Help required on form pool
Hi Friends,
i ahve one formpool, in that some user exits are missing.
pls tell me where can i see the existing functionpool i.e transaction code.
pls tell me what is exactly funaction pool means?
Regards
Jagadeeshwar.B
Hi
Go through the link given below :
http://help.sap.com/saphelp_nw04/helpdata/en/9f/9983c8748f11d295c80000e82de14a/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/5b/ae38454b8611d182ba0000e829fbfe/frameset.htm
With Regards
Nikunj Shah
Similar Messages
-
Urgent HELP required on forming the Matrix of data using PL/SQL
Hi All,
I'm new to this thread and require your urgent help in this regard.
I've got a requirement for building a 5000 X 5000 matrix using PL/SQL. My original data tables have 5000 rows each and I need to do a correlation analysis using this data and need to store in a physical table and not in-memory. Is this feat achievable using mere PL/SQL? I understand that Oracle DB has a limitation of 1000 columns(but not sure) and hence I'd like to know whether there is any work-around for such scenarios. If not, what are the other alternative method(s) to achieve this feat? Do I need to use any 3rd party tools to get this done? An early reply from the experts is highly appreciated.
Thanking you all Gurus in advance.
Rgds
SaiWelcome to OTN!
I'll get to your quesiton in a moment, but first some welcome information. Many OTN posters consider it impolite to mark threads as "urgent". We are volunteers and have jobs of our own to do without people we don't know making demands. You are brand new and deserve some patience but please understand this. It is very likely before I finish this post someone will complain about the word "urgent" in your subject.
On to more interesting things :)
You can do the matrix, but are out of luck with a 5000 x 5000 table because Oracle only allows 1000 columns per table. There are ways to work around this.
How do do the matrix depends on what you want to do. You can do this different ways. You can create a table beforehand and use PL/SQL or simple SQL to populate it, or use the CREATE TABLE AS syntax to create and populate it in one step if you can get the underlying SQL to work the way you want, something like
create table my_table as
select a.*, b.*
from table1 a, table2 bcan populate a matrix from 2 tables with an intentional cartesian join (the WHERE clause was left out intentionally, provided your data is already in the data base.
If not you can use a PL/SQL routine to populate the data.
There are a couple of ways to solve the 1000 column limit. The easiest way might be to have 5 collections of 1000 columns each. A more complicated but more elegant soltion would be to have nested collections, allowing 2 colliections that you can loop through - a collection of collections. Nested collections can be hard to work with. A third way would be to use nested tables in the database but I personally do not like them and the insert, update, and delete statements for nested tables are hard to use.
I'm not going to give a code example because I am not sure which solution is best for you. If you have further questions post them. -
hello,
i have just downloaded oracle 10g softwares ...
i installed database then developer suite ... everything was fine ... until i was unable to run forms ...
a friend of mine told me that i need to install application server in order to run forms ...
1st of all i want to know that is there any way i can run forms without using Oracle AS 10g ...
2ndly i m facing problems in installation of Oracle AS 10g ...
i have studied online documentation but it ain't so helpfull for me ...
it seems like ... i have to install "Oracle AS infrastructure" first and then "Middle-tier: Business Intelligence and forms" ...
i m using P-IV (AMD Athlon XP 2100+, MMX, 1.7GHz Processor) with 512 MB DD RAM and Windows XP Professional with Service Pack 2 as Operating System.
During installation, the installer is warning dat only "Oracle Application Server (J2EE and Web Cache)" and "Oracle Application Server Developer Kits" are supported installations on dis platform ...
what should i do ... urgent help required ...
regards,
yasir ([email protected])@ brusardl and rkogelhe
thanx for replying ...
brusardl
i didn't changed da port while installing Oracle AS ...
inspite i stopped all services using/listening from dat port ...
now ... i guess there has been some conflict ... as database listner stops automatically just after starting !!!
rkogelhe
can u plz tell me what is BI version of Forms ...
and can i view forms running on web without installing Oracle AS with OC4J bundled in Forms ???
Another Problem:
I re-installed Database, Developer suite and then Oracle AS infrastructure ...
everthing went fine ...
when i installed Oracle AS Middle Tier - Business Intelligence & Forms
during installation ... some configuration assistants failed/skipped ...
da OC4J configration assistant at 5th last position failed ... so remaining 4 configuration assistants were skipped ...
at da end it said ... Installation Succesfull but with some configuration assistants failed/skipped ...
is dis a installation useless ... can i fix dis ?
regards,
yasir -
Hi
Im from another country and ive lost the answers to my security questions. Help required
ThanksYou need to contact Apple, either as described in that article or by filling out and submitting this form.
(90034) -
Help to Configure Connection Pool For Jdeveloper
Hi ,
I am using Jdeveloper 10.1.2 and Oravle AS 10.1.2.
Language Used : J2EE,Struts and EJB
I am portletizing struts application.
I need help to configure Connection pool. By default it is taking a datasource.xml not the one i had defined. Pls help me out. Affecting the performance due to so many hit to db.
regards,
Jayashree JeganHi John,
Go through this thread of mine. You will get the required information to setup the connection pool.
SOAP adapter: WSDL issue
Also just check in Visual Studio Help .NET Connector for Connection Config class settings. You will see all the relevent parameters related with connection pool.
Regards. -
XSLT mapping Help Required.
XSLT mapping Help Required.
Hi Experts,
I am New to XSLT Mapping. I am practising the below Example:
InputXML File:
<?xml version="1.0" encoding="UTF-8"?>
<?xml-stylesheet type="text/xsl" href="Persons111.xsl"?>
<ns0:MT_XSLT_Source xmlns:ns0="http://XYZ.com/gen">
<Person>
<FirstName>Anshul</FirstName>
<LastName>Chowdhary</LastName>
<Gender>Male</Gender>
<Address>
<Street>2nd Main</Street>
<Houseno>83/b</Houseno>
<City>Mysore</City>
</Address> </Person>
</ns0:MT_XSLT_Source>
XSL StyleSheet File:
<?xml version='1.0' encoding="UTF-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:ns0="http://XYZ.com/Gen"
Xmlns:ns1=”http://XYZ.com/Test”>
<xsl:template match="/">
<ns1:MT_XSLT_Target>
<Title> <xsl:value-of select="ns0:MT_XSLT_Source/Person/Gender"/> </Title>
<Name> <xsl:value-of select="concat(concat(ns0:MT_XSLT_Source/Person/FirstName,' '), ns0:MT_XSLT_Source/Person/LastName)"/>
</Name>
<Street> <xsl:value-of select="concat(concat(ns0:Mt_XSLT_Source/Person/Address/Houseno,' '),
ns0:Mt_XSLT_Source/Person/Address/Street)"/> </Street>
<City> <xsl:value-of select="ns0:Mt_XSLT_Source/Person/Address/City"/> </City>
</ns1:MT_XSLT_Target>
</xsl:template>
</xsl:stylesheet>
The Desired Output shuold be:
<?xml version="1.0" encoding="UTF-8"?>
<ns1:MT_XSLT_Target xmlns:ns1="http://XYZ.com/Test">
<Title>Male</Title>
<Name>Anshul Chowdhary</Name>
<Street>83/b 2nd Main</Street>
<City>Mysore</City>
</ns1:MT_XSLT_Target>
I have refered the xsl in xml and i am getting the below Oupt in a Single line like this:
Anshul Chowdhary Male 2nd Main 83/b Mysore
I am Unable to display in Target XML Fomrat as shown above. Please check and do the needful.
Regards,
GIRIDHARHi,
I have used below for testing.
Input xml:
<?xml version="1.0" encoding="UTF-8"?>
<?xml-stylesheet type="text/xsl" href="Persons111.xsl"?>
<ns0:MT_XSLT_Source xmlns:ns0="http://XYZ.com/gen">
<Person>
<FirstName>Anshul</FirstName>
<LastName>Chowdhary</LastName>
<Gender>Male</Gender>
<Address>
<Street>2nd Main</Street>
<Houseno>83/b</Houseno>
<City>Mysore</City>
</Address> </Person>
</ns0:MT_XSLT_Source>
xsl code:
<?xml version='1.0' encoding="UTF-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:ns0="http://XYZ.com/gen"
xmlns:ns1="http://XYZ.com/Test">
<xsl:output method="xml" version="1.0" encoding="UTF-8" indent="yes"/>
<xsl:template match="/">
<ns1:MT_XSLT_Target>
<Title> <xsl:value-of select="ns0:MT_XSLT_Source/Person/Gender"/> </Title>
<Name> <xsl:value-of select="concat(concat(ns0:MT_XSLT_Source/Person/FirstName,' '), ns0:MT_XSLT_Source/Person/LastName)"/>
</Name>
<Street> <xsl:value-of select="concat(concat(/ns0:MT_XSLT_Source/Person/Address/Houseno,' '),
/ns0:MT_XSLT_Source/Person/Address/Street)"/> </Street>
<City> <xsl:value-of select="/ns0:MT_XSLT_Source/Person/Address/City"/> </City>
</ns1:MT_XSLT_Target>
</xsl:template>
</xsl:stylesheet>
For testing in PI ,change the extension from .txt to .xsl and zip it and upload into PI as an imported archive .
Regards
Venkat -
Urgent help required: Query regarding LC Variables
Hi All
Sometime earlier I was working on a performance issue raised by a customer. It was shell script that was taking almost 8-9 hrs to complete. During my research I came across a fact that there were some variables which were not set, the LC variables were impacting the sort funnel operations because of which the script was taking a long time to execute.
I asked them to export the following commands, after which the program went on smoothly and finished in a couple of mins:
export LC_COLLATE=en_US.ISO8859-1
export LC_MESSAGES=C
export LC_MONETARY=en_US.ISO8859-1
export LC_MONETARY=en_US.ISO8859-1
export HZ=100
export LC_CTYPE=en_US.ISO8859-1
export LANG=en_US.UTF-8
Later I did recover that setting the LC_COLLATE to C, is not helping and the program was again taking a lot of time. Few questions that I want to ask are:
1. Can someone please tell me, what each of these variable mean and how these values make a difference.
2. When I exported LC_COLLATE=en_US.ISO8859-1, it worked fine, but when i tried with the defalut value LC_COLLATE=C, then why the program didnt work.
As this issue is still going on, hence I would request All to provide their valuable inputs and let me know as much as possible.
Appreciate your help in this regard.
Thanks
Amit
Hi All
A new development in this regard. The customer has send us a screen shot in which they were trying to export the locale variable using the commands which I have pasted above. I can see in the screen shot that while exporting LC_COLLATE and LC_TYPE, they get a message that ""ksh: export: couldn't set locale correctly"".
Request everyone to please give their inputs as it's a bit urgent.
Thanks for all the help in advance.
Thanks
Amit
Some help required please...
Edited by: amitsinhaengg on Jul 22, 2009 2:03 AM
Edited by: amitsinhaengg on Jul 22, 2009 2:06 AMLC_CTYPE
Controls the behavior of character handling functions.
LC_TIME
Specifies date and time formats, including month names, days of the week, and common full and abbreviated representations.
LC_MONETARY
Specifies monetary formats, including the currency symbol for the locale, thousands separator, sign position, the number of fractional digits, and so forth.
LC_NUMERIC
Specifies the decimal delimiter (or radix character), the thousands separator, and the grouping.
LC_COLLATE
Specifies a collation order and regular expression definition for the locale.
LC_MESSAGES
Specifies the language in which the localized messages are written, and affirmative and negative responses of the locale (yes and no strings and expressions).
You can use command
# locale -k LC_CTYPE
to see more detail about each type. -
Help required - Sales order item is partially delivered but the item grayed
I have a sales order 123 having say item10 with qty 1, item20 with qty 10 , item 30 qty 12
Item 1 confirmed qty 1 and delivered qty is 1
Item 2 confirmed qty 10 and delivered qty 10
Item 3 confirmed qty 1 and delivered qty is 1
Now the item3 still has open requirements of 11 to be delivered. But the item is GRAYED OUT already.
even if I do ATP the qty is not confirming for the remaining 11 pieces.
Why is that? How to make that item out from GRAY.
How to confirm the remaining 11 qty for that item.
Help required as early as possible.
Appreciate ur help guys
Radhahi Radha, how are you ?
---the partial deliveries in master data must have not been mentioned.
---the deliveries should be upto target quantity.
---check order type, item category and schedule line category.
---check unrestricted stock availability.
thank you
regards
Khera. -
Calling search helps dynamically in module pool program
Hi Experts,
I have created two search helps. I need to call these search helps in my module pool program dynamically for a single field (i.e ZMATNR).
you might be known... if it is a single search help, we can assign that in field attributes.
But here... I need to call different search helps for a single field based on the condition.
Pls help me.
Thanks
RaghuHi,
Use the below function module and pass the search help created in search help field according to the condition.
Process on Value-request.
if condition = A.
call function " F4IF_FIELD_VALUE_REQUEST"
TABNAME =
FIELDNAME =
SEARCHHELP = "Mention search help created
Elseif Conditon =B.
call function " F4IF_FIELD_VALUE_REQUEST"
TABNAME =
FIELDNAME =
SEARCHHELP = "Mention search help created
Endif.
Regards,
Prabhudas -
Search Help with in a serach help required in SRM 4.0
Hi,
Requirement: Search help required for Product Category field in the Search help for Product(BBPH_PRODUCT) in SRM portal.
This search help is used in Create shopping Cart transaction. The hyper link on Internal Goods/Services leads to the search help BBPH_PRODUCT.
My analysis:
The field Product Category (CATEGORY_ID) has search help(COM_CAT_HIER) attached to its data element. When I single test the search help BBPH_PRODUCT in SAP GUI,I can see the search help for field product category in the selection dialogue box. However the same does not appear on the corresponding screen in HTML.
Please let me know whether I need to do some thing to make the search help appear on the HTML screen?
With Regards,
Prakash KamathHi Prakash,
I have the same problem but with another field. Unloading point. Could you please tell me how did you solve this problem with displaying F4 help on html/ SRM portal?
Thank you very much.
Best regards,
Danijela ZIvanovic -
Help required with Photoshop Elements 4.0 this has been installed on my new Toshiba laptop with windows 8.1 for some 18 months and operating well. Now it will not open, message pops up saying “attempt to access invalid address” then “application not responding” Suggestions how to access would be much appreciated. Tks. Stuart
What is the size of your hard disk? PSE 4 is a very old program and I suspect it is not able to access the entire hard disk on your machine. Just a thought here.
-
Help require with installing Adobe Acrobat onto my Macbook Pro Retina.
Help require with installing Adobe Acrobat onto my Macbook Pro Retina.
I have successfully installed all of my creative cloud apps with the exception being acrobat.
I cannot print from Indesign to PDF.
I have unistalled, reinstalled and still no Adobe Acrobat.
I now have to go back to Windows 8 and create the PDF's there.
Any one know how to get around this issue?
Thanks in advance
KelvinOSX has effectively killed the ability to print to pdf, (print to pdf eliminates most of the "Rich features" of current pdf).
Export from InDesign, always, excpet for the 1% of the time where you know why print to pdf would produce a better result. -
How to add Help in a Form?
I want to add help in my forms application.
Is it possible to add customized help in a form under Help Menu ?
Can anybody 'help' me in this regard :)
It will be a great favour !Thanks
But I don't think winhelp will work for web based application.
Do I have to use html format help.
or any other better solution for web based app using form server?
null -
Help required in Weblogic 6 - Creation & Configuration of Web Application
Forum Home > Enterprise JavaBeans[tm]
Topic: Help required in Weblogic 6 - Creation & Configuration of Web Application
Duke Dollars
2 Duke Dollars assigned to this topic. Reward the best responses to your question
using the icons below, or transfer additional Duke Dollars to this topic.
Welcome moinshariff!
Watching this topic.
Previous Topic Next Topic
This topic has 1 reply on 1 page (Most recent message: Jan 23, 2002 1:05 AM)
Author: moinshariff Jan 22, 2002 4:55 AM
Hi,
I am using Weblogic 6. I have created a new Web
Application called Web (I have not used the DefaultWebApp_myserver).
And I have the following settings:
Name : Web
URI : Web
and Path : C:\Web
and placed my JSP files under c:\Web\
I am able to access the first page, but after that I am not able to access the
second page.
I get "Error 404--Not Found" on the browser. Basically the class file is not getting
created under /Web-inf/_tmp_war_myserver_myserver_Web/jsp_servlet/ folder .
I tried a work around for this. I copied all my files under one more folder called
web and placed this under C:\Web
The it works. Now I have 2 copied off all the files, 1 copy under c:\web and another
copy under c:\web\web\.
If I have the files under DefaultWebApp_myserver and have the setting as
Name: DefaultWebApp_myserver
URI: DefaultWebApp_myserver
Path: .\config\mydomain\applications
everything works fine.
Can any one please let me know if there is any configuration which has to be done
so that I do not duplicate the code in 2 directories
Thanks in advance.
Regards,
MoinForum Home > Enterprise JavaBeans[tm]
Topic: Help required in Weblogic 6 - Creation & Configuration of Web Application
Duke Dollars
2 Duke Dollars assigned to this topic. Reward the best responses to your question
using the icons below, or transfer additional Duke Dollars to this topic.
Welcome moinshariff!
Watching this topic.
Previous Topic Next Topic
This topic has 1 reply on 1 page (Most recent message: Jan 23, 2002 1:05 AM)
Author: moinshariff Jan 22, 2002 4:55 AM
Hi,
I am using Weblogic 6. I have created a new Web
Application called Web (I have not used the DefaultWebApp_myserver).
And I have the following settings:
Name : Web
URI : Web
and Path : C:\Web
and placed my JSP files under c:\Web\
I am able to access the first page, but after that I am not able to access the
second page.
I get "Error 404--Not Found" on the browser. Basically the class file is not getting
created under /Web-inf/_tmp_war_myserver_myserver_Web/jsp_servlet/ folder .
I tried a work around for this. I copied all my files under one more folder called
web and placed this under C:\Web
The it works. Now I have 2 copied off all the files, 1 copy under c:\web and another
copy under c:\web\web\.
If I have the files under DefaultWebApp_myserver and have the setting as
Name: DefaultWebApp_myserver
URI: DefaultWebApp_myserver
Path: .\config\mydomain\applications
everything works fine.
Can any one please let me know if there is any configuration which has to be done
so that I do not duplicate the code in 2 directories
Thanks in advance.
Regards,
Moin -
Help required network configuration - Gateway route settings get erased on reboot.
Oracle Linux 7
Linux myhostname 3.8.13-35.3.1.el7uek.x86_64 #2 SMP Wed Jun 25 15:27:43 PDT 2014 x86_64 x86_64 x86_64 GNU/Linux
#cat /etc/sysconfig/network-scripts/ifcfg-eno16780032
TYPE="Ethernet"
BOOTPROTO="none"
DEFROUTE="yes"
IPV4_FAILURE_FATAL="no"
IPV6INIT="yes"
IPV6_AUTOCONF="yes"
IPV6_DEFROUTE="yes"
IPV6_FAILURE_FATAL="no"
NAME="eno16780032"
UUID="2d1107e3-8bd9-49b1-b726-701c56dc368b"
ONBOOT="yes"
IPADDR0="34.36.140.86"
PREFIX0="22"
GATEWAY0="34.36.143.254"
DNS1="34.36.132.1"
DNS2="34.34.132.1"
DOMAIN="corp.halliburton.com"
HWADDR="00:50:56:AC:3F:F9"
IPV6_PEERDNS="yes"
IPV6_PEERROUTES="yes"
NM_CONTROLLED="no"
#route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
0.0.0.0 34.36.143.254 0.0.0.0 UG 0 0 0 eno16780032
34.36.140.0 0.0.0.0 255.255.252.0 U 0 0 0 eno16780032
169.254.0.0 0.0.0.0 255.255.0.0 U 1002 0 0 eno16780032
When I reboot the machine, the first line in route table gets erased, I then run:
#route add default gw 34.36.143.254
After which network works fine.
Help required. I don't want to use NetworkManager.The following might be useful:
https://access.redhat.com/solutions/783533
"When transitioning from NetworkManager to using the network initscript, the default gateway parameter in the interface's ifcfg file will be depicted as 'GATEWAY0'. In order for the ifcfg file to be compatible with the network initscript, this parameter must be renamed to 'GATEWAY'. This limitation will be addressed in an upcoming release of RHEL7."
NetworkManager is now the default mechanism for RHEL 7. Personally I don't quite understand this, because as far as I can gather it is a program for systems to automatically detect and connect to known networks. I think such functionality can be useful when switching between wireless and wired networks, but for a server platform, I wonder.
Maybe you are looking for
-
MySQL and Java - getting program to work
I am setting up mysql to run sql from a Java program on my pc at home and probably biting off more than I can chew. I get these messages when executing the java program ExecuteSQL.java: Exception in thread "main" java.lang.NoClassDefFoundError: Test2
-
Alerts in Satelite System configured in Solman sometimes will get inactive
I want to setup some alerts for a satellite system into solution monitoring, after the activation of some alerts, we have some problems . For example I have activated into alerts server--> Setup Monitoring --> Cpu utilization When I want to check th
-
iPhoto Slideshow: Sometimes the slideshow starts at the last image, rather than the first. How do I ensure the slideshow commences at the first image?
-
Save for Web – Image Size Preview doesn't update
If I use percentage to change a JPG output size the preview either lags (regardless the size/weight of the image) or simply ignores the new value, forcing me to click on the Width/Height field to complete the action. It would be nice to kill the bug!
-
Integrity check fails on column key
Dear DBA's, I am getting error while creating encrypted tablespace "ORA-S8342: Integrity check fails on column key" actually i am trying to work on Wallet, I created wallet key without auto login option initially and i created the tablespaces, user a