Help required urgently - Errors are taking over

So I went to the Apple store in Exeter (UK) to have my 3rd iPhone swapped as it had yet another problem. As usual they swapped it for another one with out to much issue.
I left the store and first I got a 'no service' issue. Then the phone started to crash. I went straight back to the store and they updated the firmware to 2.1 and they though the 'no service' might be resolved after a few hours when O2 (the UK service provider) updated their computer systems with the new the serial number of my new phone.
I went home and hooked it up to itunes. iPhone crashed. I did a restore as a new phone. Then the real problems started. I have been getting the following error messages.
- Attempting to copy the disk "Thomo's iphone" failed device not connected.
-Phone reset itself
- itunes could not connect to the iphone because an invalid response was recieved from the device.
also had an error message with the code " OXE8000035 "
So far the best I have been able to do is reset the phone and sync about 4GB of data then it crashes.
Does anyone have any idea what is going on?

PS: I've also tried to sync without the sim in but still no joy. When the phone is not crashing every thing else (ipod, cal, setting etc. all work ok)

Similar Messages

Help required urgent error 5161

Hi,
I have mapping where the i have deployed earlier successfully.Now when i try to deploy again,it says RTC 5161 error.please help me in this matter.I amost completed my work and now i am getting this.
your suggestions are highly appreciated.
thank you.

Robert is right. Please let me show more detail action: specailly, how to 'Run OWB from command line', which may cause confusion. when I use shortcut and run command line(C:\owb_home\bin\launch.exe C:\owb_home\owb\bin\admin ..\win32\owb.cl), the OWB client can be launch and log file can generate, but you got nothing.
The correct 'command line' should be as follow:
1 cd $OWB_HOME\owb\bin\win32
2 C:\OWB_HOME\owb\bin\win32\owbclient.bat 1>c:\temp\owb.log 2>c:\temp\owb_err.log
3 re-deploy to generate the error message
4 check the ORA- in the log file.
......

Java Mail,SMTP server not starting,help required urgently

Hi i have been working on java mail .Yesterday it was working ok but today suddenely i am getting this thing.its not starting the smtp server i guess,just exiting and get the command prompt ..dont know what to do.help required how to go about this error
am pasting the debug information.please check and let me know
the compilation ,smtp server and others are all valid
thanks
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\Pavan>cd C:\Program Files\Java\jdk1.5.0_07\bin
C:\Program Files\Java\jdk1.5.0_07\bin>javac jdbcExample3.java
C:\Program Files\Java\jdk1.5.0_07\bin>java jdbcExample3 smtpserver address
DEBUG: JavaMail version 1.4ea
DEBUG: java.io.FileNotFoundException: C:\Program Files\Java\jdk1.5.0_07\jre\lib\
javamail.providers (The system cannot find the file specified)
DEBUG: !anyLoaded
DEBUG: not loading resource: /META-INF/javamail.providers
DEBUG: successfully loaded resource: /META-INF/javamail.default.providers
DEBUG: Tables of loaded providers
DEBUG: Providers Listed By Class Name: {com.sun.mail.smtp.SMTPSSLTransport=javax
.mail.Provider[TRANSPORT,smtps,com.sun.mail.smtp.SMTPSSLTransport,Sun Microsyste
ms, Inc], com.sun.mail.smtp.SMTPTransport=javax.mail.Provider[TRANSPORT,smtp,com
.sun.mail.smtp.SMTPTransport,Sun Microsystems, Inc], com.sun.mail.imap.IMAPSSLSt
ore=javax.mail.Provider[STORE,imaps,com.sun.mail.imap.IMAPSSLStore,Sun Microsyst
ems, Inc], com.sun.mail.pop3.POP3SSLStore=javax.mail.Provider[STORE,pop3s,com.su
n.mail.pop3.POP3SSLStore,Sun Microsystems, Inc], com.sun.mail.imap.IMAPStore=jav
ax.mail.Provider[STORE,imap,com.sun.mail.imap.IMAPStore,Sun Microsystems, Inc],
com.sun.mail.pop3.POP3Store=javax.mail.Provider[STORE,pop3,com.sun.mail.pop3.POP
3Store,Sun Microsystems, Inc]}
DEBUG: Providers Listed By Protocol: {imaps=javax.mail.Provider[STORE,imaps,com.
sun.mail.imap.IMAPSSLStore,Sun Microsystems, Inc], imap=javax.mail.Provider[STOR
E,imap,com.sun.mail.imap.IMAPStore,Sun Microsystems, Inc], smtps=javax.mail.Prov
ider[TRANSPORT,smtps,com.sun.mail.smtp.SMTPSSLTransport,Sun Microsystems, Inc],
pop3=javax.mail.Provider[STORE,pop3,com.sun.mail.pop3.POP3Store,Sun Microsystems
, Inc], pop3s=javax.mail.Provider[STORE,pop3s,com.sun.mail.pop3.POP3SSLStore,Sun
Microsystems, Inc], smtp=javax.mail.Provider[TRANSPORT,smtp,com.sun.mail.smtp.S
MTPTransport,Sun Microsystems, Inc]}
DEBUG: successfully loaded resource: /META-INF/javamail.default.address.map
DEBUG: !anyLoaded
DEBUG: not loading resource: /META-INF/javamail.address.map
DEBUG: java.io.FileNotFoundException: C:\Program Files\Java\jdk1.5.0_07\jre\lib\
javamail.address.map (The system cannot find the file specified)
C:\Program Files\Java\jdk1.5.0_07\bin>

The debug output doesn't show an obvious problem. You're
going to have to actually debug your program. A debugger
might be helpful.

Help required urgently please help

i am facing problem on oracle 9i platform the problem is
ORA-00379: no free buffers available in buffer pool DEFAULT for block size 16K
WHILE I AM EXECUTING THIS SQL COMMAND
SELECT * FROM PR_RMRDDATA_M
PR_RMRDDATA_M IS ONE OF MY VERY BIG TABLE

BPeasland wrote:
I guess a response after 4.5 months means the help was not required urgently. ;)
Cheers,
BrianGlance at the timestamps again...
It wasn't 4.5 months. It was a year and 4.5 months.
<insert smiley emoticon here>
Additionally, the original poster abandoned the thread after they stopped shouting at everyone.
Their username profile shows they almost never return to mark anything "resolved".
This thread is now locked to prevent more "me too" resurrection posts.

Black Area taking over screen

So whenever I press play in logic express this huge black area takes over the screen behind the play head and moves along with the playhead. I don't know what to do to get rid of this huge black/dark display.

It's virtually the same program these days.
It would help if the OP posted the version he/she was using and what updates are installed.
pancenter-

Can anybody help its urgent error :RPE-02018

Can any body help me inthis error, actually i was executing the mappig on regular basis but today i found this error
" RPE-02018: Oracle Workflow schema OWF_MGR on host ZAINBIDB cannot be accessed using service BIPROD through port 1521. Please check the location details and try again."
Followed by :
"Io exception: Got minus one from a read call."

Hi, we have found this error when configuration parameters in database where not correct. Each time a process flow with a lot of process in parallel was executed, a process failed.
I can't remember the exact parameter to change to correct this error (we had some other errors due to configuration parameters) but I think it was by changing the optimizer_mode to FIRST_ROWS. Ask your DBA to take a look to DB parameters and look for the error message in metalink, I think there's an entry for this error.
Regards
ANA GH

GroupWise Help Required || Urgent

hi Experts,
please help me on below queries -
(A) Create Contacts in Global Address book in Novell GroupWise server manually. i have exchange servers in my Organization and i want to view my exchange mailboxes in GroupWise Address book so that my users can directly send mails to exchange users via Address lists.(external contacts in exchange are known as mail contacts/contacts. also i dont want to use any third party tool for Dirsync/migration purpose).
(B) Set Forwarder on GroupWise Mailbox so that new incoming mail will be deliver to remote domain recipient (exchange mailbox) with or without delivering to GroupWise Mailbox locally). i don't want to configure client rules to achieve this goal. i need this to be done via central administration tool for GroupWise servers.
(C) if we create External Contact with different Email Domain Name (i.e. @XYZ.Com, which is my exchange SMTP Domain) and we have Primary Domain as @ABC.Com (this is my GroupWise SMTP Domain), in this condition can we assign additional email address to external User. so that my external user will have both GroupWise SMTP Email Address and Exchange SMTP Address. in this case new mails to my GroupWise ID should be delivered to my exchange Mailbox because i don't want to keep mailbox in Groupwise
it is really urgent and any information or step by step docs or Urls are really appreciated.
i have gone through the non-groupwise domain creation document but not sure what server and domain name entries i have to put during configuration for Non-Groupwise domain and external users. also what would be GIWA configuration. please provide me the SOPs if any one has already done this in past.
regards,
Aanand Karki

AanandKarki wrote:
>
> hi Experts,
>
> please help me on below queries -
>
> (A) Create Contacts in Global Address book in Novell GroupWise server
> manually. i have exchange servers in my Organization and i want to
> view my exchange mailboxes in GroupWise Address book so that my users
> can directly send mails to exchange users via Address lists.(external
> contacts in exchange are known as mail contacts/contacts. also i dont
> want to use any third party tool for Dirsync/migration purpose).
>
> (B) Set Forwarder on GroupWise Mailbox so that new incoming mail will
> be deliver to remote domain recipient (exchange mailbox) with or
> without delivering to GroupWise Mailbox locally). i don't want to
> configure client rules to achieve this goal. i need this to be done
> via central administration tool for GroupWise servers.
>
> (C) if we create External Contact with different Email Domain Name
> (i.e. @XYZ.Com, which is my exchange SMTP Domain) and we have Primary
> Domain as @ABC.Com (this is my GroupWise SMTP Domain), in this
> condition can we assign additional email address to external User. so
> that my external user will have both GroupWise SMTP Email Address and
> Exchange SMTP Address. in this case new mails to my GroupWise ID
> should be delivered to my exchange Mailbox because i don't want to
> keep mailbox in Groupwise
>
> it is really urgent and any information or step by step docs or Urls
> are really appreciated.
This is all handled by our new GroupWise/Exchange coexistence solution.
There's no need to create anything manually on either side. With
coexistence configured, users on both sides automatically sync as
contacts on the other side, plus you also get free/busy searching.
Here's the documention on coexistence.
http://www.novell.com/documentation/.../bookinfo.html
Please note this also requires some additional licensing. Please
contact your friendly Novell sales rep or partner for more assistance.
Your world is on the move. http://www.novell.com/mobility/
We know what your world looks like. http://www.novell.com/yourworld/

Help required URGENTLY regarding 9iASWE - logged in Username

Hi,
I have installed Oracle 9iASWE. I have been able to create services and access it through ptg/rm.
One of my service needs to access the username through which the user has logged in. I have tried creating the bind variable :_User as a input parameter in my service. But i have not been able to get the user name . Can anybody tell me how do i exactly get the user name.
Please reply if more details are required to get the solution.
Please reply ASAP.
email: [email protected]
regards.

Hi,
Thanks for the reply. But we are not using URL Adapter.
We are using a SQL Adapter and calling a stored procedure from it.
We are using the :_User variable to get the username, but cannot figure out a way to pass it from the SQL Adapter to the procedure.
Please help.
regards
Kamlesh

J2ME Help required (URGENT !!!)

Hello everyone,
Well I'm a newbie to this J2ME thing, I am working on a project right now which requires me to develop an application for my mobile phone Sony Ericsson W810i. This application accesses the on board camera and take images after every 1 sec and keep on saving the last 2 images in 2 different files or buffers. Once the images are obtained, Sobel Filter (Image processing) is applied on it for edge detection. Can anyone please help me with this all, I am really desperate and time is running out.
At the moment, I found this code on Sony Ericsson Developer forums which works perfectly fine with my W810i, the link to the code is as follows,
http://developer.sonyericsson.com/site/global/techsupport/tipstrickscode/java/p_java_0403.jsp
Well this takes one image and shows it on the canvas, however I am still trying to figure out a way to remove the question it asks whenever i press the button SNAPSHOT, it asks "Do u want to allow the application to access Camera?", is there a way to remove this as well. Please let me know.
Last thing, the getSnapshot is used as vc.getSnapshot(null), i read and changed it to vc.getSnapshot("encoding=jpeg");
This works fine with my mobile as well, but now i cant find any help on how to apply image processing on this encoded jpeg !!! Well please reply, as much as u know, u dun have to answer all the questions, any information regarding this is helpful, I'll be extremely grateful !!!
Thanks a lot,
Regards,
Mubin Khan

Hi mobeenkhan
You know, people are helping out voluntarily here. So it always helps to ask nicely. :-)
This is what you need to know (not really, since you probably won't use it)
A signed MIDlet may request higher access rights for specific actions by asking for them in the MIDlet-Permissions attribute of the MIDlet’s application descriptor.
The permission name for audio / video recording is:
javax.microedition.media.control.RecordControl
The permission name for camera snapshot is:
javax.microedition.media.control.VideoControl.getSnapshot
Try a Google search for "jad permissions midlet media camera".
And check whether, in your SE W810i, you can set the pernission for camera ( it may be called media access etc.) to 'Ask once per application' or something like that. This will be set from the File Manager (or Application manager, I haven't handled the W810i, only SE I've dealt with is the k700i), not when the app is running.
If your application isn't digitally signed, you probably won't be able to select a setting like 'Never Ask' -- and a digital signature can be fairly expensive, not something you might want to go for unless you're going to earn something out of marketing your products.
Be nice to everybody :-)
Darryl

Help Required - Urgent

I am submitting a concurrent program and inside that there is a for loop and in this loop a oracle standard API is called which i can not touch. This API submits multiple concurrent requests for a particular report with in a for loop so for a single run of main concurrent program a number of requests for the report are generated.
now my problem is after firing the concurrent processes for the reports the main program goes in to the completion state but the child processes(reports) are still in pending state.
i want to make the relationship between the parent and child program.so that parent should wait until all the child gets completed.
ANY help will be appericiated.

Have you check your initXXXXXX.ora file
and make sure there is enough SGA to your instance ???
if the error message is os level , make sure your Oracle software
installed completely.....

In need of immediate help with FCP new user taking over colleagues position

Good Morning. I am in urgent need of some help with a specific final cut pro question. My coworker and I have been working on a video project for our employer, a university. He ran the editor (FCP) and I ran the logistics of setting things up, keeping the contacts and scheduling, etc.
He has left until late August and there are two major typos in his work which is posted to the web at the moment. I need to correct these typos and have less than a faint idea of how to do it.
First of all, what is the file's last three letters? (.doc, .mov, etc...)
Second, can I edit this as easily as I think I can? Just click in the text file along the bottom timeline and edit that way?
How do I export the movie as an mp4 file after i have edited it.
Anything else that would be deemed helpful is always appreciated!
I really appreciate the help. I was never trained on this program because I never needed to be. Unfortunately, as it turns out, I did.
Thanks for the help!

You need to locate the Project file. Which will be somewhere in your colleague's User space.
In the Finder, press command and F to activate the Find function.
Make sure the following parameters are set:
Search *This Mac* and Contents
Kind is Documents
Type the project name.
The icon looks like this:
Double click it to launch Final Cut Pro with the project.
To locate the text overlay, click on the Timeline to make it active. Use the down arrow on your keyboard to jump from one cut to the next. The text overlay will look similar to this:
Double click on the Text clip. This will place it in the Viewer (the left "monitor").
Click the "Controls" tab above the Viewer and make your changes. Press Return.
Clicking anywhere in the Timeline once more will update it.
Make sure that no clips are selected and the Timeline is the active window.
Go to the menu bar: File > Export > Using QuickTime Conversion.
In the window that opens, make sure that Format is set to QuickTime Movie.
Click the Options button. Look at the top of the next window.
Does it say Compression Setting: H264? If it does, great.
If not, click the settings button and choose H264 from the *Compression Type* button.
At bottom left, drag the Quality slider to Best. Click OK.
This brings you back to the previous window.
Click on Size if you need to change something -there are a number of presets, but you can choose a custom size if you wish. Click OK.
That window is dismissed and returns you to the Save dialog.
Type a name and choose a destination for your file.
Message was edited by: Nick Holmes

Table Maintanance Help Required-urgent

Hi All,
I generating table maintanance generator for the table zuser_Secobjects. In this table GUID is a primary key and APPLN,APPLN_TYPE,PARTNER_TYPE are the non primary keys. I am using two screens method here. on both screens i am not showing GUID ( i am hiding this field in screen1 and screen 2) whenvere new record is created for every record guid is going to create. now my reuirement when i click on position(pushbutton) name in screen 1 it has to show APPLN,APPLN_TYPE,PARTNER_TYPE where as these 4 fields are non primary keys . i am getting uniqire record using guid. so i am keeping guid as primary key.i can't keep these 4 fields as primary keys in the table zuser_secobjects.
anybody can faced this kind of problem if so please let me know whow to approach in this case.
thanks,
maheedhar.t

Hai Maheedhar,
I have also faced the related problem.
Please refer the below links.
It will helps you a lot.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/abap/how%20to%20implement%20events%20in%20table%20maintenance.doc
Table Maintenance generator is required to do Manual entries in the Table. If the requirement is to update the table only programmatically and not manually then table maint. generator is not required.
Manual entries in table can be maintained ( New record can be inserted / existing can be modified ) using transaction SM 30, if the table maintenance for the table is generated.
Don'forget to activate it.
How to activate Table maint.
Goto SE11 and open the table.
Click UTILITIES -> Table Maint. Generator, Enter the details and click on Save. Then activate the table.
Please refer the below links.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/abap/how%20to%20implement%20events%20in%20table%20maintenance.doc
Reward points if it helps you.
Regds,
Rama chary.Pammi

Purchase Requisition Release Strategy ---- help required urgently.

Hello all,
I have one severe problem in PR release strategy. Whenever we create a PR the Release is triggering but the name of the processer who will release this PR is not triggering. I have done the PO13, where the HR positions are maintained as per the release levels and PA30 where the SAP user ids of these processers is given. But still the processor name is not triggering. Is there any other transaction where we have to maintain certain data?? Kindly help me as this is an urgent issue.
I will be very glad and give points to all of u.
Thanks and Regards,
Umakanth.

hi,
Check your release codes and its assignments in the release strategy..
Also do check whether the PR is liable to trigger for the given characteristics as compared to your PR which you are making...
Regards
Priyanka.P

Printing a JPanel..............HELP required URGENTLY

I m doing my application using JPanel which contains labels, textfields and buttons.
Now I want to print this panel. Is it possible to print a JPanel. IF yes, then plz help me as I m stuck up into this big problem and due to which I m not able to complete my project.
I tried many codes of printing, but I wasn�t able to print it. One of the code is given below which gives me an error in MouseListener and MouseEvent.
//*********** Main User Interface Class ************
public class ComponentPrintingTestUI extends JFrame implements MouseListener {
//private static MyTextPane myTextPane;
private static MyJPanel myJPanel;
public ComponentPrintingTestUI() {
initComponents();
private void initComponents() {
JFrame frame = new JFrame("ComponentPrintingTest");
//JPanel contentPanel1 = new JPanel();
//JPanel contentPanel2 = new JPanel();
JPanel contentPanel3 = new JPanel();
JPanel contentPanel4 = new JPanel();
contentPanel3.setMaximumSize(new Dimension(270,170));
contentPanel3.setMinimumSize(new Dimension(270,170));
contentPanel3.setPreferredSize(new Dimension(270,170));
//JButton textPrint = new JButton("Print TextPane");
//textPrint.addMouseListener(this);
JButton panelPrint = new JButton("Print JPanel");
panelPrint.addMouseListener(this);
//myTextPane = new MyTextPane();
//myTextPane.setEditable(false);
myJPanel = new MyJPanel();
//contentPanel1.add(myTextPane, BorderLayout.CENTER);
//contentPanel2.add(textPrint, BorderLayout.CENTER);
contentPanel3.add(myJPanel, BorderLayout.CENTER);
contentPanel4.add(panelPrint, BorderLayout.CENTER);
//frame.add(contentPanel1, BorderLayout.NORTH);
//frame.add(contentPanel2, BorderLayout.CENTER);
frame.add(contentPanel3, BorderLayout.NORTH);
frame.add(contentPanel4, BorderLayout.SOUTH);
frame.setSize(1280,1024);
frame.setVisible(true);
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
public void mouseClicked(MouseEvent arg0) {
// EditorFrame extends JFrame and has all the, well, editing stuff
//EditorFrame frame = ClerkUtilities.getEventSourceFrame(e); // method simply grabs the source frame
//PrintableTextPane tp = frame.getTextPane();
PrinterJob printJob = PrinterJob.getPrinterJob();
//PageFormat pf = printJob.defaultPage();
//pf.setOrientation(PageFormat.LANDSCAPE);
printJob.setPrintable(myJPanel);
if (printJob.printDialog())
try
printJob.print();
} // end try
catch (Exception ex)
ex.printStackTrace();
} // end Exception catch
} // end if
//*********** Custom JPanel Class *************
public class MyJPanel extends JPanel implements Printable {
public MyJPanel() {
initComponents();
private void initComponents() {
this.setMaximumSize(new Dimension(270,170));
this.setMinimumSize(new Dimension(270,170));
this.setPreferredSize(new Dimension(270,170));
this.setBackground(Color.GRAY);
public void paint(Graphics g) {
super.paintComponent(g);
Graphics2D g2 = (Graphics2D) g;
g2.drawString("Sample drawstring", 20, 20);
g2.drawString("Bottom line", 20, 150);
public int print(Graphics g, PageFormat pageFormat, int pageIndex) throws PrinterException
/* get component width and table height */
Dimension dimension = this.getSize();
double compWidth = dimension.width;
double compHeight = dimension.height;
System.out.println("Comp width: " + compWidth);
System.out.println("Comp height: " + compHeight);
Paper card = pageFormat.getPaper();
card.setImageableArea(0, 0, 153, 243);
card.setSize(153,243);
pageFormat.setPaper(card);
pageFormat.setOrientation(PageFormat.LANDSCAPE);
/* get page width and page height */
//double pageWidth = pageFormat.getImageableWidth();
//double pageHeight = pageFormat.getImageableHeight();
//double scale = pageWidth / compWidth;
//double scale = compWidth / pageWidth;
//System.out.println("Page width: " + pageWidth);
//System.out.println("Page height: " + pageHeight);
//System.out.println("Scale: " + scale);
/* calculate the no. of pages to print */
//final int totalNumPages= (int)Math.ceil((scale * compHeight) / pageHeight);
if (pageIndex > 3)
System.out.println("Total pages: " + pageIndex);
return(NO_SUCH_PAGE);
} // end if
else
Graphics2D g2d = (Graphics2D)g;
g2d.translate(pageFormat.getImageableX(), pageFormat.getImageableY());
System.out.println("Coords: " + pageFormat.getImageableX() + ", " + pageFormat.getImageableY());
g2d.translate( 0f, 0f );
//g2d.translate( 0f, -pageIndex * pageHeight );
//g2d.scale( scale, scale );
this.paint(g2d);
return(PAGE_EXISTS);
} // end else
} // end print()
//*********** Starter Class **********
//public class ComponentPrintingTest {
* @param args
public static void main(String args[]) {
java.awt.EventQueue.invokeLater(new Runnable() {
public void run() {
ComponentPrintingTestUI ui = new ComponentPrintingTestUI();
//ui.setVisible(true);
I m a newbie to java and don�t have any idea abt printing of Panel. Plz Plz Plz help me.
Thanks in advance.

mansi_b85, next time when you post a question:
- please use code tags (http://forum.java.sun.com/help.jspa?sec=formatting);
- don't flag your question as urgent which you have done in 3 of your 4 posts here. This implies that your question is more important than other people's questions and/or your time is more valuable than ours (ours as in people who (try to) answer your question). This is considered rude;
- try writing whole words instead of that horrible sms-speak (plz and abt)
- post swing related questions in the swing forum.
Thanks.

GroupWise 8.0.3 Help Required || Urgent

hi Experts,
please help me on below queries -
(A) Create Contacts in Global Address book in Novell GroupWise server manually. i have exchange servers in my Organization and i want to view my exchange mailboxes in GroupWise Address book so that my users can directly send mails to exchange users via Address lists.(external contacts in exchange are known as mail contacts/contacts. also i dont want to use any third party tool for Dirsync/migration purpose).
(B) Set Forwarder on GroupWise Mailbox so that new incoming mail will be deliver to remote domain recipient (exchange mailbox) with or without delivering to GroupWise Mailbox locally). i don't want to configure client rules to achieve this goal. i need this to be done via central administration tool for GroupWise servers.
(C) if we create External Contact with different Email Domain Name (i.e. @XYZ.Com, which is my exchange SMTP Domain) and we have Primary Domain as @ABC.Com (this is my GroupWise SMTP Domain), in this condition can we assign additional email address to external User. so that my external user will have both GroupWise SMTP Email Address and Exchange SMTP Address. in this case new mails to my GroupWise ID should be delivered to my exchange Mailbox because i don't want to keep mailbox in Groupwise
it is really urgent and any information or step by step docs or Urls are really appreciated.
i have gone through the non-groupwise domain creation document but not sure what server and domain name entries i have to put during configuration for Non-Groupwise domain and external users. please provide me the SOPs if any one has already done this in past.
regards,
Aanand Karki

If you do all the above, the GroupWise mailboxes would seem to not be used any longer. Why would you want to do all of this in the first place?

Help required urgently - Errors are taking over

Similar Messages

Maybe you are looking for