Help Required to configure GRC Work Inbox Type Not Found Error

All .. I am new to the hands on part on GRC 10. Am trying to configure RM Work INbox. When I go through NWBC to Risk Asessments and try to create a Risk am getting the below error: Type _Not-Found Error for the transaction GRRM_POWL_RNP and GRRM _POWL_RESPONE. Have tried some of the suggestions on earlier threads e.g SICF etc. Appreciate your help to resolve

Fernando . Thanks for the response. I am getting this error when I am trying to create a risk. Attached is the snapshot of the error. I have tried stuff like deleting the cache, checked SICF to see if Web Dyn Pro is active etc

Similar Messages

MSS: Approve working time Program "       " not found error

Hi,
I am able to enter working time and release in ESS. CAT2, CAT4 and CAT6 are also working fine. Im using the Approve Time sheet data iView in MSS to approve working time. Im not sure if I did all the required configuration in IMG Approve working time.But when I click the iView I get a Java exception as shown below. Pl find the ST22 dump also. Can you please let me know
1. What could be the problem.
2.What are minimum configuration to be done in IMG Approve working time.
com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCExecuteException: Program                                          not found., error key: RFC_ERROR_SYSTEM_FAILURE
     at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:101)
     at com.sap.xss.hr.cat.approve.blc.FcCatApprove.rfcExecute(FcCatApprove.java:307)
     at com.sap.xss.hr.cat.approve.blc.FcCatApprove.init(FcCatApprove.java:276)
     at com.sap.xss.hr.cat.approve.blc.wdp.InternalFcCatApprove.init(InternalFcCatApprove.java:200)
     at com.sap.xss.hr.cat.approve.blc.FcCatApproveInterface.onInit(FcCatApproveInterface.java:136)
     at com.sap.xss.hr.cat.approve.blc.wdp.InternalFcCatApproveInterface.onInit(InternalFcCatApproveInterface.java:133)
     at com.sap.xss.hr.cat.approve.blc.wdp.InternalFcCatApproveInterface$External.onInit(InternalFcCatApproveInterface.java:313)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:920)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:889)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPMProxy.attachComponentToUsage(FPMComponent.java:1082)
     at com.sap.xss.hr.cat.approve.vac.dd.VcCatApproveDrillDownList.onInit(VcCatApproveDrillDownList.java:
ST22 dump
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_PROGRAM_NOT_FOUND', was not
     caught in
    procedure "BUILD_TABLE_STRUCTURE" "(METHOD)", nor was it propagated by a
     RAISING clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    On account of a branch in the program
    (CALL FUNCTION/DIALOG, external PERFORM, SUBMIT)
    or a transaction call, another ABAP/4 program
    is to be loaded, namely " ".
However, program " " does not exist in the library.
Possible reasons:
    a) Wrong program name specified in an external PERFORM or
       SUBMIT or, when defining a new transaction, a new
       dialog module or a new function module.
    b) Transport error
Regards
Srini

Starting a new thread

Type not found error

Hi, my problem is "OCI-22303: type not found".
I have a package in a database, say, MY_PCKDG.aa_number
Then I'm trying
std::vector<int> var;
var.push_back(12);
setVector(stmt, index, var, "MY_PCKDG.AA_NUMBER"); //here it fails saying the type was not found
How to find the type? I have tried the type name alone, both uppercase and non-uppercase, and <package name>.<type name>, both all uppercase and non-uppercase.. Any suggestions?
--Andrew

Fernando . Thanks for the response. I am getting this error when I am trying to create a risk. Attached is the snapshot of the error. I have tried stuff like deleting the cache, checked SICF to see if Web Dyn Pro is active etc

Alert configuration or Alert Inbox-----404 Not Found

Hi,
In RWB, When I click Alert configuration or Alert Inbox
the following message is displayed
404 Not Found
SAP J2EE Engine/6.40
The requested resource does not exist.
Details: Go to main page of this application!
Is this due to installation problem ?
How to fix this ?
Thanks,
ss

Hi,
check the following entries in your Exchange Profile:
com.sap.aii.rwb.server.centralmonitoring.r3.ashost --- Must be full qualified
com.sap.aii.rwb.server.centralmonitoring.httpport --- 80<SysNo> or see SMICM -> Goto -> Services: http-Port
Normaly you only need to refresh you RWB with the following link:
http://<System>:<Port>/rwb/rtc?op=init
if this doesn't work try to restart the complete ABAP Stack.
Good luck!
Chris

EPMA not working: Requested service not found error , version 11.1.2.2

Hi All,
I am facing problem as my EPMA (version 11.1.2.2) connection is not working and it is showing the following error after giving the user credentials
Code: com.hyperion.awb.web.common.DimensionServiceException
Description: An error occurred processing the result from the server.
The connection was working fine till last Friday and I had to restart all the services followed by a network slowness. After that I could not make EPMA working. I have tried the following steps so far (as recommended on similar issues)
1. Increased the DimensionServer startup time to 1800 in BPMA_Server_Config.xml
2. Restarted EPMA server and services.
Please note that I have the environment where EPMA is on Windows server and Essbase is in Linux server. Hyperion planning and Essbase connection is working fine. I am using Oracle 11g for EPMA relational database.
Would appreciate your help to resolve the issue.

Hi John,
Thanks so much for your response.
I checked the event viewer and found some Oracle connection error.
[EPMA Server Startup] FATAL An error occurred during initialization of the Dimension Server Engine: ORA-03114: not connected to ORACLE.Oracle.DataAccess.Client.OracleException ORA-03114: not connected to ORACLE at Oracle.DataAccess.Client.OracleException.HandleErrorHelper(Int32 errCode, OracleConnection conn, IntPtr opsErrCtx, OpoSqlValCtx* pOpoSqlValCtx, Object src, String procedure, Boolean bCheck) at Oracle.DataAccess.Client.OracleTransaction.Commit() at Hyperion.DataAccessLayerCore.DatabaseContext.Commit() at Hyperion.DataAccessLayerCore.DALDatasetCommand.Dispose(Boolean disposing) at Hyperion.DataAccessLayerCore.DALRowset`1.Dispose(Boolean Disposing) at Hyperion.DataAccessLayerCore.CommandWrapper.Dispose() at Hyperion.DataAccessLayerCore.SchemaCommand`1.Dispose(Boolean disposing) at Hyperion.DataAccessLayerCore.SchemaCommand`1.Dispose() at Hyperion.DataAccessLayerCore.GenericDAO.Select[T](Action`1 callback, SetParamsEvent`1 onSetParams) at Hyperion.DimensionServer.DAO.DimensionPropertyManagerDAO.LoadDimensionMemberMemoProperties(Int32 libraryID, Int32 dimensionID, Action`1 action) at Hyperion.DimensionServer.PropertyManager.LoadDimension(Dimension dimension) at Hyperion.DimensionServer.PropertyManager.LoadProperties() at Hyperion.DimensionServer.Library.Load() at Hyperion.DimensionServer.Global.Initialize(ISessionManager sessionMgr, Guid systemSessionID, String sqlConnectionString)
[EPMA Server Startup] ERROR SVR_ERR_PROCESSMGR_CANT_INIT_SESSIONMGR:Cannot initialize the Session Manager.Hyperion.DimensionServer.Interface.Exceptions.EPMAServiceException: Cannot initialize the Session Manager. ---> Oracle.DataAccess.Client.OracleException Connection request timed out at Oracle.DataAccess.Client.OracleException.HandleErrorHelper(Int32 errCode, OracleConnection conn, IntPtr opsErrCtx, OpoSqlValCtx* pOpoSqlValCtx, Object src, String procedure, Boolean bCheck) at Oracle.DataAccess.Client.OracleException.HandleError(Int32 errCode, OracleConnection conn, IntPtr opsErrCtx, Object src) at Oracle.DataAccess.Client.OracleConnection.Open() at Hyperion.DataAccessLayerCore.DatabaseContext..ctor(DataAccessLayer dataAccessLayer) at Hyperion.DataAccessLayerCore.DataAccessLayer..ctor(NameValueCollection settings, String tablePrefix, String baseNamespace, String schemaVersion, Boolean onlyLoadKnownTables) at Hyperion.DataAccessLayerCore.DataAccessLayer..ctor(NameValueCollection settings, String tablePrefix, String baseNamespace, String schemaVersion) at Hyperion.SessionManager.DAO.SessionManagerDataAccessLayer..ctor(NameValueCollection settings) at Hyperion.DimensionServer.SessionManager.SessionStoreRdbms.Initialize(String rdbmsVendor, String rdbmsConnParams, Int32 rdbmsCommandTimeout, Boolean logAllSQL) at Hyperion.DimensionServer.SessionManager.SessionManager.Initialize(String configFileName, Boolean restorePastInstanceSessions, Boolean enableCaching) --- End of inner exception stack trace --- at Hyperion.DimensionServer.Service.Main.InitializeSessionManager() at Hyperion.DimensionServer.Service.Main.Start()
I am working on different recommendations for this type of error and update if I find any solution. Any help in this regard will speed up the process.
Thanks again for the guidance.

My photoshop cc doesn't work. "_crtCreateSymbolicLinkW not found in DLL "C.\Windows\SYSTEM32\MSVCP110.dll"". Please help

my photoshop cc doesn't work. "_crtCreateSymbolicLinkW not found in DLL "C.\Windows\SYSTEM32\MSVCP110.dll"". Please help

I checked my windows 7 pro machine for the module I see many copies if the DLL with different dates two different sizes all are version 11.0.51106.1 so I guess there are 32bit and 64bit versions. Some are in Adobe folders some in Wacom folders ad in two windows folders including system32. I do not know if there is and entry point "_crtCreateSymbolicLinkW" in it.

After connection lost SetVector fails with OCI-22303: type not found

Hi there,
I use statelessConnectionPool and after application is loosing connection to oracle for short time, all folowing setVector calls will fail with
SetVector fails with OCI-22303: type "DEMO"."PROPERTIES" not found
however its there and was working fine before connection was lost,
As far as i read about the getConection for statelessConnectionPool will reestablish connection if required to return valid connection handle, but somehow the setVector does not work.
Any idea?
Thanks in advance
Andrew

Hi,
I want to reconnect to same instance, I think i missed tnsnames part, did not knew its required, so i should add to client tnsnames or server the FAILOVER_MODE part?
like this example:
PAYROLL =
(DESCRIPTION =
(ADDRESS =
(COMMUNITY = TCP.world)
(PROTOCOL = TCP)
(HOST = VSERVER)
(PORT = 1521)
(CONNECT_DATA =
(SID = HR)
(FAILOVER_MODE =
(TYPE = SELECT)
(METHOD = BASIC)
(RETRIES = 20)
(DELAY = 15)
strange thing that connection seams to be valid only in complains about type not found, or maybe connections are not valid only i cant see it, does the not valid connections in the pool are reconnected or make new when i call GetConnection? or i should terminate connections on "end of comm channel error" so when db is reachable again it will reestablish new connections?
Andrew

TS1544 "keychain not found" error messages pop up all the time, please help!

Hi, Ive been constantly getting "keychain not found" error messages ever since i updated to OS X and cant sync messages, facetime, calendars etc. i've tried keychain first aid and get this message:
Verification started
Checking keychain configuration for Lee (user ID=501)
Home directory is /Users/Lee
Checked login keychain
Error: login keychain not found
Unable to get info for ~/Library/Keychains/login.keychain, reason: The operation couldn’t be completed. No such file or directory
Checked default keychain
Checked keychain search list
Problems were found; you should choose the Repair option to fix them
Verification failed
Can anyone help?
Thanks

Is there a login.keychain in /Users/username/Library/Keychains/? The message says not. If not, create a new one or restore the one residing in your bootable backup/clone or Time Machine backup.

With 3.6.12, Help menu item "For Internet Explorer Users" results in a "Page Not Found" error. Is this a known bug? Is it being addressed?

Clicking the 3.6.12 Help menu item "For Internet Explorers" item results in a "Page Not Found" error.
The URL of the resultant page is https://support.mozilla.com/en-US/kb/Windows%20start%20page?as=u
Is this a known bug, if so, is it being addressed? If so, someone needs to work faster.
If it is not a known bug, someone needs to get right on it - you want people to switch to Firefox and then there is this bug -- not a good way to impress Internet Explorer users.

Hi Claudio Roca,
I have encountered the same problem. Do you found the solution for this issue? I will much appreciated if you willing to share your solution and email to [email protected] Thank you so much.
Regards,
Hau Chee

"DSN not found error" plz help me.

am doing my project in jsp. using tomcat.
am connecting the database using access.
it cause the error like " DSN not found error"
am verified so many times the data source name as well as data base connection.
but not to be clear the error.
am also tried it in weblogic, it worked perfectly.
then am reinstall the tomcat and used other platform but not worth.
plzzzzzzzzzz some one help me to clear the error.
thanx in advance.
with regards,
senthil

I think you can see again file faces-config.xml.
You check the tag <faces-config>, it must be
<faces-config xmlns="http://java.sun.com/xml/ns/javaee"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-facesconfig_1_2.xsd"
version="1.2">
//body tag
</faces-config>

DSN not found error and no default driver specified....plz help me

am doing my project in jsp. using tomcat.
am connecting the database using access.
it cause the error like " DSN not found error"
am verified so many times the data source name as well as data base connection.
but not to be clear the error.
am also tried it in weblogic, it worked perfectly.
then am reinstall the tomcat and used other platform but not worth.
plzzzzzzzzzz some one help me to clear the error.
thanx in advance.
with regards,
senthil

Yes, it has a DSN. It is:
DSN Test Homer
User Name ******
Server homer.cs.odu.edu
The connection string is:
Provider=MSDASQL.1;Password=*******;Persist Security Info=True;User ID=******;Extended Properties="DSN=Test Homer;UID=******;PWD=******;SERVER=homer.cs.odu.edu;"
with the appropriate user name and password filled in.

Dotfuscator CE error: External type not found System.Windows.Input.ICommand,PresentationCore

Preemptive will not support CE so I am trying here...
I have an application targeting the .NET Framework 4.0. It builds and runs fine but I cannot get it to compile in Dotfuscator CE. I am stuck.
Dotfuscator CE (v5.0.2500.0) with Visual Studio 2010 SP1. Here is the Error:
Resolving method references...
External type not found System.Windows.Input.ICommand,PresentationCore, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35.
Build Error.
The problem seems to originate from ICommand being moved from PresentationCore.dll (in NET 4.0) to System.dll (in NET 4.5). Studio handles this and compiles fine as I am targeting NET 4.0 and the references all point to
C:\Program Files (x86)\Reference Assemblies\Microsoft\Framework\.NETFramework\v4.0\
Dotfuscator CE however does not seem to handle it correctly and I am not sure how to correct the issue. Any help would be greatly appreciated!!

Hi Perter,
Thanks for your response.
External type not found System.Windows.Input.ICommand,PresentationCore, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35.
Maybe it is related to the references in your project.
Reference:
The type 'System.Windows.Input.ICommand' exists in both 'PresentationCore.dll' and 'System.dll'
Since it is not the VS General issue, I am moving your question to the moderator forum ("Where is the forum for..?").
The owner of the forum will direct you to a right forum. Thanks for your understanding.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Help! 'Page not found error' when use the word 'account' on my web page!

I have encountered the weirdest problem when making some changes to my website.
When adding text within the <p></p> tags everything is fine until I type the word 'account' or 'accounts' then I get a 'page not found' error.
Any other text can go between those tags, only the word 'account' causes the problem.
Any ideas?
(I am using Dreamweaver MX 2004 and its a PHP page)
I am so confused on this one, so any help would be much appreciated!
Thanks.

http://www.reformationassociates.com/ - This is the website, the weirdest part is, it is only happening on pages after they have been opened through Dreamweaver, so it's only once I access them that the problem occurs, I dont have to make any changes, just open them and they suddenly show up as 'page not found'.
http://www.reformationassociates.com/archive/Pinnacle.php is one of the pages that was accessed yesterday via Dreamweaver and we have had to change the word to 'acct' to stop the 'page not found' error.
Afriad I dont know what SSI files are? sorry....
Thanks.

Configuration file jdbcpds.conf is not found.

Hi,
My problem is: Configuration file jdbcpds.conf is not found
When: I've this problem when I try to run a report with rwrun. The file is in the reports/conf folder. We try execute this reports at the client side.
I think that reports doesn't find the conf files because folder's name have changed. In wich configuration files/registry/env. path i can put the access to the reports/conf folder?
Under 10g
Thx very much

I've found my problem
in ORACLE_HOME\cauprefs.ora I've to add this line
Reports.PluggableDataSourceFactories = "oracle.reports.plugin.datasource.jdbcpds.JDBCDataSourceFactory"
in ORACLE_HOME\reports\conf\rwbuilder.conf I've to add this line
<pluginParam name="jdbcpds" type="file">jdbcpds.conf</pluginParam>
that it!

Instructions for "Actionlist Not Found" error didn't work

i received the actionlist not found error and despite following the corrective instructions three times, i'm still unable to install adobe flshplayer for internet explorer...any help?
...i also perfomed a clean uninstall of flashplayer the second time but didn't work

I don't know what "corrective instructions" you are referring to, but if you use the offline installer, you shouldn't get that message any more.

Help Required to configure GRC Work Inbox Type Not Found Error

Similar Messages

Maybe you are looking for