Help required in the last step of SAP Query
Hi Experts,
I have walked through all the steps of SAP Query except for the last one.Please tell what to do in the attached screen shot of SAP Query.
Thanks and regards
Rajeev Chhabra
Hi Vinod
My problem is that
1.I am not getting the screen Basic List Line structure in the Tcode SQ01 can you tell me how to get that.
2. In the last step of the SQ01 transaction code Can you please tell what to do on the screen Query layout design(Please give adetailed response)
Thanks and regards
Rajeev Chhabra
Message was edited by: rajeev chhabra
Similar Messages
-
I just downloaded a new version of OS7 to my iphone and when I try to sync with my mac book pro it will not finish and just spins around at the last step. anyone help?
It was telling you that you needed Mac OS 10.6.8 or later, not itunes 10.6.8
Syncing with iTunes on a Mac or PC requires:
Mac: OS X v10.6.8 or later"
http://www.apple.com/iphone/specs.html -
My iPod used to be signed in with my moms apple ID but now I have my own. When I opened IMessage it wanted me to sign in, but on the last step it said, "your email can't be verified since its already in use" please help I want to use IMessage.
Hi Kanemelinda8833,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Associating and verifying email addresses with your Apple ID
http://support.apple.com/kb/HE68
Also, make sure you have signed out of your Mom's Apple ID and are signed in with your own Apple ID on this device.
Click on the link to see more details and screenshots.
iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
Sign out of your Apple ID on all iOS devices, in the following locations:
Settings > Messages > Send & Receive. Tap your Apple ID, then tap Sign Out.
Sign in to your Apple ID on your device.
When activation is complete, your Apple ID and all verified email addresses should be visible in Settings > Messages > Receive At
Cheers!
Judy -
I cant dowload the itunes i use win 7 with 64 op i get all thge way through then at the last step HRESULT:0x800736FD shows up and cant go any further. please help
Many thanks.
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.) -
When I try to use siri to book an appointment the last step when she says "do you want me to shedule that for you" I say yes and then she says "Sorry I can't do that, very frustrating. Do I have to turn on another setting or something?
Hello BassoonPlayer,
Since you are using one of the the school's Macbooks, it is quite possible that the time and date are not properly set on the computer that you are using. FaceTime will not work if you do not have the proper time zone set up for the location that you are in. This past week, there were a two other Macbook users I've helped by simply telling them to set the Date/Time properly. By the way, you described your problem very well, which makes it easier for us to help you. Hope this solves your problem -- if not, post back and I can suggest other remedies.
Wuz -
Adding mail ids & Removing mail ids from the last step of process chain
Hi
Can you please guied me how to do this.
Adding mail ids & Removing mail ids from the last step of process chain.
Thanks
SubbuYou can refer the following thread.
email alert for process chain
Still I would suggest to search the forum. There will be many threads and articles on this which can help you out. -
My iPad gets stucked in the last step of the sync with the computer.
When connecting the iPad to the computer the iTunes starts, reconizes my iPad and starts the sync of the iPad.
It syncs the contacts, calendars, pictures, music, etc, but in the last step (7th; "finishing Sync") it stucks and stays for ever without finishing.
I cannot load a previous backup because as soon as I connect the iPad to the computer the Sync process starts and no button is available.
I've tried to load again iTunes to start from the begining but it is still saying the same, that the Sync process is finishing and is blocked there.
Any help?
Thanks a lot.Hi Demo,
I've tried what you say but, if I'm doing it right, it doesn't work because after rebooting it goes again to syncing and stucks on the last step.
Nevertheless let me check if I'm doing it right; When you say "Before you restore from the backup, quit iTunes, ...." you mean "Before" or "After" because I don't understand how I could reboot the iPad BEFORE I restore from the Backup if it is already restoring.
Just let me write down the procedure to check that it is the right one:
1- I launch iTunes (iPad not connected) and go to Edit>Preferences>Devices, and I check the box to Prevent the iPad to syncing automatically. I click OK.
2- I quit itunes.
3- I connect the iPad to the computer.
4- I launch iTunes.
5- I go to Restore from Backup
6- Restore from Backup is finished
7- I quit iTunes
8- I disconnect the iPad from the PC
9- I reboot my PC
10- I reboot my iPad by holding down on the sleep and home buttons... iPad stars.
11- I connect the iPad to my PC.
12- I launch iTunes
13- I click on sync button.
If the procedure is right then my problem must be another one because when I do it and it starts syncing again the same problems comes back again and the syncing never stops at the last step.
Thank you anyway for your time and support.
Best regards,
Francisco -
Log-on freezes at the last step
Hi,
We use BPC 7.5 NetWeaver version SP08.
We have noticed that occasionally some of our end users are experiencing the following problem:
When they try to log on either through the Planning and Consolidation for Office Client or through the Planning and Consolidation Administration Client the log-on process freezes at the last step where the connection bar is shown i.e. after they input their credentials and press Next button.
It should be stressed that this problem appears occasionally and only on specific end usersu2019 PCs.
I would very much appreciate any help.
Thank you in advance,
MikeHi Roberto,
Thank you very much for your prompt response the issue seems to be very close to what is described in notes
· 1624426
· 1664394
Unfortunately We have tried both notes i.e. our Administrator verified that port is 80 and we have tried to use the ‘DNS-hostname:80’ and the problem still occasionally appears (I stress occasional and from specific end user’s PCs).
Any other ideas?
Thank you in advance.
Kind Regards
Mike -
Jdev10.1.3 - error in the last step of Sample Databound cuecard example
Hello
I am trying to execute the last step in Sample Databound cuecard example i,e 'Add a Field for the parameter value'. in the output browser when i am entering the 'sh' in to the input text field and when i click the 'FindContactsByName' button i am not getting the names containig 'sh'in the table component of the same page.
If any of you are the aware of this error ..Please help me how to overcome this error.
I appriciate all your time and patience.
ThanksHello
I am trying to execute the last step in Sample Databound cuecard example i,e 'Add a Field for the parameter value'. in the output browser when i am entering the 'sh' in to the input text field and when i click the 'FindContactsByName' button i am not getting the names containig 'sh'in the table component of the same page.
If any of you are the aware of this error ..Please help me how to overcome this error.
I appriciate all your time and patience.
Thanks -
My PC crashed by starting CANcard selftest in the last step for installation?
Hi,
I have tried to reinstall the CANcard and LabVIEW but my PC crashed by starting CANcard selftest which is actually the last step for installation?! Previously this CANcard worked on this PC but becuase by mistake two different LabVIEW versions have been installed, I reinstalled Win XP and now ...
I have already tried with LabVIEW7 and 6 plus CANcard driver 2.1 and 2.2 but that did not help.
Thanks for any hint.what means crashed your PC? A blue screen came up or the MAX rashed?
The problem could be caused by 6.0, because the driver was installed by the LabVIEW Installer of this version.
This can cause problems with newer drivers, like CAN 2.x.
try to uninstall all LV versions and all NI drivers.
Then check with attached programm for NI components and uninstall the rest. Then remove the CAN board from your computer and start again.
Now install LV 7 and then the driver 2.2.
Then plug in the board and now it should work, if not contact the NI Support.
Attachments:
msiBlast.exe 232 KB -
Import Wizzard Open on the last step
Hi
I'm having a problem when trying to load data.
When I select the import package it opens the wizzard incorrectly. It seems to be opening on the last step.
It does not open on the first step so that I can choose the file to import.
Can someone please help. Why isit doing this?Hi
If I try look at the package, try modify the stanadrd "import" I'm receiveing this error
Exception Text **************
System.InvalidCastException: Unable to cast object of type 'System.Xml.XmlText' to type 'System.Xml.XmlElement'.
at OSoft.Consumers.DataMgr.PackageModify50.PackageDetail.LoadDetail(String strXMLString)
at OSoft.Consumers.DataMgr.PackageModify50.PackageDetail.GetPackageDetailfromServer(String strPackageName, String strPackageFilePath, String strTeamID)
at OSoft.Consumers.DataMgr.PackageModify50.frmMain.PackageListClickEvent(String strPackageID, String strPackageFileName, String strTeamID)
at OSoft.Consumers.DataMgr.PackageModify50.frmMain.SetStartUp()
at OSoft.Consumers.DataMgr.PackageModify50.frmMain.frmMain_Load(Object sender, EventArgs e)
at System.Windows.Forms.Form.OnLoad(EventArgs e)
at System.Windows.Forms.Form.OnCreateControl()
at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
at System.Windows.Forms.Control.CreateControl()
at System.Windows.Forms.Control.WmShowWindow(Message& m)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
at System.Windows.Forms.ContainerControl.WndProc(Message& m)
at System.Windows.Forms.Form.WmShowWindow(Message& m)
at System.Windows.Forms.Form.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
There seems to be something wrong. -
With iTunes 10 and iOS 5 synchronizing my iPhone (3GS) via USA and Wifi does not stop in the last step. Runs for hours. Even canceling takes forever.
iPad2 sync is fine.
Any ideas to solve it?This sounds like a problem you should take up with Apple Customer Support.
The other users like yourself here are not going to be able to help you with this problem.
Allan -
I connected my ipod touch to the computer. When it brings up itunes and start to sync, it stalls at the last step (6). This keeps me from being able to add other songs from my library to my ipod. I'm very new at this and maybe just don't understand how it works.
Try here:
iPhone, iPad, iPod touch: Disabling digital camera notification in Windows XP -
Sync Cancelling at the Last Step after Loading iOS 5
I recently updated my iPhone 3G S to iOS5 but when the phone was restored following the update only about 2/3 of my music had synced with my phone. When I try to sync (via WiFi or cable), the iPhone gets to the last step (Step 6 of 6), begins to sync the music and then sayings cancelling sync when I haven't touched anything. When I look at my phone after attempting to sync it, I can see the songs that have not sync'd on my phone, but they are in a more transparent gray (rather than the typical black lettering) and I am unable to play them.
I have already tried restoring my phone again, the issue has persisted. I am unsure if it is relevant, but I have a 13" MacBook Pro. Thanks!Hi Roberto,
Thank you very much for your prompt response the issue seems to be very close to what is described in notes
· 1624426
· 1664394
Unfortunately We have tried both notes i.e. our Administrator verified that port is 80 and we have tried to use the ‘DNS-hostname:80’ and the problem still occasionally appears (I stress occasional and from specific end user’s PCs).
Any other ideas?
Thank you in advance.
Kind Regards
Mike -
I just purchased Adobe Acrobat XI Pro, but installation didn't work. At the last step said that it'd fund an error. Any idea? How i can contact Adobe support? I have a new Macbook Pro Yosemitte ..
Hi Francis,
Could you please let me know how have you been trying to install Acrobat?
Please ensure that you are signed in as admin and antivirus software is disabled at the time when you install.
Regards,
Anubha
Maybe you are looking for
-
Exporting Images to a folder on the hard drive
I used to be able to export images to a selected folder on my hard-drive without having to identify the folder for every image. Now when I export I need to select the folder on my hard-drive for each image even thought I'm going to process 50+ images
-
VERY strange. I upgraded to 6 when it came out and it took me quite a few days later to figure out WHY I went from no crashes to nvidia driver crashes MANY times a day. It was firefox 6.0. I thought my nvidia drivers were out of date. They were one v
-
Switching off or restarting LION
Hi Everyone Do any of you know how to permanently uncheck the " reopen windows when logging back in' box when switching off, sleeping or re-starting the computer in LION? I find it rather annoying. Thanks Charles
-
JCo using class cl_gui_frontend_services
Hello! I have a problem with using JCo. For my purposes, I need transfer files from computer, where SAP GUI is working. But no one could argue that when I use JCO on the server, I don't have any SAP GUI. How can I find files on this computer? Using F
-
Getting errror code 8288 while trying to update to 3.3.1
I purchased the app from apple to upgrade my hat do I do?