Help required Memory Upgrade on MS-6178
I have a 3 year old Tiny PC with a Intel 600 and running 128 Mb of memory (double sided) at 100Mhz. The motherboard is MS-6178.
I recently purchased 128Mb (single sided) of additional memory to upgrade to 256Mb. The problem I have is that the new memory only reads as 64Mb therefore, showing only 192Mb instead of 256Mb
I have tried branded and unbranded memory and it is still shows 192Mb.
Is there any way round this. anyone's help would be very much appreciated. ;(
find an older ram thats double sidded like first
common problem with older pc ,they cannot cope with newer denser ram
Similar Messages
-
Need help with memory upgrade on Satellite A100-250
Help me with upgrade memory on TOSHIBA Satellite A100-250 up to 1024 mb.
I want to buy another slat of memory ddr2-533 512 mb, what exactly model am I necessary to search, that they worked in a pair.
Sorry for bad english. From Russia with Love.
PS. I like drink russian vodka :)Hay
Your notebook can be upgraded up to 2 GB and compatible RAM is DDR2-400/533 1GB (PA3411U-1M1G).
Use this part number in Google and you will find it.
Bye and dont drink too much Vodka. ;) -
Help required with upgrading to OS5 on curve 8520
Hello everyone,
I'm using an unlocked version of the bb curve 8520 and want to upgrade my bb device os to v5.0. (current version- 4.6.1)
I tried using the application loader on the bb website (NA & India both) but it just tells me that my OS is updated and that i will be notified if there are any updates available. I would be really grateful if someone could help me update my os.
Solved!
Go to Solution.Hello,
Your warranty is not endangered. You are free to use any carriers OS package on your BB. Your carrier may, however, refuse to provide you with support (including Warranty evaluation/service) until you fall back to their supported device OS level. But your warranty per se is not endangered.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Help required in upgrading from 8.1.5 to 8.1.7
We are having our application running on forms 4.5 and oracle 8.1.5 on winNT and Win2k. Now for the time being we want to upgrade to oracle 8.1.7, for that I need all steps to be performed, can any one help me? Pls!!!
Hi,
normally there is a file "Readme.html" in the root of the patch CD/directory that states the upgrade path.
I don't have by the hand a 8.1.7 CD, but the standard path is:
- Disconnect all the clients
- shutdown DB using shutdown immediate
- stop all Oracle services (Listener, Agent, Management Server, etc.)
- Make a full backup
- Install new version of the software
- FIx Init.ora parameters
- startup DB with STARTUP MIGRATE
- execute the catpatch script
- shutdown immediate
- startup
But Readme instructions that follow the product version may state something little different so IT IS MANDATORY to follow the instructions.
Hope this helps
Max -
Please help required to upgrade from Snow Leopard to Mountain Lion.
Hello Community!
I have a iMac model 11,3. With 27" screen, Intel Core i7 2.93 Ghz, 12 GB ram, 1 TB hd.
My only internal disk is "Macintosh HD".
It's now running Snow Leopard fully updated to the latest.
I bought and downloaded Mountain Lion from the App Store.
But it refuses to upgrade saying "This disk cannot be used to start up your computer".
This seems so stupid because its starts the computer with Snow Leopard each time.
So please, anyone can tell me what is happening and how to solve this ?
Thanks in advance.Perhaps these two links would be of help:
http://support.apple.com/kb/TS3926
https://discussions.apple.com/thread/4136394?tstart=0 -
Help required in upgrading from 9i to 10g server
Hi All,
Our company is upgrading from oracle 9i to 10g in Unix environment.
As a Oracle developer my work is to ensure that oracle 9i programmes should suceessfully work in 10g also.
Please provide me some good links and articles about any pitfalls or code that has to be changed.You may want to read this manual:
Oracle® Database New Features Guide
10g Release 2 (10.2)
Part Number B14214-02
so you get acquainted with the new features and you can assess, according to the new features, which are the most important in your case.
~ Madrid -
Help required in running SPAU and SPDD transactions for post upgrade
Hi All,
We are doing a system upgrade to EHP1.
We need help in SPAU and SPDD runs and why are they required in upgrade activity.
Kindly respond.
Thanks in advance
Regards
RashmiHi Rashmi,
SPDD and SPAU are modification adjustments that you need to adjust after upgrade. This is a situation where the upgrade has to enhance some structures and elements that was available in previous version (probably 3.x). The system can not determine whether to overwrite the structures or to retain the old version. If the structures are custom structures, the system might overwrite any enhancements that you have done. In this kind of situations, the system puts any such structures and elements that it can not make a decision into these 2 lists. SPDD is for dictionary objects and SPAU is for configurations. You have to fix all the issues that are produced in these transactions. You need to first fix the ones in SPDD list and then the SPAU list. Once you drill down in those lists, it asks you to take actions like "change it", "keep the old version" or "ignore the changes" (I think these are the options). You need to chosse these options based on your analysis and turn all the yellow and red ones into green. Hope this gives you some idea.
Thanks and Regards
Subray Hegde -
Can anyone help me with upgrading memory in my older iMac? I currently only have 1gb of memory so as you can imagine my machine is quite slow. I check in my system profiler and it shows I do have a memory slot open. It is using a DDR2 and I was told that the latest are DDR3 and I need to find out if I can run that on my model number. This info came from a tech guy at best buy.
That is what I needed. You can upgrade to a maximum of 6gb of ram and need the following type:
200-pin PC2-6400 (800MHz) DDR2 SO-DIMM. You can easily find it online, here is an example: http://eshop.macsales.com/shop/memory/iMac/Intel_Core_2_Duo_PC2-6400 -
Memory upgrade on iMac G3 700, help with system crashes
I tried to do a memory upgrade on my iMac, so I bought two kingston 256 MB PC133 modules, but none will work, the system starts, but hangs in about two minutes after loading the desktop. I went back to use the older memory module wich is an spectek, but I need the upgrade, any ideas?
Thanks!
FedericoMG.
Ps: Sorry about my english... I'm from Argentina... :-PHi Federicomg
The iMac 700 G3 should have been supplied with 1 stick of 256mb ram. However which is the correct type i am not sure as the Apple specifications for this model state PC100 whereas my iMac G3 700 graphite was supplied with 256 MB PC133-333 SDRAM
http://support.apple.com/specs/imac/iMacSummer2001.html
Apple profiler from my iMac this is the original supplied RAM from Apple:-
DIMM0/J13: Size: 256 MB
Type: SDRAM
Speed: PC133-333
1) I would re-instal the original ram and open system profiler to see what type the ram is.
2) Keeping the original stick in place add another stick of the new ram and look again in profiler to see if its recognised and again try the second stick to see if there's a problem with one of the sticks.
I am currently running my iMac with a small upgrade of RAM and the additional RAM is 128MB of PC100 and i have noticed the performance improvement since adding the PC100 so it's working and i have suffered no ill effects doing this..
paul.. -
Need some guiding with my MacBook Pro memory upgrade
i just bougth the PowerBook Pro. it's the 15.4-inch, 1.83GHz Intel Core Duo with 512MB (single SO-DIMM) 667MHz DDR2 SDRAM. i would like to upgrade the memory to 1GB (ideally i would like it to be to the max of 2GB but believe it or not i'm on a buget at the moment). do i buy just another 512MB chip or do i have to buy the 2 X 512MB kit or straight the 1GB chip?
also, if you do have the time and feel like helping an amateur, how exactly does the amount of memory affect the speed performance of the programs? does higher memory only allow the better performance of more simultaniosly running programs or does it actually increase the speed they run in? every bit of info on this topic would help. thank you in advance. Michaeli just bougth the PowerBook Pro. it's the 15.4-inch,
1.83GHz Intel Core Duo with 512MB (single SO-DIMM)
667MHz DDR2 SDRAM. i would like to upgrade the memory
to 1GB (ideally i would like it to be to the max of
2GB but believe it or not i'm on a buget at the
moment). do i buy just another 512MB chip or do i
have to buy the 2 X 512MB kit or straight the 1GB
chip?
if you have a 512 installed, you just buy one more 512 stick.
there are only two slots for ram in your macbook...
if you bought the 2x512 kit, you'd have one left stick
left over... but the advantage here would be that you'd
be installing 'matched memory'. this leads to some
small performance gains which you may or may not
ever notice, depending on how you use your machine...
also, if you do have the time and feel like helping
an amateur, how exactly does the amount of memory
affect the speed performance of the programs?
applications require memory to do stuff - they use
it to store the information that they'll need to do what
you asked them to do. more RAM means you can
run more applications at once (and they'll all have
all the memory they'll need), and for some intensive
applications like photoshop and iMovie/iDVD etc, more
ram allows them a lot faster...
does
higher memory only allow the better performance of
more simultaniosly running programs or does it
actually increase the speed they run in?
yes, and if it's an 'intensive app', yes...
you will likely notice the change from one 512 to two 512's,
and you'll like it. going from 1GB total to 2GB total (but
replacing both 512's w/ 1GB's) you might not notice for
most of your day-to-day activities, unless those include
somethign hard core (rendering in iDVD for example)...
cheers
every bit of
info on this topic would help. thank you in advance.
Michael -
Memory upgrade fail - Kernel panic after put old memories back
I People, this is my first post here and unfortunately is to report a problem, not to help friends.
I did an memory upgrade last weekend. After this, he will not boot normally, only in safe mode.
I discovered that they sent me 1333Mhz memories, and my mac (mid 2009) supports only 1066Mhz.
I put the old memories again, however I believe that the system did not recognize.
As you can see below, the system recognizes two modules:
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353237334448302D4348392020
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334648302D4346382020
It is not true, I' using now 2 x 2GB, DDR3, 1067 Mhz (stock)
I tried to reinstall the system, but when I try, I got crash again.
how can I solve this issue?
Interval Since Last Panic Report: 5298 sec
Panics Since Last Report: 6
Anonymous UUID: EAEB74C4-4B23-BCC2-1A48-B6FEB255C9FF
Mon Apr 1 16:37:33 2013
panic(cpu 1 caller 0xffffff800e0876ab): "Spinlock acquisition timed out: lock=0xffffff8011bff270, lock owner thread=0x10d9fb0aa, current_thread: 0xffffff801f873000, lock owner active on CPU 0xffffffff, current owner: 0x10d9fb0aa"@/SourceCache/xnu/xnu-2050.7.9/osfmk/i386/locks_i386.c:363
Backtrace (CPU 1), Frame : Return Address
0xffffff80f54fbd10 : 0xffffff800e01d5f6
0xffffff80f54fbd80 : 0xffffff800e0876ab
0xffffff80f54fbdb0 : 0xffffff800e06256b
0xffffff80f54fbf40 : 0xffffff800e0b7f69
0xffffff80f54fbfb0 : 0xffffff800e0ce3d1
BSD process name corresponding to current thread: diskarbitrationd
Boot args: config="\OS X Install Data\com.apple.Boot" root-dmg=file:///OS%20X%20Install%20Data/BaseSystem.dmg
Mac OS version:
12A269
Kernel version:
Darwin Kernel Version 12.0.0: Sun Jun 24 23:00:16 PDT 2012; root:xnu-2050.7.9~1/RELEASE_X86_64
Kernel UUID: 8D5F8EF3-9D12-384B-8070-EF2A49C45D24
Kernel slide: 0x000000000de00000
Kernel text base: 0xffffff800e000000
System model name: MacBookPro7,1 (Mac-F222BEC8)
System uptime in nanoseconds: 8887270925
last loaded kext at 1689458563: com.apple.driver.AppleUSBTCButtons 235.4 (addr 0xffffff7f8f6c7000, size 20480)
loaded kexts:
com.apple.driver.AppleUSBTCButtons 235.4
com.apple.driver.AppleIRController 320.15
com.apple.driver.AppleUSBTCKeyEventDriver 235.4
com.apple.driver.AppleUSBTCKeyboard 235.4
com.apple.driver.DiskImages.ReadWriteDiskImage 344
com.apple.driver.DiskImages.SparseDiskImage 344
com.apple.driver.DiskImages.UDIFDiskImage 344
com.apple.driver.DiskImages.FileBackingStore 344
com.apple.driver.DiskImages.HTTPBackingStore 344
com.apple.driver.DiskImages.RAMBackingStore 344
com.apple.driver.AppleFileSystemDriver 3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 34
com.apple.driver.AppleUSBCardReader 3.1.0
com.apple.iokit.SCSITaskUserClient 3.5.1
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.2.0
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleUSBHub 5.1.6
com.apple.iokit.AppleBCM5701Ethernet 3.2.5b3
com.apple.driver.AirPort.Brcm4331 600.15.20
com.apple.driver.AppleFWOHCI 4.9.5
com.apple.driver.AppleAHCIPort 2.4.0
com.apple.driver.AppleUSBEHCI 5.1.5
com.apple.driver.AppleUSBOHCI 5.1.5
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleACPIButtons 1.6
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.6
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 196.0.0
com.apple.nke.applicationfirewall 4.0.39
com.apple.security.quarantine 2
com.apple.driver.AppleIntelCPUPowerManagement 196.0.0
com.apple.driver.AppleUSBMultitouch 235.7
com.apple.iokit.IOUSBHIDDriver 5.0.0
com.apple.driver.DiskImages.KernelBacked 344
com.apple.iokit.IOSCSIBlockCommandsDevice 3.5.1
com.apple.iokit.IOUSBMassStorageClass 3.5.0
com.apple.driver.AppleUSBMergeNub 5.1.5
com.apple.driver.AppleUSBComposite 5.0.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.5.1
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.5.1
com.apple.iokit.IOUSBUserClient 5.0.0
com.apple.iokit.IOEthernetAVBController 1.0.2b1
com.apple.iokit.IO80211Family 500.15
com.apple.iokit.IONetworkingFamily 3.0
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.driver.AppleMCP89RootPortPM 1.11
com.apple.iokit.IOAHCIFamily 2.2.0
com.apple.iokit.IOUSBFamily 5.1.6
com.apple.driver.NVSMU 2.2.9
com.apple.driver.AppleEFIRuntime 1.6.1
com.apple.iokit.IOHIDFamily 1.8.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 220
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 344
com.apple.iokit.IOStorageFamily 1.8
com.apple.driver.AppleKeyStore 28.18
com.apple.driver.AppleACPIPlatform 1.6
com.apple.iokit.IOPCIFamily 2.7
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
Model: MacBookPro7,1, BootROM MBP71.0039.B0E, 2 processors, Intel Core 2 Duo, 2.4 GHz, 8 GB, SMC 1.62f7
Graphics: NVIDIA GeForce 320M, NVIDIA GeForce 320M, PCI, 256 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353237334448302D4348392020
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334648302D4346382020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.106.98.100.16)
Bluetooth: Version 4.1.3f3 11349, 2 service, 11 devices, 0 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: ST9500420AS, 500.11 GB
Serial ATA Device: MATSHITADVD-R UJ-898
USB Device: Built-in iSight, apple_vendor_id, 0x8507, 0x24600000 / 2
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0x26100000 / 2
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06600000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8213, 0x06610000 / 7
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x06500000 / 3
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0236, 0x06300000 / 2Hi BGreg,
I already reset the PRAM as you said.
I've cleaned the memory modules as indicated by Linc above.
Today I formatted my harddrive to try a clean install, but system crashs after 5%, 10%.
There is something making me worried:
In one of my tries, I opened the system view to check my actual hardware configuration, and to my surprise, the system shows me 8GB installed. Cannot be. I have 2 x 2GB.
Where my system stores this information? There is a way to reset it? I tried last hour install the snow leopard, that cames with my mac, by DVD, but does not worked too.
Thank you all so far.
Giuliano -
I ordered 8GB memory for my imac mid-2011 model.
I then tried to install and all I'm getting is three beeps telling me there's something wrong with my memory.
I've tried all configurations but can't get the 2x4gb modules to work.
I've had to stay with only the original 2x2gb ones it came with.
Can anyone please help.
The only difference, besides the size, between the two modules is that on the 4gb ones is says PC3-10600S-9-10-F2 and the 2gb ones say all the same except instead of F2 at the end it's F1.
Cheers.Which would seem to suggest that you may (unusually) have a doubtful memory module. Less unusually, you would have paid over the top for it.
Many people on these forums speak well of the following suppliers.
In North America contact OWC … Upgrade Apple iMac Memory
In Europe contact Crucial.com … RAM Memory Upgrade
Both companies have facilities to guide you and will recommend the correct memory package to meet whatever needs you describe to them.
There may be benefits buying from your own geographical location insofar as Shipping charges, Local sales taxes and Exchange rates. Check out the basic memory costs and do your sums next time you buy. -
Help, I am upgrading a PC for a friend and have replaced the standard 128Mb PC100 ram with a matched pair of 256Mb PC133 DIMMs but the PC refuses to see any more than 128Mb. I have flashed the BIOS to 1.7 without any difference.
Is there a setting in the BIOS or Jumper that restricts the memory available?
Cheers.So each one alone is 128MB and also both of them together are 128MB ?
Try clearing the CMOS then. -
Memory upgrade on Satellite Pro L40-15d
Hi
I have Satellite Pro L40-15d with 512 memory (Samsung) but I wont upgrade to 1GB. I have Kingston ktt667d2/1g I have tray to put in to both slots but nothing work I cant switch on computer.
But when I change for old one laptop is ok. What can I do? Install special program or update BIOS or maybe the memory stick is broken.
RegardsHi
The notebook doesnt boot after the memory upgrade due to these different issues;
- memory modules are not compatible together
- memory modules are not compatible with the notebook
- memory modules are faulty
- one of memory slots is faulty
In most case the memory module replacement helps.
One hint; did you try to switch the memory modules in the slots? Sometimes this helps.
Several weeks ago I have updated my memory and the notebook didnt boot.
I thought its a memory malfunction but after module switching the notebook booted correctly.
Good luck -
Memory Upgrade on DV7T-3000 (NQ339AV)
Hello,
I have a Pavilion DV7T-3000 with i7-820QM Processor. I am planning on a memory upgrade. Has any one tried upgrading it to 16GB RAM ? (2 x 8GB). As per specs it can only go up to 2x4 GB.
Thank you for for any feed back.I believe you should try to PM a level 8 or higher expert here and see if they will access someone from HP.
Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may click on the white star in the "Kudos" button for any helpful post to give that person a quick thanks. These feedback tools help keep our community active, so you receive better answers faster.
Maybe you are looking for
-
Ipod has been detected but cannot be propberly identified
ipod has been detected but cannot be propberly identified i tried everything my itunes will not proberly identify the ipod
-
Colors Oversaturated in Mountain Lion
I've just now finally upgraded to ML from Lion, and find that the colors on my display are out of kilter. The icons on my dock, for instance, are way oversaturated. I've searched Apple Discussions and Google and seen a lot of mentions of problems alo
-
How can I open my .cwk files on my new iMac OS 10.8?
How can I open my .cwk files on my new iMac OS 10.8?
-
Mac OS X 10.9.5/CS6 flvデータ不良 OSの影響はあるのでしょうか?
Mac OS X 10.9.5で.CS6を使用しているのですが. Premiere.Media Encoderどちらもで書き出した FLASH外読み用のflvに原因不明の読み込みエラーが起こってしまいます. (ローカルでvlcでの再生は可能.サーバー上で負荷がかかってしまい.再生に問題あり.) YosemiteのCS6では正常に再生されるので. flvに問題があると思うのですが.OSによってこのような影響は生じるのでしょうか. エラーがでる原因が知りたいです.
-
Will the Itanium2 version of Oracle 9i Database Enterprise Edition for Linux/IA64 work with SuSE Enterprise server for Itanium2?