Help required on MSCA and WMS - Mobile Application

Hi all
I need to make some changes in MSCA - mobile application. As I am new to mobile applications.. I would like to know how can we get the page details of the menu or the page to get the exact filename which is being referred. This is so that I can download and make changes to the same file.
Regards
Ali

Hi Aliv,
The Oracle Whitepaper "Customization of Oracle Mobile Supply Chain
Applications and Oracle Warehouse Management System" suggests how an
application developer or consultant could customize the mobile pages to
provide a specific look and feel to the customer or to support a company's
specific business logic. This is available on Metalink here
@ https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_databa
se_id=NOT&p_id=301926.1
The "Advanced Barcode Strategies" White paper may also be a useful source of
information. This provides details on out of order scanning and custom scan
capabilities This is available on metalink here:
@ https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_databa
se_id=NOT&p_id=297992.1

Similar Messages

  • MSCA and MWA Mobile Applications Customization

    I am trying to add new business logic on CycleCountPage in MWA (Whse Mgmt Responsibility).
    I copied some .class files from the server and de-compile all of them and save the new files with CustomFileName.java
    Then change the classes’ code to meet the new file names and add my new logic in the following files
    •     Function     CustomCycleCountFunction.java
    •     Page          CustomCycleCountPage.java, CustomLotSerialPage.java
    •     Field          CustomItemLOV.java
    •     Listener      CustomCycleCountFListener.java
    Then I successfully compiled the new classes on the server using javac and generate the new .class files in the same original file’s folders
    And change the .class files attributes to 755.
    Then I added a new function and add it to the menu to run the new function class
    It appears in the menu but it gives me
    Unexpected error o >
    It seems that the application couldn’t read the new function class file
    Please tell me where to copy the new classes and what are the needed steps to run the new function.

    Shiv,
    I am talking about WMS/MSCA mobile customization white paper, for OAFramework mobile development we can use the OAF Dev guide.(there are few restrictions).
    The Oracle Whitepaper "Customization of Oracle Mobile Supply Chain
    Applications and Oracle Warehouse Management System" suggests how an
    application developer or consultant could customize the mobile pages to
    provide a specific look and feel to the customer or to support a company's
    specific business logic. This is available on Metalink here
    @ https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_databa
    se_id=NOT&p_id=301926.1
    The "Advanced Barcode Strategies" White paper may also be a useful source of
    information. This provides details on out of order scanning and custom scan
    capabilities This is available on metalink here:
    @ https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_databa
    se_id=NOT&p_id=297992.1

  • Help required in  webclient and crm report integration

    Hi ,
    how to integrate webclient and CRM reports in CRM 2007 UI.
    i dont have much idea in this area.My requirement is integrating CRM report and webclient.But i dont know where to find report adn how to link the report to webclient.
    Please anyone help me.
    Thanks in advance
    geetha,

    Hi Geetha,
    Create new CRM business role by copying standard SERVICEPRO or SALESPRO
    Even u can assign business roles SERVICEPRO or SALESPRO  to Oraganization units.
    Goto Org assginement and assign these business roles (Goto-Detail Object-click on business roles (Z or standard)-Save it.
    Assign your BP to org position
    Execute transaction code BSP_WD_CMPWB
    Enter CRM_UI_FRAME in test application and click on execute.
    select the profile -Left side menu you will find the standard reports.
    Regards
    Shanmuga
    Please let me know my inputs help you to find the report.

  • Help required in writing And Reading Xml From Database

    Hi
    i m new to java.
    i m facing problem while writing Xml file from Mysql Database in java i m using the WebRowSet
    and also for Reading WebRowSet
    after reading the Xml i have to save this in Database
    (required source code)
    is there any one to help me in this way
    regards
    aamir

    shadab_think_globally wrote:
    {noformat}*hi everybody,
    please send me a ajax with jsp application
    suppose i enter a word in text area ajax will populate/suggest all string from database ,who started
    from that entering character(s).like a google string search.
    please send full source code
    *{noformat}how about you do it yourself?

  • Help required for slicing and merging file

    Hi,
    I am working on p2p downloading application based on Gnutella. Right now i am trying to implement downlaoding one file from many hosts at a time(like limewire does). i am able to connect to multiple host. but dont know how to downlaod and merge file for his purpose.
    i know how to download one file from single host. but dont know how to handle file coming from multiple hosts.
    if anyone having knowledge, please tell as soon as possble.

    Hi.
    thanks for the reply. Actually i had something same
    in my mind. but unfortunately i am quite week in
    serializtion and file stuff. If you could provide me
    with code snipet for this, or can just simulate in a
    fewer lines of code, it would be a great help for
    me...i have too much short time...
    i think i really have to study this file
    stuff..........You shouldn't use serialization. Just invent a protocol, and "normal" binary data.
    Kaj

  • Help required with DAQ and waveform generation

    Hi,
    I'm using DAQ 6024E card for waveform acquisition using LabVIEW 8.2 version. I've also attached my vi for your reference.
    My next step is , I want to add another waveform to the acquired waveform, i.e. I mean to say if the acquired waveform is a sine wave with 60 Hz frequency and amplitude of 8V peak-to-peak, I want to finally display a wave which is 8V peak-to-peak with sinusoidally changing freuency.
    To be more clear...I want a sine wave with frequency =  60 Hz + 1*sin( 2*pie**t).
    As cane bveen seen in my vi, I can extract the phase and magnitude of the original acquired signal.
    Can anyone help me out with this...as I'm not able to figureout how should I proceed next.
    Looking forward to hear soon,
    Regards,
    Rohit
    Attachments:
    test_analog.vi ‏162 KB

    You'd probably want to use the DAQmx VI's instead of the Express VIs, when doing something more exotic. You can start by converting the existing Express VIs to code by opening their front panels and saving them as a VI.
    Regards,
    André
    Using whatever version of LV the customer requires. (LV5.1-LV2012) (www.carya.nl)

  • Deatil Help required on  OVS and Sample code

    Hi All,
    I am not able to understand the OVS(Object Value Selector) which is given in the help.
    If any one who worked on this, please give a sample  source code or give detail help( Step by Step).
    Thanks
    Ravi

    Ravi,
    Did you check <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/developerareas/webdynpro?rid=/library/uuid/49f2ea90-0201-0010-ce8e-de18b94aee2d">web Dynpro Sample Applications and Tutorials</a>?
    Namely, <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/downloaditem?rid=/library/uuid/5dcbe990-0201-0010-2c99-a2bc9e61acfc">advanced Value Help: Object Value Selector (9)</a>.
    Valery Sialev
    EPAM Systems
    http://www.NetWeaverTeam.com

  • Oracle MSCA and WMS

    Hello,
    This is on r12.1.3
    Is it mandatory to purchase Oracle WMS with  MSCA?    Can we leverage MSCA functionality for bar code scanning and labelling without having Oracle WMS?
    Please advise.
    Darsh

    Dear Pankaj,
    Inventory is a separate License...you cannot officially use MSCA by default when you purchase inventory license.
    MSCA license needs to be bought separately.
    So basically there are 3 flavors:
    1. Pure Inventory
    2. Inventory + MSCA
    3. Inventory + WMS (WMS includes MSCA license)
    However we definitely cannot have WMS without MSCA.
    Hope it clarifies.
    Thanks,
    Hrishi

  • Help required: class assignment and values for functional location

    Hi All,
    My requirement is to get classification data for a functional location as in IL03.
    Can any one let me know where in the standard program are they getting the assigned classes
    and class values. So that I can use the same logic.
    Thanks.

    FM BAPI_OBJCL_GETDETAIL
    OBJECTKEY                       ?0100000000000011643
    OBJECTTABLE                     IFLOT              
    CLASSNUM                        ZPMI_BLDG          
    CLASSTYPE                       003                
    KEYDATE                         29.07.2009         
    UNVALUATED_CHARS                                   
    LANGUAGE                        EN                 
    Cheers!

  • Help required - frequent hang and slow down in my MBP

    Hi,
    My MBP get slow down frequently with the colour circle come up and need a few minute to resume and hang again. ANd this hang seem can stop the hold machine even for Force quit and Activity Monitor
    And it seem most likely that, if I quite Safari and Mail, it will be much better.
    I have used iceclean and get below information in console
    21/05/2010 6:03:36 AM ReportCrash[112] Saved crash report for ServerScanner[102] version ??? (???) to /Users/hkpchunghk/Library/Logs/DiagnosticReports/ServerScanner2010-05-21-060335localhost.crash
    and below is crash report
    Process: ServerScanner [102]
    Path: /System/Library/CoreServices/ServerScanner
    Identifier: ServerScanner
    Version: ??? (???)
    Code Type: X86-64 (Native)
    Parent Process: launchd [86]
    Date/Time: 2010-05-21 06:03:32.427 +0530
    OS Version: Mac OS X 10.6.3 (10D573)
    Report Version: 6
    Exception Type: EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000002, 0x0000000000000000
    Crashed Thread: 0
    Dyld Error Message:
    Library not loaded: /System/Library/PrivateFrameworks/PlatformHardwareManagement.framework/Versions /A/PlatformHardwareManagement
    Referenced from: /System/Library/PrivateFrameworks/ServerFoundation.framework/Versions/A/ServerF oundation
    Reason: image not found
    You help is much appreciated.
    Thanks

    If a reboot is clearing some of the problem, you ought to check the capacity and use of your hard disk. How full is this? Anything less than about 20% space may begin to slow things down.
    As for the Flash plugin, these do tend to slow Macs down with some sites. You might want to try Click to Flash to restrict the use. And as for CPU use, I saw 120% on a friend's MacBook Pro a couple of days back: too many Facebook games running at the same time.

  • Help Required on Creating and Maintaining an Apple Network Without a Server

    Hi,
    I'm an external IT technician for a new educational block at a hospital who intend on using apple mac computers alongside windows computers running off of a windows server..
    I usually deal with windows XP as an operating system so OSX is relatively new to me..
    Basically what I have is a suite of 6 iMacs which are all sharing files from the windows server via a network share drive I set up. I've just got off the phone with the project manager and she wishes to have individual logons for each member of staff and student here, this adds up to around 25 people..
    I have allready created a generic "teacher" and "student" logon which has all of the right things in the dock + settings etc that I need. Is there an easy way to duplicate those settings to create new profiles?
    I'm just trying to look for ways of making this easier for myself and for the school in the future.. I have a feeling that the ideal solution would be to have an apple server installed and manage the users from there but I don't think that it was considered at the time of purchase..
    So can anyone help me out? I'll be grateful for any tips or advice on creating and maintaining this system as I'm due to support this place for the next year.
    Thanks alot,
    Martin

    Bump.

  • Help required for sample and Hold

    Hello,
    I am working on a project Cerebral Oxygenation Monitoring. The concept is similar to pulse oximetry. I help already developed the hardware that includes the timing circuit , led driver for driving Red and IR Led, Amplifier and Filter Stage. I am getting the pulse signal but it is multiplexed signal corresponding to effect of both Red/IR Led. Now to separate it I need to use sample and hold circuit, whihc I can achieve with and IC LF398 but I want to minimise this part and directly take this multiplexed signal through DAQ Card in to LabVIEW and further create sample and hold in LabVIEW.
    The sampling needs to be in synchronus with the Timing signal given to Red and IR. How I can achieve this in LabVIEW.
    For eg: the Red Led is triggered with a pulse of 1 ms with a repeatation rate after 10 ms. So this timing pulse should trigger the sampling part.
    Please Help.

    CoastalMaineBird wrote:
    Not sure what you need the HOLD part for.
    Correct me if I'm wrong:
    You have a 1 mSec pulse, every 10 mSec.
    Each pulse triggers two LEDs:  RED and IR
    You have a single signal which contains the processed (through the body, or whatever) responses to BOTH of those signals.
    So, how does a S&H, hardware or otherwise, separate the two responses?
    Is one delayed in time, relative to the other?
    YES you are right, 1 mSec pulse, every 10 mSec. 
    Above figure shows the trigger pulses generated using standard hardware. One triggers IR and other triggers RED. In above case  I had kept repetation rate 4msec
    This is the signal which I may get
    Now how do I separate both of these signals in LabVIEW

  • Help Required For DropDownByIndex and Table

    Hi All,
       Could anybody help me to solve my problem?
       Actualy I am working with one DropDownByIndex and two
       Tables.Where within one viewset DropDown
       box and one Table(say Table1) are in one view and 
       another one table(say Table2) is in other view.
       DropDown box is  maped with one attribute suppose
       countryName and and Table1 is maped with collageName
       and locationName. So, when I will select the DropDown
       with one countryName then the table1 will show all the
       available collageName and locationName with multiple
       row.
       In other view I mean the Table2 is bind with
       availableCourse and courseDuration this two
       attributes. So whin I will click one row of Table1
       that means one collegeName is selected then the
       Table2 will show the availableCourse and
       courseDuration for that particular college. When I
       will select next row of Table1 then the value of
       Table2 will be different.
       Could anybody help me by sending the code and
       details?
       With Thanks and Regards
       Sudip

    One way is to get lead selected of drop down index , then get lead selected of table1 and pass it via a method to wdDoInit in the 3rd view so that you know what has been clicked in table1 and then accordingly get the data in table2.
    Another way you can do this is to map the tables and drop down index to value nodes and create them in the component controller and then map these value nodes to the respective views. Now when your table2 view is triggered you get the lead selected in the value node of the table1 and accordingly generate the table2.

  • Seeburger help required for 810 and Dispatch Advice (IDOC type DESADV).

    Hi All,
    1. Please let me know blogs which clearly shows settings for Seeburger components for 850 (Purchase Order) to IDOC Scenario
    --- Seeburger Workbench
    --- Seeburger Mapping Designer (BIC)
    --- Seeburger Counter and Varaibles
    --- Seeburger AS2 Spoke
    --- Any other Seeburger Component setting required
    I have understand blog for 850 -- /people/rajeshkumar.pasupula/blog/2009/08/05/wanna-implement-seeburger-for-edi-find-the-booster
    2. Anybody has blog for 810 or Dispatch Advice (IDOC type DESADV).
    3. Can anybody provide me Mapping Logic (at field level) done in XI/PI for 850, 810 , Dispatch Advice (IDOC type DESADV) .
    Regards

    Hi Rickkk,
    1. Please let me know blogs which clearly shows settings for Seeburger components for 850 (Purchase Order) to IDOC Scenario
    --- Seeburger Workbench
    --- Seeburger Mapping Designer (BIC)
    --- Seeburger Counter and Varaibles
    --- Seeburger AS2 Spoke
    --- Any other Seeburger Component setting required
    For SEEBURGER workbench please go through this blog and navigate the enbebbed links furthur to know about Seeburger workbench too.
    /people/prateek.srivastava3/blog/2009/08/01/seeburger--part-1--the-basics
    2
    2. Anybody has blog for 810 or Dispatch Advice (IDOC type DESADV).
    For 810 i think the procedure would be the same but themseeburger mapping program that validates the ANSX 810 would be different.As far as 997is concerned 997 is a functional acknowledgement.Its a genric format that is used to send acknowledgement for any EDI transaction set that has been sent.
    3. Can anybody provide me Mapping Logic (at field level) done in XI/PI for 850, 810 , Dispatch Advice (IDOC type DESADV) .
      The logic will be based on the trading partner guidelines which will contain the description of all the semantic and syntactiic description about the segments ,its feilds.we need to consider the guidelines and target side specifications too while mapping.
    Thanks,
    Ram.

  • Help required on 3508 and gigabit copper Please.

    I’m running a cisco WS-C3508G-XL-EN with software 12.0(5.4)WC(1) and 4 WS-G5482 1000Base-T GBIC’s connected to and 1 Intel Pro 1000-T (Driver version 2.84.284.0) network Card and 3 3Com 3c996-T Gigabit Copper Cards (Driver Version 1.29). All the PC’s are running Windows 2000 pro or server.
    The built in diag software that comes with the drivers reports that it’s connected at gigabit speed and there are no dropped or bad packets.
    The ports are configured for auto negotiation, full duplex and asymmetric flow control.
    But if I connect to the console port on the back of the 3508 it reports “2d23b: %LINK-3-UPDOWN: Interface GigabitEthernet0/1, Changed state to up”.
    It then changes state to down, this happens for all connected ports.
    As a result the throughput on the gigabit ports is less than on a 100 port.
    Can anyone give me any idea what I can do to keep the ports up?
    Thanks
    Jim

    Since there has been no response to your post, it appears to be either too complex or too rare an issue for other forum members to assist you. If you don't get a suitable response to your post, you may wish to review our resources at the online Technical Assistance Center (http://www.cisco.com/tac) or speak with a TAC engineer. You can open a TAC case online at http://www.cisco.com/tac/caseopen
    If anyone else in the forum has some advice, please reply to this thread.
    Thank you for posting.

Maybe you are looking for