Help required with upgrading to OS5 on curve 8520

Hello everyone,
I'm using an unlocked version of the bb curve 8520 and want to upgrade my bb device os to v5.0. (current version- 4.6.1)
I tried using the application loader on the bb website (NA & India both) but it just tells me that my OS is updated and that i will be notified if there are any updates available. I would be really grateful if someone could help me update my os.
Solved!
Go to Solution.

Hello,
Your warranty is not endangered. You are free to use any carriers OS package on your BB. Your carrier may, however, refuse to provide you with support (including Warranty evaluation/service) until you fall back to their supported device OS level. But your warranty per se is not endangered.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

Help required with (soundcard) connection / settings, thanks in advan

Help required with connection / settings between a Creative Sound Blaster Audigy Platinum EX (soundcard) and a Creative DTT3500 Digital (5. speakers).
The problem
No sound from any of the speakers. (Exception can plug in headphones at front)
Background
My computer has been recently upgraded at my local computer shop and all programs re-installed (including driver update from Creative's website). However after reconnecting speakers and restoring the original settings I?m getting no sound from any of the speakers. I?ve followed all the available advice/instructions I can find on this website and manuals to no avail.
Set-up
Physical
(Digital DIN) Speakers/decoder amplifier (DTT3500) connected to the (digital out) soundcard (Audigy Platinum EX) using minijack to DIN cable. (As per instruction manual)
Software
Creative Audio Consul ? setting as per instructions, however have tried variations in vain. (Note: above tabs there is a select device box with SB Audigy [A0000] in it ? only option. Just wondering what [A0000] means?)
Your advice please. A simple step by step guide would be appreciated, many thanks in advance, Jon

"My computer has been recently upgraded at my local computer shop and all programs re-installed (including driver update from Creative's website). "
Do you have the original installation disk?
If so, try installing THOSE drivers, ESPECIALLY if it worked before. Be sure to uninstall what is there now, first.
Its natural for most people to want the 'latest' drivers for their hardware. However:
After experiencing some difficulties with some CL 'updates' for certain products, I now avoid them UNLESS I am having a PROBLEM with the existing drivers.

Help required with Photoshop Elements 4.0 this has been installed on my new Toshiba laptop with windows 8.1 for some 18 months and operating well. Now it will not open, message pops up saying "attempt to access invalid address" then "application not respo

Help required with Photoshop Elements 4.0 this has been installed on my new Toshiba laptop with windows 8.1 for some 18 months and operating well. Now it will not open, message pops up saying “attempt to access invalid address” then “application not responding” Suggestions how to access would be much appreciated. Tks. Stuart

What is the size of your hard disk? PSE 4 is a very old program and I suspect it is not able to access the entire hard disk on your machine. Just a thought here.

Help require with installing Adobe Acrobat onto my Macbook Pro Retina.

Help require with installing Adobe Acrobat onto my Macbook Pro Retina.
I have successfully installed all of my creative cloud apps with the exception being acrobat.
I cannot print from Indesign to PDF.
I have unistalled, reinstalled and still no Adobe Acrobat.
I now have to go back to Windows 8 and create the PDF's there.
Any one know how to get around this issue?
Thanks in advance
Kelvin

OSX has effectively killed the ability to print to pdf, (print to pdf eliminates most of the "Rich features" of current pdf).
Export from InDesign, always, excpet for the 1% of the time where you know why print to pdf would produce a better result.

Can anyone help me with upgrading memory in my older iMac? I currently on have 1gb of memory so as you can imagine my machine is quite slow.

Can anyone help me with upgrading memory in my older iMac? I currently only have 1gb of memory so as you can imagine my machine is quite slow. I check in my system profiler and it shows I do have a memory slot open. It is using a DDR2 and I was told that the latest are DDR3 and I need to find out if I can run that on my model number. This info came from a tech guy at best buy.

That is what I needed. You can upgrade to a maximum of 6gb of ram and need the following type:
200-pin PC2-6400 (800MHz) DDR2 SO-DIMM. You can easily find it online, here is an example: http://eshop.macsales.com/shop/memory/iMac/Intel_Core_2_Duo_PC2-6400

Plz help me with Upgradation Tools

hi Gurus,
Can u help me with any upgradation tools..
Regards
Sahil

Hi Sahil,
Upgrade Projects can follow one of the 2 possibility.
1. Technical Upgrade: in which the basis consultant will handle the same & transport the configurations & developments from 5.0 to 6.0. Subsequent to which functional consultant & ABAP er will do the necessary change in configuration or further configuration & ABAP ers will do necessary developments required.
2. Traditional ASAP mythology: which would refer as new implementation as a whole.
STEPS IN TECHNICAL UPGRADE
Basis Team will do the prepare activities. (UNIX, BASIS, DBA).
The client has modified Developer need to run the Transaction SPDD, which provides the details of SAP Standard Dictionary, objects that. Users need to take a decision to keep the changes or revert back to the SAP Standard Structure. More often decision is to keep the change. This is mandatory activity in upgrade and avoids data loses in new system.
After completing SPDD transaction, we need to run SPAU Transaction to get the list of Standard SAP programs that have been modified. This activity can be done in phases even after the upgrade. Generally this will be done in same go so that your testing results are consistent and have more confident in upgrade.
Run SPUMG Transaction for Unicode Conversion in non-Unicode system. SPUM4 in 4.6c.
Then we need to move Z/Y Objects. Need to do Extended programming check, SQL trace, Unit testing, Integration testing, Final testing, Regression Testing, Acceptance Testing etc.,
The main Category of Objects that needs to be Upgraded is
Includes
Function Groups / Function Modules
Programs / Reports
OSS Notes
SAP Repository Objects
SAP Data Dictionary Objects
Domains, Data Elements
Tables, Structures and Views
Module Pools, Sub Routine pools
BDC Programs
Print Programs
SAP Scripts, Screens
User Exits
You can find the difference in release notes of each SAP version.
Here are the links.
http://help.sap.com/saphelp_47x200/helpdata/en/fc/e3003deddfae4de10000000a114084/frameset.htm
http://help.sap.com/saphelp_scm50/helpdata/en/28/b34c40cc538437e10000000a155106/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/43/68805bb88f297ee10000000a422035/frameset.htm
Reward if helpful.
Regards,
Harini.S

Help with Internet Settings for Blackberry Curve 8520 On Orange Pay-Monthly

I need help with my internet settings I'm currently on Orange Pay-Monthly and have recently bought a second hand Blackberry Curve 8520 which is unlocked but used to be on 02! I don't have a clue on what to do or where to start all I know is in the top right hand corner where the signal bar is it says GPRS and WIFI ! I don't want WIFI as I don't have a wireless connection and would like to get the settings for my curve so I can browse the internet and go on Facebook etc and BBM!! I've clicked on the internet logo in the menu bar but it just say's hotspot browser.. but wont let me browse!! Some one please help me !!

Hey BaByPaW1990,
Welcome to the BlackBerry Support Community Forums.
Thanks for the question.
You can get your APN settings from your network service provider, also make sure you have a BlackBerry data plan.
Let me know if you have any more questions.
Cheers.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

Immediate help required with this job scheduling scenario

I have a job that needs to run a procedure hourly but not between 6:00 AM to 8:00 AM and 6:00 PM to 8:00 PM.
Can anyone help me with how to schedule this job.

If you use a window the job would only execute if the window opens. If for some reason the window did not open then the job would not execute.
Windows should be used to specify which resource plan should be active for the time interval.
In this case you are better off using FREQ=DAILY; BYHOUR=; and specify the hours.

Help required with Select statment..... ASAP pls

HI All,
Let me desc my table first .
01                             NOT NULL VARCHAR2(5)
02                             NOT NULL VARCHAR2(5)
03                             NOT NULL VARCHAR2(5)
04                             NOT NULL VARCHAR2(5)
31                                                    This is how table has been created(Note:not by me)
select name from od_shift where year=2011 and month='Feb' and "02"='W"{code}-->no doubt this is working fine
My problem is ...here rather putting the number directly ("01","02","03"....."31")
I need to take it from the first two digits of date('01-feb-2011')
like {code}
select name from od_shift where year=2011 and month='Feb' and to_char(to_date('01-feb-2011','dd-mon-yyyy'),'dd')='W" but this is not working
kindly help me with this .
Edited by: Basva on Mar 8, 2011 4:53 AM

Pleiadian wrote:
You could do a case statement. It's not elegant, but it works
Edit: smon's solution is better if pl/sql is an optionI disagree, it's quite elegant given the cirumstances of that sick table. And it definitely beats a dynamic SQL solution.
@Basva - when will you realize that your table is no good, and needs to be normalized into a more traditional relational table?
Regards
Peter

Help required with an image

Hi all,
I wonder if someone can help me with the following issue.
If you see the attached image in the top left hand corner their is a square box which is a different shade to the rest of the header.
I need to rectify this and blend it in with the rest on the header colour; however, I do not know how to do this and would appreciate some assistance in doing this.
I'm a noobie to photoshop so any help is much appreciated.

It seems you've copied another portion of the texture to overlay something you didn't want seen...
As opposed to copy/paste of a rectangular region, this is almost a textbook use for Content Aware Fill, which should (assuming it works properly) match the pattern and blend the colors.
Try selecting just the blemish or whatever you're trying to cover, then expand the selection a few pixels, then Edit - Fill - Content Aware.
-Noel

Help required with User exit logic

Hi gurus,
Please help me with the logic I wrote for the user exit for a PP Work Center View extract structure. Here is the details of the add on fields: VGW01, VGW02, VGW03, STEUS(from table PLPO); DataSource: 2LIS_04_P_ARBPL,
data: l_s_pp1 like MC04P_0ARB(extract structure of 2LIS_04_P_ARBPL),
l_tabix like sy-tabix,
lv_VGW01 like PLPO-VGW01.
lv_VGW02 like PLPO-VGW02.
lv_VGW03 like PLPO-VGW03.
lv_STEUS like PLPO-STEUS.
tables : PLPO.
case i_datasource.
when '2LIS_04_P_ARBPL'.
loop at c_t_data into l_s_pp1.
select single vgw01into lv_vgw01
from PLPO
where field = l_s_pp1-field.
if sy-subrc = 0.
l_s_pp-zzvgw01 = lv_vgw01.
l_s_pp-zzvgw02 = lv_vgw02.
l_s_pp-zzvgw03 = lv_vgw03.
l_s_pp-zzsteus = lv_steus.
endif.
modify c_t_data from l_s_pp1 index l_tabix.
endloop.
Any additional comments welcome. Thanks in advance.

Hi,
Try coding as per the below code
case i_datasource.
When '2LIS_04_P_ARBPL'.
DATA: lt_data TYPE TABLE OF MC04P_0ARB.
FIELD-SYMBOLS: <ls_data> TYPE MC04P_0ARB.
Internal table for
TYPES:
        BEGIN OF ty_tbl1,
                 lv_VGW01 TYPE PLPO-VGW01,
                 lv_VGW02 TYPE PLPO-VGW02,
                 lv_VGW03 TYPE PLPO-VGW03,
                 l_bmsch TYPE XXXX-XXXX,
                 l_plnnr TYPE XXXX-XXXX
                 l_datuv TYPE XXXX-XXXX
                 l_aennr TYPE XXXX-XXXX
                 l_plnkn TYPE XXXX-XXXX
                 l_plnal TYPE XXXX-XXXX
        END OF ty_tbl1.
DATA:
         lt_tb1 type standard table of ty_tbq,
         ls_tb1 type ty_tb1.
lt_data[] = c_t_data[].
Read data into internal memory using jOins
select aVGW01 aVGW02 aVGW02 aVGW02 bbmsch bplnnr bdatuv baennr bplnkn bplnal into into CORRESPONDING FIELDS OF TABLE
lt_tb1 from PLPO as a innerjoin XXXX as b where aXXXX=bXXXX.
use the internal table to get the data to the enhaced fileds
LOOP AT lt_data ASSIGNING <ls_data>.
    read table lt_tb1 into ls_tb1
         with key XXXXX = <ls_data>-XXXX .
    if sy-subrc eq 0.
      <ls_data>-lV_VGW01 = ls_tb1-lv_VGW01,
      <ls_data>-lV_VGW02 = ls_tb1-lv_VGW02,
      <ls_data>-lV_VGW03 = ls_tb1-lv_VGW03,
      <ls_data>-bmsch    = ls_tb1-bmsch,
      <ls_data>-plnnr    = ls_tb1-plnnr,
      <ls_data>-datuv    = ls_tb1-datuv,
      <ls_data>-aennr    = ls_tb1-aennr,
      <ls_data>-plnkn    = ls_tb1-plnkn,
      <ls_data>-pln1l    = ls_tb1-plnal.
      MODIFY lt_data FROM <ls_data>.
    endif.
ENDLOOP.
REFRESH c_t_data.
c_t_data[] = lt_data[].
Note that the code is not written with the exact fields. Change the fields where necessary(also i have joined only 2 tables if needs to be joind form more than 2 table change the join statement accordingly).
Thanks,
Nagarjuna
Edited by: Nagarjuna Reddy on Oct 20, 2011 3:39 AM

Is possible to upgrade my OS 5 curve 8520 to OS 6?

Hi
I have a BB Curve 8520 with OS 5 and want to upgrade to 6, is this possible?
Thank you

amonroy wrote:
Hi
I have a BB Curve 8520 with OS 5 and want to upgrade to 6, is this possible?
Hi amonroy
Welcome to BlackBerry Support Forums
Sorry you cannot Update your BlackBerry® Curve 8520 to OS 6, It can't handle OS 6 because it lacks memory and the required Harware to run OS6 .
OS5 runs very well on BlackBerry®Curve 8520 ,So no need to think about any further Update
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

I FIXED MY PROB WITH GIFFGAFF SIM ..blackberry curve 8520 sim not provised 2 ....sos

hello for 2 week now iv been trying fix this prob its on orange but unlocked ...iv tryed all sorts of stuff from service books to os updates and still no joy how do i fix this prob...the phone is in uk..running on v4.6.1.314 ....& it wont update to the latest 5
realy i think i need a complete back up .....witch i dont have
im lost im ready bounce it of the wall .... is there a place i can get the full factory os with the orange system ?

Hey bbgod,
Welcome to the BlackBerry Support Community Forums.
Thanks for the question.
If this BlackBerry® Curve™ 8520 smartphoneis from a different provider, you can only update to the latest version from that provider.
You can check for updates by going to www.blackberry.com/update
Let me know if you have any more questions.
Cheers.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

HELP regarding abnormal high maintenance of Blackberry Curve 8520 for WHITE SCREEN

I have a BLACKBERRY CURVE 8520 since past 2 years.
For past few days, the screen of the set become WHITE.
i searched the net and i found the it is common problem of BLACKBERRY.
i tried few tricks as told by various forums.
but the WSOD( white screen of death) didn't go.
my handset can still receive the calls, but i cant see CALLER NAME'.
i also got messages which i am not able to see.
OVERALL MY BLACKBERRY BECOME OLD CLASSIC TELEPHONE INSTRUMENT NOW.
I went to authorised service centre of Blackberry at Meerut in India.
He told that the LCD screen is to changed and the cost will be around Rs. 6600 only !!!!!
I returned with BIGGGG SHOCK !!!
{{ BLACKBERRY LCD DISPLAY PART- COST Rs 6600/- or APPROX $ 120 . IT IS TOO HIGH NOT REASONABLE AND JUSTIFIED}}
I then tried to find latest price of curve 8520.
On flipkart and naptol -- it is Rs 8999/- {{ LATEST PRICE of curve 8520. IN INDIA APPROX $ 163}}
On ebay.in/   Rs 8850/-
TOO COSTLY SERVICE AND MAINTENANCE OF BLACKBERRY>.....
It is very difficult to lodge a complaint for BLACKBERRY. Customer support is very poor.
Can anyone guide me as I am not able to use my Blackberry for past several weeks?

hp_1706 wrote:
Ii searched the net and i found the it is common problem of BLACKBERRY.
i tried few tricks as told by various forums.
but the WSOD( white screen of death) didn't go.
What is it that you have done already, before any of us can give you any further suggestions?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Help required with WLC software upgrade

I have a customer with WLC 4402 in use, running software version 7.0.98.0, and supporting 11 APs at present. The customer wants to enlarge the WLAN, which involves increasing the number of APs. I have purchased a new WLC5508, and have installed it onto the network alongside the 4402. the 5508 is running software version 7.0.116.0. Because the wireless network is critical to the user, we want to move the APs over to the new controller while the network is up and running, then remove the 4402.
However, when we set the 5508 as the master controller, or tell one of the APs to use the 5508 as its primary controller, the AP connects to the new controller, downloads the new software version, attempts to load it but reports an error with the unzipped file size of the software and fails to boot. formatting the flash on the AP, then disconnecting the 5508 from the network and rebooting the AP allows it to connect to the 4402, it downloads the older software and boots as normal. A new AP, if connected to the 5508 in a test scenario (ie no 4402) connects, downloads and boots perfectly.
I have the upgrade software to allow the 4402 to be upgraded to 7.0.116.0, but I am concerned that, if this is installed, the existing APs will then fail to boot from the 4402 or the 5508.
all APs are 3502s, running IOS version 12.04(23c)JA when connected to the 4402 and 12.04(23c)JA2 on the 5508.
Any suggestions would be gratefully received
Thanks

Hi Pat,
thanks for the reply. I am off site until the morning, but will attach the colsole output tomorrow.
Your mentioning a corrupt image makes me wonder - we had a lot of trouble setting up the initial config on the new WLC, getting a lot of launch failures. Eventually things seemed to settle down (it certainly booted successfully first time this morning) and getting an AP to connect without a problem made me hope it was just a quirk of the configuration wizard, but I think I will try a reboot of the WLC before I do anything else, just to check it is stable.
If it is a corrupt image it may take a little while to sort, as we have not as yet got a support contract on the 5508 - the plan was to upgrade the existing contract on the 4402 once they were swapped out, but I'll let you know whats going on
Rob

Help required with upgrading to OS5 on curve 8520

Similar Messages

Maybe you are looking for