Help required regarding Integrating Conversion Agent with SAP-XI

I want to run a simple File to File scenario which involves integrating conversion
agent. I gone through a webblog:Integrate SAP Conversion Agent by Itemfield with SAP XI
I deployed the module and I configured the channel in the same way what was specified in the webblog.
But when I run my scenario I found CM_TRANSFORMATION_ERROR as the error in communication channel monitoring.
Can u please provide me the solution for correcting the above error, this would be a great help for me..

HI,
see the below links
http://help.sap.com/saphelp_nw04/helpdata/en/43/6f1f39a08e6fcae10000000a1553f6/CMSUserGd.pdf
http://help.sap.com/saphelp_nw04/helpdata/en/ee/c9f0b4925af54cb17c454788d8e466/frameset.htm - cc
http://help.sap.com/saphelp_erp2005vp/helpdata/en/95/bb623c6369f454e10000000a114084/content.htm - fcc cOUNTER
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/da1e7c16-0c01-0010-278a-eaed5eae5a5f - conversion agent
with item fiels.
Regards
Chilla

Similar Messages

  • Requirements for integration of XYZ Service - SAP.

    Hi Team,
    Appriciate any help on understanding the below requirement and how/where to start work in XI.
    Requirements for integration of XYZ Service - SAP.
    XYZ Service has CRM middle where and SAP ECC 6.0
    XYZ Service Calls
    =============
    1. All the completed calls in XYZ Service has to go in SAP automatically for validation process.
    2. All call details (parameters) has to come in sap from XYZ Service to SAP like..
         Field Name:
         =========
         Per No.
         official no.
         mohile no.
         Cust Name.
         Address.
         etc.
    3. All the AMC generated in XYZ Service should replicate to SAP, with all the customers, AMC and product details.
    Validation in SAP:
    ==============
    4. In SAP we have to validate the calls according to below parameters.
        --> date of purchase :  abc validation
        --> Serial No. :   Should be n fixed lenght with some format
        --> Part & Qty. : Same part should not have been consumed in last 30 days in same unit.
        -->
        -->
        etc.
    Process in SAP
    ============
    5. All the calls which carry the spare parts has to approve by the store person. He can approve/disapprove the call.
    6. Call without spare part have to approve by system once validation process finish and it will considerin qlt report in sap.
    7. If the store peroson disapproves tthe call it has to go back XYZ Service and reprocess again.
    8. Prepare quality report for all the calls in SAP.
    9. Consumption report has generate for each call wise.
    10. Call wisw defective settlement( replenishment) in SAP and generate automatic loan settlement.
    11. Franchisee bill claim to SAP.
    12. ASC can change the disapproved calls and reprocess it again.
    As for my understanding and discussions from the above requiremet,
    Customer/franchisee/client....enters the request/data through the Web Application .
    process from CRM and then to SAP ECC 6.0. after all the process complete details to be shown on Web Applications.
    So here where exactly supposed ti implemet the XI system and little bit of confuse how and where to start from.
    Please guide me to start the above mentioned and give me a break to learn and do lot of things in XI/PI.
    Regards,
    Ramana.

    Thank you Gaurav.
    However, as for my understanding...as the client using a legacy system for getting the information.
    also The data is given on Web Application ( say via portal) and the data verified from CRM system and then processed via SAP ECC 6.0 giving the required information on the Wb Application to the client (Portal)
    That means needto implement XI integration to show the complete required information on the web application.
    Only this is I am not knowing how to frame this complete design and where and how exactly to stat.
    Please correct me if I am wrong and if possible with the same relavent information.
    Thank you for your valuable support.
    Regards,
    Venkat,

  • Integrating Right Fax with SAP

    Basis Gurus,
    Can some one guide me integrating "Right Fax" with "SAP".
    We are on R/3 4.7 - 640/Unix
    source documentation what exactly I need to do at SAP end and wat I need to do on Right Fax server. Is a connector require for this, I gone through some documentation which speaks at high level but not the source.
    It would be greate if you can shoot me with a document which contains step by step process of integration.
    Thanks in advance

    Hello Baslaks,
    do you mean this product ?:
    http://www.sap.com/partners/directories/SoftwareMPSolutionDetails.epx?context=21B87D61C0F646A22B2A6DB254A010CA8C9C141B7529F02972463D54EC8217D7F2BBD3F7BDD9972C5319B3E7D201697B685B24E57831EFBCD0902FCE12D0BE4AB7B196DE25A6DC6AB6391ED78965192E93FFF6EF8DB20D026B802B3381BC600540CCFE1B7DA36BAD65073DD27AB0E8D91CEF0F79AA153BA434E15331641C0867%7c5782DC22F87581DA207D9F00A7586805
    If yes, then this product has been certified by us and there should be documentation available on the vendor side which describes how to integrate this product with our SAP system. Please ask the vendor to provide you with this information as we do not have any documentation available for third party products.
    Hope this information is helpful for you,
      Juergen

  • Integrating Mobile device with SAP XI

    Hai,
           In integrating mobile device with XI.
          What are the settings i need to do in ALE settings.
          what type of adapter i need to use.
    please provide complete information related to SAP R/3 settings like
    1. logical system
    2. rfc destion nation
    3. ports
    4. parter profile
    in XI side what are the settings i need to do.
    plase provide complete information.  help me out.

    Please,
    check the following documentation
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ceb31d4f-0901-0010-60bc-8162e7c6179d
    It is an article about the integration of mobile devices with XI from this site.
    I hope it helps you.
    regards,
    Jaime

  • Integration Kit compatible with SAP 4.7 ERP?

    Is the current Int Kit for SAP compatible with SAP 4.7 ERP? How far back can you go before it breaks?

    Hi,
    Assuming we're talking XI3.x, here's the XI3.1 Integration Kit for SAP solutions - supported platforms doc:
    http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000726192&_SCENARIO=01100035870000000202&_OBJECT=011000358700000925952009E
    SAP R/3 4.6c, BASIS level 41, ABA level 41
    SAP R/3 4.7, BASIS level 41, ABA level 41
    are mentionned as min requirement.
    that's unchanged in the SP4 version of the same doc : http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000726192&_SCENARIO=01100035870000000202&_OBJECT=011000358700000735102011E
    Regards,
    H

  • Could you help me regarding UOM conversion ???

    Dear All,
    I have a requirement like this ..
    I have key-figure quantity A with various UOM, and i want to convert it into quantity B that has UOM is MT.
    To fulfill it, i create Quantity Conversion Unit using tcode: RSUOM.
    In the conversion factors tab:
    1. Choosing Dynamic Determination of Conversion Factor
        - Using Central Unit of Measure (T006) => Option 2.
    In the UOM tab:
    1. Source
      - Choosing: UOM from DataRecord
    2. Target of UOM
      - Choosing: Fixed UOM => MT
    Then i save it.
    In the query Designer.
    - I put KF Quantity A
    - I create calculated KF Quantity B.
    => But i don't see the option in Qty B property regarding conversion that i've setup in RSUOM.
    My Questions are:
    1. Is my way right for my requirement ??
    2. If i want to use this way (using RSUOM), how can i see the setting for My RSUOM Conversion in qty b.
    Really need your guidance all.
    Regards,
    Niel.

    Hi Neil
    Regarding Unit conversion, there are some FM's avaiable,
    May be these thread will help u
    Quantity Conversion Function Module
    "UNIT" in Transformation
    Thanks,
    Reward if helpd

  • Integration of OrgPublisher with SAP Portal

    Hi,
    I have an issue of integrating an organizational chart published by OrgPublisher in html-format into the SAP Portal using SAP HR Interface for Organizational Charting (HR-OCI) 6.0 (SAP ERP2005 and EP 7.0).
    I start with configuration of URL iviews for several organizational charts displaying different organizational levels. Charts are published by OrgPublisher in html-format.
    Then I would like to use HR-OCI with its Organizational Chart Launcher to launch the relevant URL iView with a relevant organizational chart depending on selected organizational unit (context-sensitive display). I tried this with SAP-provided Organizational Chart Tester iView and it works fine.
    According to the SAP HR-OCI configuration guide the Organizational Chart Launcher uses a set of URL parameters that are passed to the receiving application displaying the chart. 
    My issue is how I can pass those parameters to the relevant OrgPublisher organizational charts published as html-files in order to obtain context-sensitive chart selection.
    Best regards,
    Beata

    Hello Beata,
    We have  SAP ERP 6.0 . For some reason we don't see the new function module. Do you the reason . Pl help
    Thanks,
    Prasad

  • Help for Using Itemfeild Conversion Agent

    Hi all,
    i have read several blogs and formus on the use of Conversion Agent software for performing EDIXML To EDI format conversion. Here is the problem i have.
    we are doing an IDOC to File scenario and in the Filesender adpater we need to configure and module which does the necessary conversions(EDIXML to EDI-834). I created an Serializer using Content Master Studio and deployed the project to the Content master Engine on the XI server. When i give the transformation paramters which are mentioned in the blogs below
    /people/william.li/blog/2006/03/17/how-to-get-started-using-conversion-agent-from-itemfield
    /people/alexander.bundschuh/blog/2006/03/14/integrate-sap-conversion-agent-by-itemfield-with-sap-xi
    SAP Conversion Agent
    There are no erros shown in the SXMB_MONI or either in the Adpater Framework, but the target file is not being created. can anyone please advice me about how the module name should be set in the File Adpater(SP 17) and how can i check the erros in the conversion module in XI.

    Julie,
    Can you please pass the information if you have resolved the problem?
    Ravi

  • Integration of ProjectByNet  with SAP

    hi,
    Please any one can help me how to integrate projectbynet(product by third party) with sap .
    This product is developed in .net and i cannot use any middle layer .
    Thanks.
    sridhar

    Hello,
    the integration possibilities really depend on the functions you want to call with our SAP application.
    So you said that no middle layer is possible then the scenario of calling BAPI's oder iDOC's via librfc is not possible.
    I would recommend you to have a closer look at our Exchange Infrastructure (XI) under:
    http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
    Also have a look at our available integration scenarios to XI:
    The specified item was not found. [original link is broken]
    Have Fun,
      Juergen

  • RE: Help required regarding to upgrade from R/3 4.6c to mySAp ERP 2005

    Hi there
    I need help as we are planning to upgrade from R/3 4.6C to my SAP ERP 2005, I need the help in the context that
    . How much it will effect the prevoius functionalities, business processes user exits, reports, transactions and etc which thing one should have to keep in mind I need an general overview on this.
    2. What is the SAP best practice for Upgrade.
    3. Which things should be consider before upgrade.
    Thanks and Kind Regards
    Sohail

    Hi Sohail,
    For functional improvement between the releases you can find information in the release notes for example http://service.sap.com/releasenotes
    Also you can find http://service.sap.com/upgrade for very useful entrypoint for any information regarding upgrade.
    For more information, please check this links.
    http://www.sap.com/solutions/business-suite/erp/pdf/BWP_ERP2006_Upgrade.pdf
    http://www.sap.com/solutions/business-suite/erp/index.epx
    https://websmp103.sap-ag.de/~form/handler?_APP=00200682500000001266&_EVENT=DISPLAY
    Hope this will help.
    Regards,
    Ferry Lianto
    Please reward points if helpful.

  • Integrating 4.7 with SAP

    Hello,
    We have Adobe Flash Builder 4.7 and want to link/integrate it with SAP.  Can anyone direct me to documentation on how to do this?

    Hi Srinivas,
    Pls refer below links ,
    http://scn.sap.com/thread/1234669
    http://scn.sap.com/thread/1520885
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/303bf0c3-ad5c-3010-df84-882747341e88?overridelayout=t…
    Regards
    Nayeem

  • Documention needed regarding Integration of SIM with Authenticating server

    We need to integrate Authenticating server(4Tress) with SIM. So it will be really helpful if you could provide me with some document of how to integrate SIM with Authenticating server or which adapter I can use to get connected to an Authenticating server through SIM.

    You need to first create an external resource for ALSB configuration. You can then use the configuration to connect to ALSB and create the structure for transferring the data.
    You then have to configure a DB transport for updating the process data using ALSB.
    Hope this helps.
    Sarat

  • Help Required Regarding - SAP Job names using R3 data flows

    We are calling a set of SAP Jobs using R3 data flows in data services. When ever a job fails we first kill the active SAP jobs by logging into SAP and then restarting the Jobs.
    There are about 100 odd SAP jobs that we call using these Data services Jobs so we wanted to kill the jobs using a reusable code on the SAP side by passing the Job name just before every R3 flows just incase its still in active status.
    So wanted to know if there are any short cuts to retrive the set of associated SAP job names because it will be a tedious process to hardcode the SAP job names and pass them as parameters for all the 100 + SAP job names in the custom defined resuable code.
    Any help or advice on this please !!

    The program is not meeting the expectations
    and the problem is due to reflection.Do we know this for certain?
    ... my application gets the class name, field name
    etc. from an XML file so i don't know their method names
    beforehand .
    Now since every class instance corresponds to a row
    in the database and i have to call get and set
    methods of each class instance so the performance
    keeps on degrading as the number of columns and rows increase .
    Can somebody suggest some improvement regarding this
    and regarding creating multiple instances of the same object Class.forName() will be using a hash already, so there is probably not much room for improvement.
    Class.newInstance() probably does not take significantly more processing than a simple "new Fubar();".
    Umpteen reflective method invokations (one per column) for each row/instance - Are you saying these are the problem?
    You can test this easy enough.
    If you comment out the reflective method invocations and leave the rest of your code untouched,
    does your application processing speed up significantly?

  • Error in integrating SAP J2EE agent with SAP EP7.0

    hi
    i got the following Error in logs while attempt for hitting SAP URL it redirects to SAM after giving credential it come back to sam SAP URL says internal server Error from logs i found following:-
    SAPEngine_Application_Thread[impl:3]_37
    ERROR: AmSAPEP70LoginModule.login(): An exception occured while processing login()
    com.sap.engine.services.security.exceptions.BaseUnsupportedCallbackException: Unsupported type of callback.
         at com.sap.engine.services.security.remoteimpl.login.RemoteLoginContextHelperImpl.handle(RemoteLoginContextHelperImpl.java:126)
         at com.sun.identity.agents.sap.v70.AmSAPEP70LoginModule.login(AmSAPEP70LoginModule.java:81)
         at com.sap.engine.services.security.login.LoginModuleLoggingWrapperImpl.login(LoginModuleLoggingWrapperImpl.java:150)
         at com.sap.engine.services.security.login.ModulesProcessAction.run(ModulesProcessAction.java:69)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.services.security.login.FastLoginContext.login(FastLoginContext.java:172)
         at com.sap.engine.services.security.remoteimpl.login.RemoteLoginContextHelperImpl.login(RemoteLoginContextHelperImpl.java:72)
         at com.sap.engine.services.security.remoteimpl.login.RemoteLoginContextHelperImplp4_Skel.dispatch(RemoteLoginContextHelperImplp4_Skel.java:64)
         at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:320)
         at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:198)
         at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:129)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    06/16/2008 05:05:11:780 PM GMT+05:30: SAPEngine_Application_Thread[impl:3]_37
    AmSAPBaseLoginModule.abort(): abort result is: true

    Where do I have to create the Agent Profile? in Agents>J2EE or in Agents>Agents 2.2?
    Thanks,
    Tanguy Mezzano

  • Help required File Content Conversion.

    Hi All,
    Kindly help me in this topic i.e. File Content Conversion.
    -  What is File Content Conversion?
    -  Is knowledge of any programming language required?
    -  What is its function?
    -  How do I use it?
    Thanks in Advance.
    Regards,
    Sreedhar, Av

    Hi Sreedhar,
    Reward points if this helps
    What is File Content Conversion?
    File content conversion is used for converting flat files (fixed lenght, comma seperated) into XML messages for further processing by an integration engine. The internal XI processing (mapping, routing etc) is based on XML messages hence you need messages to be converted to XML.
    SAP By default understands xml data structure. If your file is coming in an xml format you can process it as it is.
    In case of file that is coming with a delimiter then you need to have File content conversion for SAP adpater to conver file into an XML structure which will then go to next step of Message Mapping.
    Is knowledge of any programming language required?
    No
    What is its function?
    Check these blogs for content conversion,
    /people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
    /people/venkat.donela/blog/2005/06/08/how-to-send-a-flat-file-with-various-field-lengths-and-variable-substructures-to-xi-30
    *How do I use it? *
    http://help.sap.com/saphelp_nw04/helpdata/en/2c/181077dd7d6b4ea6a8029b20bf7e55/content.htm
    Reward points if this helps
    Regards
    Pragathi.

Maybe you are looking for