Help required on 3508 and gigabit copper Please.

Im running a cisco WS-C3508G-XL-EN with software 12.0(5.4)WC(1) and 4 WS-G5482 1000Base-T GBICs connected to and 1 Intel Pro 1000-T (Driver version 2.84.284.0) network Card and 3 3Com 3c996-T Gigabit Copper Cards (Driver Version 1.29). All the PCs are running Windows 2000 pro or server.
The built in diag software that comes with the drivers reports that its connected at gigabit speed and there are no dropped or bad packets.
The ports are configured for auto negotiation, full duplex and asymmetric flow control.
But if I connect to the console port on the back of the 3508 it reports 2d23b: %LINK-3-UPDOWN: Interface GigabitEthernet0/1, Changed state to up.
It then changes state to down, this happens for all connected ports.
As a result the throughput on the gigabit ports is less than on a 100 port.
Can anyone give me any idea what I can do to keep the ports up?
Thanks
Jim

Since there has been no response to your post, it appears to be either too complex or too rare an issue for other forum members to assist you. If you don't get a suitable response to your post, you may wish to review our resources at the online Technical Assistance Center (http://www.cisco.com/tac) or speak with a TAC engineer. You can open a TAC case online at http://www.cisco.com/tac/caseopen
If anyone else in the forum has some advice, please reply to this thread.
Thank you for posting.

Similar Messages

Help required in webclient and crm report integration

Hi ,
how to integrate webclient and CRM reports in CRM 2007 UI.
i dont have much idea in this area.My requirement is integrating CRM report and webclient.But i dont know where to find report adn how to link the report to webclient.
Please anyone help me.
Thanks in advance
geetha,

Hi Geetha,
Create new CRM business role by copying standard SERVICEPRO or SALESPRO
Even u can assign business roles SERVICEPRO or SALESPRO to Oraganization units.
Goto Org assginement and assign these business roles (Goto-Detail Object-click on business roles (Z or standard)-Save it.
Assign your BP to org position
Execute transaction code BSP_WD_CMPWB
Enter CRM_UI_FRAME in test application and click on execute.
select the profile -Left side menu you will find the standard reports.
Regards
Shanmuga
Please let me know my inputs help you to find the report.

Help required in writing And Reading Xml From Database

Hi
i m new to java.
i m facing problem while writing Xml file from Mysql Database in java i m using the WebRowSet
and also for Reading WebRowSet
after reading the Xml i have to save this in Database
(required source code)
is there any one to help me in this way
regards
aamir

shadab_think_globally wrote:
{noformat}*hi everybody,
please send me a ajax with jsp application
suppose i enter a word in text area ajax will populate/suggest all string from database ,who started
from that entering character(s).like a google string search.
please send full source code
*{noformat}how about you do it yourself?

Help required for slicing and merging file

Hi,
I am working on p2p downloading application based on Gnutella. Right now i am trying to implement downlaoding one file from many hosts at a time(like limewire does). i am able to connect to multiple host. but dont know how to downlaod and merge file for his purpose.
i know how to download one file from single host. but dont know how to handle file coming from multiple hosts.
if anyone having knowledge, please tell as soon as possble.

Hi.
thanks for the reply. Actually i had something same
in my mind. but unfortunately i am quite week in
serializtion and file stuff. If you could provide me
with code snipet for this, or can just simulate in a
fewer lines of code, it would be a great help for
me...i have too much short time...
i think i really have to study this file
stuff..........You shouldn't use serialization. Just invent a protocol, and "normal" binary data.
Kaj

Help required for sample and Hold

Hello,
I am working on a project Cerebral Oxygenation Monitoring. The concept is similar to pulse oximetry. I help already developed the hardware that includes the timing circuit , led driver for driving Red and IR Led, Amplifier and Filter Stage. I am getting the pulse signal but it is multiplexed signal corresponding to effect of both Red/IR Led. Now to separate it I need to use sample and hold circuit, whihc I can achieve with and IC LF398 but I want to minimise this part and directly take this multiplexed signal through DAQ Card in to LabVIEW and further create sample and hold in LabVIEW.
The sampling needs to be in synchronus with the Timing signal given to Red and IR. How I can achieve this in LabVIEW.
For eg: the Red Led is triggered with a pulse of 1 ms with a repeatation rate after 10 ms. So this timing pulse should trigger the sampling part.
Please Help.

CoastalMaineBird wrote:
Not sure what you need the HOLD part for.
Correct me if I'm wrong:
You have a 1 mSec pulse, every 10 mSec.
Each pulse triggers two LEDs: RED and IR
You have a single signal which contains the processed (through the body, or whatever) responses to BOTH of those signals.
So, how does a S&H, hardware or otherwise, separate the two responses?
Is one delayed in time, relative to the other?
YES you are right, 1 mSec pulse, every 10 mSec.
Above figure shows the trigger pulses generated using standard hardware. One triggers IR and other triggers RED. In above case I had kept repetation rate 4msec
This is the signal which I may get
Now how do I separate both of these signals in LabVIEW

Help required with DAQ and waveform generation

Hi,
I'm using DAQ 6024E card for waveform acquisition using LabVIEW 8.2 version. I've also attached my vi for your reference.
My next step is , I want to add another waveform to the acquired waveform, i.e. I mean to say if the acquired waveform is a sine wave with 60 Hz frequency and amplitude of 8V peak-to-peak, I want to finally display a wave which is 8V peak-to-peak with sinusoidally changing freuency.
To be more clear...I want a sine wave with frequency = 60 Hz + 1*sin( 2*pie**t).
As cane bveen seen in my vi, I can extract the phase and magnitude of the original acquired signal.
Can anyone help me out with this...as I'm not able to figureout how should I proceed next.
Looking forward to hear soon,
Regards,
Rohit
Attachments:
test_analog.vi ‏162 KB

You'd probably want to use the DAQmx VI's instead of the Express VIs, when doing something more exotic. You can start by converting the existing Express VIs to code by opening their front panels and saving them as a VI.
Regards,
André
Using whatever version of LV the customer requires. (LV5.1-LV2012) (www.carya.nl)

Help with URL Parameters and HTML DataSet please.

Hello everybody!
Looking at the example page: "Using URL Parameters to Control Data Regions", towards the bottom it gives an example of "Set by Product Name", from an XML DataSet using the following sample code:
    //Data set for the second example. var ds2 = new Spry.Data.XMLDataSet("../../demos/products/products.xml", "products/product");    //If the URL parameter 'product' has a value, set the XPath that includes a filter and then load the data. if (params.product){    ds2.setXPath("products/product[name = '"+params.product+"']");    ds2.loadData(); }
Can anyone please explain how to amend this to work with a HTML Dataset rather than XML?
The first example on the page (Set by RowID) works unchanged for the HTML DataSet, but I don't know what I should replace the 'setXPath' line with.
I see this has been asked before, but I'm afraid I can't find any answer that works (or, more often, that I can understand properly!)
Grateful for any suggestions.
Len

Wow! Thanks Ben.
I hadn't thought about using Stacked Containers.
I'll test this out tonight and let you know how I get on.
Cheers,
Len
A few days later and at last I've been able to test your suggestions.
I think I must be doing something wrong as the links and content don't work at all:
http://www.myosanthe-bernhard-huber.com/html/stack1.php
I know that the stacked containers do work (http://www.myosanthe-bernhard-huber.com/html/stack0.php), so I guess there are some errors in the coding somewhere.
Would you mind reviewing, please?
The important thing for me (in this case, anyway) is to get the called page's content using its 'Ref', and I'm not sure what benefit there is in using stacked containers as opposed to master-detail containers.
The master-detail method works reasonably well for me at
http://www.myosanthe-bernhard-huber.com/html/fotoalbum.php and sub-pages.
Perhaps I am betraying my lack of knowledge, but as I said in my original post, I think that I just need the HTMLDataSet equivalent to:
    //Data set for the second example.
var ds2 = new Spry.Data.XMLDataSet("../../demos/products/products.xml", "products/product");
   //If the URL parameter 'product' has a value, set the XPath that includes a filter and then load the data.
if (params.product){
   ds2.setXPath("products/product[name = '"+params.product+"']");
   ds2.loadData();
which as you can see uses an XMLDataSet, but does exactly what I need.
(see http://labs.adobe.com/technologies/spry/samples/data_region/DataWithURLParams.html)
Thanks again for your help, Ben.
Len
Message was updated by: ec1lennie

Help with iWeb 09 and ftp publishing please?

I'm using iWeb09 and when I publish my website via ftp, the address it publishes to is my web address, followed by / and the name I gave the website on iWeb. So its not showing on my actual website. When I go to visit the website via the successfully published screen, the message I get is the requested url is not found on this server. Any help please?

Make sure you entered the correct URL in the Publishing Settings page and that you have left the Directory/Path field blank as shown on the first example on this page...
http://www.iwebformusicians.com/iWeb/Publish-Website.html
To remove the sitename from the URL...
http://www.iwebformusicians.com/iWeb/URLs-Favicons.html
"I may receive some form of compensation, financial or otherwise, from my recommendation or link."

Deatil Help required on OVS and Sample code

Hi All,
I am not able to understand the OVS(Object Value Selector) which is given in the help.
If any one who worked on this, please give a sample source code or give detail help( Step by Step).
Thanks
Ravi

Ravi,
Did you check <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/developerareas/webdynpro?rid=/library/uuid/49f2ea90-0201-0010-ce8e-de18b94aee2d">web Dynpro Sample Applications and Tutorials</a>?
Namely, <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/downloaditem?rid=/library/uuid/5dcbe990-0201-0010-2c99-a2bc9e61acfc">advanced Value Help: Object Value Selector (9)</a>.
Valery Sialev
EPAM Systems
http://www.NetWeaverTeam.com

Help to install iTunes and Quick Time please!

I really hope you can help me. I have been working my way through this forum for around 5 hours today. I have tried a number of your suggestions and have made some progress.
- My iTunes hasn't been working for some time. I tried to uninstall it and reinstall a fresh version but it wouldn't uninstall.
- So following forum advice, I downloaded and ran Windows Install Clean Up and also did a manual deletion exercise. This left a few odd files that wouldn't delete.
- I have downloaded iTunes 8.2 but it won't install. I get an error message: "error writing to file: c:\programfiles\commonfiles\apple\mobile device support\syncservices\schemas\calendars.syncschema\contents\windows\calendars.ex e Verify that you have access to that directory" and eventually I get a message telling me that iTunes needs Quick Time.
- I also downloaded the stand alone version of Quick Time. When trying to install it I get the error message "error writing to file:c:\programfiles\quicktime\pictureviewer.resources\ko.1proj\pictureviewerlo calized.dll Verify that you have access to that directory"
- I can confirm that I am the only user of this computer and I have administrator rights.
- I have installed the latest Microsoft updates.
- I have restarted my computer about 3 times, after each major thing I've tried.
Totally Stuck Now!
I did read a suggestion about using a Microsoft fix but it involves going into the registry and I don't have the confidence to do that, I don't really know what I'm doing at all, I'm just following my nose!
When my computer starts up CheckDisk says "correcting error in index $0 16208" and after correcting and sorting it says "an unspecified error occurred".
Please help!!

It sounds as though the file referred to in the error message is corrupt and Windows cannot read it.
Try running a disk check. If it finds and fixes errors, try reininstalling. If not it it doesn't work, go on to the next step.
Try renaming c:\programfiles\commonfiles\apple\mobile device support\syncservices\schemas\calendars.syncschema\contents\windows\calendars.ex e as ...calendars.old.
If Windows will not allow that, then rename the containing folder.
This should allow the install to proceed as it will not see the corrupt file.

I need HELP configuring SanOs 203 and syslog server Please!

I have a kiwi syslog server on a windows 2003 server to which i can not get my switches to send messages to it.
can someone please help.
I tried to configure from the cli and from the DUI without any luck.

You say it does not configure or that it does not send messages when it is configured? Can you port a show log info. I do not have Kiwi syslog on my network but do run 3CDaemon with no problems with SAN/OS 2.0.3
Is syslog server ping-able from switch?

Seeburger help required for 810 and Dispatch Advice (IDOC type DESADV).

Hi All,
1. Please let me know blogs which clearly shows settings for Seeburger components for 850 (Purchase Order) to IDOC Scenario
--- Seeburger Workbench
--- Seeburger Mapping Designer (BIC)
--- Seeburger Counter and Varaibles
--- Seeburger AS2 Spoke
--- Any other Seeburger Component setting required
I have understand blog for 850 -- /people/rajeshkumar.pasupula/blog/2009/08/05/wanna-implement-seeburger-for-edi-find-the-booster
2. Anybody has blog for 810 or Dispatch Advice (IDOC type DESADV).
3. Can anybody provide me Mapping Logic (at field level) done in XI/PI for 850, 810 , Dispatch Advice (IDOC type DESADV) .
Regards

Hi Rickkk,
1. Please let me know blogs which clearly shows settings for Seeburger components for 850 (Purchase Order) to IDOC Scenario
--- Seeburger Workbench
--- Seeburger Mapping Designer (BIC)
--- Seeburger Counter and Varaibles
--- Seeburger AS2 Spoke
--- Any other Seeburger Component setting required
For SEEBURGER workbench please go through this blog and navigate the enbebbed links furthur to know about Seeburger workbench too.
/people/prateek.srivastava3/blog/2009/08/01/seeburger--part-1--the-basics
2
2. Anybody has blog for 810 or Dispatch Advice (IDOC type DESADV).
For 810 i think the procedure would be the same but themseeburger mapping program that validates the ANSX 810 would be different.As far as 997is concerned 997 is a functional acknowledgement.Its a genric format that is used to send acknowledgement for any EDI transaction set that has been sent.
3. Can anybody provide me Mapping Logic (at field level) done in XI/PI for 850, 810 , Dispatch Advice (IDOC type DESADV) .
The logic will be based on the trading partner guidelines which will contain the description of all the semantic and syntactiic description about the segments ,its feilds.we need to consider the guidelines and target side specifications too while mapping.
Thanks,
Ram.

Help required: class assignment and values for functional location

Hi All,
My requirement is to get classification data for a functional location as in IL03.
Can any one let me know where in the standard program are they getting the assigned classes
and class values. So that I can use the same logic.
Thanks.

FM BAPI_OBJCL_GETDETAIL
OBJECTKEY                       ?0100000000000011643
OBJECTTABLE                     IFLOT
CLASSNUM                        ZPMI_BLDG
CLASSTYPE                       003
KEYDATE                         29.07.2009
UNVALUATED_CHARS
LANGUAGE                        EN
Cheers!

Help required in setting and getting attribute

here i have created a jsp file in the first file the user enter his names and in second jsp file the user get his name and third file i need tp pass the parameter
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
<title>JSP Page</title>
</head>
<body>
<form action="welcome2.jsp" method="POST">
please enter ur name <input type="text" name="username" value="" size="20" />
<input type="submit" value="submit" />
<input type="reset" value="cancel" />
</form>
</body>
</html>
welcome2.jsp
<%@page contentType="text/html"%>
<%@page pageEncoding="UTF-8"%>
<%--
The taglib directive below imports the JSTL library. If you uncomment it,
you must also add the JSTL library to the project. The Add Library... action
on Libraries node in Projects view can be used to add the JSTL 1.1 library.
--%>
<%--
<%@taglib uri="http://java.sun.com/jsp/jstl/core" prefix="c"%>
--%>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
"http://www.w3.org/TR/html4/loose.dtd">
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
<title>JSP Page</title>
</head>
<body>
<%
String val = request.getParameter("name");
session.setAttribute("name", val);
%>
page1
</body>
</html>
welcome.jsp
<html>
<head>
<title>Session Example</title>
</head>
<body>
<center>
<h1>Session Example</h1>
Hello, <%= session.getAttribute("name") %>. Welcome to Page 1!
</body>
</html>
the error i get is iam not able to get the name of the user in third file

welcome1.jsp
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
<title>JSP Page</title>
</head>
<body>
<form action="./welcome2.jsp" method="POST">
please enter ur name <input type="text" name="username" value="" size="20" />
<input type="submit" value="submit" />
<input type="reset" value="cancel" />
</form>
</body>
</html>
welcome2.jsp
<%@page contentType="text/html"%>
<%@page pageEncoding="UTF-8"%>
<%--
The taglib directive below imports the JSTL library. If you uncomment it,
you must also add the JSTL library to the project. The Add Library... action
on Libraries node in Projects view can be used to add the JSTL 1.1 library.
--%>
<%--
<%@taglib uri="http://java.sun.com/jsp/jstl/core" prefix="c"%>
--%>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
"http://www.w3.org/TR/html4/loose.dtd">
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
<title>JSP Page</title>
</head>
<body>
<%
String val = request.getParameter("username");
session.setAttribute("name", val);
%>
Hai <%=request.getParameter("username")%>
<a href="welcome3.jsp"> page1</a>
</body>
</html>
welcome3.jsp
<html>
<head>
<title>Session Example</title>
</head>
<body>
<center>
<h1>Session Example</h1>
Hello, <%= session.getAttribute("name") %>. Welcome to Page 1!
</body>
</html>
i saw your Duck star ***,
you also can see duck assign near by my post topic ***

Help required - frequent hang and slow down in my MBP

Hi,
My MBP get slow down frequently with the colour circle come up and need a few minute to resume and hang again. ANd this hang seem can stop the hold machine even for Force quit and Activity Monitor
And it seem most likely that, if I quite Safari and Mail, it will be much better.
I have used iceclean and get below information in console
21/05/2010 6:03:36 AM ReportCrash[112] Saved crash report for ServerScanner[102] version ??? (???) to /Users/hkpchunghk/Library/Logs/DiagnosticReports/ServerScanner2010-05-21-060335localhost.crash
and below is crash report
Process: ServerScanner [102]
Path: /System/Library/CoreServices/ServerScanner
Identifier: ServerScanner
Version: ??? (???)
Code Type: X86-64 (Native)
Parent Process: launchd [86]
Date/Time: 2010-05-21 06:03:32.427 +0530
OS Version: Mac OS X 10.6.3 (10D573)
Report Version: 6
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Library not loaded: /System/Library/PrivateFrameworks/PlatformHardwareManagement.framework/Versions /A/PlatformHardwareManagement
Referenced from: /System/Library/PrivateFrameworks/ServerFoundation.framework/Versions/A/ServerF oundation
Reason: image not found
You help is much appreciated.
Thanks

If a reboot is clearing some of the problem, you ought to check the capacity and use of your hard disk. How full is this? Anything less than about 20% space may begin to slow things down.
As for the Flash plugin, these do tend to slow Macs down with some sites. You might want to try Click to Flash to restrict the use. And as for CPU use, I saw 120% on a friend's MacBook Pro a couple of days back: too many Facebook games running at the same time.

Help required on 3508 and gigabit copper Please.

Similar Messages

Maybe you are looking for