Help required to restore my old 1st generation iPhone!

I got this old US purchased 1st generation iPhone 8GB which I simply  failed to get it restore through using iTunes. I have followed what is  advise on Youtube whereby you can virtually get anything but not mine to  works. It keeps locking out the phone & allows only the emergency  calls. I wonder does it relate to it's original location whereby the  telco provider sim lock or etc and I would have to need to use a US SIM  card inserted in order to get it rectify? Any ideas? I can still use it  as a simple call and answer hand-set but cannot goes into its IOS if I  insert any working SIM card. Thanks

Try a manual install, as outlined in the link below. Then search YouTube for activating.
Basic troubleshooting steps  
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
 In Memory of Steve Jobs 

Similar Messages

  • What is the best way to connect my old 1st generation iPhone to my stereo receiver so I can listen to pandora?

    What is the best way to connect my first generation iPhone to my stereo receiver so that I can listen to Pandora through the stereo?

    I am hoping someone will answer this question you have asked. I just purchased the iSimple Gateway system and even though it says on the box that it works with the iphone3G when I plug it in to the 30pin connector it says that it does not support. It does work when I plug an iPhone4G . I have to use the headphone jack only with my 3G to listen to Pandora untill I figure out the problem .

  • I found my brother's old 1st generation iPod. An unknown error 1442 keeps appearing every time I try to restore the iPod.

    I found my brother's old 1st generation iPod. An unknown error 1442 keeps appearing every time I try to restore the iPod.

    Error 23, 28, 29: These errors may indicate a hardware issue with your device. Follow the steps in this article. Also attempt to restore while connected with the white USB Dock Connector cable that shipped with your device, on a known good computer and network to isolate this issue to the device. The MAC address being missing or the IMEI being the default value, (00 499901 064000 0), can also confirm a hardware issue. Out-of-date or incorrectly configured security software can also cause these errors.
    http://support.apple.com/kb/TS3694#error28

  • Old 1st generation a1088

    hi wonder if anyone can help
    i have a old 1st generation a1088 base station which was recently  disconected now iv plugged it back in im unabe to get it re connected,  iv reset the base station and i running 5.5.3 software on the windows 8 when i open the software the base station is located i then go throught the setup to connect to my own router at the very end i have a message come up saying airport utility was unable to find your airport wireless device after restarting.  The settings for this airport wireless device has been successfully updated, but there was a problem re-joining the wireless network or finding the airport wireless device. you may need to select your network in manage network connections andtry again
    iv tried looking at my network connection and the apple base station has dispareared the only time im able to get it to so show up again is if i reset the base sation to start agin
    i have a lead running from the base sation to my computer and its still says the same thing, hope this makes sense and someones able to help
    many thanks

    Three things must match up exactly in order for the AirPort Express to join a wireless network
    1) The Express must use the exact same wireless network name
    2) The Express must use the exact same wireless network password
    3) The Express must use the exact same wireless security settings
    Most users get 1) and 2) correct, but do not know or fail to provide the Express with the correct wireless security settings to join the network. The result is the same error message that you are receiving now.
    Basically, this error is saying that the Express stored the settings that you provided for it correctly, but those settings were not the correct settings to join the network.
    Do you know the exact type of wireless security that your wireless router is using?

  • Using 1st generation iPhone as iTouch

    My father gave me his 1st generation iPhone to use as an iTouch for my daughter.  It still had the deactivated SIM card in it.  I plugged it in to my iTunes and it immediately wanted to update the software.  I believe it updated to 3.1.2.  But something must have happened during that processed because now it won't get past the emergency call screen.  When I plug it into iTunes it says it needs to be restored.  So I do the restore.  Then when it's done it goes to sync and can't complete that. One of the errors I get is that it can't recognize the apps on the phone.  I am forever stuck at the emergency call screen.  Is this phone too old to use?  Any help would be appreciated.

    Taking the SIM out makes no difference.  I get to the screen where everthing looks normal.  When it hit the Sync button it looks like it will sink and then stops and I get this message:  "iTunes cannot sync to iPhone because the apps installed on the iPhone could not be determined".  Then I get kicked out.
    I have already click on that link.  I have Googled and researched and tried everything!

  • How to use old 1st gen iPhone as iPod after deactivated?

    I just got a new iPhone 4S and gave my first generation iPhone to my kid to use as an iPod. I transferred the phone number so now the new iPhone works as my phone and the old iphone did not connect to AT&T but did work as an iPod (or through wireless). Rather than just sync'ing to his computer, he erased the iPhone somehow while it was not connected to a computer. This apparently erased everything including activation. Now when he hooks up to iTunes on a Mac or PC, he automatically goes to iTunes Store and gets a page asking for him to activate. The iphone has multiple languages on the screen and window for making emergency call so it looks like he wiped the old iphone "clean". From reading discussions, my impression is that iPhone needs to be activated before you can use even as an iPod.  So my question is how can I get this old iPhone to work as an iPod?
    I do have Time Machine backups of my Mac from when the old iphone was activated and connected to AT&T.   Is there some way to use this to restore iphone to the way it was before the above?
    I suppose the other option would be to do some kind of jail-break fix?
    thanks

    More inof:
    I saw an old post that said: "Does original iPhone work without phone service -- Yes, but you won't be able to install future firmware updates or restore the iPhone with iTunes if wanted or needed.. Both require the iPhone being activated." 
    Not knowing this limitation, we did a full restore/reset on an old 1st gen iphone, so is there anyway to get it working like an ipod.  Per above, I get a screen asking me to activate.
    AT&T even obliged me by allowing this phone to be reactivated (for a few days) and gave me a new sim card to put in the phone, but it wouldn't reactivate probably since it's so old:  AT&T didn't know what to do and Apple wouldn't deal with a product out of warranty.
    So now phone is not activated and am basically locked out from using as ipod.

  • Transferring from 1st generation iphone to iphone 3gs

    Im selling my 1st generation iphone and buying a 3gS, possibly all in the same day. But i just want to know how long it will take to get my phone number transferred to the new 3gs and how soon i will be receiving calls on there?? Is there a waiting period? I dont want to sell it and not be able to get my calls on my new phone....
    Thanks for the help in advanced.

    Yeah I don't see it being a problem with a store associate assisting you on how to reset the phone. And just to be safe, when you sell your old phone, simply remove the SIM card from the top. Ask at the store if you're not sure about how to do this. With that card out, any calls to your number will never find that phone.
    Good luck,
    Brian

  • 1st generation iPhone and Early Termination Fee

    Hello all, here's a question, since it was announced that AT&T will no longer share revenue with Apple does this now mean that owners of the unsubsidized 1st generation iphone will be able to get out of their 2 year contracts early without a Early Termination Fee?

    More than likely, yes.
    The first generation iPhone was not subsidized in the traditional way, as the iPhone 3G will be subsidized.
    at&t did not provide a subsidy or a discount to you on the sales price of the first generation iPhone.
    I became an at&t subscriber 3-4 months prior to the iPhone being available. I selected a phone that was subsidized by at&t agreeing to a new two year contract. I activated my iPhone as an existing subscriber agreeing to a new two year contract on my iPhone's activation date. I was not charged an early contract termination fee or any penalty when doing so, and I still have my original phone that was subsidized by at&t which I've used with my iPhone's SIM card on occasion.
    The same should apply when purchasing the iPhone 3G, which will require agreeing to a new two year contract beginning on the activation date for the 3G iPhone with no early contract termination fee penalty for the existing iPhone - which was not subsidized in the traditional way as the iPhone 3G will be subsidized.

  • I have a 1st generation iphone(jail broken) ios 3.1.3.the appstore disappeared. how can i retrieve it .

    i have a 1st generation iphone(jail broken) ios 3.1.3.the appstore disappeared. how can i retrieve it . 

    Restore your phone as a new device in iTunes, this "should" remove the jailbreak & restore all default apps to your phone.

  • Question about selling 1st generation iPhone

    I am looking to sell my 1st generation iphone, would it be wise to pull out my sim card so I could use for the 3g or would I get a new one when I purchase the 3g

    You will get a new GSM SIM card when you purchase the 3G. Your account will be transferred to the new SIM when you activate it. Your old SIM is useless at that point, and can be discarded. The person buying the old iPhone will need to put in their own SIM.

  • Can I use Bluetooth headphones with a 1st generation iPhone?

    Can I use Bluetooth headphones with a 1st generation iPhone? The headphones pair but the sound comes out of the phone and not the headphones. The phone has iOS 3.1 which is the last software the phone will support. Thanks.

    This will help you:
    Original iPhone
    The original iPhone features Bluetooth capabilities only for making calls. Connecting to a PC or streaming audio other than phones calls through Bluetooth is not supported.
    IPhone 3G
    With the iPhone 3G operating system, its Bluetooth capabilities are expanded to support wireless stereo headsets, file sharing with other Bluetooth devices, and use of the iPhone as a 3G modem. Also supported are new capabilities for combining the iPhone with Bluetooth accessories.
    IPhone 4.0
    The 4.0 version of the iPhone's operating systems keeps the expanded Bluetooth functions introduced in version 3 and adds one new benefit: Bluetooth keyboard support, so iPhone owners can use wireless keyboards wherever they go.
    Sponsored Links
    Read more : http://www.ehow.com/facts_6926213_iphone-bluetooth-capability_.html

  • Finally Got iPhone 3GS - can I use my old (1st gen) iPhone as iPod Touch?

    Got my new 3GS this morning - now looking to see if I can get any use from the old 1st gen iPhone it replaces.
    Is it possible to run a 1st generation iPhone without a SIM, so that it functions like an iPod Touch? The only functions I need on the old one are iPod related - play music, video - I don't mind losing apps, internet etc.
    Any ideas?

    See this article: Using an original iPhone without a wireless service plan http://support.apple.com/kb/HT3406

  • My 1st generation iPhone cannot connect to iTunes store

    I have a 1st generation iPhone with iOS 2.  When I open the App Store app I get a pop up message that says "cannot connect to iTunes Store". The iPhone is connected to wifi and loads pages perfectly.  Please help!

    I had a go at that.. and it comes up saying i dont even have any updates to download.. but i do on my iPhone. It's annoying. Even if i do download the apps on my computer and sync, how are my sisters supposed to update my app on their ipods/iphones?

  • 1st Generation iPhone-Microsoft Exchange Server

    Hi-
    I have a first generation iPhone and want to use the Microsoft Exchange Server to download my work email and calendar. I have tried several times going through the process of entering email address, log in, password, domain, and sever. Each time I get an error message that says 'exchange account verification failed'. I have walked through this with 2 other people on their 3G iPhones and it works perfectly. Am I having trouble with this because I'm using the 1st Generation iPhone? Any assistance or troubleshooting with this would be awesome!
    Thanks!

    What version of the iPhone OS are you running? Check Settings > General > About. MS Exchange support is not available on pre-v2.0 versions. Original iPhones running v2.x are able to connect to MS Exchange servers (assuming the server is set to allow that access, which in your case since other iPhones are accessing it, it seems to be).

  • I currently have the 1st generation iphone. I am looking into upgrade, which iphone do you suggest 3GS or the iphone 4?

    I currently have the 1st generation iphone. I am looking to upgrade, which iphone would you suggest?  iphone 3GS or the iphone 4?  other?  

    Yes!! I have been told by many to buy the 3GS iphone. They love it and tell me I would, too.  But thanks to you, Dad and Michele, for your information that you have provided; I will purchase the iphone 4. With the great Facetime feature, I will be able to use it with my daughter who is stationed in Japan with her husband. By the way, I keep hearing that Apple will be making iphone in white. When will that happen?  Thanks again! 

Maybe you are looking for

  • Multiple MovieClips with same instance name

    I'm following a tower defence tutorial and part of the code is set up so I can build towers on the "grass" movie clip. I wanted to add more patches of "grass" and gave them all the same instance name so I can be able to place towers on them, but I ha

  • Save for web&.... the image exceeds the size for ....issue with AI on imac i7

    Hi, I just upgraded from using macbook Pro to Imac inte core i7 with 4GB. I use illustrator CS3 for high resolution documents i.e saving a Design for say maybe saving for iphone &ipod skin; a quality jpg that is 1300px(width) by 2000px(height. Genera

  • 9800 PRO [R360 Core] TV-OUT Issues

    Hello all! The card is performing great except for the Video-Out feature, somehow, the composite (as I dont have a S-Video able TV) exit, gives me a picture that is too dark and saturated in the tv. I'm using the MSI S-Video-Composite conversor. I've

  • XMLDocument print (no indent)

    Hallo, I need to print out the content of an XMLDocument in a String in a "flat" mode (without spaces or CRLF between tags). The method print() in XMLDocument seems the simplest way to print out... but it produces a formatted output (with spaces or C

  • Xfa.resolveNode is not writing values to the last line

    Hi, I have an issue with the xfa.resolveNode function, i have added at comment // at below coding at the line where the issues is occuring, please advise what can be done in order to make the loop works and enter the loop for the last line. Any help/