Help required in OCM-Order change management

Hi All,
I have to implement the Order change managment. I did few setting which are required and than i created ECR using release key. but using OCM it tells me to first make the changes in MATERIAL BOM than using transaction COCM i can make the changes in required production order.
But my requirement is i want to change the Production BOM or Production routing directly without touching Material BOM .
As sometime it happens only 1 or 2 Order BOM s are need to be changed only not the Material bom. So i want to track the Changes made in Order using OCM.
What is the solution that i can change the Production Bom OR Production Routing directly using OCM and also how can i make the changes in Sales Order.
Pls do the needful.
Thanks
Ravi Khurana

Using Order Change Management (change management for production orders), it is possible to include existing procurement elements (production orders, planned orders, purchase orders) that are also affected by a change, in the change process.
The change process in OCM is based on Initiating Objects. These initiating object records refer to changes in sales orders or in master data, which, in turn, necessitate changes to production orders.
Thus, it is not possible to change the order directly using OCM.

Similar Messages

  • WHAT IS ORDER CHANGE MANAGEMENT(OCM)

    HI GURUS,
    CAN ANYBODY EXPLAIN ME WHAT IS OCM , HOW TO USE IT.
    I UNDERSTAND THAT WITH OCM ANY CHANGES IN PROD ORDER GETS AUTOMATICALLY UPDATED IN MASTER BOM.
    IF ANY SCREEN SHOTS ARE THERE IT WILL BE MORE EASY TO UNDERSTAND
    HELPFUL ANSWER WILL BE GIVEN FULL MARKS.
    THANKS AND REGARDS,

    Hi,
    Order Change Management ( OCM) is used for tracking changes made to the Production / Process Orders.You can see the Change Management records after activating OCM in Order Header Screen--->
    Go to (Menu)--->Change Management.
    For detailed procedure for OCM pls go through the following link :
    [Order Change Management (OCM)|http://help.sap.com/saphelp_erp60_sp/helpdata/EN/41/3699761bc211d2b62b0000e8359890/content.htm]
    Hope this helps.
    Regards,
    Tejas

  • Order Change Management(OCM) in SAP

    Dear All,
    OCM is applicable in MTO Scenario.
    Kindly let me know the steps involved to activate OCM n how to proceed
    further.

    Hi Bagchi,
    Order Change Management is applicable for MTO/MTS Scenario,
    <u>First:-</u>
    In WorkScheduling View of Material Master (FERT/HALB or Any Defined for Production) you need to maintain "<b>Overall Profile"</b>
    <i>This Overall profile should be configured in SPRO > PRoduction>Shop Floor Control > Operations>Change Management for Production Orders--><b>Define Overall Change Profile</b>.</i>
    <u>Process of OCM follows this way:</u>
    Create a Change Number <b>CC01 with Release</b> Key
    In Object Types select/tick "Actv", "object", "MgtRec",
    You get the Change Number by Saving .
    Use this Change Number to Change BOM or Routings
    <i><b>Then Release the Change Number useing Release Key till then you don't find the Change of BOM in Production Order.</b></i>
    Then go to Oder Change Process<u><b> T Code :- COCM</b></u>
    Tick Change Number and Select the Change Number & Execute
    Select the Production Order, click on “Procurement element” icon you get another screen select and execute again.
    You get an Pop-Up screen. "Determine changes”, “Check changes”, “Change Original Order”.
    you see the changes in BOM for Production Order i.e. after COCM.
    Then Confirm the Changes in Production Order then New changes will be Active in production Order.
    Regards
    Rehman
    <b>Reward Your Points If Useful</b>

  • Order change management

    Hi all,
    We have already implemented ECC 6.0 in a manufacturing project based industry. Now customer wants to track production order related changes. So we want to implement OCM.
    Can anyboby please tell the detaild steps for implementing the OCM.
    As per my knowledge i have already done necessary configurations. But when creating change master through CC01, in theentry screen, Function tab is not appearing. Can anybody tell the reason behind this.
    Srijit.

    Dear Srijit
    Order Change Management is applicable for MTO/MTS Scenario,
    First:-
    In WorkScheduling View of Material Master (FERT/HALB or Any Defined for Production) you need to maintain "Overall Profile"
    This Overall profile should be configured in SPRO > PRoduction>Shop Floor Control > Operations>Change Management for Production Orders-->Define Overall Change Profile.
    Process of OCM follows this way:
    Create a Change Number CC01 with Release Key
    In Object Types select/tick "Actv", "object", "MgtRec",
    You get the Change Number by Saving .
    Use this Change Number to Change BOM or Routings
    Then Release the Change Number useing Release Key till then you don't find the Change of BOM in Production Order.
    Then go to Oder Change Process T Code :- COCM
    Tick Change Number and Select the Change Number & Execute
    Select the Production Order, click on “Procurement element” icon you get another screen select and execute again.
    You get an Pop-Up screen. "Determine changes”, “Check changes”, “Change Original Order”.
    you see the changes in BOM for Production Order i.e. after COCM.
    Then Confirm the Changes in Production Order then New changes will be Active in production Order.
    Refer : http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PPSFC/PPSFC.pdf
    Look at  SAP note 436928, which descriped the restrictions from OCM if you are in ECC 6.0
    Regards
    JH

  • Order Change Management and direct manufacturing technique (SOBSL 52)

    Dear all,
    there is a statement in our SAP development team, that I can hardly believe:
    Order Change Management and direct manufacturing technique are not  fully supported in SAP standard (ECC6.0).
    Can any body help me with this issue?
    Kind Regards
    Bernd

    Dear Bernd,
    please see SAP note 436928, which descriped the restrictions from OCM.
    Regards,
    Sabine

  • Difference  Between Order Change Management & Engineering change Management

    Dear,
    What is the Difference  Between Order Change Management & Engineering change Management ?

    Hi,
    ECM will help for Master data changes management.
    OCM will help to manage changes in Transaction Data like Production Orders.
    In brief,you have to first Create Change Number(part of ECM activity).then using that Change number, Master data(like BOM, Routing etc) has to be modified.
    Then through OCM affected Transaction Data(like Production Orders) for each change number to be Processed.
    Regards
    R.Brahmankar

  • Production Order Change Management

    Hi ALL,
    Dealy need of following.
    How the changes to the production order can be viewed?
    Is there any tcode to check this ?
    Regards,
    MHP

    Dear Manish,
    In a standard system it is not possible to track the changes made to a production order.
    However, this can acheived in following ways.
    1.We can develop a custom made report to track changes made to an order.Please check this with your ABAPer.
    The overview of a report will be such that one can analyse the items added,deleted,new items inserted etc.
    2.We will be able to achieve this by order change management.Refer the following link.
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/41/3699761bc211d2b62b0000e8359890/frameset.htm
    Regards,
    Joseph Charles Vaikathussery

  • Order Change Managment

    I have a peculiar type of issue. The production order has the status CGFB- Confirm./goods mvmnt forbidden Which has been activated for the production order through <b>Order change Management</b>. But once this is being activated i am not able to do the delivery and order is blocked. So how should i deactivate this status in the production order. I have checked for the Material in the Work Scheduling view but no Overall profile is being usef for the Material. So i can i deactivate the Status CGFB in the production order set by the Order Change Managment.

    REPORT ZPPSFC179  has been runned  for the production order and the problem is not being solved
    Message was edited by:
            kumar jagadish
    Message was edited by:
            kumar jagadish

  • Order Change Management activation

    Hi Experts,
    I want to activate the OCM (not in production server) to do some research. Can we deactivate it after making research.
    Requirement is "to trace the list of production orders that have undergone quantity or dates change".
    I would like to know whether it is difficult to deactivate like batch management.
    Regards,
    Jejesh

    Dear,
    It is not difficult to deactivate .
    Steps,
    In WorkScheduling View of Material Master (FERT/HALB or Any Defined for Production) you need to maintain "Overall Profile"
    This Overall profile should be configured in SPRO > PRoduction>Shop Floor Control > Operations>Change Management for Production Orders-->Define Overall Change Profile.
    Process of OCM follows this way:
    Create a Change Number CC01 with Release Key
    In Object Types select/tick "Actv", "object", "MgtRec",
    You get the Change Number by Saving .
    Use this Change Number to Change BOM or Routings
    Then Release the Change Number useing Release Key till then you don't find the Change of BOM in Production Order.
    Then go to Oder Change Process T Code :- COCM
    Tick Change Number and Select the Change Number & Execute
    Select the Production Order, click on Procurement element icon you get another screen select and execute again.
    You get an Pop-Up screen. "Determine changes, Check changes, Change Original Order.
    you see the changes in BOM for Production Order i.e. after COCM.
    Then Confirm the Changes in Production Order then New changes will be Active in production Order.
    Use COCM1 to find out the details or CO03--Extra --change
    Please check link from page 399.
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PPSFC/PPSFC.pdf
    Hope it will help you.
    Regards,
    R.Brahmankar
    Edited by: R Brahmankar on Nov 25, 2008 6:30 PM

  • Order change management in Sales order(MTO Scenario)

    Dear All,
    Iam trying to map OCm functionality.How is 'Initial object' created based on changes to the direct assignment of change numbers by using direct assignment.What exactly is this?I have a sales order of 10 pc. against which a prod. order is also created for 10 pc. If there is a change in qty. of sales order from 10 pc. to 15 pc.Is it possible to refelect the same in existing Prod.Order using OCM or any other functionality.

    Hi
    order cahage management is tio track the changes made in production order .
    It is no way to update the production order with changes made in sales order.
    Regards
    YMREDDY

  • Help required in BAPI_ALM_ORDER_MAINFm to change the service order quantity

    Hi,
    Can any one tell me Fm To change the srvice order quantity??
    I am using fm

    Hi,
    Can any one tell me Fm To change the srvice order quantity??
    I am using fm

  • Help required for Payment Term change report in SAP BI

    Dear Experts ,
    I have got a client requirement to develop a report to present all the purchase orders for which there has been a change in Payment Term. Could any one provide his input as which extractor can give me this information or where can I get this data to capture changes in Payment Term in ECC.
    Any suggestions welcome !
    Regards
    Anurag Krishna Dev

    HI,
    Purchase relavant information will be getting from
    2LIS_02_ITM     -  item level information
    2LIS_02_HDR   - Header level information
    2LIS_02_SCL   - schedule level information
    find the below link hope it will help you get more idea...
    http://help.sap.com/saphelp_sm32/helpdata/en/1d/f4383fdb800804e10000000a114084/frameset.htm
    Regards
    BVR

  • Help required in BAPI_ALM_ORDER_MAIN to change quantity

    Hi,
    I want ot change the service order quantity..
    I am using BAPI_ALM_ORDER_MAINTAIN  
    can any one help me with parameters to be passed to tjis bapi to change the order quantity??
    Regards,
    Himanshu.

    DATA:IT_RETURN TYPE BAPIRET2 OCCURS 0 WITH HEADER LINE,
         IT_COMPONENT TYPE BAPI_ALM_ORDER_COMPONENT OCCURS 0 WITH HEADER LINE,
         IT_METHODS TYPE BAPI_ALM_ORDER_METHOD OCCURS 0 WITH HEADER LINE,
         IT_COMPONENT_UP TYPE BAPI_ALM_ORDER_COMPONENT_UP OCCURS 0 WITH HEADER LINE,
         ODR_NO LIKE BAPI_ALM_ORDER_HEADERS_I-ORDERID. " Order Number
    *&--CHANGE COMPONENT--
      IF it_parts_tmp_ch[] IS NOT INITIAL.
        LOOP AT it_parts_tmp_ch INTO wa_parts.
          w_sy_tabix = sy-tabix.
          CLEAR:wa_resb.
          READ TABLE  it_resb
                INTO  wa_resb
            WITH KEY  rsnum = wa_afko-rsnum
                      aufnr = w_sord_num
                      posnr = wa_parts-itemno
                      xloek = ''.
    Fill values in IT_METHODS
          IT_METHODS-METHOD = 'CHANGE'.
          IT_METHODS-REFNUMBER = w_sy_tabix.
          IT_METHODS-OBJECTTYPE = 'COMPONENT'.
          IT_METHODS-OBJECTKEY = w_sord_num.
          IT_METHODS-OBJECTKEY+12(4) = WA_AFVC_TMP-vornr.
          APPEND IT_METHODS.
          CLEAR: IT_METHODS.
          IT_COMPONENT-RESERV_NO = wa_resb-rsnum.
          IT_COMPONENT-RES_ITEM  = wa_resb-rspos.
          IT_COMPONENT-MATERIAL  = wa_parts-partno.
          IT_COMPONENT-PLANT     = wa_parts-plant.
          IT_COMPONENT-STGE_LOC  = wa_parts-sloc.
          IT_COMPONENT-BATCH     = wa_parts-batch.
          IT_COMPONENT-MOVEMENT  = 'X'.
          IT_COMPONENT-CURRENCY  = 'INR'.
          IT_COMPONENT-ITEM_CAT  = 'L'.
          IT_COMPONENT-ITEM_NUMBER  = wa_parts-itemno.
          IT_COMPONENT-ACTIVITY      = WA_AFVC_TMP-vornr.
          IT_COMPONENT-UNLOAD_PT  = wa_parts-usage.
          IT_COMPONENT-REQUIREMENT_QUANTITY = wa_parts-quantity.
          IT_COMPONENT-REQUIREMENT_QUANTITY_UNIT = wa_parts-unit.
          APPEND IT_COMPONENT.
          CLEAR: IT_COMPONENT.
          MOVE: 'X' TO IT_COMPONENT_UP-MATERIAL ,
                'X' TO IT_COMPONENT_UP-PLANT    ,
                'X' TO IT_COMPONENT_UP-STGE_LOC ,
                'X' TO IT_COMPONENT_UP-BATCH    ,
                'X' TO IT_COMPONENT_UP-MOVEMENT ,
                'X' TO IT_COMPONENT_UP-CURRENCY  ,
                'X' TO IT_COMPONENT_UP-ITEM_CAT,
                'X' TO IT_COMPONENT_UP-ITEM_NUMBER,
                'X' TO IT_COMPONENT_UP-ACTIVITY,
                'X' TO IT_COMPONENT_UP-UNLOAD_PT,
                'X' TO IT_COMPONENT_UP-REQUIREMENT_QUANTITY,
                'X' TO IT_COMPONENT_UP-REQUIREMENT_QUANTITY_UNIT.
          APPEND IT_COMPONENT_UP.
          CLEAR: IT_COMPONENT_UP.
        ENDLOOP.
    COMMIT WORK AND WAIT.
      CALL FUNCTION 'BAPI_ALM_ORDER_MAINTAIN'
      TABLES
      IT_METHODS = IT_METHODS
      IT_COMPONENT = IT_COMPONENT
      IT_COMPONENT_UP =IT_COMPONENT_UP
      RETURN = P_it_RETURN.
    *Commit BAPI
      CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
        EXPORTING
          WAIT = '5'.
    It will help you .
    Regards,
    Swarup
    Edited by: swarup basagare on Jun 6, 2008 10:54 AM

  • Workflow Requirement on sales order change

    Hi all,
    I have been assigned to a workflow object where if there is a change in sales order VA02 the mail should be send to external gmail id and SBWP ( sap inbox ). Now using tcode SWELS, i have captured business object that is BUS2032 and in that business object there is a event changed and method is also there. Now how should i proceed with this development ? Where i will have to have mention my workflow no that whenever any change in SO , the workflow get triggered? I have created node HTTP in SCOT tcode ...still mail is now going to gmail id,why is it so?
    Please help me out
    Thanks
    Parag

    Hi,
    Now how should i proceed with this development ?
    1) Goto SWDD, in the Basic Data > Start event, map the event for that BO
    2) In the workflow Create a 'Send Mail' Step' to send the external Mail
    First Understand the workflow and its concept from the [link1|https://wiki.sdn.sap.com/wiki/x/0qo] [link2|http://help.sap.com/printdocu/core/print46c/en/data/pdf/PSWFL/PSWFL.pdf] [link3|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0bbdb3c-d640-2a10-d3b2-e4d9b90536a6] & [Link4|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0cef150-e18d-2a10-e998-f16f7ec1cd9f], then build your workflow
    Where i will have to have mention my workflow no that whenever any change in
    SO , the workflow get triggered?
    Once you map the BO and Event in the, Basic Data > Start event, workflow will trigger automatically
    I have created node HTTP in SCOT tcode ...still mail is now going to gmail id,
    why is it so?
    Did you already created the workflow? If yes can you explain, where you facing the problem
    Regards,
    Surjith

  • Help needed in sales order/ quality management

    In standard sap it is possible to assign an inspection to the delivery type. But client wants a non standard sap inspection to be done at time of order. is it possible? If it is please do help me in customizing this. Thank you in advance.
    M. Ali

    hi,
    Please try table VBFA with fields VBELV = <sales order> and VBTYP_N = 'J' (Shipping/Delivery).
    and also try this also
    if you know delivery number for order ,then you could use FM VTTP_READ
    if you need delivery number from sales order then use VBAP-VGBEL
    pass delivery number to FM or pass the value to VTTP Table
    thanks,
    <b><REMOVED BY MODERATOR></b>
    Message was edited by:
            Alvaro Tejada Galindo

Maybe you are looking for

  • Dial-up no longer works after update to 10.5.8

    I was running 10.5.6 on an Intel Mac, using an external modem on dial-up service. (Nothing else is available here.) Today I got access to a Wi-Fi network and installed the combo update to 10.5.8, along with some other updates. All worked fine. When I

  • I can't get rid of white space between images (even when margins are 0)

    I'd like the user to be able to add two images that actually touch. I've set up 2 image fields that are touching, and set the margins to 0, but there is still white space in between the user added pictures. I thought maybe the problem had something t

  • Two secondary indexes in a where clause

    Hi All, Can any one of you let me know wether DB optimizer will use two indexes if given in where clause........ example : primary index A,B.   secondary C,D,E. select ................ where A in ....                               B in ....          

  • How to force sharepoint 2013 to always send email as one user?

    Hi! In our organization we are limiting the ability to send email to groups for authenticated users only. this causes an issue with Sharepoint, where a user cannot share files with a group. Since sharepoint is authenticating anonymously - the sender

  • Using BIP with EBS without an RDF report

    Hi All, I tried this under 5.6.2 some time ago and got stuck. Was hoping a gun here could solve the problem. I had PLSQL defined concurrent program outputing XML (set to XML output) using fnd_output calls. I defined a Data Definition and Template (us