Help required: Hide buttons in popup

Dear All,
My requirement is to hide the choose and cancel buttons on the popup
that appears on using the FM POPUP_WITH_TABLE_DISPLAY.
Any clues?
Thanks.

you can hide fields dynamically in the PBO of the screen of the popup. (loop at screen.)
Since this is a standard FM, you should create your own withoud these buttons.
Or search the other popup function modules to find out if one exists where you can change the buttons
regards, Rob.

Similar Messages

How to hide button in fb60 by transaction variant.

Hi experters,
I want to hide button some buttons in transaction code: fb60 by transaction variant(SHD0)
transaction code: fb60, input some date,
and then click simulation button,
then go to the simulation screen,
I want to hide some button on this screen,
but I find it is impossible to hide it.
because when I click enter button, there is no response ,
there is no screen popup, so I cann't hide any field or button with transaction variant.
Please help me...
Regards,

Thanks .
I want to use transaction variant to hide that button,
I tried using transaction variant, I have created transaction variant on initial screen's variant of fb60,
but I found I can't recored that screen of simulation screen.
can any one have any idear??
Thanks.
Edited by: harry wang on Jan 7, 2009 5:43 AM

Refresh of report hides jQuery calendar popup anchors

In an attempt to build an interactive tabular form in Oracle Apex 4.0.2.00.07, we have based an interactive report on a query containing:
SELECT ...
     , apex_item.date_popup2( p_idx              => 11
                            , p_value            => to_char(..., 'DD.MM.YYYY')
                            , p_date_format      => 'DD.MM.YYYY'
                            , p_size             => 12
                            , p_maxlength        => 10
                            , p_attributes       => 'onchange="..."'
                            , p_item_id          => 'f11_' || to_char(deincno)      -- deincno = primary key column
                            , p_show_on          => 'both'
FROM   ...This renders perfectly. However, any interactive change in the report (filtering, sorting, hiding/showing columns, ...) will hide the calendar popup anchors, reducing the field to a normal text box. Only when the page is reloaded do the calendar popup anchors reappear.
Any help or advice on how to prevent these anchors from dissapearing would be greatly appreciated.

You need to rebuild the date pickers after the apexafterrefresh jquery event
If you look at your page source > scroll to the bottom and you will see some jquery code that builds date-pickers initially on the page load
(function(){apex.widget.datepicker("#f11_7369", { buttonImage: "/i/asfdcldr.gif", buttonImageOnly: true,"buttonText":"Calendar","showTime":false,"defaultDate":new Date(1980,11,17),"showOn":"button","showOtherMonths":false,"changeMonth":false,"changeYear":false}, "dd.mm.yy", "en-gb");})();You can look into your above code and find some of the contextual/dynamic parameters into the date-picker widget such as date format,image path etc...
You can use those values to add this code accordingly
Add this to your page header javascript
apex.jQuery('#apexir_WORKSHEET_REGION').bind("apexafterrefresh", function () {
     // loop through the actual f11 column
     jQuery.each($('input[name="f11"]'), function () {
          //rebuild the datepickers
          var vid = "#" + $(this).attr('id');
          (function () {
               apex.widget.datepicker(vid, {
                    buttonImage : "/i/asfdcldr.gif",
                    buttonImageOnly : true,
                    "buttonText" : "Calendar",
                    "showTime" : false,
                    "showOn" : "button",
                    "showOtherMonths" : false,
                    "changeMonth" : false,
                    "changeYear" : false
               }, "dd.mm.yy", "en-gb");
OR create a dynamic action with event after refresh and with action execute javascript
// loop through the actual f11 column
jQuery.each($('input[name="f11"]'), function () {
          //rebuild the datepickers
          var vid = "#" + $(this).attr('id');
          (function () {
               apex.widget.datepicker(vid, {
                    buttonImage : "/i/asfdcldr.gif",
                    buttonImageOnly : true,
                    "buttonText" : "Calendar",
                    "showTime" : false,
                    "showOn" : "button",
                    "showOtherMonths" : false,
                    "changeMonth" : false,
                    "changeYear" : false
               }, "dd.mm.yy", "en-gb");
});Edited by: VC on Jun 19, 2012 11:01 AM

Hide Button in Applications WD ABAP Travel Standard

Dear Experts.
Please Someone can help me with suggestions for the following issue that I have in this moment:
I need hide the button "Entrada Nueva" "New Entry" for the component[ fitv_vc_advances|http://img842.imageshack.us/img842/2719/fitvvcadvances.png]
I found that this is posible using the t.code FITVFELD_WEB that controls the input fields within the portal.
But I am checking and I don't find this with this t.code for hide this button.
Thanks in advance,
Regards
Carmen G

Hi,
are you using ESS in portal?
you can hide button through iView
choose iView form Content Management, then preview.
press "Ctrl" button (@ button you want to hide) combine with right click of your mouse, then you can set the button invisible.
hope it helps

CHM buttons are not localized in a French project (shows English Contents, Index, Search, Print, Hide buttons)

I opened an old WinHelp project into my new RoboHelp 7. When
I generate the CHM, even with the Project Settings in RoboHelp set
to French and running in a French Windows operating system (MS
Windows XP Pro 2002 SP 2), the CHM output is still in English. The
buttons display in English (Contents, Index, Search, Print, Hide
buttons). The title bar of the CHM also says "HTML
Help" even though the project title in the Project
Settings is "Aide en ligne...".
My Windows Regional Settings through the Control Panel -
Regional Options tab is set French (France). On the Languages tab I
under Text Services and Input Languages, Details button, I selected
French (France) French. On the Advanced tab I selected French. Then
I rebooted.
On the language bar on my Task pane, I selected FR. The CHM
still displays in English.
Please help! I have to produce 4 CHMS in languages other than
English today.
Thanks!

GinaL, would you be able to give us an update? Did the CHM
files look ok on a PC with a true French OS installed?
To avoid having to rewrite everything, I've written the
following info/instructions for my team -- though I'm not yet sure
they're 100% correct:
After I reported this issue to Adobe, they worked on the
problem for several days. They even sent me a new
HtmSingleSourceHtmlHelp.dll file that was supposed to solve the
problem. But it didn't work correctly. No matter what contortions
we put ourselves through, we couldn't get both of these items
correct in the CHM file at the same time, namely:
Index compiled in correct alphabetical order accdg to the
language of the help project.
Correctly translated help title showing in the caption,
regardless of the user's Windows regional settings. (For example,
we wanted "FORMS-Hilfe zu FORMS 5-3" to appear as the caption of
the German version of FORMS help, even if our regional settings
were set to English.)
I think we'd all agree that the index has to be in
alphabetical order. So from what I've seen, this is what we have to
do when compiling a non-English version of help using RH7:
1. Set up the project with the foreign name.
2. Set the language in the project settings. And in the
Project Settings dialog, click Advanced and check out the LNG File
tab to make sure it's using a translated version.
3. Ensure that the Window Caption setting is correct in each
window included in the project. (On RoboHelp's Project tab, open
the Windows folder, double-click each window in turn, and check the
settings.)
4. Set the Language setting in the HHP file to Language=[hex
value for that language]. I found a bunch of them listed on this
web page. Someone else might be able to find a better source:
https://svn.origo.ethz.ch/scoop/es_scoop_60/library/i18n/locale/nls/i18n_nls_lcid_tools.e
5. Change your Windows regional settings to the same language
as the help project. (Reboot if prompted.)
6. Recommended, for safety's sake: Delete the CPD file.
7. Open the project and compile using RH7.
8. Check the index's sort order -- is it in alphabetical
order according to the language of the project?
9. Check the help caption -- make sure it's not "HTML Help".
Note: Any customized buttons in your CHM should appear
correctly translated, but other buttons (Contents, Index, Search)
still appear in English -- at least they do on my PC, even though I
did step 2 above. We need to check whether those buttons appear
correctly when the PC is actually running a true foreign version of
Windows, and not just with temporarily adjusted Windows settings.
OR -- is anyone else able to get these to appear translated in the
CHM file?
Does anyone have anything to add? Other solutions? Easier
procedures? Better results to report?
Thank you
Eileen

Everytime I open a website apart from popular ones, firefox shows ads with open/hide buttons which are not served by the website actually. What to do?

if i could show you a screen shot.... that would have cleared the situation. ads show up in left bottom corner with open/hide button in a frame. and the same ads show up in every html plugin on the webpage especially in facebook social plugins. however on google, mozilla, facebook, twitter there comes no ad like this. Its very annoying. I recently uninstalled firefox for the same reason but nightly is having the same problem. and let me tell you there is no such thing in other browsers like chrome and i.explorer. I like firefox i dont want to change it but i will have to if the problem persisted. :( please help.

hello, can you try to replicate this behaviour when you launch firefox in safe mode once? if not, maybe an addon is interfering here...
[[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
please also run a full scan of your system with the security software that you have in place and different other tools like the [http://www.malwarebytes.org/products/malwarebytes_free free version of malwarebytes] & [http://www.bleepingcomputer.com/download/adwcleaner/ adwcleaner].
[[Troubleshoot Firefox issues caused by malware]]

Required Radio Button Colored Red in a Dynamic Form

Hi again
Okey, like the headline said, I've got some problems with required radio buttons right now. In static fields they have a border when they are required.
In dynamic forms they neither have, nor get any border.
I tried already:
1) to make a border with script (unfortunatelly it takes in the text too and is much smaller than the normal required border and will include the text => looks really ugly)
2) to paint a border with lines (unfortunatelly the box itself overlaps the border only for 0,02mm (couldn't fix it) and it looks damn ugly )
3) Cut the text out, write it in a textfield instead and border the complete box (Best solution right now... though a lot of work and won't look very good either)
Since I needed to change 25 of my forms to dynamic and all of them have some of those required radiobuttons in it, I would appreciate ANY solution that would look a little bit acceptable.
Anybody has any other idea how to get such a border (or anything similar) for these boxes?
Thanx already
Lisa
(PS.: I only use quadratic check-fields
PPS.: Sorry to bother you in the last time that much... I really try )

Sorry to say, but I think you got me a bit wrong.
It's not the radiobuttons that got in my way, it is the way they are displayed. (A field to enter information and a text. If you refer with a colour in it and it is in a dynamic form both, the input part and the text will be highlighted.)
I wanted to accomplish the following thing:
Make some kind of radiobutton or checkboxfield where only the little input part is red highlighted (with a border or something).
But neither in radiobuttons nor in checkboxes it works, does it?
Therefor it is no use in using checkboxes I think. If I do wrap those into subforms and highlight those again, not only the input part will be highlighted but also the following text. (That's why I don't understand how subforms could be of any use )
Right now I seperated the input part from the text and just highlighted the input field. Though it still doesn't look as good as I would like it to do.
If I got you wrong plz say so I am a bit tired right now and my English gets worse ;D
I'll have a closer look at those pages you suggested me on tuesday. (I'm a bit in trouble right now)
Thanx for providing me with information though
I'm allways greatfull to learn some new things ;D
(Silly people (like me) just can't learn enough so they could hide how dump they are ;D )
Byebye
Lisa

F1 help for radio buttons

Hello All,
   I am getting F1 help when the radio buttons are in display mode but i am not getting F1 help when the buttons are in input mode. what cud be the problem?
can anyone please help me. required urgerntly
Thanks & Regards
Amarender Reddy B

Hi,
    use event
   at selection-screen on HELP-REQUEST FOR
   rb_radio
As with the addition ON VALUE-REQUEST the field psel_low_high
is either the name of a report parameter or of the form sel-LOW
or sel-HIGH, where sel is the name of a selection criterion.
When the user presses F1 on the relevant field, the subsequent
processing block is executed. You can thus implement a
self-programmed help for the input/output fields of the
selection screen. If the program contains such an event and the
user presses F1, the system processes this rather than
displaying the documentation of the Dictionary field - even if
the report parameter or the selection option with LIKE or FOR
points to a Dictionary field.
Regards
amole

Hide buttons when movie loads and then show

I have a movie that loads another video. When it goes to
video by hitting button
I can hide buttons underneath.
When I unload the movie, I need the buttons to show up again
and clickable.
I added the onEnterFrame, but makes no difference.
Can someone help as to how I can bring the buttons back when
movie that was loaded is unloaded?
Thank you in advance.

> onEnterFrame(_root.VideoBtn.enabled._visible = true);
Where did you find that syntax? It's incorrect, check the
docs..
However, I don't why you would do that, all that will do is
make sure it's never invisible.
To make the visible again, you do the same thing you did to
make them invisible -- you set the _visible property to true,
wherever you are unloading the movie.

GS_CM. How to hide buttons: 'Attachment' and 'URL'

Hi,
Business object 'catalog product' use component GS_CM
We want to hide buttons: Attachment and URL
We need to use only button Advanced.
How I can customize it?
Denis.

Dear Denis,
Enhance Component GS_CM and view DocList.
Redefine method IF_BSP_WD_TOOLBAR_CALLBACK~GET_BUTTONS and implement the following code:
super->IF_BSP_WD_TOOLBAR_CALLBACK~GET_BUTTONS( ).
delete gt_button where id ne 'advanced'.
Hope this helps.
Thanks
Vishal
Edited by: Vishal Kesar on Aug 9, 2011 2:07 PM

HIde button on events

Hi,
Can some body elaborate how to hide buttons on events.
Regards
Sameer

Hi,
You can use PPR.
Step 1. create a VO which contains one transient attribute of type boolean
Step 2. Base button rendered property using SPEL
Step 3. Initialize your VO for PPR(inintialization includes insertion of one row and set the attribute as True)
Step 4. In the event handler where you want to hide button just set it false.
Sample code:
//Code to hide button
public void handlePoApproveChangeEvent()
// Get the special, single-row application properties and make the first
// (only) row current.
OAViewObject vo = (OAViewObject)findViewObject("SampleBrowserPVO1");
OARow row = (OARow)vo.first();
// Get the value of the view object attribute with the PO Approval
// status.
OAViewObject poVO = (OAViewObject)findViewObject("PurchaseOrderHeadersVO1");
OARow poRow = (OARow)poVO.getCurrentRow();
String status = (String)poRow.getAttribute("StatusCode");
// Set the application property values based on the PO Approval
// status value.
if ("APPROVED".equals(status))
row.setAttribute("HideButton", Boolean.FLASE);
//Code to initialize VO
public void initializePPRExamplePage()
// Create purchase order header
OAViewObject appPropsVO =
(OAViewObject)findViewObject("SampleBrowserPVO1");
if (appPropsVO != null)
// If the VO already has a row, skip its initialization. Note that
// calling getFetchedRowCount() won't perform a DB hit on a VO with
// no SELECT and only transient attributes.
if (appPropsVO.getFetchedRowCount() == 0)
// Setting the match fetch size to 0 for an in-memory VO
// prevents it from trying to query rows.
// Calling executeQuery() is a small workaround to a known
// BC4J issue that ensures that modified rows in this
// transient view object are not lost after commit. See
// View Objects in Detail for additional information about
// both of these calls.
appPropsVO.setMaxFetchSize(0);
appPropsVO.executeQuery();
// You must create and insert a row in the VO before you can start
// setting properties.
Row row = appProposVO.createRow();
appPropsVO.insertRow(row);
// Set the primary key value for this single-row VO.
row = (OARow)appPropsVO.first();
row.setAttribute("RowKey", new Number(1));
row.setAttribute("HideButton",Boolean.TRUE);
// Initialize the application properties VO (and the UI) based on the
// default PO approval value set on the underlying object.
handlePoApproveChangeEvent();
else
// throw exception
} // end initializePPRExamplePage()
SPEL Parameter:
${oa.myVOName.HideButton}
Hope this help, Please refer JDeveloper guide for Topic Dynamic User Interface.
Regards,
Reetesh Sharma

Little bit of help[ with a button.

Good day all!
I need help making a button. This is what I want to happen.
I have a bunch of text, One of the words "merino" is bule as
to say there is a link hear! And I want an image of the "merino" to
come up, like a "ALT" box. Or have an image in the "ALT" box?
I know how to do this in "Flash" i.e just drop in the image
on the over state of the button event. Easy as pie! This is why I
cant get to grips with Dreamweaver! I hate it!
But I am willing to learn and maybe in time love???
Thanks all!

"satrop" <[email protected]> wrote in
message
news:f0o4t7$954$[email protected]..
> Good day all!
>
> I need help making a button. This is what I want to
happen.
>
> I have a bunch of text, One of the words "merino" is
bule as to say there
> is a
> link hear! And I want an image of the "merino" to come
up, like a "ALT"
> box.
>
> I know how to do this in "Flash" i.e just drop in the
image on the over
> state
> of the button event. Easy as pie! This is why I cant get
to grips with
> Dreamweaver! I hate it!
>
> But I am willing to learn and maybe in time love???
HTML is a lot different from Flash! :-)
I believe you could do this using DW's Show-Hide layer
behavior - have
mousing over the link trigger a layer with the image to
appear. Someone else
may have a better idea.
Just FYI, having to mouse over a link in order to get more
information about
it isn't usually appreciated by users. You *might* want to
re-think this
plan..
Patty Ayers | Adobe Community Expert
www.WebDevBiz.com
Free Articles on the Business of Web Development
Web Design Contract, Estimate Request Form, Estimate
Worksheet

Help With Radio Buttons -- URGENT!!

Hi i am new to using UI compents in flash.
Basically i havnt a clue where to start.
Just some simple action script will help and be much
appreciated if someone can give me it.
Basically i have a question to ask which requires radio
buttons to answer the question.
I have a question and the answers are A, B, C, D.
I want:
A to equal 1
B to equal 2
C to equal 3
D to equal 4
E to equal 5
Would someone be able to tell me how to set up the radio
button so that the value of the radio button is stored into an
array called SCORE.
i dont need a tutor for arrays, i can do them, i just need
help with the radio buttons so a reference to an array would be
enough, eg how to store the answer from the radio button in an
array.
Thank you

Place the radio buttons on the stage and set their parameters
to what you need. Make sure that for each group of radio buttons
you give them the same group name. Then you could use something
like this:
var listenerObject:Object = new Object();
var answerArr:Array = new Array();
listenerObject.click = function(eventObj:Object) {
answerArr.push(eventObj.target.selectedData);
trace(answerArr);
radioGroup.addEventListener("click", listenerObject);
radioGroup refers to the group name for the buttons.
eventObj.target will refer to the actual radio button
clicked.
Tim

Interactive PDF show/hide button not working properly

I could use some help. I'm creating an interactive pdf using show hide buttons. A button is set to hidden and a second button controls it's visible on mouse enter and mouse exit. Sometimes these buttons which are set to visible turn to invisible in the general/form field propery window and stop working. I've tried replacing the buttons with new ones, but this hasn't helped. Is this a bug or do you think the document is corrupt. This is a large prototype file which has to be shown to a client and rebuilding it is not a welcome thought.
Is there a way to program this using java to create this function? (I'm a Java novice.)
Thanks

HI PAUL, WE HAVE HAD THE SAME PROBLEM. SO, IF YOUR USING INDESIGN CS2 OR 3 WE HAVE FOUND THAT BY MAKING A NEW BUTTON WITH ALL THE ACTIONS YOU WANT IN A NEW DOCUMENT ON THE MASTER PAGE AND THEN COPYING AND PASTING THE NEW BUTTON INTO YOUR ORIGINAL FILE ONTO THE PAGE MASTER THIS USUALLY SOLVES THE PROBLEM.

Hide button glitch in Mail App: iPhone 5

Hi guys!
I have a problem with my mail app. When I click the 'Hide' button in an email, only the 'From:' part of the sender line is hidden! Can I fix this? I think clicking the hide button SHOULD hide the recipients of the email in the header.
I have iOS 8 by the way.
HELP PLEASE!!!
Thanks

@Meg St._Clair : Hope this link could explain the issue http://www.youtube.com/watch?v=5rtBEqJFV3g
@ Roshanalex : I did a restore, but still the issue persists. May I know whether you too had a same problem
Thanks.

Help required: Hide buttons in popup

Similar Messages

Maybe you are looking for