Help required on drill down ...

I have a report generated on a multiprovider. I run the query to generate the web report on that multiprovider. My problem is If i want to drill down to document level, the data are not tallying before and after drill down.
What are the possible remedies for this ? Hope for an quick reply,
thanking you in advance
D Bret

Dave,
You could try the Analysis Process Designer for the same, that might give you a better picture of your joins.
Also the reason your data might not tally could be because of incorrect joins.
Arun

Similar Messages

  • Drill Down Report in screen painter

    Hi Experts,
    I have a requirement in dialog programming/screen painter to create a 2 level drill down report. for eac page of the report, it should only contain 10 entries then to view the other entries (11 and up), the button for next page should be click (there is also back button).
    First question is how will I have the drill down report (alv list type?) in screen painter?
    Second question is how should I process the logic mentioned above (next and back) in screen painter/dialog programming?
    Thanks in advance for all teh support. Points will be rewarded.
    Cheers,
    Kurtt

    Hai,
    Go thru this Threads u ll get an idea,
    Drill down report help
    Re: regarding Drill Down Reporting
    drill down capabilities for an alv grid display field using oops concept
    Regards,
    Padmam.

  • Drilling down to CLM report from pie chart developed with Xcelsius

    Hi All,
    We have a requirement about drilling down to CLM side report upon clicking on the piece of pie that is developed using Xcelsius.
    1)For Example, below is a pie chart(developed through xcelsius) showing the information about the agreements expiring in certain period. We have placed it on the user workbench.
    Upon clicking on any piece of a pie, it should navigate to the detailed report showing the details of the master agreements.(as below)
    Can anyone please help in achieving this through Xcelsius?
    2)Is it possible to include any URLs in the list view(in Xcelsius), so that we could open the master agreement from it?
    Thanks,
    Vennela

    Well I assume A1, B1 are same reports with filtering on A and B.
    If this is the case make one report and say the filter(A or B) is prompted and when you click in the chart it goes to the report filtered by A or B depends on where you click.

  • Drill Down Charts - Oracle Graphics

    My understanding of drill down chart is when
    you click on the particular chart element in the Master chart the Detail chart should show up.
    But in my situation when I choose run from layout editor in oracle graphics, first the Master chart appears and then it automatically refreshes it with the Detail chart without user intervention. The Master
    chart appears as a minimized window.
    I am passing parameter between the Master chart and the detail chart.
    Could anyone tell me how to solve this
    and get the effect of drill down from
    Master Chart to show up the Detail Chart Please ?
    Thanks
    Mohan

    Hi Pradeep,
    You can careate your own dirlldown chart reports like :
    --Create a report using xtreem sample database
    --Crate two groups like Country & Reagion and use Yearly sales in your charts
    --Place a bar graph on your Country group footer and Region group footer.
    --Use Hide(Drill Down Ok) option for region group footer and suppress all other empty sections.
    --Now try to drill down through Country group to Region group.
    You will have to go through only help documents on drill down options in Crystal.
    You have to create a ODBC connection on server end also copy the xtreem database on your server to run you reports in infoview.
    Yes Crystal Reports 2008 supports multi level drill down.
    Thanks,
    Sastry

  • Drill down option with button

    Hi,
            We have requirement for drill down option ,when i click on the button.
              I have entity dimension in the report as rows,when i click on drill down button, the entity should show children of the parent in the report using VBA or any work around.
    Entity "abc" has b,e,f .. as children.
    In current report
    entity
    time
    abc
    789
    when i Click on "drill down"button, the entity dimension member "abc" should show the children of (b,e,f....), as shown below
    entity
    time
    b
    1
    e
    2
    f
    3
    when I click on "back" button,
    entity
    time
    abc
    789
    Please let me know , how to achieve this functionality in the report using VBA or any work around.
    Thanks in advance

    Hi Vadim,
                   Thanks for the reply, we are actually using the EPMCONTEXTMEMER() for selecting the entity value , after selecting the entity if I do the drill down with the entity values in the report , the entity values are not in relation with the EPMCONTEXTMEMBER() , so how to deal with this situation,Please suggest here.

  • SEARCH OR DRILL DOWN HELP

    Hello all,
    I have a requirement in table control where i have to provide a help for one of the fields in  my table control.
    I have 5 values which that field can take so
    1)can i create a search help or help with those five values so taht the user can select one out 5.
    is it possible
    or should i go for drill down or list box ,so that i can hardcode the 5 values and pass to FM.
    I WAS JUST CURIOUS TO KNOW WHETHER THE SEARCH HELP CAN BE USED TO PROVIDE WITH DEFAULT VALUES AS IN MY CASE.
    THANKS
    deepthi

    Hi Tomasz,
    can you little bit more clear.
    you mean to say i need to give the values in the search help or
    in last tab you can specify those 5 allowed values
    i didnot get this thing
    please let me know
    thanks

  • S_ALR_87012169 R3 FCC 6.0 drill down help (AR account balance)

    Can anyone teach me how to display 87012169 Classic Drill Down Report?  I need check the history data from Oct. 2010 to Feb. 2012 AR transactions.   The Help > Application Help showed "No documentation available", I believe we did not install the help data.
    I tried to use ALR_87012173 for Customer Open Items (the partical payment did not deduct from original invoice) or 87012177 (did not setup the layout yet).
    Thanks,

    Hi PPIO:  I used FBL5N but all partial payment did not deduct from original invoice if you short of 0.01 cent, that is why I am trying other reports from SAP.  How you retrieve data and create your customized reports in R3?  We will implement BW in April 2012 but do we need any report tool to create our own reports? 
    Our internal SAP administrator told me the FBL5N can NOT display correct balance due that is can not do task.  I can not believe it, Can you teach me why we got incorrect balance due and what caused the problem?  Tks.

  • Need help with Group Headings and showing them on drill down.

    Hi all:
    I think this is a simple question and feel that I should already know the answer but for some reason it eludes me.  What I would like to know is the proper way to hide/display group headings and have them show up on drill down BUT not repeat on each group header.
    What I have for grouping is as follows:
    Group Header #1 u2013 Sales Rep
      Group Header #2 u2013 Customer
        Group Header #3 u2013 Product Class
          Group Header #4 u2013 Stock Code
            Details
          Group Footer #4 u2013 summary calculated on this line
        Group Footer #3  u2013 summary calculated on this line
      Group Footer #2 u2013 summary calculated on this line
    Group Footer #1 u2013 summary calculated on this line
    My goal is to have my report show only the lines listed below by default and allow the user to drill down group by group to the details section:
    Group Header #1 u2013 Sales Rep
      Group Footer #2 u2013 summary calculated on this line
    Group Footer #1 u2013 summary calculated on this line
    If anyone could offer any help it would be greatly appreciated!
    Thanks,
    FatMan

    click section expert, then for example of GH3, highlight it, then click on the formula box for suppression, and put in the code....
    Drilldowngrouplevel < 3
    The result will be that this GH3 is suppressed whenever the report is showing GH1 and 2 but not 3.
    In addition to this, you must Hide(Drill-down ok) GH3. This is also done in the section expert.
    Then just do the same for GF3, and for GH4/GF4 make sure you use...
    Drilldowngrouplevel < 4

  • Crystal Help for drill down

    I am trying to figure out what I have wrong... The below formula allows me to drill down (little yellow arrow beside my doc type column) and see journal entries, and incoming payments, but I get errors for Credit Memos and Invoices.
    Both the Doc Type and Doc # are string fields so it should be working......
    So can anyone give me some help as to why it works for two of the four ?
    THANKS
    Select {Command.Doc Type}
    Case "AR Invoice":'http://$b1$/link?table=OINV&key='+ {Command.Doc #}
    Case "AR Credit Memo":'http://$b1$/link?table=ORIN&key='+{Command.Doc #}
    Case "Incoming Payment":'http://$b1$/link?table=ORCT&key='+{Command.Doc #}
    Default: 'http://$b1$/link?table=OJDT&key='+{Command.Doc #}

    Hi Dayton
    The drilldown needs the docentry  rather than docnum so you may need to add this field to your command as an extra field if it is not already there.  It does not need to be printed.
    Once you gave the docentry set up the formula as
    'http://$b1$/link?table=OINV&key=' & totext({Command.DocEntry},0,u201Du201D,u201Du201D)
    so that any decimals, separators etc are removed.
    Hope this helps
    Rob

  • How to add the required characterists and key figures to drill down report?

    hi,
    i am creating a drill down report using t.code FKI4. however i noticed that some of the characteristics and key figures required by me is not listed in the report catalog. how can i add the required characteristis and key figures to the report catalog?

    Hi Inna,
    Based on my research, a drilldown report is a layout design that at first hides complexity and enables the user to toggle conditionally hidden report items to control how much detail data they want to see. Drilldown reports are used to change the report
    layout interactively. So it wouldn’t affect the rows displayed in the outmost group. Though some rows are hidden when the report is initially run, it will still count them. This is by design.
    Furthermore, if I understand correctly, you also expect the outmost group is a dynamic group depends on the drilldown action, right? As per my understanding, this function still cannot be achieved at this moment.
    Thanks for your understanding.
    Regards,
    Katherine Xiong
    If you have any feedback on our support, please click
    here.
    Katherine Xiong
    TechNet Community Support

  • Please help me on the data selection - drill down

    Can any one please help me,
    I'm struggling with the data selection. I trid to finding the solution all the way but no hopes.
    see below are my data sets:
    1) from this table i have to plot piechart.
    Division Name                   Percentage
    AMESA                            1.79%
    ANZ                            1.79%
    Central                            5.36%
    Commercial                            8.93%
    Eastern Europe                   1.79%
    Greater China                     3.57%
    Italy                           10.71%
    Japan                            35.71%
    Latin America     12.50%
    Mid Atlantic/South     1.79%
    Northeast                           3.57%
    NY/NJ                           1.79%
    SE Asia                           7.14%
    TME                           3.57%
    2) this below table is having the data same as "diivsion" above and their coerponding "Product" with its counts.
    Here i want plot the bar chart with product and its counts. and also this chart should display only the products for the division selection above.
    I mean that, when the users clicks the particular "division" then the coreponding "products" should only be displayed on the bar chart.
    Division Name     Product                 Escalations
    AMESA                          CLARiiON                          1
    ANZ                 Replication Manager     1
    Central                    ControlCenter                          1
                         Open Replicator                          1
                                Symmetrix                          1
    Commercial                             CLARiiON     
                                 Disk Library                    2
                                 Celerra                         1
                                 PowerPath                         1
                                 Symmetrix                          1
    Eastern Europe         Celerra                     1
    Greater China         CLARiiON     
                               RecoverPoint     1
                                   Symmetrix     1
    Italy                               CLARiiON                          2
                                 Disk Library     1
                               Invista                         1
                                Networker                         1
                              RecoverPoint                         1
    Japan                        PowerPath     
                            CLARiiON                         5
                            Disk Library                          3
                            Symmetrix                 3
                             Celerra                         2
                    Replication Manager                  2
                         Avamar                      1
                           Centera                      1
                          Connectrix                       1
                            ControlCenter                       1
    I can't try using dynamic visibility with the pie chart and bar chart. because my dashboard is having multiple tabs so i want to use the dynamic visibility there.
    any help appreciated.
    Thanks,
    rdc422
    Edited by: rdc422 on Aug 24, 2009 12:18 PM

    Radha,
    Looks like you are still facing problem with dynamic visibility, i had sent the xlf file to your email.
    I created drill down for
    Japan
    Commercial
    Central
    Similarly you can do it for others.
    -Anil

  • Required funnel with drill down

    Experts,
    Any sample example of Funnel Chart with drill down option available in Jdev 11.x ?
    thnks.

    Hi user 552235...
    I am not sure if my next post will help you, since I am not working with portal, but I had a problem with drill to link in the same disco version (10.1.2.48.18) and the problem solved after applying patch 5507746 for bug 5475467.
    You can read more in metalink with the number I supplied you and try in a test environment of course...
    Hope this will help you solving your problem, if it does please update the thread for the rest of our community...
    Gidi Halamish

  • Drill Down Report on Web (Help Most Most Urgently)

    We are developing Drill Down Reports in Oracle Report 6i using button.But for the web it is treating button as image no an action taking object. I want to call another report (Drill Down Report) on regarding perticular row. And please help to call form finally with the help of button or any object in Report.
    Please help me Urgently.
    Thanks in Advance.

    in the format trigger for the button use something like :
    srw.set_hyperlink('http://servername/dev60cgi/rwcgi60.exe?run+report=drill2+userid=scott/tiger+destype=cache+desformat=htmlcss+server=rep60+p1='&#0124; &#0124;:deptno);
    null

  • Drill Down Charts - Please Help

    I am on version 4.0.1.00.03 and I have a flash chart stacked 3d colum that is displaying a yearly count by category of issues. The page also includes an item as a select list that allows you to choose the year you'd like to see. This works great. I can change the year and the chart changes correctly. Now when I go to drill down on a specific category to show the monthly count for the given category selected. I can't get the chart to show up as the year isn't coming in the url as expected. The category id does appear. I've tried everything I can think of but can not seem to get this. Any assistance would be greatly appreciated! :)
    f?p=111:57:3034438413069645::NO:RP:P57_YEAR,P57_CATEGORY_ID:%26P57_YEAR,141

    Hi "790176" (please update your profile with a name, thanks),
    Based upon the LINK you have provided, it would appear that you are referencing the select list item as &P57_YEAR. If you reference your item as :P57_YEAR instead, and concatenate its value to the URL, then your drill-down link should work. Your LINK column in the first chart query should look something similar to the following:
    SELECT 'f?p=111:57:&SESSION.::NO:RP:P57_YEAR,P57_CATEGORY_ID:'||:P57_YEAR||',14' LINK, ....You may find it useful to refer to one of my map samples - http://apex.oracle.com/pls/apex/f?p=36648:33 - where clicking on a map section will drill down to a report. It's the same concept as linking down to another chart, you just need to have a correctly formatted URL. I hope this helps.
    Regards,
    Hilary

  • Drill down report help

    Hi Friends,
    Im creating a drill down report in which i'm displaying a list of transport requests. When I double click on the transport request number it should take me to SE01 transaction. Im using call transaction command to get there. But  dont have any parameter id to display that particular transport number. Could somebody help me with this.
    Thanks,
    Kiran.

    hi,
    use PID <b>KOR</b>
    compare fm  TR_POPUP_INPUT_REQUEST.
    A.
    Message was edited by:
            Andreas Mann

Maybe you are looking for