Help required.....sun server rebooting very frequently

Hi all,
We have a solaris 9 server on X86 m/c...For the last 1 week, it is rebooting very frequently with kernel panic...I'm pasting the extract from "/var/log/messages" file for ur reference....Pls help me....
Regards...
cmreddy
May 1 04:42:22 ncc-w savecore: [ID 570001 auth.error] reboot after panic: BAD TRAP: type=e (Page Fault) rp=ef409d90 addr=11 occurred in module "genunix" due to a NULL pointer dereference
May 1 04:56:25 ncc-w savecore: [ID 570001 auth.error] reboot after panic: BAD TRAP: type=e (Page Fault) rp=ef401d8c addr=10 occurred in module "genunix" due to a NULL pointer dereference
May 1 05:47:53 ncc-w savecore: [ID 570001 auth.error] reboot after panic: BAD TRAP: type=e (Page Fault) rp=ef409d90 addr=11 occurred in module "genunix" due to a NULL pointer dereference
May 1 05:57:04 ncc-w savecore: [ID 570001 auth.error] reboot after panic: BAD TRAP: type=e (Page Fault) rp=ef401d90 addr=13 occurred in module "genunix" due to a NULL pointer dereference
May 1 06:02:22 ncc-w savecore: [ID 570001 auth.error] reboot after panic: BAD TRAP: type=e (Page Fault) rp=ef409d90 addr=11 occurred in module "genunix" due to a NULL pointer dereference
May 1 07:06:52 ncc-w savecore: [ID 570001 auth.error] reboot after panic: BAD TRAP: type=e (Page Fault) rp=ef401d90 addr=13 occurred in module "genunix" due to a NULL pointer dereference
May 1 07:26:54 ncc-w savecore: [ID 570001 auth.error] reboot after panic: mutex_exit: not owner, lp=fed08ef8 owner=0 thread=ef409e40
May 1 08:40:41 ncc-w savecore: [ID 570001 auth.error] reboot after panic: BAD TRAP: type=e (Page Fault) rp=ef481d90 addr=0 occurred in module "<unknown>" due to a NULL pointer dereference
May 1 11:00:46 ncc-w savecore: [ID 570001 auth.error] reboot after panic: BAD TRAP: type=e (Page Fault) rp=ef409d90 addr=11 occurred in module "genunix" due to a NULL pointer dereference
May 1 14:10:13 ncc-w savecore: [ID 570001 auth.error] reboot after panic: BAD TRAP: type=e (Page Fault) rp=ef401d90 addr=13 occurred in module "genunix" due to a NULL pointer dereference
May 1 15:57:24 ncc-w savecore: [ID 570001 auth.error] reboot after panic: BAD TRAP: type=e (Page Fault) rp=ef409d90 addr=11 occurred in module "genunix" due to a NULL pointer dereference
May 1 16:11:26 ncc-w savecore: [ID 570001 auth.error] reboot after panic: BAD TRAP: type=e (Page Fault) rp=ef409d90 addr=11 occurred in module "genunix" due to a NULL pointer dereference
May 1 16:17:09 ncc-w savecore: [ID 570001 auth.error] reboot after panic: BAD TRAP: type=e (Page Fault) rp=ef401d90 addr=13 occurred in module "genunix" due to a NULL pointer dereference
May 1 17:55:48 ncc-w savecore: [ID 570001 auth.error] reboot after panic: BAD TRAP: type=e (Page Fault) rp=ef409d90 addr=11 occurred in module "genunix" due to a NULL pointer dereference
May 1 20:41:47 ncc-w savecore: [ID 570001 auth.error] reboot after panic: BAD TRAP: type=e (Page Fault) rp=ef401d8c addr=10 occurred in module "genunix" due to a NULL pointer dereference
May 1 21:27:28 ncc-w savecore: [ID 570001 auth.error] reboot after panic: BAD TRAP: type=e (Page Fault) rp=ef401d90 addr=13 occurred in module "genunix" due to a NULL pointer dereference
May 1 23:11:02 ncc-w savecore: [ID 570001 auth.error] reboot after panic: BAD TRAP: type=8 (Double Fault) rp=fec1f3bc addr=ef489dd0
May 2 00:14:48 ncc-w savecore: [ID 570001 auth.error] reboot after panic: BAD TRAP: type=e (Page Fault) rp=ef401d8c addr=10 occurred in module "genunix" due to a NULL pointer dereference
May 2 00:41:39 ncc-w savecore: [ID 570001 auth.error] reboot after panic: mutex_exit: not owner, lp=fed08ef8 owner=0 thread=ef409e40
May 2 02:46:50 ncc-w savecore: [ID 570001 auth.error] reboot after panic: BAD TRAP: type=e (Page Fault) rp=ef409d90 addr=11 occurred in module "genunix" due to a NULL pointer dereference
May 2 07:27:42 ncc-w savecore: [ID 570001 auth.error] reboot after panic: BAD TRAP: type=e (Page Fault) rp=ef401d6c addr=8004c occurred in module "unix" due to an illegal access to a user address
May 2 09:33:52 ncc-w savecore: [ID 570001 auth.error] reboot after panic: BAD TRAP: type=e (Page Fault) rp=ef409d8c addr=10 occurred in module "genunix" due to a NULL pointer dereference
May 2 13:51:20 ncc-w savecore: [ID 570001 auth.error] reboot after panic: BAD TRAP: type=e (Page Fault) rp=ef401d90 addr=13 occurred in module "genunix" due to a NULL pointer dereference
May 2 14:04:17 ncc-w savecore: [ID 570001 auth.error] reboot after panic: BAD TRAP: type=e (Page Fault) rp=ef409d8c addr=10 occurred in module "genunix" due to a NULL pointer dereference
May 2 14:20:06 ncc-w savecore: [ID 570001 auth.error] reboot after panic: BAD TRAP: type=e (Page Fault) rp=ef409d8c addr=10 occurred in module "genunix" due to a NULL pointer dereference
May 2 15:07:38 ncc-w savecore: [ID 570001 auth.error] reboot after panic: BAD TRAP: type=e (Page Fault) rp=ef409d90 addr=11 occurred in module "genunix" due to a NULL pointer dereference
May 2 15:53:05 ncc-w savecore: [ID 570001 auth.error] reboot after panic: BAD TRAP: type=e (Page Fault) rp=ef409d90 addr=11 occurred in module "genunix" due to a NULL pointer dereference
May 2 17:01:42 ncc-w savecore: [ID 570001 auth.error] reboot after panic: BAD TRAP: type=e (Page Fault) rp=ef409d90 addr=11 occurred in module "genunix" due to a NULL pointer dereference
May 2 17:34:33 ncc-w savecore: [ID 570001 auth.error] reboot after panic: BAD TRAP: type=e (Page Fault) rp=ef6a5bd8 addr=12c occurred in module "genunix" due to a NULL pointer dereference
May 2 17:41:45 ncc-w savecore: [ID 570001 auth.error] reboot after panic: BAD TRAP: type=e (Page Fault) rp=ef401d8c addr=10 occurred in module "genunix" due to a NULL pointer dereference
May 2 18:57:52 ncc-w savecore: [ID 570001 auth.error] reboot after panic: BAD TRAP: type=e (Page Fault) rp=ef409d90 addr=11 occurred in module "genunix" due to a NULL pointer dereference
May 2 21:54:34 ncc-w savecore: [ID 570001 auth.error] reboot after panic: BAD TRAP: type=e (Page Fault) rp=ef401d90 addr=13 occurred in module "genunix" due to a NULL pointer dereference
May 2 22:41:26 ncc-w savecore: [ID 570001 auth.error] reboot after panic: BAD TRAP: type=e (Page Fault) rp=ef481d90 addr=0 occurred in module "<unknown>" due to a NULL pointer dereference
May 2 23:22:19 ncc-w savecore: [ID 570001 auth.error] reboot after panic: BAD TRAP: type=e (Page Fault) rp=ef409d90 addr=11 occurred in module "genunix" due to a NULL pointer dereference

you might get more success if you supply the symbolic stack trace so folks can see what functions/modules were involved. But even then unless someone recognises the stack trace you will need to engage your formal support options to get the dumps analysed and hence get to root cause.
are you getting vmcore.N and unix.N files created in /var/crash/'uname -n'/ if so run up mdb -k
eg mdb -k unix.2 vmcore.2
and see what you get from ::stack or ::msgbuf
tim

Similar Messages

  • After recent upgrade to IOS 7 i an seeing systems rebooting very frequently. it just goes offline and comeback online after some time. IS this hardware issue or others also facing the same

    After recent upgrade to IOS 7 i an seeing systems rebooting very frequently. it just goes offline and comeback online after some time. IS this hardware issue or others also facing the same

    Hello there, Kishoresaraogi.
    The following Knowledge Base article provides some great steps to troubleshoot your issue:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Particularly:
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 30 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • I continue to get the 'Firefox is already running' statement, which requires me to reboot - very annoying. I go to IE and then get out but it still persists. What to do?

    I tried Task manager to kill the 'already running' and it doesn't show up, so I have to reboot.

    This does not address my problem. Firefox does not 'hang,' it states that another copy is already running, and that I should first close that copy, which isn't there to start with. Usually on the task bar you'll see one or more open windows tiled or tired behind each other. In this case, there are none; hence, there doesn't seem to be 'another' copy already opened - so I reboot.
    After I wrote this thread a few days ago, I did find a work around, but this should not be necessary.
    From the desktop, right click the Firefox Icon, then left click 'open,' just as you would if you simply left clicked the icon to start with, but this allows the shadow tab that is in 'theory' open to be bypassed.

  • Problems with User Privileges - Help required Novice Server Experience

    Hi, We have an old Xserve runing Mac OS X 10.2.8.
    I have shared the 3 drives out no problem. The problem I have is with Workgroup Manager 1.2.2. I have set 4 User accounts with their own username and password to access the drives which works fine, but if one User modifies a file or puts a new file on to the Server another user has only read access to that file from the server, and if they try to copy the file/folder to their local machine a warning box comes up saying that they have Insufficent Privileges.
    It seems each User can only work on their individual files which is problem when we all need access to the same files/folders.
    What do I need to do?
    Many Thanks
    Richard

    Hi Richard.
    You need to create a Group, and add all of your Users to that Group.
    Make the owner of the sharepoint your admin account (who can be added to the Group, or not), and make the Group , well, the new Group you've created.
    Set permissions for the Group to Read & Write.
    In Workgroup Manager, Sharing, Share Points
    select AFP and then choose “Inherit permissions from parent"
    This is all in the 10.2 Server Admin, worth reading. The 10.4 docs are far better and it's a worthwhile upgrade if that's in the cards at all.

  • Help required...solaris 9 m/c rebooting frequently..

    Hi all,
    Pls help me...My solaris srever running solaris9 on x86 m/c is rebooting very frequently for the last 1 week...I'm pasting the log for ur reference..
    Regards.
    cmreddy
    May 1 04:42:22 ncc-w savecore: [ID 570001 auth.error] reboot after panic: BAD TRAP: type=e (Page Fault) rp=ef409d90 addr=11 occurred in module "genunix" due to a NULL pointer dereference
    May 1 04:56:25 ncc-w savecore: [ID 570001 auth.error] reboot after panic: BAD TRAP: type=e (Page Fault) rp=ef401d8c addr=10 occurred in module "genunix" due to a NULL pointer dereference
    May 1 05:47:53 ncc-w savecore: [ID 570001 auth.error] reboot after panic: BAD TRAP: type=e (Page Fault) rp=ef409d90 addr=11 occurred in module "genunix" due to a NULL pointer dereference
    May 1 05:57:04 ncc-w savecore: [ID 570001 auth.error] reboot after panic: BAD TRAP: type=e (Page Fault) rp=ef401d90 addr=13 occurred in module "genunix" due to a NULL pointer dereference
    May 1 06:02:22 ncc-w savecore: [ID 570001 auth.error] reboot after panic: BAD TRAP: type=e (Page Fault) rp=ef409d90 addr=11 occurred in module "genunix" due to a NULL pointer dereference
    May 1 07:06:52 ncc-w savecore: [ID 570001 auth.error] reboot after panic: BAD TRAP: type=e (Page Fault) rp=ef401d90 addr=13 occurred in module "genunix" due to a NULL pointer dereference
    May 1 07:26:54 ncc-w savecore: [ID 570001 auth.error] reboot after panic: mutex_exit: not owner, lp=fed08ef8 owner=0 thread=ef409e40
    May 1 08:40:41 ncc-w savecore: [ID 570001 auth.error] reboot after panic: BAD TRAP: type=e (Page Fault) rp=ef481d90 addr=0 occurred in module "<unknown>" due to a NULL pointer dereference
    May 1 11:00:46 ncc-w savecore: [ID 570001 auth.error] reboot after panic: BAD TRAP: type=e (Page Fault) rp=ef409d90 addr=11 occurred in module "genunix" due to a NULL pointer dereference
    May 1 14:10:13 ncc-w savecore: [ID 570001 auth.error] reboot after panic: BAD TRAP: type=e (Page Fault) rp=ef401d90 addr=13 occurred in module "genunix" due to a NULL pointer dereference
    May 1 15:57:24 ncc-w savecore: [ID 570001 auth.error] reboot after panic: BAD TRAP: type=e (Page Fault) rp=ef409d90 addr=11 occurred in module "genunix" due to a NULL pointer dereference
    May 1 16:11:26 ncc-w savecore: [ID 570001 auth.error] reboot after panic: BAD TRAP: type=e (Page Fault) rp=ef409d90 addr=11 occurred in module "genunix" due to a NULL pointer dereference
    May 1 16:17:09 ncc-w savecore: [ID 570001 auth.error] reboot after panic: BAD TRAP: type=e (Page Fault) rp=ef401d90 addr=13 occurred in module "genunix" due to a NULL pointer dereference
    May 1 17:55:48 ncc-w savecore: [ID 570001 auth.error] reboot after panic: BAD TRAP: type=e (Page Fault) rp=ef409d90 addr=11 occurred in module "genunix" due to a NULL pointer dereference
    May 1 20:41:47 ncc-w savecore: [ID 570001 auth.error] reboot after panic: BAD TRAP: type=e (Page Fault) rp=ef401d8c addr=10 occurred in module "genunix" due to a NULL pointer dereference
    May 1 21:27:28 ncc-w savecore: [ID 570001 auth.error] reboot after panic: BAD TRAP: type=e (Page Fault) rp=ef401d90 addr=13 occurred in module "genunix" due to a NULL pointer dereference
    May 1 23:11:02 ncc-w savecore: [ID 570001 auth.error] reboot after panic: BAD TRAP: type=8 (Double Fault) rp=fec1f3bc addr=ef489dd0
    May 2 00:14:48 ncc-w savecore: [ID 570001 auth.error] reboot after panic: BAD TRAP: type=e (Page Fault) rp=ef401d8c addr=10 occurred in module "genunix" due to a NULL pointer dereference
    May 2 00:41:39 ncc-w savecore: [ID 570001 auth.error] reboot after panic: mutex_exit: not owner, lp=fed08ef8 owner=0 thread=ef409e40
    May 2 02:46:50 ncc-w savecore: [ID 570001 auth.error] reboot after panic: BAD TRAP: type=e (Page Fault) rp=ef409d90 addr=11 occurred in module "genunix" due to a NULL pointer dereference
    May 2 07:27:42 ncc-w savecore: [ID 570001 auth.error] reboot after panic: BAD TRAP: type=e (Page Fault) rp=ef401d6c addr=8004c occurred in module "unix" due to an illegal access to a user address
    May 2 09:33:52 ncc-w savecore: [ID 570001 auth.error] reboot after panic: BAD TRAP: type=e (Page Fault) rp=ef409d8c addr=10 occurred in module "genunix" due to a NULL pointer dereference
    May 2 13:51:20 ncc-w savecore: [ID 570001 auth.error] reboot after panic: BAD TRAP: type=e (Page Fault) rp=ef401d90 addr=13 occurred in module "genunix" due to a NULL pointer dereference
    May 2 14:04:17 ncc-w savecore: [ID 570001 auth.error] reboot after panic: BAD TRAP: type=e (Page Fault) rp=ef409d8c addr=10 occurred in module "genunix" due to a NULL pointer dereference
    May 2 14:20:06 ncc-w savecore: [ID 570001 auth.error] reboot after panic: BAD TRAP: type=e (Page Fault) rp=ef409d8c addr=10 occurred in module "genunix" due to a NULL pointer dereference
    May 2 15:07:38 ncc-w savecore: [ID 570001 auth.error] reboot after panic: BAD TRAP: type=e (Page Fault) rp=ef409d90 addr=11 occurred in module "genunix" due to a NULL pointer dereference
    May 2 15:53:05 ncc-w savecore: [ID 570001 auth.error] reboot after panic: BAD TRAP: type=e (Page Fault) rp=ef409d90 addr=11 occurred in module "genunix" due to a NULL pointer dereference
    May 2 17:01:42 ncc-w savecore: [ID 570001 auth.error] reboot after panic: BAD TRAP: type=e (Page Fault) rp=ef409d90 addr=11 occurred in module "genunix" due to a NULL pointer dereference
    May 2 17:34:33 ncc-w savecore: [ID 570001 auth.error] reboot after panic: BAD TRAP: type=e (Page Fault) rp=ef6a5bd8 addr=12c occurred in module "genunix" due to a NULL pointer dereference
    May 2 17:41:45 ncc-w savecore: [ID 570001 auth.error] reboot after panic: BAD TRAP: type=e (Page Fault) rp=ef401d8c addr=10 occurred in module "genunix" due to a NULL pointer dereference
    May 2 18:57:52 ncc-w savecore: [ID 570001 auth.error] reboot after panic: BAD TRAP: type=e (Page Fault) rp=ef409d90 addr=11 occurred in module "genunix" due to a NULL pointer dereference
    May 2 21:54:34 ncc-w savecore: [ID 570001 auth.error] reboot after panic: BAD TRAP: type=e (Page Fault) rp=ef401d90 addr=13 occurred in module "genunix" due to a NULL pointer dereference
    May 2 22:41:26 ncc-w savecore: [ID 570001 auth.error] reboot after panic: BAD TRAP: type=e (Page Fault) rp=ef481d90 addr=0 occurred in module "<unknown>" due to a NULL pointer dereference
    May 2 23:22:19 ncc-w savecore: [ID 570001 auth.error] reboot after panic: BAD TRAP: type=e (Page Fault) rp=ef409d90 addr=11 occurred in module "genunix" due to a NULL pointer dereference

    You could try and add the latest recommended patch cluster from sunsolve.sun.com, this looks very much like a software error, and a recent patch cluster might cure it.
    The information you pasted doesn't really give any clues. Could you paste a trace as well?
    To get a trace, go to the /var/crash/<hostname>/ directory, which directory contains a number of files named vmcore.<a number> and unix.<a number>.
    To get the trace from these crash files, run mdb <one of the numbers>
    once mdb started, type "$c", this will display the trace.
    For example, if your /var/crash/<hostname> directory contains the files:
    unix.2 unix.3 vmcore.2 vmcore.3
    you would run
    # mdb 2
    or
    # mdb 3
    .. exit mdb by typing ctrl+d when you are done.
    7/M.

  • Help required network configuration - Gateway route settings get erased on reboot.

    Oracle Linux 7
    Linux myhostname 3.8.13-35.3.1.el7uek.x86_64 #2 SMP Wed Jun 25 15:27:43 PDT 2014 x86_64 x86_64 x86_64 GNU/Linux
    #cat /etc/sysconfig/network-scripts/ifcfg-eno16780032
    TYPE="Ethernet"
    BOOTPROTO="none"
    DEFROUTE="yes"
    IPV4_FAILURE_FATAL="no"
    IPV6INIT="yes"
    IPV6_AUTOCONF="yes"
    IPV6_DEFROUTE="yes"
    IPV6_FAILURE_FATAL="no"
    NAME="eno16780032"
    UUID="2d1107e3-8bd9-49b1-b726-701c56dc368b"
    ONBOOT="yes"
    IPADDR0="34.36.140.86"
    PREFIX0="22"
    GATEWAY0="34.36.143.254"
    DNS1="34.36.132.1"
    DNS2="34.34.132.1"
    DOMAIN="corp.halliburton.com"
    HWADDR="00:50:56:AC:3F:F9"
    IPV6_PEERDNS="yes"
    IPV6_PEERROUTES="yes"
    NM_CONTROLLED="no"
    #route -n
    Kernel IP routing table
    Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
    0.0.0.0         34.36.143.254   0.0.0.0         UG    0      0        0 eno16780032
    34.36.140.0     0.0.0.0         255.255.252.0   U     0      0        0 eno16780032
    169.254.0.0     0.0.0.0         255.255.0.0     U     1002   0        0 eno16780032
    When I reboot the machine, the first line in route table gets erased, I then run:
    #route add default gw 34.36.143.254
    After which network works fine.
    Help required. I don't want to use NetworkManager.

    The following might be useful:
    https://access.redhat.com/solutions/783533
    "When transitioning from NetworkManager to using the network initscript, the default gateway parameter in the interface's ifcfg file will be depicted as 'GATEWAY0'. In order for the ifcfg file to be compatible with the network initscript, this parameter must be renamed to 'GATEWAY'. This limitation will be addressed in an upcoming release of RHEL7."
    NetworkManager is now the default mechanism for RHEL 7. Personally I don't quite understand this, because as far as I can gather it is a program for systems to automatically detect and connect to known networks. I think such functionality can be useful when switching between wireless and wired networks, but for a server platform, I wonder.

  • Java Mail,SMTP server not starting,help required urgently

    Hi i have been working on java mail .Yesterday it was working ok but today suddenely i am getting this thing.its not starting the smtp server i guess,just exiting and get the command prompt ..dont know what to do.help required how to go about this error
    am pasting the debug information.please check and let me know
    the compilation ,smtp server and others are all valid
    thanks
    Microsoft Windows XP [Version 5.1.2600]
    (C) Copyright 1985-2001 Microsoft Corp.
    C:\Documents and Settings\Pavan>cd C:\Program Files\Java\jdk1.5.0_07\bin
    C:\Program Files\Java\jdk1.5.0_07\bin>javac jdbcExample3.java
    C:\Program Files\Java\jdk1.5.0_07\bin>java jdbcExample3 smtpserver address
    DEBUG: JavaMail version 1.4ea
    DEBUG: java.io.FileNotFoundException: C:\Program Files\Java\jdk1.5.0_07\jre\lib\
    javamail.providers (The system cannot find the file specified)
    DEBUG: !anyLoaded
    DEBUG: not loading resource: /META-INF/javamail.providers
    DEBUG: successfully loaded resource: /META-INF/javamail.default.providers
    DEBUG: Tables of loaded providers
    DEBUG: Providers Listed By Class Name: {com.sun.mail.smtp.SMTPSSLTransport=javax
    .mail.Provider[TRANSPORT,smtps,com.sun.mail.smtp.SMTPSSLTransport,Sun Microsyste
    ms, Inc], com.sun.mail.smtp.SMTPTransport=javax.mail.Provider[TRANSPORT,smtp,com
    .sun.mail.smtp.SMTPTransport,Sun Microsystems, Inc], com.sun.mail.imap.IMAPSSLSt
    ore=javax.mail.Provider[STORE,imaps,com.sun.mail.imap.IMAPSSLStore,Sun Microsyst
    ems, Inc], com.sun.mail.pop3.POP3SSLStore=javax.mail.Provider[STORE,pop3s,com.su
    n.mail.pop3.POP3SSLStore,Sun Microsystems, Inc], com.sun.mail.imap.IMAPStore=jav
    ax.mail.Provider[STORE,imap,com.sun.mail.imap.IMAPStore,Sun Microsystems, Inc],
    com.sun.mail.pop3.POP3Store=javax.mail.Provider[STORE,pop3,com.sun.mail.pop3.POP
    3Store,Sun Microsystems, Inc]}
    DEBUG: Providers Listed By Protocol: {imaps=javax.mail.Provider[STORE,imaps,com.
    sun.mail.imap.IMAPSSLStore,Sun Microsystems, Inc], imap=javax.mail.Provider[STOR
    E,imap,com.sun.mail.imap.IMAPStore,Sun Microsystems, Inc], smtps=javax.mail.Prov
    ider[TRANSPORT,smtps,com.sun.mail.smtp.SMTPSSLTransport,Sun Microsystems, Inc],
    pop3=javax.mail.Provider[STORE,pop3,com.sun.mail.pop3.POP3Store,Sun Microsystems
    , Inc], pop3s=javax.mail.Provider[STORE,pop3s,com.sun.mail.pop3.POP3SSLStore,Sun
    Microsystems, Inc], smtp=javax.mail.Provider[TRANSPORT,smtp,com.sun.mail.smtp.S
    MTPTransport,Sun Microsystems, Inc]}
    DEBUG: successfully loaded resource: /META-INF/javamail.default.address.map
    DEBUG: !anyLoaded
    DEBUG: not loading resource: /META-INF/javamail.address.map
    DEBUG: java.io.FileNotFoundException: C:\Program Files\Java\jdk1.5.0_07\jre\lib\
    javamail.address.map (The system cannot find the file specified)
    C:\Program Files\Java\jdk1.5.0_07\bin>

    The debug output doesn't show an obvious problem. You're
    going to have to actually debug your program. A debugger
    might be helpful.

  • Linux server rebooting frequently.

    HI Linux Gurus,
    Need some help.
    I have RED HAT LINUX AS2.1 .[This is a OS cluster ].
    I frequently faced the problem that the server reboots itself suddenly.We have observed this multiple times .
    And surprisingly no abnormal activity is happening on the server.
    Can anybody explain how to investigate and troubleshoot this ?
    We normally look at var/log/messages but nothing significant we are not progressing further.
    Any help will be highly appreciated.
    Santosh.

    I would agree check the hardware especially the RAM

  • Outlook 2010 doesn't automatically re-connect after Exchange Server reboot - help

    We have recently upgraded from Exch 2003 to Exch 2010.  We also upgraded our users Outlook client from 2003 to 2010.  Now when an Exch 2010 server is rebooted Outlook does not re-connect automatically.  You have to close Outlook and re-open
    it and it starts working again.  Others have reported the same issue.  Outlooks shows the status in the status bar area as password is required.  I have read an article in the forums about it being an authentication problem.  What
    changes can I make in Outlook or to Exchange 2010 to make Outlook automatically reconnect after an Exchange server reboot.  thanks

    They connect internally in the LAN with their domain credentials.
    I haven't noticed any errors in the Exchange server related to this issue but I have not really looked in the logs right after this happens.
    I guess I just don't understand how when we were running Exch2003 with Outlook2003 we did not have this problem.  Now that we have spent all this money and upgraded to bigger, better, smarter software we are having a problem like this.  It seems like
    if Outlook senses the lost connection and transfers to Offline that it would keep periodically to see if the email server is back up and reconnect. 
    Sorry for the delay response.
    I would suggestyou create a new Windows profile and test it again. Some times the windows profile curropted and woithout being able to provide credentials.
    Hope it is helpful.
    Fiona Liao
    TechNet Community Support

  • I have a 27" iMac connected to several others pc and to Server via router. Very frequently Lan or internet drops in my iMac

    I have a 27" iMac connected to several others pc and to Server via router. Very frequently Lan or internet drops in my iMac. I Have OS 10.6.7 with all updates.

    Issues like this are going to be related to the network. Intermittant problems are typically due to network interference, have you checked istumbler.net to get a report of your network?

  • Databases are not coming up after server reboot(sun solaris).

    Hi
    OS - Sun OS 5.10 local zone. RDBMS version - 11.2.0.3
    Databases are not coming up after server reboot.
    We have verified the below points.
    Cat/etc/init.d/oracle
    $ORACLE_HOME/bin/oradism file permissions are 4550.
    lock_sga is parameter set to false.
    cat /var/opt/oracle/oratab entries are set to Y
    Still Databases are not coming up after server reboot.
    Please advise.

    Hi,
    Can you post further information from alert log. Doesn't coming up, means you needs to share the information some thing about your environmente settings about kernel parameter and init$ORACLE_SID parameters details.
    That would be easy for others to look into it further to analyze things.
    - Pavan Kumar N

  • Help required...very urgent !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

    Help required with an error message.
    "Table Z0CL_BATCLA for object class CHARGE does not exist"

    Hi
    It means your Z0CL_BATCLA is not assigned to object CHARGE, you have to create the linke between object and table in the table TCDOB.
    You can do it by trx SCDO, but in this case you have to change in standard object.
    Max

  • About (not) getting help for Design Premium CS4 [very long post]

    If what i've heard on numerous occasions is true, and I really hope it is, Adobe spends a lot time, energy, emotion and effort on their Customer support system. In an effort to provide a bit of insight "from the trenches" I've spent the last hour sifting through Adobe's website trying to find an email where I could send a bit of critique regarding the quality of Adobe's Tech Support and I've come to the conclusion that these forums are a paying customer's only outlet. As part of my job training, I take a lot of notes whenever anything gets done over the phone. This then is a full transcript of the arduous process I had to go through in order to try and fix the infamous "licence has expired" issue. I'm not necessarily looking for feedback, I just want somebody at Adobe to see this and realise how much money is being wasted on a very dysfunctional "Support Service".
    Adobe tech support notes:
    How can the ball be dropped to this extent?
    Friday, April 2nd
    10:00   Installed the suite on the office's new design computer after using the trial editions until they expired. None of the programs in the suite will run because the licence is "expired".
    11:30   Not knowing if it might somehow be related to there being leftover files from the trial editions (which I didn't uninstall) I uninstall everything and install again.
    13:10   I receive the same error message. Tech support principally led to a waste of a day due to the way that Adobe's databases seem to catalogue customers. According to Jay Lopez, our suite wasn't registered to my boss (Doc) it was registered to Ken Schoepp, who hasn't worked here in about 8 years, since he was one of the earlier names connected to this address. It took about 2 hours and 2 transfers to figure this out.
    15:30   I finally get transferred to tech support.
    15:51   TS answers.
                It takes 2 hours to assess what the problem is and suggest that I should do a full uninstall and reinstall of the suite, regardless of the fact that I did that before calling TS. 2nd installation fails to solve the problem whereby the suite won't load up (as expected).  I'm given some instructions as to what files to remove that may contain registration information and could possibly prevent the program from running. Tech support hangs up as their shift is soon over but they assure me that this thrid installation of the day should fix the problem. To speed up the installation I copy the files onto the HDD.
    17:15   For some unknown reason, Setup.exe crashes crashes at about 65% of initialisation. That's right, the installer can't even run!
    Tuesday, April 6th
    8:37     Calling TS
    8:45     Don answers
    8:51     Get informed that I was somehow routed to CS instead of TS. The case id I provided requires solutions that he can't provide,           Don will transfer the call to TS.
    8:53     Jitesh gives me a new case id before putting me on hold as he reads the case file.
    9:05     Informs me that since my call deals with an installation issue I need to be transferred to another department. In response to           my comment that I've already been misrouted twice today Jitesh says he will contact the department personally in order to           transfer me more quickly as I'm already in their service.
    9:13     Just before hanging up Jitesh mentions that there are only 12 calls ahead of me in the queue.
    9:19     Rohan Subba answers.  After reading the file he asks if I would accept sharing my desktop in order for him to look at the root             of the issue using Acrobat Pro Meeting.
    9:26     With files installed, logging in to "adobesupport.na5.acrobat.com" as guest.
                As things are not working as expected, Rohan places me on hold as he goes to look up solutions.
    9:31     Back from checking resources, try them out, still don't have access to some files due to lack of permissions.
    9:36     Comes back with instructions on how to setup the Windows7 super admin account which should give me full access to the             locked out files.
    9:42     Logged in as admin. More hair pulling as we try to configure the permissions properly.
    10:02   File sharing finally works and he downloads the installation log files. As we attempt to change permissions to access other            files I ask why it is has taken 13 hours of TS and 4 techs before someone suggests using Adobe Connect Pro Meeting since it            seems like a great way to gain access to files. Rohan's answer: Due to the solution chain, TS had to try other options           before going for the ACPM.
    Over the next hour we try various things to get rid of the files that are blocking the re-installation of Premium Suite. I'm instructed to download the "Windows Installer Cleanup Utility" and "adobeCS3cleanscript" even though I'm running CS4. The trial versions I was using were also CS4. I'm assured that the CS3script works just fine for CS4 removal. It gets run with option 1, once, and twice with option 2, rebooting between each pass.
    11:01      Realisation sets in.  "I'm sorry, I cannot resolve this issue and I will escalate your call to Tier 2 TS". Initially he asks           if Thursday is good for the follow-up call but I inform that I will not be there on that day and that I am the only one at the office           who can handle these types of technical calls.
    11:05     Comes back on the line and informs me that T2 TS will contact me on Friday.
    Spent the remainder of the day reading online, chasing possible solutions.  Found out about a hidden option 3 for Cleanscript, run it twice, still no improvement. Having been shown the location of the installation log I sift through it and research 1) where each of the offending registry key is, 2)  how to change permissions to the offending keys so I can delete them. Thanks to google and other people who've had the same issues I'm having and followed by blogging about it.
    In total, 22 registry keys blocked the installation. Because each key would cause the installer to lock up and quit It took 6 hours to run the installer 22 times until it crashed in order to find and eliminate each one. When they were all taken care of, only 4 Premium suite modules wouldn't install: Flash, Flash Player, Acrobat and Air.
    Progress at last.
    Thursday, April 8th
    Mesum, a resolution specialist, calls work asking to speak to Doc about our case. According to him there is no mention of a contact person (me) or a date for a call back. When asked probing questions about these discrepencies Mesum says that seeing as how Adobe TS are trained to exacting standards and that note taking is a very important part of the job there is no way that this break down happened on their end. If the information my boss is referring to is "not in the file" then it MUST be false. The obvious answer, according to Mesum, is that whoever made the appointment with Adobe didn't take down good notes. As a T2 specialist he "...makes it a point to always return the call at the arranged time".  I don't have the notes regarding everything that was said that day but from talking to Doc on the following day I gather that Mesum made other comments to bring into doubt the quality of Aararat's (the company I work for) training, their note taking skills and the quality of their employees. Not once did he take any hint of responsibility for the communication screw-up. Mesum will be calling me back on the Friday (as was originally written down in our file) and provides a new case id before hanging up.
    Friday, April 9th
    12:01     Mesum call and wastes no time in trying to resolve the issue. I inform of the progress I made yesterday (independently).
    12:08     Error :2 shows up again.  Instructs me to clear the temp folder, the cache and to verify that the print spooler           service is enabled. It is.
    12:21      While the system is rebooting, Mesum mentions that the "very detailed conversation" he had the previous day and asks if           I have been briefed about it. I explain that I have been briefed (neglecting to mention that I am the one who made the              appointment and took copious notes about all my TS conversations, including this one) and that I hoping to get this issue           resolved once and for all.  Mesum makes a grandstanding comment about how "he makes it a point to always return the call at           the arranged time as these calls are very important and it is crucial that they get resolved". He then goes on about the           lenghts Adobe has gone to in order to create a support chain to make sure that if an issue is unresolved on either end of the           chain, that this lack of resolution can be tracked down.
    Error:2 indicates that we are still having registry blockage issues. In response to my question whether there might be a full list of the registry keys that Adobe Premium suite injects during an installation Mesum responds that techs have been given very strict and specific instructions about tampering with the   windows registry (which is odd considering 3 days prior a tech dove right into     registry editing) he proposes that I instead uninstall Flash, Flash player and Adobe Air.
    13:07   Since the uninstaller won't run for just the 3 modules, Mesum asks that I   uninstall everything once again. I am then to only           start by installing Acrobat first, and only Acrobat, before installing the rest of the suite. Because this process will take a long           time and Mesum has other calls to make he leaves me to this numberless installation being fairly certain that this will solve the           issue. He adds that such problems are very frequent with Acrobat. Should his proposed course of action not solve the issue I           can type up a follow-up response by going to www.adobe.com/go/supportportal. I am to expect a follow-up call on Monday.
    13:22   Because I was really not looking forward to going through another round of uninstalling and reinstalling, I attempt to run flash             one last time prior to starting the cycle. Run into error:5
                reboot
    13:29   Error:5 again.  Time to uninstall once more.
    13:35   Error while uninstalling. Nothing to do but click continue and see how it goes.
    13:53   Uninstall finished with problems, running it again. Adobe Sing is still showing as   an installed component.
    13:55   Uninstall with errors. Flash Plug-in will not uninstall. Running Uninstaller again.
    13:59   Uninstaller fails again.  Decide to go and manually delete files and folders inspecting each one by one.
    Spent the rest of the afternoon going through the install logs like I did on April 6th, unlocking ownership and deleting corrupted keys one at a time.
    18:08   The whole Suite finally installs except for Flash and Indesign.
    18:47   After hunting down more keys, the installer completes with errors but at least all the programs are installed.  Acrobat, Air, Flash plug-in are still not installed properly.
    Monday, April 12th
    8:20     Call tech support
    While on hold I try to find my ticket on the support portal using the case id's I've been given. None of them show up on the system. Basically, I'm stuck to using phone support.
    9:23     TS answers. Sanjay
    9:28     After Sanjay has verified the case id, I provide him with an update to the file regarding what I've done since I hung up on Friday, describing the new issues.
    9:34     Placed on hold
    9:42     Comes back and explains that this issue will require more consultation with his seniors. To make sure that he looks up the            right issue I repeat the exact problem I would like him to research. Three times he repeats the information back to me just a           little differently. Finally on the 4th repetition of the problem I'd like addressed he "gets it" and thanks me for "providing that           pertinent information". 
    What I don't understand is that I repeated the same information that he repeated back to me 4 times before he seemed to understand what his notes told him he should be researching. From the heaviness of his accent I suspect that their was a bit of language barrier here.
    9:48     Places me on hold
    9:59     Comes back with a possible solution.
    10:08   As his solution requires me to delete files I don't have access to due to lack of permissions, his solution can't be applied. He places me on hold.
    10:11   Comes back, with another possible solution.
    10:17   Still not working. I ask how I can change administrator settings for specific files    and he needs to go check articles again.           Shouldn't this type of knowledge just come off the top of his head if he's in TS? Sanjay just walks away at this point,           not asking to put me on hold nor placing the call on hold. I can hear conversations in the background the whole time.
    10:24   Comes back, thanking for staying on hold (even though I wasn't). This time he asks me to look for specific adobe folders. I           can't delete them because I'm supposedly not an administrator, even though I'm logged in using the enabled super-admin           account. He tells me I need to type a very specific command at the command prompt to reset the admin account. I thought           that's what he was going to research the last time he left so I ask what I have to type at the command line to do this. Sanjay           doesn't and asks if he can put me on hold again. I politely and calmly answer that no, I don't want to be put on hold. Every time           I've asked him a question he's had to go in order to talk to his seniors (as he calls them). If possible, why not escalate my call           and put me in touch with one of these seniors or a manager in order to minimise the amount of time I will be placed on hold. He           puts me on hold.
    10:34   Ashima comes on the line. Unlike Sanjay, she sounds confident and authorative.
    10:44   After discussing what I'm trying to do she informs that not being able to delete files and folders is a Windows issue, not an           Adobe issue. Even after I mention that a previous tech had helped me solve a similar problem in the previous week and try to           reason that since it's Adobe uninstaller that caused this issue she sticks to her claim that it's a Windows issue and that she           cannot help me resolve the issue. I am to contact Microsoft tech support in order to get help with this issue.
    12:17   Call Microsoft technical support
    12:23   Jacqueline answers. I describe the problem I'm having with managing permissions in Windows 7 and that I've been told that I           resetting the admin account should solve this problem. She seems to agree and asks for my Windows serial number before we           can start working on the issue. Upon finding out that I have an OEM version of Windows, Jacqueline informs me that I have 2           options: look online or pay 59$ per call on credit card for support as free support is not provided to OEM licences since they are           typically only installed by resellers and   assumed to be serviced by them. Sadly, this is not my case.
    12:31   Having repeated my options back to Jacqueline to make sure I understood her correctly I inform her that I will terminate the           call since I will not be paying for paying and therefore will go online for help. She sounds surprised at how quickly I made           my decision, wishes me good luck and the call is ended.
    13:30     Started researching a solution. I find what I need to know and apply it, managing to reclaim ownership of the files and           folders. Run the installer again and everything installs now except for the Acrobat, Air and Flash plug-in.
    Tuesday, April 13
    15:30   Since I haven't received a call back from Mesum I try to find our case information on the Adobe Support Portal. I figure that           Mesum probably needed me to contact him prior to today in order to confirm whether the solution worked or not. Logging in           with the email address we used to register our software and log our support calls is unsuccessful. Either the password is wrong           or the email is not active. Seeing as we have 2 other office emails with which Adobe products have been registered over the           years I log on with them to see if we have pending cases on either of them. negative. Just to test something out I attempt           logging in to the original email from another computer.  While I can't log in I no longer get the message that the email isn't           related to an active customer account, just that the password is wrong. Resetting password. Still can't login.
    16:06   Starting LiveChat with Adobe to see if they can help. On hold.
    16:12   Connected. explain the situation.
    16:19   Says the password is reset from their side. Try it and doesn't work.
    16:22   I tell Live Chat the reset didn't work, and wait for response.
    16:29   He assures me it's been reset and that I should try again.
    16:30   Try it to connect via two other computers. Fail. Inform him again. Wait.
    16:36   Informs me I will need to call Phone Support. I ask if he can connect me.
    16:38   No, he cannot connect me. There is no Live Chat Tech Support. Due to the amount of lag between responses I ask if how many           chat sessions he works on at the same time.
    16:41   Answer: three at a time.
    16:45   Finish typing comment and suggestion about possibly reducing that number because the amount of lag time for simple           requests is just too much.
    16:46   Final response and goodbye.
    16:47   Call Phone Support
    16:50   Jerry in the Philippines.  I explain the issues I've been having with our account and the failure to reset the password. Jerry puts a note in the file and that he'll look into it.
    16:58   Puts me on hold as he goes to explore.
    17:01   Comes back, can't see any issues. Asks me for permission to logon to the client account by using our email and password. I           accept. He logs on and sees that there are in fact no pending cases that show up in our client account, even though we have           multiple concurrent case id's showing on his side. He says he'll look into it.
    17:07   Client login issue is unresolved but at least I'm getting transferred to TS.
    17:23   Panpaj answers. I explain the situation and provide case id.
    17:38   He provides a new case id. I have to describe the whole case history.
    17:46   On hold.
    17:52   Turns out I was transferred to the Acrobat specific TS. Seeing as how my installation problems aren't dealing specifically           with Acrobat he can't help me. He will   transfer me to general TS.
    18:16   Animesh answers. explain the situation and provide case id.
    18:20   Puts me on hold as he reads the file.
    18:22   Repeats the problem as described according to the file.
    18:30   Puts me on hold as he goes to find articles.
    18:36   Asks me to share the desktop. Connecting to connectteam.acrobat.com
    18:44   Upload of log file complete, reading over it.
    18:48   Sharing screen caps of installation error messages.  I've been thoroughly documenting each and every single one. Instructs me           to download and AdobeCS4cleanscript. When I explain that I've already used the CS3 version I'm informed that the CS3 version           should never be used to try and clean up a CS4 installation since it won't work.
    18:56   I'm informed that TS closes at 19:00 and that he won't be able to finish this call.   However, if I read article kb 401401 I should           find some steps that will solve the issues that I'm experiencing.
    19:01   While looking for the article I inform him that I can't access my TS updates on the           Support Portal and that in a previous call Phone Support was not able to explain          why. Might he have any idea why? He says he'll check it out.
    19:05   "That's odd.  I'll add this complaint to the file."
                Animesh adds that If this knowledge base article does not resolve the issue, I should make sure to call back. He's added a note in the file to automatically escalate my call to Tier3 TS.
                "What? There's a T3?" I ask. "Why has it taken 2 weeks to get this call escalated to tier 3?"
                He apologizes if this taken so long to be escalated but there are definite checks and procedures that need to be followed before a call can be escalated to Tier 3.
    April 15th
    11:10   Starting new uninstall of CS4
    11:20   Uninstaller error with InDesign.
    11:31   Running CS4cleanscript, all options.
    11:49   Completed running CS4cleanscript followed by a manual clean-up of remaining   folders.  Starting a new install.
    12:04   Install error with Flash 10 ActiveX.
    12:06   Install error with Flash 10 plug-in.
    12:37   Installer finished, with errors.
    12:53   Test launched every application in the Suite and they seem to be working in spite of the errors. So be it, I'm never calling Adobe TS again.
    Questions and suggestions to Adobe
    In spite of not having my issue corrected I must say that the politeness of every representative was exemplary.
    While I realise software piracy is a big issue, why is it that pirates don't struggle with your DRM system yet legal users do? Either scrap your current DRM and replace it with something that will not cripple a system if an installation goes wrong or change your installers.
    Software suites are convenient yes but there are now so many modules that come bundled with the suite that seem utterly pointless because the documentation for them is sorely lacking an "at a glance" explanation of features, benefits and purpose. Adobe Air, Sing, Version Cue and Bridge come to mind. Don't you think cutting down on module bloat would make interoperability an easier thing to manage and maintain?
    As a user who has multiple hard drives in his system (one each for the OS, applications and project data) I don't like installers that place files all over my system without my consent. If an installer asks for a destination folder, ALL programs should go into that folder. Files and programs that are shared across the suite for added functionality or registration purposes should ask for a user-specified shared folder (in case there is one) rather than just go into the (assumed) default.
    Why is the Support DB's search function so useless? I've tried (and tried, and tried, and tried...) to find useful solution articles but something is just plain wrong with your search algorithms. I've tested this. Pick an article at random, then do a search for it's title. Too often the search engine won't even find it. The only time searches work is if one has the precise number of the article, such as KB 401401.
    The amount of checks and procedures required for service escalation needs to be streamlined in order to speed up the process. It took too long to get to the right Tier. By the time I was finally escalated to Tier 3 your support services had eroded all of their credibility.
    Practices and procedures (P&P) need to be more uniform. I have one tech telling me to use one version of clean script and claiming it's fine whereas another claims that only the CS4 script would work to resolve my issue. Why is this? What does this reveal about levels of training? There is also large gaps in the knowledge of individual representatives. As should be expected, some representatives knew exactly what to do and how to do it without having to resort to articles every 3 minutes.  Others, such as Sanjay, either need to be retrained or let go. His lack of knowledge was thoroughly exasperating.
    The case id system needs to be reworded. Over these 2 weeks I was given 4 case id's, none of which ended up showing up in the support portal for follow-up.  Furthermore, note taking seems to be a problem because there was a lot of information that just never seemed to make it "in the file".
    Why do calls get transferred to the wrong department so often?
    In Closing
    Due to having more pressing matters to attend to at work and seeing as how I could not afford to spend any more time fixing the harm that was brought on by carrying out the suggested "solutions" I have not called back since April 15th. The suite runs "with quirks" and will stay that way until I rebuild the system because it seems that the only solution that remains regarding the installation woes is to wipe the drive and start from scratch.
    Thank you for reading this whole transcript. I hope it helps you improve your customer service experience.
    Marc-Andre Renaud

    Thank you for the sympathy and the information about the Adobe.com forum Michael.
    I posted here because, to be honest, for a company that's acknowledged their installers and updaters and support needs some work, they seem very determined to obfuscate the means by which users can provide direct feedback to the company. Much like you, I've also noticed a trend in CS5 installations that mirrors the issues that were present in CS4. it's a sad state of affairs.
    As for my installation, you are also quite right to say that a clean install would have been a lot faster than what I went through with TS and it was actually my first idea. Before calling TS I'd actually read through the forums and noticed that a large number of users who were faced with my situation had no other choice but to reformat. I was just giving Adobe the benefit of the doubt and wasted 2 and a half weeks through that course of action...
    What makes this situation even more frustrating is that the installer failed on a fresh system. It was a custom-built design machine, assembled and configured by myself. The only software that had been installed on it prior to Design Premium was Firefox, an FTP client and the start of my problems, trial versions of various CS4 programs. I used trials just long enough to retire the previous design computer so that I wouldn't contravene the EULA's stipulation of not running more than one instance of software at the same time on different machines.  Turns out being honest once again penalised a legal customer.
    If there is just thing users should learn from my far from unique tale of failed tech support it's that if you ever run into a problem with the installation, don't bother calling TS, just reformat and start from scratch.  It might seem like it'll take longer to get going again, but in actuality, it's the opposite. Reformatting means you'll be up and running in about 1 or 2 days rather than 2 weeks.
    Marc

  • Oracle 10G Db Starts-up After Server Reboot, BUT Goes DOWN After Some Time

    Hi All,
    I am really puzzled over this one. I have couple of servers running DB on them and I have used scripts to auto-enable them when server(s) reboot.
    But there is one server where I see this funny behavior.
    The DB comes-up after server reboot.
    I can verify that in the startup logs and some more logs that I created.
    I can see that LISTENER is able to communicate also.
    But after a while, the DB shuts-down....!!
    I have checked all the places I could. I have also tried to see the difference between this server and others (I did not install this one), but can not see any difference.
    Is there anyway to find out (log) what is shutting down the DB??
    Any help will be much appreciated as I am at my wits end.
    Following is snap-shot from my logs:
    Fri Mar 16 20:42:29 EDT 2007
    Running dbstart.
    Done with starting all, let's check status...
    Fri Mar 16 20:42:42 EDT 2007
    LSNRCTL for Solaris: Version 10.2.0.1.0 - Production on 16-MAR-2007 20:42:42
    Copyright (c) 1991, 2005, Oracle. All rights reserved.
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for Solaris: Version 10.2.0.1.0 - Production
    Start Date 16-MAR-2007 00:46:56
    Uptime 0 days 19 hr. 55 min. 46 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Listener Parameter File /oracle/product/10.2.0/Db_1/network/admin/listener.ora
    Listener Log File /oracle/product/10.2.0/Db_1/network/log/listener.log
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=10.103.253.50)(PORT=1521)))
    Services Summary...
    Service "orcl" has 2 instance(s).
    Instance "orcl", status UNKNOWN, has 1 handler(s) for this service...
    Instance "orcl", status READY, has 1 handler(s) for this service...
    Service "orclXDB" has 1 instance(s).
    Instance "orcl", status READY, has 1 handler(s) for this service...
    Service "orcl_XPT" has 1 instance(s).
    Instance "orcl", status READY, has 1 handler(s) for this service...
    The command completed successfully
    Current Status:
    # date
    Fri Mar 16 21:30:40 EDT 2007
    # su - oracle -c "lsnrctl status"
    Sun Microsystems Inc. SunOS 5.10 Generic January 2005
    LSNRCTL for Solaris: Version 10.2.0.1.0 - Production on 16-MAR-2007 21:30:53
    Copyright (c) 1991, 2005, Oracle. All rights reserved.
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
    TNS-12541: TNS:no listener
    TNS-12560: TNS:protocol adapter error
    TNS-00511: No listener
    Solaris Error: 146: Connection refused
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=10.103.253.50)(PORT=1521)))
    TNS-12541: TNS:no listener
    TNS-12560: TNS:protocol adapter error
    TNS-00511: No listener
    Solaris Error: 146: Connection refused

    I was just looking at that.. Thanks for the tip.
    Following is what I see. But not sure what does it tell me?? Please help......
    From alert_orcl.log:
    <snip>
    db_recovery_file_dest_size of 2048 MB is 0.00% used. This is a
    user-specified limit on the amount of space that will be used by this
    database for recovery-related files, and does not reflect the amount of
    space available in the underlying filesystem or ASM diskgroup.
    Fri Mar 16 20:42:41 2007
    Errors in file /oracle/product/10.2.0/Db_1/admin/orcl/udump/orcl_ora_7700.trc:
    ORA-00604: error occurred at recursive SQL level 1
    ORA-12663: Services required by client not available on the server
    ORA-36961: Oracle OLAP is not available.
    ORA-06512: at "SYS.OLAPIHISTORYRETENTION", line 1
    ORA-06512: at line 15
    Fri Mar 16 20:42:42 2007
    Completed: ALTER DATABASE OPEN
    From /oracle/product/10.2.0/Db_1/admin/orcl/udump/orcl_ora_7700.trc
    # cat /oracle/product/10.2.0/Db_1/admin/orcl/udump/orcl_ora_7700.trc
    /oracle/product/10.2.0/Db_1/admin/orcl/udump/orcl_ora_7700.trc
    Oracle Database 10g Release 10.2.0.1.0 - 64bit Production
    ORACLE_HOME = /oracle/product/10.2.0/Db_1
    System name: SunOS
    Node name: gcars0j6
    Release: 5.10
    Version: Generic_118833-24
    Machine: sun4u
    Instance name: orcl
    Redo thread mounted by this instance: 1
    Oracle process number: 15
    Unix process pid: 7700, image: oracle@gcars0j6 (TNS V1-V3)
    *** SERVICE NAME:() 2007-03-16 20:42:37.548
    *** SESSION ID:(159.3) 2007-03-16 20:42:37.548
    Thread 1 checkpoint: logseq 255, block 2, scn 8602014
    cache-low rba: logseq 255, block 3
    on-disk rba: logseq 255, block 767, scn 8602399
    start recovery at logseq 255, block 3, scn 0
    ----- Redo read statistics for thread 1 -----
    Read rate (ASYNC): 382Kb in 0.16s => 2.33 Mb/sec
    Total physical reads: 4096Kb
    Longest record: 3Kb, moves: 0/1066 (0%)
    Change moves: 1/8 (12%), moved: 0Mb
    Longest LWN: 308Kb, moves: 0/29 (0%), moved: 0Mb
    Last redo scn: 0x0000.0083431e (8602398)
    ----- Recovery Hash Table Statistics ---------
    Hash table buckets = 32768
    Longest hash chain = 1
    Average hash chain = 149/149 = 1.0
    Max compares per lookup = 1
    Avg compares per lookup = 1925/2083 = 0.9
    *** 2007-03-16 20:42:37.702
    KCRA: start recovery claims for 149 data blocks
    *** 2007-03-16 20:42:37.705
    KCRA: blocks processed = 149/149, claimed = 149, eliminated = 0
    *** 2007-03-16 20:42:37.706
    Recovery of Online Redo Log: Thread 1 Group 2 Seq 255 Reading mem 0
    ----- Recovery Hash Table Statistics ---------
    Hash table buckets = 32768
    Longest hash chain = 1
    Average hash chain = 149/149 = 1.0
    Max compares per lookup = 1
    Avg compares per lookup = 2054/2074 = 1.0
    Error in executing triggers on database startup
    *** 2007-03-16 20:42:41.963
    ksedmp: internal or fatal error
    ORA-00604: error occurred at recursive SQL level 1
    ORA-12663: Services required by client not available on the server
    ORA-36961: Oracle OLAP is not available.
    ORA-06512: at "SYS.OLAPIHISTORYRETENTION", line 1
    ORA-06512: at line 15

  • OOB White Screen Of Death: Silverlight Installation required after each reboot.

    Hi,
    we are getting White Screen Of Death on few user's machine for last few months and a number of users is getting added from last month for the same issue. Earlier we were using the CleanSilverlight from the following site 
    http://support.microsoft.com/kb/2608523.
    Now we have the following issue that requires immediate fix:
    Whenever we apply CleanSilverlight then my OOB starts working fine but it start displaying same white screen after few days without any action (Installation/Uninstallation)
    Whenever the system reboots then we need to apply CleanSilverlight and install the Silverlight once again on user's machine to work with OOB. It seems rebooting interferes with OOB application.
    Both of these issues are very frequent from last one month. I don't know if any update to windows/browser is the root cause for the issue.
    One the system is having the following configuration to run OOB:
    OS name and version: Windows 7 32-bit
    Browser name & version: IE 8 & Google Chrome 38.0.2125.111 m
    Silverlight version: 5.1.30514.0
    Any help would be greatly appreciated.Regards, Maddy

    Hi,
    Clean the corrupted Silverlight installation and reinstall the Silverlight should fix the issue:
    As mentioned above it does fix the issue but sometimes its not permanent solution, It just pop up once again.
    I don't understand why should we downgrade the version of the Silverlight. Its working fine after applying CleanSilverlight
    and reinstalling Silverlight. 
    There must be something that's corrupting it. vize Antivirus, any new update etc.
    Also I would like to know why the Silverlight is getting corrupted at all. Why do we need to apply CleanSilverlight?
    Still looking for a proper solution.
    Regards,
    Maddy

Maybe you are looking for

  • Can anyone help me with a problem with Safai when I try to go to certain web sites?

    When I try to go to some various web sites. a window appears saying "Safari is no longer is responding because of a script on the web page".  It will ask me if I want to stop or continue and if I select "Continue", pretty soon it allows me to enter s

  • Adobe Reader 9.4.x crashes ...

    Download http://www.dat.de/e10liste/e10vertraeglichkeit.pdf and open. It will crash on Windows 2000 with Adobe Reader 9.4.0 or Adobe Reader 9.4.2 Please fix it.

  • Not Required Main Work Centre on Order Header Maintenance Order

    Hi Experts, I want to know about main work center on order header maintenance order. Standart SAP is main work center required, and i want to set main work center on order header is not required. How Can i set Main Work center on order header is not

  • Audiobooks in iTunes is playing at high speed

    I recently downloaded some audiobooks onto iTunes but when I play them back they're are high speed. Any ideas why and how I can stop it! It's very annoying!

  • Start up issues

    After the last update for Leopard, I noticed that every time I start my computer my hard drive folder opens automatically. I always close every window before I shut down my computer. Any ideas on how to stop the hard drive from opening automatically?