Help required in nzload command

I am using LKM_File to Netezza(Nzload) to load the data to netezza database.
But I am facing problem at nzload level which is as follows:---
"Welcome to my world" ---No problem.data goes to mapped target column.
"Welcome to
my world" ---Problem occurs.Nzload creates log file which says 2 bad records found.
It says first line expects " in place of new-line feed
Second Line expects " in start of line..
How to ignore the new line-feed through nzload syntax modification..

The JCShell upload command includes two consecutive GlobalPlatform APDU commands: INSTALL [for load] and following multiple LOAD commands. It shall be seen as a fixed sequence. The LOAD command contains parts of the CAP file. The component order is defined in the Java Card Virtual Machine Specification, as well as the CAP structure itself. So what you see in the second command is the LOAD command, and the first component to be loaded (see JCVM 2.2.1/2).
Encryption according to SCP02 (C_ENC + C_MAC) is specified in eg GP2.1.1, Appendix E SCP02. You will find there the algorithm.

Similar Messages

Urgent help required: Query regarding LC Variables

Hi All
Sometime earlier I was working on a performance issue raised by a customer. It was shell script that was taking almost 8-9 hrs to complete. During my research I came across a fact that there were some variables which were not set, the LC variables were impacting the sort funnel operations because of which the script was taking a long time to execute.
I asked them to export the following commands, after which the program went on smoothly and finished in a couple of mins:
export LC_COLLATE=en_US.ISO8859-1
export LC_MESSAGES=C
export LC_MONETARY=en_US.ISO8859-1
export LC_MONETARY=en_US.ISO8859-1
export HZ=100
export LC_CTYPE=en_US.ISO8859-1
export LANG=en_US.UTF-8
Later I did recover that setting the LC_COLLATE to C, is not helping and the program was again taking a lot of time. Few questions that I want to ask are:
1. Can someone please tell me, what each of these variable mean and how these values make a difference.
2. When I exported LC_COLLATE=en_US.ISO8859-1, it worked fine, but when i tried with the defalut value LC_COLLATE=C, then why the program didnt work.
As this issue is still going on, hence I would request All to provide their valuable inputs and let me know as much as possible.
Appreciate your help in this regard.
Thanks
Amit
Hi All
A new development in this regard. The customer has send us a screen shot in which they were trying to export the locale variable using the commands which I have pasted above. I can see in the screen shot that while exporting LC_COLLATE and LC_TYPE, they get a message that ""ksh: export: couldn't set locale correctly"".
Request everyone to please give their inputs as it's a bit urgent.
Thanks for all the help in advance.
Thanks
Amit
Some help required please...
Edited by: amitsinhaengg on Jul 22, 2009 2:03 AM
Edited by: amitsinhaengg on Jul 22, 2009 2:06 AM

LC_CTYPE
Controls the behavior of character handling functions.
LC_TIME
Specifies date and time formats, including month names, days of the week, and common full and abbreviated representations.
LC_MONETARY
Specifies monetary formats, including the currency symbol for the locale, thousands separator, sign position, the number of fractional digits, and so forth.
LC_NUMERIC
Specifies the decimal delimiter (or radix character), the thousands separator, and the grouping.
LC_COLLATE
Specifies a collation order and regular expression definition for the locale.
LC_MESSAGES
Specifies the language in which the localized messages are written, and affirmative and negative responses of the locale (yes and no strings and expressions).
You can use command
# locale -k LC_CTYPE
to see more detail about each type.

Help needed with DATAEXPORT command

Hello,
I'm looking for some help with the DATAEXPORT command. It was working for us previously and recently it started giving us problems. Now when I run a DATAEXPORT within a calcscript in order to get a subset of the data, the exported file contains 13, sometimes 14 data columns rather than 12 data columns (one for each month)
When I perfom a full data export the export file is perfect (select the database, right click and select “Export”, enter file path and name, select ‘Level 0 data blocks” and “Export in column format” and click ok.)
Here's the Calc script that I'm using:
//ESS_LOCALE English_UnitedStates.Latin1@Binary
SET CALCPARALLEL 3;
SET DATAEXPORTOPTIONS
DataExportLevel LEVEL0;
DataExportDynamicCalc OFF;
DataExportColFormat ON;
DataExportDimHeader ON;
DataExportOverwriteFile ON;
FIX(
@Relative("Clients",0),
@Relative("TOTLOC",0),
@Relative("LOB",0),
@Relative("Project",0),
@Relative("Entities",0),
@Relative("Dept",0),
"USD",
"SCN_Actual",
"SCN_Plan",
"Ver_Final",
@Relative("ACC_GAAPPL",0),
@Relative("ACC_MGMTPL",0),
"FY08",
Jan:Dec
DATAEXPORT "File" "!" "X:\Hyperion_Share\Hyperion_PRD\Planning\exp_rpts_test3.txt" "#MI" ;
ENDFIX
I'm hoping someone has seen this before and suggest a solution.
Thanks,
Chris

Hi Chris
I noticed something similar when I first tested the DATAEXPORT calc script command but couldn't get to the bottom of the cause.
It seemed to be an issue where the first month(s) were #Mi but later months had data, e.g. Jan:Mar = #Mi, Apr = 10, May = 20 etc.
After a certain point in the export file data didn't align correctly when compared to the export in column format as you mention, in fact a number of rows that should have had data returned nothing and some rows existed where there was no corresponding data in the database. I remember noticing that I never had more than 13 data columns. This happened to correspond to the number of level0 time periods I had (I had 'BegBalance' as well as Jan:Dec).
I did a test on exporting all level0 time periods, forcing it to have 13 columns one for each level0 time period and it worked and matched the export in column format.
Fortunately for me the client changed the requirement and only wanted the total for the year exported so I never quite got to the bottom of it but hope that it helps you.
Stuart Game
www.analitica.co.uk

URGENT :Photo Upload automation : help required

Hi Experts,
I need your help in my program which require executing DOS command from SAP ECC 6.0.
The requirement is "to make an automated SAP program workable with ECC 6.0 which will able to execute DOS command Dir *.jpg -> photo.txt to create a File Photo.txt, Then I need to upload this file automatically into SAP Internal table for further processing" that will lead to photo upload (this part is already done by me).
I am not sure if someone has done some similar things in past if yes kindly guide how to do this.
best Regards,
Rahul
null

Hi Rahul
Firstly you need to create an archive to store the pictures. Then
Goto SM30 or SM31.
Enter the Table/view name as TOAAR_C.
Click on New Entries.
Give StSym as 'A2'.
Give a description ..
In Arch. Path enter as /.
Select the radio button 'File store'.
Save the entry.
You can view the photo through PA20/PA30/PA40 for each employee.
For this you have to add an entry in Table T588J for your header
modification.
The field type of this entry should be 'PIC'.
Then you have to run the report RPHDYNPG for generating the screen
header.
After the initial configuration as described above,
for uploading the Photo
Go to Tcode OAAD -> Create
Business Object : PREL
Document Type : HRICOLFOTO
Click on Create.
System will ask for personnel no and path of Photo
If you need detailed step by step procedure, do let us know. If you need a useful code to carry out this, do let me know with your email ID

Java Mail,SMTP server not starting,help required urgently

Hi i have been working on java mail .Yesterday it was working ok but today suddenely i am getting this thing.its not starting the smtp server i guess,just exiting and get the command prompt ..dont know what to do.help required how to go about this error
am pasting the debug information.please check and let me know
the compilation ,smtp server and others are all valid
thanks
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\Pavan>cd C:\Program Files\Java\jdk1.5.0_07\bin
C:\Program Files\Java\jdk1.5.0_07\bin>javac jdbcExample3.java
C:\Program Files\Java\jdk1.5.0_07\bin>java jdbcExample3 smtpserver address
DEBUG: JavaMail version 1.4ea
DEBUG: java.io.FileNotFoundException: C:\Program Files\Java\jdk1.5.0_07\jre\lib\
javamail.providers (The system cannot find the file specified)
DEBUG: !anyLoaded
DEBUG: not loading resource: /META-INF/javamail.providers
DEBUG: successfully loaded resource: /META-INF/javamail.default.providers
DEBUG: Tables of loaded providers
DEBUG: Providers Listed By Class Name: {com.sun.mail.smtp.SMTPSSLTransport=javax
.mail.Provider[TRANSPORT,smtps,com.sun.mail.smtp.SMTPSSLTransport,Sun Microsyste
ms, Inc], com.sun.mail.smtp.SMTPTransport=javax.mail.Provider[TRANSPORT,smtp,com
.sun.mail.smtp.SMTPTransport,Sun Microsystems, Inc], com.sun.mail.imap.IMAPSSLSt
ore=javax.mail.Provider[STORE,imaps,com.sun.mail.imap.IMAPSSLStore,Sun Microsyst
ems, Inc], com.sun.mail.pop3.POP3SSLStore=javax.mail.Provider[STORE,pop3s,com.su
n.mail.pop3.POP3SSLStore,Sun Microsystems, Inc], com.sun.mail.imap.IMAPStore=jav
ax.mail.Provider[STORE,imap,com.sun.mail.imap.IMAPStore,Sun Microsystems, Inc],
com.sun.mail.pop3.POP3Store=javax.mail.Provider[STORE,pop3,com.sun.mail.pop3.POP
3Store,Sun Microsystems, Inc]}
DEBUG: Providers Listed By Protocol: {imaps=javax.mail.Provider[STORE,imaps,com.
sun.mail.imap.IMAPSSLStore,Sun Microsystems, Inc], imap=javax.mail.Provider[STOR
E,imap,com.sun.mail.imap.IMAPStore,Sun Microsystems, Inc], smtps=javax.mail.Prov
ider[TRANSPORT,smtps,com.sun.mail.smtp.SMTPSSLTransport,Sun Microsystems, Inc],
pop3=javax.mail.Provider[STORE,pop3,com.sun.mail.pop3.POP3Store,Sun Microsystems
, Inc], pop3s=javax.mail.Provider[STORE,pop3s,com.sun.mail.pop3.POP3SSLStore,Sun
Microsystems, Inc], smtp=javax.mail.Provider[TRANSPORT,smtp,com.sun.mail.smtp.S
MTPTransport,Sun Microsystems, Inc]}
DEBUG: successfully loaded resource: /META-INF/javamail.default.address.map
DEBUG: !anyLoaded
DEBUG: not loading resource: /META-INF/javamail.address.map
DEBUG: java.io.FileNotFoundException: C:\Program Files\Java\jdk1.5.0_07\jre\lib\
javamail.address.map (The system cannot find the file specified)
C:\Program Files\Java\jdk1.5.0_07\bin>

The debug output doesn't show an obvious problem. You're
going to have to actually debug your program. A debugger
might be helpful.

XSLT mapping Help Required.

XSLT mapping Help Required.
Hi Experts,
I am New to XSLT Mapping. I am practising the below Example:
InputXML File:
<?xml version="1.0" encoding="UTF-8"?>
<?xml-stylesheet type="text/xsl" href="Persons111.xsl"?>
<ns0:MT_XSLT_Source xmlns:ns0="http://XYZ.com/gen">
<Person>
<FirstName>Anshul</FirstName>
<LastName>Chowdhary</LastName>
<Gender>Male</Gender>
<Address>
<Street>2nd Main</Street>
<Houseno>83/b</Houseno>
<City>Mysore</City>
</Address> </Person>
</ns0:MT_XSLT_Source>
XSL StyleSheet File:
<?xml version='1.0' encoding="UTF-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:ns0="http://XYZ.com/Gen"
Xmlns:ns1=”http://XYZ.com/Test”>
<xsl:template match="/">
<ns1:MT_XSLT_Target>
<Title> <xsl:value-of select="ns0:MT_XSLT_Source/Person/Gender"/> </Title>
<Name> <xsl:value-of select="concat(concat(ns0:MT_XSLT_Source/Person/FirstName,' '), ns0:MT_XSLT_Source/Person/LastName)"/>
</Name>
<Street> <xsl:value-of select="concat(concat(ns0:Mt_XSLT_Source/Person/Address/Houseno,' '),
ns0:Mt_XSLT_Source/Person/Address/Street)"/> </Street>
<City> <xsl:value-of select="ns0:Mt_XSLT_Source/Person/Address/City"/> </City>
</ns1:MT_XSLT_Target>
</xsl:template>
</xsl:stylesheet>
The Desired Output shuold be:
<?xml version="1.0" encoding="UTF-8"?>
<ns1:MT_XSLT_Target xmlns:ns1="http://XYZ.com/Test">
<Title>Male</Title>
<Name>Anshul Chowdhary</Name>
<Street>83/b 2nd Main</Street>
<City>Mysore</City>
</ns1:MT_XSLT_Target>
I have refered the xsl in xml and i am getting the below Oupt in a Single line like this:
Anshul Chowdhary Male 2nd Main 83/b Mysore
I am Unable to display in Target XML Fomrat as shown above. Please check and do the needful.
Regards,
GIRIDHAR

Hi,
I have used below for testing.
Input xml:
<?xml version="1.0" encoding="UTF-8"?>
<?xml-stylesheet type="text/xsl" href="Persons111.xsl"?>
<ns0:MT_XSLT_Source xmlns:ns0="http://XYZ.com/gen">
<Person>
<FirstName>Anshul</FirstName>
<LastName>Chowdhary</LastName>
<Gender>Male</Gender>
<Address>
<Street>2nd Main</Street>
<Houseno>83/b</Houseno>
<City>Mysore</City>
</Address> </Person>
</ns0:MT_XSLT_Source>
xsl code:
<?xml version='1.0' encoding="UTF-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:ns0="http://XYZ.com/gen"
    xmlns:ns1="http://XYZ.com/Test">
    <xsl:output method="xml" version="1.0" encoding="UTF-8" indent="yes"/>
    <xsl:template match="/">
        <ns1:MT_XSLT_Target>
            <Title> <xsl:value-of select="ns0:MT_XSLT_Source/Person/Gender"/> </Title>
            <Name> <xsl:value-of select="concat(concat(ns0:MT_XSLT_Source/Person/FirstName,' '), ns0:MT_XSLT_Source/Person/LastName)"/>
            </Name>
            <Street> <xsl:value-of select="concat(concat(/ns0:MT_XSLT_Source/Person/Address/Houseno,' '),
                /ns0:MT_XSLT_Source/Person/Address/Street)"/> </Street>
            <City> <xsl:value-of select="/ns0:MT_XSLT_Source/Person/Address/City"/> </City>
        </ns1:MT_XSLT_Target>
    </xsl:template>
</xsl:stylesheet>
For testing in PI ,change the extension from .txt to .xsl and zip it and upload into PI as an imported archive .
Regards
Venkat

Help required - Sales order item is partially delivered but the item grayed

I have a sales order 123 having say item10 with qty 1, item20 with qty 10 , item 30 qty 12
Item 1 confirmed qty 1 and delivered qty is 1
Item 2 confirmed qty 10 and delivered qty 10
Item 3 confirmed qty 1 and delivered qty is 1
Now the item3 still has open requirements of 11 to be delivered. But the item is GRAYED OUT already.
even if I do ATP the qty is not confirming for the remaining 11 pieces.
Why is that? How to make that item out from GRAY.
How to confirm the remaining 11 qty for that item.
Help required as early as possible.
Appreciate ur help guys
Radha

hi Radha, how are you ?
     ---the partial deliveries in master data must have not been mentioned.
     ---the deliveries should be upto target quantity.
     ---check order type, item category and schedule line category.
     ---check unrestricted stock availability.
thank you
regards
Khera.

Search Help with in a serach help required in SRM 4.0

Hi,
Requirement: Search help required for Product Category field in the Search help for Product(BBPH_PRODUCT) in SRM portal.
This search help is used in Create shopping Cart transaction. The hyper link on Internal Goods/Services leads to the search help BBPH_PRODUCT.
My analysis:
The field Product Category (CATEGORY_ID) has search help(COM_CAT_HIER) attached to its data element. When I single test the search help BBPH_PRODUCT in SAP GUI,I can see the search help for field product category in the selection dialogue box. However the same does not appear on the corresponding screen in HTML.
Please let me know whether I need to do some thing to make the search help appear on the HTML screen?
With Regards,
Prakash Kamath

Hi Prakash,
I have the same problem but with another field. Unloading point. Could you please tell me how did you solve this problem with displaying F4 help on html/ SRM portal?
Thank you very much.
Best regards,
Danijela ZIvanovic

Help required with Photoshop Elements 4.0 this has been installed on my new Toshiba laptop with windows 8.1 for some 18 months and operating well. Now it will not open, message pops up saying "attempt to access invalid address" then "application not respo

Help required with Photoshop Elements 4.0 this has been installed on my new Toshiba laptop with windows 8.1 for some 18 months and operating well. Now it will not open, message pops up saying “attempt to access invalid address” then “application not responding” Suggestions how to access would be much appreciated. Tks. Stuart

What is the size of your hard disk? PSE 4 is a very old program and I suspect it is not able to access the entire hard disk on your machine. Just a thought here.

Help require with installing Adobe Acrobat onto my Macbook Pro Retina.

Help require with installing Adobe Acrobat onto my Macbook Pro Retina.
I have successfully installed all of my creative cloud apps with the exception being acrobat.
I cannot print from Indesign to PDF.
I have unistalled, reinstalled and still no Adobe Acrobat.
I now have to go back to Windows 8 and create the PDF's there.
Any one know how to get around this issue?
Thanks in advance
Kelvin

OSX has effectively killed the ability to print to pdf, (print to pdf eliminates most of the "Rich features" of current pdf).
Export from InDesign, always, excpet for the 1% of the time where you know why print to pdf would produce a better result.

Help required in Weblogic 6 - Creation & Configuration of Web Application

Forum Home > Enterprise JavaBeans[tm]
Topic: Help required in Weblogic 6 - Creation & Configuration of Web Application
Duke Dollars
2 Duke Dollars assigned to this topic. Reward the best responses to your question
using the icons below, or transfer additional Duke Dollars to this topic.
Welcome moinshariff!
Watching this topic.
Previous Topic Next Topic
This topic has 1 reply on 1 page (Most recent message: Jan 23, 2002 1:05 AM)
Author: moinshariff Jan 22, 2002 4:55 AM
Hi,
I am using Weblogic 6. I have created a new Web
Application called Web (I have not used the DefaultWebApp_myserver).
And I have the following settings:
Name : Web
URI : Web
and Path : C:\Web
and placed my JSP files under c:\Web\
I am able to access the first page, but after that I am not able to access the
second page.
I get "Error 404--Not Found" on the browser. Basically the class file is not getting
created under /Web-inf/_tmp_war_myserver_myserver_Web/jsp_servlet/ folder .
I tried a work around for this. I copied all my files under one more folder called
web and placed this under C:\Web
The it works. Now I have 2 copied off all the files, 1 copy under c:\web and another
copy under c:\web\web\.
If I have the files under DefaultWebApp_myserver and have the setting as
Name: DefaultWebApp_myserver
URI: DefaultWebApp_myserver
Path: .\config\mydomain\applications
everything works fine.
Can any one please let me know if there is any configuration which has to be done
so that I do not duplicate the code in 2 directories
Thanks in advance.
Regards,
Moin

Forum Home > Enterprise JavaBeans[tm]
Topic: Help required in Weblogic 6 - Creation & Configuration of Web Application
Duke Dollars
2 Duke Dollars assigned to this topic. Reward the best responses to your question
using the icons below, or transfer additional Duke Dollars to this topic.
Welcome moinshariff!
Watching this topic.
Previous Topic Next Topic
This topic has 1 reply on 1 page (Most recent message: Jan 23, 2002 1:05 AM)
Author: moinshariff Jan 22, 2002 4:55 AM
Hi,
I am using Weblogic 6. I have created a new Web
Application called Web (I have not used the DefaultWebApp_myserver).
And I have the following settings:
Name : Web
URI : Web
and Path : C:\Web
and placed my JSP files under c:\Web\
I am able to access the first page, but after that I am not able to access the
second page.
I get "Error 404--Not Found" on the browser. Basically the class file is not getting
created under /Web-inf/_tmp_war_myserver_myserver_Web/jsp_servlet/ folder .
I tried a work around for this. I copied all my files under one more folder called
web and placed this under C:\Web
The it works. Now I have 2 copied off all the files, 1 copy under c:\web and another
copy under c:\web\web\.
If I have the files under DefaultWebApp_myserver and have the setting as
Name: DefaultWebApp_myserver
URI: DefaultWebApp_myserver
Path: .\config\mydomain\applications
everything works fine.
Can any one please let me know if there is any configuration which has to be done
so that I do not duplicate the code in 2 directories
Thanks in advance.
Regards,
Moin

Help required network configuration - Gateway route settings get erased on reboot.

Oracle Linux 7
Linux myhostname 3.8.13-35.3.1.el7uek.x86_64 #2 SMP Wed Jun 25 15:27:43 PDT 2014 x86_64 x86_64 x86_64 GNU/Linux
#cat /etc/sysconfig/network-scripts/ifcfg-eno16780032
TYPE="Ethernet"
BOOTPROTO="none"
DEFROUTE="yes"
IPV4_FAILURE_FATAL="no"
IPV6INIT="yes"
IPV6_AUTOCONF="yes"
IPV6_DEFROUTE="yes"
IPV6_FAILURE_FATAL="no"
NAME="eno16780032"
UUID="2d1107e3-8bd9-49b1-b726-701c56dc368b"
ONBOOT="yes"
IPADDR0="34.36.140.86"
PREFIX0="22"
GATEWAY0="34.36.143.254"
DNS1="34.36.132.1"
DNS2="34.34.132.1"
DOMAIN="corp.halliburton.com"
HWADDR="00:50:56:AC:3F:F9"
IPV6_PEERDNS="yes"
IPV6_PEERROUTES="yes"
NM_CONTROLLED="no"
#route -n
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
0.0.0.0         34.36.143.254   0.0.0.0         UG    0      0        0 eno16780032
34.36.140.0     0.0.0.0         255.255.252.0   U     0      0        0 eno16780032
169.254.0.0     0.0.0.0         255.255.0.0     U     1002   0        0 eno16780032
When I reboot the machine, the first line in route table gets erased, I then run:
#route add default gw 34.36.143.254
After which network works fine.
Help required. I don't want to use NetworkManager.

The following might be useful:
https://access.redhat.com/solutions/783533
"When transitioning from NetworkManager to using the network initscript, the default gateway parameter in the interface's ifcfg file will be depicted as 'GATEWAY0'. In order for the ifcfg file to be compatible with the network initscript, this parameter must be renamed to 'GATEWAY'. This limitation will be addressed in an upcoming release of RHEL7."
NetworkManager is now the default mechanism for RHEL 7. Personally I don't quite understand this, because as far as I can gather it is a program for systems to automatically detect and connect to known networks. I think such functionality can be useful when switching between wireless and wired networks, but for a server platform, I wonder.

Help Required - Oracle AS 10g

hello,
i have just downloaded oracle 10g softwares ...
i installed database then developer suite ... everything was fine ... until i was unable to run forms ...
a friend of mine told me that i need to install application server in order to run forms ...
1st of all i want to know that is there any way i can run forms without using Oracle AS 10g ...
2ndly i m facing problems in installation of Oracle AS 10g ...
i have studied online documentation but it ain't so helpfull for me ...
it seems like ... i have to install "Oracle AS infrastructure" first and then "Middle-tier: Business Intelligence and forms" ...
i m using P-IV (AMD Athlon XP 2100+, MMX, 1.7GHz Processor) with 512 MB DD RAM and Windows XP Professional with Service Pack 2 as Operating System.
During installation, the installer is warning dat only "Oracle Application Server (J2EE and Web Cache)" and "Oracle Application Server Developer Kits" are supported installations on dis platform ...
what should i do ... urgent help required ...
regards,
yasir ([email protected])

@ brusardl and rkogelhe
thanx for replying ...
brusardl
i didn't changed da port while installing Oracle AS ...
inspite i stopped all services using/listening from dat port ...
now ... i guess there has been some conflict ... as database listner stops automatically just after starting !!!
rkogelhe
can u plz tell me what is BI version of Forms ...
and can i view forms running on web without installing Oracle AS with OC4J bundled in Forms ???
Another Problem:
I re-installed Database, Developer suite and then Oracle AS infrastructure ...
everthing went fine ...
when i installed Oracle AS Middle Tier - Business Intelligence & Forms
during installation ... some configuration assistants failed/skipped ...
da OC4J configration assistant at 5th last position failed ... so remaining 4 configuration assistants were skipped ...
at da end it said ... Installation Succesfull but with some configuration assistants failed/skipped ...
is dis a installation useless ... can i fix dis ?
regards,
yasir

Help required from JDeveloper Development Team.

HI there,
I Download the JDeveloper 10.1.2 (1811) from OTN, But the downloaded archive file is unable to open. I did the download once again but I am facing same problem. I want to JDeveloper 10.1.2 for the installation of BI Beans 10.1.2.
Help required from JDeveloper Development Team
Thanks For Your Time,
Regards,
ViSHAL.

Please use an informative Subject line, there is more chance that people will read the post.
All we can suggest is that you try the download again.

Help required with (soundcard) connection / settings, thanks in advan

Help required with connection / settings between a Creative Sound Blaster Audigy Platinum EX (soundcard) and a Creative DTT3500 Digital (5. speakers).
The problem
No sound from any of the speakers. (Exception can plug in headphones at front)
Background
My computer has been recently upgraded at my local computer shop and all programs re-installed (including driver update from Creative's website). However after reconnecting speakers and restoring the original settings I?m getting no sound from any of the speakers. I?ve followed all the available advice/instructions I can find on this website and manuals to no avail.
Set-up
Physical
(Digital DIN) Speakers/decoder amplifier (DTT3500) connected to the (digital out) soundcard (Audigy Platinum EX) using minijack to DIN cable. (As per instruction manual)
Software
Creative Audio Consul ? setting as per instructions, however have tried variations in vain. (Note: above tabs there is a select device box with SB Audigy [A0000] in it ? only option. Just wondering what [A0000] means?)
Your advice please. A simple step by step guide would be appreciated, many thanks in advance, Jon

"My computer has been recently upgraded at my local computer shop and all programs re-installed (including driver update from Creative's website). "
Do you have the original installation disk?
If so, try installing THOSE drivers, ESPECIALLY if it worked before. Be sure to uninstall what is there now, first.
Its natural for most people to want the 'latest' drivers for their hardware. However:
After experiencing some difficulties with some CL 'updates' for certain products, I now avoid them UNLESS I am having a PROBLEM with the existing drivers.

Help required in nzload command

Similar Messages

Maybe you are looking for