Help required with SMS in Java

Respected Group Members,
How to develop SMS application in Java, what our requirement is that when I run this application it will fetch record from the database lets say "account balance" and than SMS it to some paticular mobile number , my questions are as follows:
1) what API will I have to use for developing SMS applications in Java.
2) what actually will be the flow of this application I mean where will it be hosted? will it connect to SMS Server in short please explain me the flow of this application i.e to which server will it first be connected and so on...
3) any useful web site or resources?
4) what in general is the flow of any SMS?
5) any useful suggestions or any thing else than please guide me?
I would be waiting for your precious replies , pleae reply as soon as possible.
Thanking You,
Taqi Raza.

this has been asked time and again, so a few seconds in the search functionality should provide you with plenty of information.
As you may be too stupid to type in your own search terms:
http://www.altavista.com/web/results?itag=ody&q=SMS+in+Java&kgs=0&kls=0 yields a few thousand results (at least).

Similar Messages

Help required with Photoshop Elements 4.0 this has been installed on my new Toshiba laptop with windows 8.1 for some 18 months and operating well. Now it will not open, message pops up saying "attempt to access invalid address" then "application not respo

Help required with Photoshop Elements 4.0 this has been installed on my new Toshiba laptop with windows 8.1 for some 18 months and operating well. Now it will not open, message pops up saying “attempt to access invalid address” then “application not responding” Suggestions how to access would be much appreciated. Tks. Stuart

What is the size of your hard disk? PSE 4 is a very old program and I suspect it is not able to access the entire hard disk on your machine. Just a thought here.

Help require with installing Adobe Acrobat onto my Macbook Pro Retina.

Help require with installing Adobe Acrobat onto my Macbook Pro Retina.
I have successfully installed all of my creative cloud apps with the exception being acrobat.
I cannot print from Indesign to PDF.
I have unistalled, reinstalled and still no Adobe Acrobat.
I now have to go back to Windows 8 and create the PDF's there.
Any one know how to get around this issue?
Thanks in advance
Kelvin

OSX has effectively killed the ability to print to pdf, (print to pdf eliminates most of the "Rich features" of current pdf).
Export from InDesign, always, excpet for the 1% of the time where you know why print to pdf would produce a better result.

Help required with (soundcard) connection / settings, thanks in advan

Help required with connection / settings between a Creative Sound Blaster Audigy Platinum EX (soundcard) and a Creative DTT3500 Digital (5. speakers).
The problem
No sound from any of the speakers. (Exception can plug in headphones at front)
Background
My computer has been recently upgraded at my local computer shop and all programs re-installed (including driver update from Creative's website). However after reconnecting speakers and restoring the original settings I?m getting no sound from any of the speakers. I?ve followed all the available advice/instructions I can find on this website and manuals to no avail.
Set-up
Physical
(Digital DIN) Speakers/decoder amplifier (DTT3500) connected to the (digital out) soundcard (Audigy Platinum EX) using minijack to DIN cable. (As per instruction manual)
Software
Creative Audio Consul ? setting as per instructions, however have tried variations in vain. (Note: above tabs there is a select device box with SB Audigy [A0000] in it ? only option. Just wondering what [A0000] means?)
Your advice please. A simple step by step guide would be appreciated, many thanks in advance, Jon

"My computer has been recently upgraded at my local computer shop and all programs re-installed (including driver update from Creative's website). "
Do you have the original installation disk?
If so, try installing THOSE drivers, ESPECIALLY if it worked before. Be sure to uninstall what is there now, first.
Its natural for most people to want the 'latest' drivers for their hardware. However:
After experiencing some difficulties with some CL 'updates' for certain products, I now avoid them UNLESS I am having a PROBLEM with the existing drivers.

Help Required with Enterprise Java Trainings

Conference and Workshop on Java Enterprise, Agile, JDK, Mobile, Spring, BPEL, EJB 3, Eclipse, Java EE, Cloud Computing and more..
If you work on Java there�s no way you can afford to miss the Daring Java Conference @ Developer Summit 2008, being held May 22-23 in Bangalore. And there�s no reason to either. The first-of-its-kind conference offers the ultimate value of leading-edge skills and luminary speakers from the works over. From frameworks and middleware technologies to Open Source Java, Java Mobile, and real time technologies, you will come back to work more productive and valuable to your company. So if you�re keen on taking your knowledge and your capabilities beyond mere industry standards, you know where you need to be!
To know more about the benefits and the registration procedure visit the summit on the Web *http://developersummit.com/conference.html#jav [http://developersummit.com/conference.html#java] a*.
On May 23 2008, Java technology transitions into teenage years. Celebrate this achievement at the �Java Teenage Party� on the evening May 23, which will conclude the Daring Java conference.
You will not find talks of this caliber at other events. Some very good speakers are already lined up (*http://developersummit.com/speakers.htm [http://developersummit.com/speakers.html] l*)
�     The Future of Enterprise Java by Jim Farley
�     Building Java-based Cloud Architectures by Amazon's Jinesh Varia
�     Using Persistent Java Objects in Multiple Tiers by Craig Russell
�     Enterprise Mashups Using Java by Greg Murray
�     Java Performance Tooling by Holly Cummins
�     Beginning Drools - Rule Engines in Java by Brian Sam-Bodden
�     Develop Secured Ajax Applications by Olivier Poupeney
�     Leveraging Open Source in Java EE Projects by Peter Thomas
�     Web Services Development in Java without JEE by Sanjaya Karunasena
�     Ajax and Comet: Implementing the Real-Time Web by Alessandro Alinone
�     EJB 3 Java Persistence API in Action by Deb Panda
The workshops include:
�     Workshop: Rich Internet Applications with Flex and Java
�     Workshop: Master Class: The Elements of User Experience
�     Workshop: SQL Server 2008 Deep Dive
�     Workshop: Java Data Objects Tutorial
�     Workshop: Wicket, Spring and Hibernate: Putting It all Together
�     Workshop: Harnessing Domain-Specific Languages (DSLs)
�     Workshop: Parachuting Into Brownfields
�     Workshop: Acceptance Test-Driven Development
You can register online: *http://developersummit.com/registration.htm [http://developersummit.com/registration.html] l*
Thanks,
#3/18, Corporation Buildiing, Residency Road, Bangalore - 560 025
ph +91 80 4005 1000 Fax: +91 80 2221 0148 Email: *[email protected] [[email protected]] m*
Conference venue: J N Tata Auditorium IIsc, Bangalore- 560025

People, Do register

Immediate help required with this job scheduling scenario

I have a job that needs to run a procedure hourly but not between 6:00 AM to 8:00 AM and 6:00 PM to 8:00 PM.
Can anyone help me with how to schedule this job.

If you use a window the job would only execute if the window opens. If for some reason the window did not open then the job would not execute.
Windows should be used to specify which resource plan should be active for the time interval.
In this case you are better off using FREQ=DAILY; BYHOUR=; and specify the hours.

Help required with Select statment..... ASAP pls

HI All,
Let me desc my table first .
01                             NOT NULL VARCHAR2(5)
02                             NOT NULL VARCHAR2(5)
03                             NOT NULL VARCHAR2(5)
04                             NOT NULL VARCHAR2(5)
31                                                    This is how table has been created(Note:not by me)
select name from od_shift where year=2011 and month='Feb' and "02"='W"{code}-->no doubt this is working fine
My problem is ...here rather putting the number directly ("01","02","03"....."31")
I need to take it from the first two digits of date('01-feb-2011')
like {code}
select name from od_shift where year=2011 and month='Feb' and to_char(to_date('01-feb-2011','dd-mon-yyyy'),'dd')='W" but this is not working
kindly help me with this .
Edited by: Basva on Mar 8, 2011 4:53 AM

Pleiadian wrote:
You could do a case statement. It's not elegant, but it works
Edit: smon's solution is better if pl/sql is an optionI disagree, it's quite elegant given the cirumstances of that sick table. And it definitely beats a dynamic SQL solution.
@Basva - when will you realize that your table is no good, and needs to be normalized into a more traditional relational table?
Regards
Peter

Help required with an image

Hi all,
I wonder if someone can help me with the following issue.
If you see the attached image in the top left hand corner their is a square box which is a different shade to the rest of the header.
I need to rectify this and blend it in with the rest on the header colour; however, I do not know how to do this and would appreciate some assistance in doing this.
I'm a noobie to photoshop so any help is much appreciated.

It seems you've copied another portion of the texture to overlay something you didn't want seen...
As opposed to copy/paste of a rectangular region, this is almost a textbook use for Content Aware Fill, which should (assuming it works properly) match the pattern and blend the colors.
Try selecting just the blemish or whatever you're trying to cover, then expand the selection a few pixels, then Edit - Fill - Content Aware.
-Noel

Help required with User exit logic

Hi gurus,
Please help me with the logic I wrote for the user exit for a PP Work Center View extract structure. Here is the details of the add on fields: VGW01, VGW02, VGW03, STEUS(from table PLPO); DataSource: 2LIS_04_P_ARBPL,
data: l_s_pp1 like MC04P_0ARB(extract structure of 2LIS_04_P_ARBPL),
l_tabix like sy-tabix,
lv_VGW01 like PLPO-VGW01.
lv_VGW02 like PLPO-VGW02.
lv_VGW03 like PLPO-VGW03.
lv_STEUS like PLPO-STEUS.
tables : PLPO.
case i_datasource.
when '2LIS_04_P_ARBPL'.
loop at c_t_data into l_s_pp1.
select single vgw01into lv_vgw01
from PLPO
where field = l_s_pp1-field.
if sy-subrc = 0.
l_s_pp-zzvgw01 = lv_vgw01.
l_s_pp-zzvgw02 = lv_vgw02.
l_s_pp-zzvgw03 = lv_vgw03.
l_s_pp-zzsteus = lv_steus.
endif.
modify c_t_data from l_s_pp1 index l_tabix.
endloop.
Any additional comments welcome. Thanks in advance.

Hi,
Try coding as per the below code
case i_datasource.
When '2LIS_04_P_ARBPL'.
DATA: lt_data TYPE TABLE OF MC04P_0ARB.
FIELD-SYMBOLS: <ls_data> TYPE MC04P_0ARB.
Internal table for
TYPES:
        BEGIN OF ty_tbl1,
                 lv_VGW01 TYPE PLPO-VGW01,
                 lv_VGW02 TYPE PLPO-VGW02,
                 lv_VGW03 TYPE PLPO-VGW03,
                 l_bmsch TYPE XXXX-XXXX,
                 l_plnnr TYPE XXXX-XXXX
                 l_datuv TYPE XXXX-XXXX
                 l_aennr TYPE XXXX-XXXX
                 l_plnkn TYPE XXXX-XXXX
                 l_plnal TYPE XXXX-XXXX
        END OF ty_tbl1.
DATA:
         lt_tb1 type standard table of ty_tbq,
         ls_tb1 type ty_tb1.
lt_data[] = c_t_data[].
Read data into internal memory using jOins
select aVGW01 aVGW02 aVGW02 aVGW02 bbmsch bplnnr bdatuv baennr bplnkn bplnal into into CORRESPONDING FIELDS OF TABLE
lt_tb1 from PLPO as a innerjoin XXXX as b where aXXXX=bXXXX.
use the internal table to get the data to the enhaced fileds
LOOP AT lt_data ASSIGNING <ls_data>.
    read table lt_tb1 into ls_tb1
         with key XXXXX = <ls_data>-XXXX .
    if sy-subrc eq 0.
      <ls_data>-lV_VGW01 = ls_tb1-lv_VGW01,
      <ls_data>-lV_VGW02 = ls_tb1-lv_VGW02,
      <ls_data>-lV_VGW03 = ls_tb1-lv_VGW03,
      <ls_data>-bmsch    = ls_tb1-bmsch,
      <ls_data>-plnnr    = ls_tb1-plnnr,
      <ls_data>-datuv    = ls_tb1-datuv,
      <ls_data>-aennr    = ls_tb1-aennr,
      <ls_data>-plnkn    = ls_tb1-plnkn,
      <ls_data>-pln1l    = ls_tb1-plnal.
      MODIFY lt_data FROM <ls_data>.
    endif.
ENDLOOP.
REFRESH c_t_data.
c_t_data[] = lt_data[].
Note that the code is not written with the exact fields. Change the fields where necessary(also i have joined only 2 tables if needs to be joind form more than 2 table change the join statement accordingly).
Thanks,
Nagarjuna
Edited by: Nagarjuna Reddy on Oct 20, 2011 3:39 AM

Help required with understanding References and finalizers

Background
I have an online Application which has been developed over 6 years now. It is a Website CMS and runs 300 simultaneous sites per webserver. For the first time I am experiencing capacity / performance issues. I switched from SUN Java to JROCKIT in 2006 which speeded evertything up by 200% but now I have periods of the day where The memory fills up and I get Swapping which leads to 100% cpu utilization - mainly in I/O. I have upped the RAM in the server as a solution and now I want to see if I can do anything to reduce my memory footprint.
Specifically : The question
I have captured stats which I can view in Mission Control and it shows that the number of Weak References increases continuously over a 4 hour period (also the number of Phantom references shows similar behaviour). Therefore I suspect a memory leak - Also I suspect that this is of my own making since I have not realy had to deal with this before. The thing is I cannot clearly see how to proceed and identify what my error is.
I have spent a couple of weeks reading loads of docs about weak / stong etc.. references but I realy need a bit of help with zeroing in on a starting point. I know that I release objects by setting them to null but I now expect that this is not realy good enough.
Anyway - before I ramble too long, If there is anyone with relevant experience and a few minutes I would be very gratefull to hear from them.
Regards
Jonathan Carter
Glimworm IT
Amsterdam

Hi Jonathan,
Reference objects and finalizers are a frequent cause of performance issues. The reason is that 1) objects tend to be kept alive longer, leading to an increase in live data and more frequent GC and 2) processing of these objects during GC is expensive, which leads to more time spent in GC, i.e. long pause times.
There are various ways you can approach your issue. One is to use -Xverbose to see what you find. If you are using JRockit R27.2 or later, run with "-Xverbose:referents" to get a list of all reference objects at every GC. More info:
http://edocs.bea.com/jrockit/jrdocs/refman/optionX.html#wp1029960
Note that you can enable verbose logging during runtime through "jrcmd <pid> verbosity set=referents" and later disable it using "jrcmd <pid> verbosity set=referents=warn". No JVM restart required.
If you send your JRA recordings to jrockit-improve AT bea DOT com, we'll try to take a look at them.
-- Henrik

Can anyone help me with a simple java programm in linux?

i just started learning how to write java code in high school and we had an assignment which required us to write a program that would calculate the amount of kilometers u traveled into miles and vis-versa but we had to give the user a chance to pick which one they had to do and our teacher told us to give them the option using 1 to calculate from kilometers to miles and 2 to calculate miles to kilometers .....
and i got confused so please help

Encephalopathic wrote:
First figure out an algorithm: how would you solve this problem just using pencil and paper. Once you know your equations and steps to take, then translate to Java. Why not give it a try first? You can't break your computer by doing this. Then come back with your code if you are still stuck.
Good luck.galaxyboy25,
This is very good advice. Getting into the habit of working out problems on paper/whiteboard first will save you many a headache later on. I'm relatively new to programming as well (only about 2 years professional experience) but this technique has helped me immensely in my work. In my mind, writing code is easy--figuring out what to write is where the real challenge is.
One other thing. In addition to sketching your problem on paper, it always helps to break a problem into very small, simple, and easily solvable pieces. Then put them together. In doing this you will find that not only will this make your task of problem solving much easier but you also end up writing cleaner and more flexible code.
-Thok

Help required with ADFS 3.0 client certificate authentication

Hi,
I am currently working on integrating ADFS 3.o for Single Sign On to some 3rd party services along with PKI solution. The basic requirement is that I should be able to choose client authentication certificate as an authentication method in ADFS and then
federate user credentials to 3rd party trust for single-sign-on.
I had done this successfully with ADFS 2.0 and that setup is working fine. I have the setup as ADFS 3.0 client authentication method enabled. When I open browser to logon, the ADFS 3.0 page displays a message as "Select a certificate that you want to
use for authentication. If you cancel the operation, please close your browser and try again." but the certificates are not displayed for selection.
The certificates are valid and have valid chaining to CA. Could someone help me resolve this issue?
Thanks!
-Chinmaya Karve

Hi Yan,
Thanks for your response. I have gone through the posts that you have suggested, and my setup looks pretty much as expected.
So, as I mentioned earlier, I have 2 parallel setups with 3rd party service(SalesForce). Once of them is running ADFS 2.0 and another one has ADFS 3.0. I can logon to the third-party services, from both the setups using username/format. I can logon to SF
using client authentication certificate from ADFS 2.0 setup, but from the same client machine, when I try to logon SF via ADFS 3.0, the browser just does not pick up any certificate. The page just shows message of "Select a certificate that you want to use
for authentication. If you cancel the operation, please close your browser and try again.".
I have checked the browser, and it has the right certificates. Also, the same browser/machine is used to logon to SF through ADFS 2.0 via client certificate, which works just fine !
I am really confused now, as to whose issue this really is...
Just to confirm, I am using Certificate Authentication from ADFS 3.0 Authentication Methods for both Intranet and Extranet.
Any suggestion or inputs where I could have gone wrong in the setup?
Thanks!

Help Required With Moving Containers Please

Hello,
I'm in urgent need of a solution in the following JAVA program:
import java.awt.*;
import java.util.Random;
* Initial template
public class SwanLake extends ThreeButtons {
    private ThreeButtonFrame win;
    private Rectangle background;
    private Container swan;
    public SwanLake() {
        win = new ThreeButtonFrame("Swan Lake");
        background = new Rectangle(50,50,500,350);
        background.setBackground(Color.black);
        win.add(background,0);
        scene();
        drawstars();
        Container moon = makemoon();
        background.add(moon,0);
        Container swan = makeswan();
        background.add(swan,0);
        win.repaint();
    private void scene() {
        Oval lake = new Oval (-80,200,400,200);
        lake.setBackground(Color.blue);
        background.add(lake,0);
    private void drawstars() {
        Random r = new Random();
        Oval star1 = new Oval(r.nextInt(500),r.nextInt(150),5,5);
        star1.setBackground(Color.lightGray);
        background.add(star1,0);
        Oval star2 = new Oval(r.nextInt(500),r.nextInt(150),10,5);
        Oval star3 = new Oval(r.nextInt(500),r.nextInt(150),5,4);
        Oval star4 = new Oval(r.nextInt(500),r.nextInt(150),12,5);
        Oval star5 = new Oval(r.nextInt(500),r.nextInt(150),5,7);
        Oval star6 = new Oval(r.nextInt(500),r.nextInt(150),8,15);
        star2.setBackground(Color.lightGray);
        star3.setBackground(Color.lightGray);
        star4.setBackground(Color.lightGray);
        star5.setBackground(Color.lightGray);
        star6.setBackground(Color.lightGray);
        background.add(star2,0);
        background.add(star3,0);
        background.add(star4,0);
        background.add(star5,0);
        background.add(star6,0);
    private Container makemoon() {
        Container moon = new Container();
        moon.setBounds(350,50,40,40);
        Oval shape = new Oval(0,0, 40,40);
        shape.setBackground(Color.lightGray);
        moon.add(shape,0);
        return moon;
        private Container makeswan() {
        Container swan = new Container();
        swan.setBounds(100,250,100,50);
        Oval shape1 = new Oval(20,20, 40,20);
        shape1.setBackground(Color.white);
        swan.add(shape1,0);
        return swan;
    public void leftAction() {
    public void midAction() {
    public void rightAction() {
}What's required in the left, mid, & right Actions at the very end is:
To add instructions to the rightAction() method to make the swan move 10 pixels to the
right each time the RIGHT button is pressed. Similarly, add instructions to the
leftAction() method to make the swan move 10 pixels to the left when the LEFT
button is pressed. Finally, when the MID button is pressed, make the moon move two
pixels to the right and one pixel downwards.
Tho get the a fuller idea the complete program can be downloaded here:
http://rapidshare.com/files/162316479/Swan.rar
If anyone can help, I'd greatly appreciate it.
Thanks,

so what have you tried?
edit: nvrmind, I'm going to bed. Hint: you're trying to move a Container. So find it's API, look up the methods regarding this critter, and see if you can find any that tell you its current location and how to set a new location. Good luck.
Edited by: Encephalopathic on Nov 9, 2008 8:23 PM

Help required with DAQ and waveform generation

Hi,
I'm using DAQ 6024E card for waveform acquisition using LabVIEW 8.2 version. I've also attached my vi for your reference.
My next step is , I want to add another waveform to the acquired waveform, i.e. I mean to say if the acquired waveform is a sine wave with 60 Hz frequency and amplitude of 8V peak-to-peak, I want to finally display a wave which is 8V peak-to-peak with sinusoidally changing freuency.
To be more clear...I want a sine wave with frequency = 60 Hz + 1*sin( 2*pie**t).
As cane bveen seen in my vi, I can extract the phase and magnitude of the original acquired signal.
Can anyone help me out with this...as I'm not able to figureout how should I proceed next.
Looking forward to hear soon,
Regards,
Rohit
Attachments:
test_analog.vi ‏162 KB

You'd probably want to use the DAQmx VI's instead of the Express VIs, when doing something more exotic. You can start by converting the existing Express VIs to code by opening their front panels and saving them as a VI.
Regards,
André
Using whatever version of LV the customer requires. (LV5.1-LV2012) (www.carya.nl)

Some help required with logic for a dynamic sql query

i have below code but not sure how to resolve this problem - what i need is to be able to dynamically
the problem:
i have a rabbge of paratmeters coming in from a form and need to be able to create a dynamic query string to go into a prepared statement object.
the problem i have is there are 2 fields year range and year.
if year range is none i need to create the query string as such :
where the value of year can be serached on exactly
str.append("VOLUME_YEAR = ? ");the probelm is if the year range is 5 or year range is 10 i dont know how to maipulate the query string to be able to set the string such that i can then place the year value in the place holder in preparedStatement.setInt(1, year)
how can i create the intial query string ie.- what are the possible things that i can do. - i'm thinking of things like putting some type of between or such type query statement - but not at all sure how the syntax would go - ie. how would i use the year value and how would i create this dynamic part of the query string so that the JDBC regonises it?
thanks for any help.
public String setVolumeYearQuerySt(String year, String yearRange, StringBuffer str){
          String volumeYearQueryString = null;
          Sring doAction= null;
          if (yearRange.equals("None")){str.append("VOLUME_YEAR = ? ");}
          else if(yearRange.equals("5 Years")){doAction = "Nothing";}
          else if (yearRange.equals("10 Years")){doAction = "Nothing";}
          return volumeYearQueryString;
          }

Saish - thanks a lot for the code example.
Although, i think its far too advanced for me to understand and try to manipulate it and fit my problem. I'm pretty new to programming as you can probably see from my simple if else type statements. But i'm going to give it a try and see how it goes.
could you please be kind enough to demonstrate how i could use the above syntax to do the following. --
i have a year being entered in form . in the database there is a column year volume which contains year in single year value format and also in a year range value format - thus as in below - how could i do this -
eg.
user can enter a value in the year field a single value or a range value - then he can select +/-5 or 10 yrs range on that value - the DB holds the values as single values and ranges as below -
one suggested apporach is as follows if a single user is alloweed to enter only a single value in the filed and select a query range +/- 5 etc..
volume year of �1926-1928� and the user enters �1927�, the query has to find all records where
look for records that are �less than or equal to� 1927. It then has to check to see if it contains a range. For those that it finds containing a range, it has to work out what the �upper� year is and check to see if that is �greater than or equal� to 1927. If it is, then that is a possible matchanother approach that is suggested is to have a drop down with all years from databse and user is only llowed to select value from drop down and following logic is suggested :
Because volumes can be received as ranges (e.g. 1964-1966), some extra coding is required where the user asks for a Year Range (such as + or � 5).
Using the Year selected from the dropdown list, split it into 2 values, a low year and a high year. For example, if �1965-1968� is selected from the year dropdown, split it into �1965� and �1968� for the low year and high year respectively. If �1964� is selected from the year dropdown, split it into �1964� and �1964�. Now take the Year Range that the user has entered into account. For example, if the user has entered 5, subtract 5 from the low year and add 5 to the high year. Using these values, include the following search criteria in the query to the database:-
(<low year>     BETWEEN
             left (VOLUME_YEAR, charindex ('-',VOLUME_YEAR + '-') - 1)
     AND     right (VOLUME_YEAR, charindex ('-',VOLUME_YEAR + '-') - 1))
OR     (<high year>     BETWEEN
             left (VOLUME_YEAR, charindex ('-',VOLUME_YEAR + '-') - 1)
     AND     right (VOLUME_YEAR, charindex ('-',VOLUME_YEAR + '-') - 1))regards - i think if i could solve the first approach that would be something good as its most user freindly
thanks

Help required with SMS in Java

Similar Messages

Maybe you are looking for