the Weblogic portal Server.
Any Help would be much appriciated.
Regards & thanks,
Nirmala Vijaay Sekhar Varreand your server address can be resolved or not?
Are you accessing the server from Windows or Linux?
- On Linux try editing the /etc/hosts file and add something like: 10.241.110.105 server1.etcetera
- On Windows try editing the C:\WINDOWS\system32\drivers\etc\hosts file and add something like: 10.241.110.105 server1.etcetera
When this works, contact your system administrator and ask him or her to map an ip to your hostname in DNS and DHCP
such that the servername automatically resolves the ip-address -
WHY PGA IS REQUIRED FOR EVERY USER ?
Good Morning Everyone ;
I have a question about PGA.
WHY PGA IS REQUIRED FOR EVERY USER ?
What i got from google ..
Even though the parse information for SQL or PL/SQL may already be available in library cache of shared pool,
the value upon which the user want to execute the select or update statement cannot be shared.
I cant realize it Can anyone show clear example , if possible ?
DB Version is 10.2.0.4.0
OS : oracle linux 5.5
Thanks in advance ..Thanks aman and heok.
My Question :
Your explanation is clear. I think i am getting little bit confused.
Could you please clarify little more ?
>> session 1 :
user is HR
SQL>select * from tab1 ORDER BY name;
>> session 2 :
user is scott
SQL>select * from tab1 where ORDER BY name;
>> session 3 :
user is USER1
SQL>select * from TAB1 where ORDER BY name;
>> session 4 :
user is USER2
SQL>select * from TAB1 where ORDER BY name;
IS this right aman ?
Already sql statements are avail in SGA ,Even though all above users needs same information.
Oracle does sorting operation in PGA. If PGA exceeds , oracle will use temporary tablespace .
Thanks heok and aman.
Maybe you are looking for
-
Hi I am running oracle11g on enterprise linux 5 and everything seems to be ok. db and enterprise manager starts ok and works fine.I am just little confused when I check em startup logs that are full of errors and warnings. please see below. May I ign
-
How do I MOVE images WITHOUT COPYING, please?....
In Aperture 3.5.1 on Mac OS 10.9.1 and I have no accounts such as Flickr or Facebook listed in Aperture Account Preferences. Project A has no Albums and Project B has various Albums containing images which were directly imported from camera... I wish
-
Newest patch for call of duty 5 world at war..
Can anyone tell me when the newest patch for cod5 waw dd(1.6) will be available for download? thanks to any replies!!
-
I have just downloaded itunes. I cannot install QT as an older version is in place. Cannot remove the older version using CP. Any ideas?
-
Can't establish a USB connection
I have the Bionic. Before ICS I could transfer music and photos between PC and phone. Now I can't.I have followed every suggestion on the internet and am tech savvy: reinstall Motorola Device Manager, try other computers (I have tried three) debug