Help requires_A Safety Belt for Logistics Extraction Queues

Hi All,
I have read the Blog "A Safety Belt for Logistics Extraction Queues" and it is very useful for taking the backup data from Extraction Queue.
I have a set of Queues related to this BLOG.
1. Suppose, i have created the Backup table for the Particular Application (Ex 03).And i am scheduling the Job from the JOb Control of LBWE.Will it pull the data from Backup table or with the Standard Table. How can i pull data based on our needs.
Pls suggest on this.
Thanks,
Jelina.

Dear All,
Anybody has tried performing the Backup of LBWQ data in ECC. How to pull data from backup table to RSA7.
Pls suggest.
Thanks,
Jelina.

Similar Messages

Safety limits for generic extraction

hi,
i would like to know data how data reacts for different type of scenarios, if my update method is calendar day.
1) when my upper limit is 1 and lower limit is 2.
2) when my upper limit is 1 and lower limit is 1.
3) when my upper limit is 2 and lower limit is 1.
please reply to this as i am in the process of creating the data source.
thanks
suresh

Hi,
Here I assume Delta enabled filed is on Creation date.
on 18.12.2009:(assume that last delta was happend on 17.12.2009 i.e which has brough the delta records created upto 16.12.2009)
In case 1) all delta records created upto 17.12.2009(due to UL 1 ) .And also brings again the delta records which were created on 15.12.2009 and 16.12.2009 due to LL 2 (even though those were uploaded by the delta loads on 16.12.2009 and 17.12.2009 respectively)
In case 2) all delta records created upto 17.12.2009(due to UL 1 ) .And also brings again the delta records which were created on 16.12.2009 due to LL 1 (even though those were uploaded by the delta loads on 17.12.2009 )
In case 3) all delta records created upto 16.12.2009(due to UL 2 ) .And also brings again the delta records which were created on 15.12.2009 due to LL 1 (even though those were uploaded by the delta loads on 17.12.2009 )
on 19.12.2009(assume that last delta was happend on 18.12.2009 i.e which has brough the delta records created upto 17.12.2009)
In case 1) all delta records created upto 18.12.2009(due to UL 1 ) .And also brings again the delta records which were created on 16.12.2009 and 17.12.2009 due to LL 2 (even though those were uploaded by the delta loads on 15.12.2009 and 16.12.2009 respectively)
In case 2) all delta records created upto 18.12.2009(due to UL 1 ) .And also brings again the delta records which were created on 17.12.2009 due to LL 1 (even though those were uploaded by the delta loads on 18.12.2009 )
In case 3) all delta records created upto 17.12.2009(due to UL 2 ) .And also brings again the delta records which were created on 16.12.2009 due to LL 1 (even though those were uploaded by the delta loads on 18.12.2009 )
Regards,
Anil Kumar Sharma .P

Result set too large in BI report; Safety belt settings in WAD

Hello All,
When we run a BI report, the error " Result set is too large; data retrieval restricted by configuration" appears. We did a search on SAP portal and found the SAP note 1127156, whics recommends the configuaration of safety belt to limit memory used.
Acoordingly the cust table RSADMIN has been configured. But on the web template side, we need to configure the changes as well. The note says:
"1. Use the context menu Properties / Data Provider in a BEx Web Application to maintain the "safety belt" for a Query View.
2. Choose the register "Size Restriction for Result Sets".
3. Choose an entry from the dropdown box to specify the maximum number of cells for the result set.
The following values are available:
Maximum Number
Default Number
Custom-Defined Number
Behind "Maximum Number" and "Default Number" you can find the current numbers defined in the customizing table RSADMIN (see below).
4. Save the Query View and use it in another Web Template."
I am trying to locate these options in the context menu in Web Applications designer but in vain.
Can anyone help...

This option is not available in WAD, it will be available when you run the web template under settings, Data Provider for the standard template 0ANALYSIS_PATTERN.
If you have a custom template you will have to use the Dataprovider settings web item in your custom template to change the values during runtime.

Two listener for the same queue - different extraction rule

Hi all.
I've the following situation that I'm trying to troubleshoot.
OSB communicates with another system using JMS Queues.
One queue for teh request, one for the response.
Depending on the kind of service, the request is published on the request using a dynamical routing to a Business Service. Depending on the cases, this business service could be:
1. Just insertion on the queue (no response required)
2. "Queue Manager" - Insertion and wait for response (response required, JMS Correlation ID as correlation pattern)
About the extraction from the response queue, when the messages are published from the "Queue Manager", then they must be extracted from the same resource based on the Correlation ID.
Otherwise, all the messages published in other way (not the "Queue Manager" but the option #1), a different resource should extract them from the response queue (a proxy service with protocol JMS).
What happens at runtime is that the messages published from the "Queue Manager" are extracted from the other resource.
How can I solve this?
Do I need to use two separate queues or there is a way to configure two different listener on the queue, one based on the JMS Correlation ID and the other one that extracts all the other requests?
Thanks in advance to anyone that will help.

Unfortunately, I've already evaluate the message selector option, but in the following case:
BS1 (Request Only)----->JMSQRequest ----->Your Logic ----->JMS Reponse--->JMS Proxy service with Message selector
The JMS Proxy with message selector should know the value that is the key for the extraction. In this case we have not this infornation since when we run this scenario there is an external system that extracts the request and provides the response... and in the middle we lost the informations (e.g. if we use a key ID, the Proxy with message selector doesn't knwo which value is has to search for in the ID).
For the moment I think that the best solution could be to have two separate queues, but I'm trying to figure out if there is any other option.

SAP help for Logistics Customizing Cockpit

Hi Friends
Greetings...
I want to read complete scenario for BW extraction, I want to know LIS, and LO concept, Central Delta Managemen, Set up tables, why we need MCstructures if we have LIS structures etc.,
I'm trying to search in "help.sap.com" but couldn't find i got only "customizing extractors" in BW help, but couldn't find complete scenario of LO and LIS. I have 350 extraction material, but still i want to read from help.sap.com also. kindly help me to get this site
bye
lasya

Hi,
Step by Step for LIS Extraction
LIS EXTRACTION
T.code - :MC18 create field catalog
1. Characteristic Catalog
Application-01-Sales and Distribution, 02-Purchasing, 03-Inventory Controlling, etc.
Catalog category 1. Characteristic catalog, 2. Key figures catalog 3. Date catalog
Select characteristic catalog and enter, click on characteristic select the source table and it will be display the relevant source field and select the source field, copy + close, copy.
Save, similarly create key figures catalog
T.code : MC21 create infostructure
Infostructure : S789
Application 01
Choose characteristic select the catalog, select the fields, copy + close
Choose key figures catalog select the key figures ,copy + close, save and generate
T.code MC24 create updating
Infostructure : S789
Update group : 01- Sales document, delivery, billing document ,enter
Select the key figures click on rules for key figures give suggest rules, copy save and generate
Click on updating (activate updating)
Select the infostructure set periodic split 1. Daily, 2. Week, 3. Month, 4. Posting period
Updating 1)No updating,2)Synchronous updating (V1), 3)As synchronous updating (V2), 4)As synchronous updating (V3),
T.code LBW0 - Connection of LIS Information structures to SAPBW
Information structure : S786
Select the radio button-Setup LIS environment and Execute.
Select the radio button-Generate data source and Execute.
For Delta update:
Select the radio button-Generate updating and Execute
Select the radio button -Activate / deactivate and Execute.
T.code SBIW Display IMG (implementation guide)
Setting for applications specific data source logistics Managing transfer information structure setup of statistical data applications specific setup of statistical data perform statistical setup sales.
Choose activity
Setup Orders, deliveries, billing
Choose the activities enter the infostructure (S789), give name of the run, date of termination, time of termination, No. of tolerated faulty documents. Then execute
T.code RSA3 Extractor checker
Give the data source name eg. 2LIS 01S789 and execute, result will get some records
Go to BW side replicate data source Assign infosource Create infocube Create update rules create infopackage and schedule the package with initialize delta process.
For delta update :
In R/3 side
T.code MC25, set update (V1) or (V2) or (V3)
T.code LBW0, choose generate updating and execute then choose activate / deactivate and execute
BW side - create infopackage and schedule the package with delta update.
First time if your scheduling the infopackage -in R/3 side T.code :MC25 -Udating set to No update,insted of selecting the update V1,V2,V3.
If your doing the Delta update:in R/3 side T.code :MC25-Updating set to either V1 or V2 or V3. and the to T.code :LBW0 -Select the radio button Active/deactivate and Execute.
and schedule the infopackage with delta update.
3.Modules:
SD,MM, PP,QM..
4. Deltas for LIS:
After setting up the LIS environment, 2 transparent tables and 1 extract structure is generated for this particular info structure. Within transaction SE11 you can view the tables SnnnBIW1, SnnnBIW2 and the structure SnnnBIWS and the InfoStructure itself Snnn
The tables S5nnnBIW1 & SnnnnBIW2 are used to assist the delta update process within BW.
Extract structure SnnnnBIWC is used as an interface structure between OLTP InfoStructure and BW
The OLTP system has automatically created an entry in the control table TMCBIW. Within transaction SE16 youll see, that for your particular InfoStructure the field BIW active has the value X and the field BIW status is filled with value 1 (refers to table SnnnBIW1).
The orgininal LIS update program RMCX#### will be enhanced within the form routines form Snnnbiw1_update_.... and form Snnnbiw2_update
With the transaction SE38 youll see at the end of the program [starting at line 870 / 1006], that the program is enhanced within a BIW delta update coding
Within the flag Activate/Deactivate the update process into the delta tables (SnnnBIW1/Sn5nnBIW2) is swichted on/off. In the table TMCBIW is defined, which table is active for delta update.
check LO also
LO
rgds,
raj
Message was edited by:
gangaraju mullapudi

ERROR : Entries for application 13 still exist in the extraction queue -

Hi everybody,
While modifying extractor (LO Cokpit) I am getting this error.. I have deleted data through t.code LBWQ & LBWG still I am getting this ERROR,
" Entries for application 13 still exist in the extraction queue -> "
and it is givig the Diagnosis as below
Diagnosis
You are not allowed to change the extract structure MC13VD0ITM forapplication 13. This is because unprocessed entries are still presentin an extraction queue of application 13 for at least one client.
If an extraction structure is changed for which there are still openentries in an extraction queue, these entries can no longer be read andthe collective update terminates.
Please help me out..it is urgent...
Thanks in advance

Hi Sunita,
Do one things, to fix this problem, go to the BW for that info package, it seems
its already exists..if yes..delete the initialization request from the package
and come back to R/3 try to delete the application 13 and it will allow to make
the changes to the struc.
Hope it helps..
Need further help revert..
Assign points if useful..
Cheers,
Pattan.

Urgent Entries for application 11 still exist in the extraction queue

Hi All,
In LBWE when i am trying to mainting structure its not allowing to add fields to ExtractStrucutre.
Following is the error iam getting.
Entries for application 11 still exist in the extraction queue ->
I have set the Update to inactive and trying to add fields to Extract strucutre .
Morover,
I have already deleted setuptable entries for this application Component 11 and i checked in rsa3, no records are there.
Regards,
C.V.
Message was edited by: P.C.V.

PCV,
Here are the steps. Make sure you do them when there is no posting going on.
1) Using transaction SA38, execute program RMBWV311. This will send the data from the extraction queue to delta queue for application 11.
2) Run your 2lis_11_***** info packages to bring the delta records into BW. Make sure to run these info packages twice because the delta is cleared on R/3 only if you run them twice. It is designed this way to accomodate the delta repetition functionality.
Just to make sure, verify that you don't see any data in RSA7, LBWQ and if you use RSA3, the system should not extract any data.
You should be able to change the extract structure now.
Abdul

Need help for writing extract program

hi
i need help for writing extract program to retriew data from legacy system.
i already developed bdc programs for me31k and me21.
my requirement is to write extract program s for those t.codes.
to retriew data from legacy system and stored in flat file.

i need help with a java program. it is a program that allows the user to enter a student's GPA, number of extracurricular activities, and number of service activities. The user can not enter a gpa above 4.0 or below 0. The user can not enter a negative number for the number of both activities. If the student meets the following criteria: 1) GPA of 3.8 or above and at least one extracurricular activity and one service activity, 2) GPA below 3.8 but at least 3.4 and a total of at least three extracurricular and service activities, 3) GPA below 3.4 but at least 3.0 and at least two extracurricular activities and three service activities, the message "Scholarship candidate" should display. If the student does not meet the criteria above, then the message"not a candidate" should display. Can you help me, please?
You haven't posted ANY 'java program' for us to help with.
The forum is NOT a coding service. It is to help you with YOUR code.
Post the code you have written and SHOW us (don't just tell us) how you compile it and execute it and the results you get. Then we can help you with any problems you are are having.
If you need help understanding just what the program should be doing you need to ask your instructor to clarify the assignment.

Data loading for Logistics Data Extraction 2LIS_06_INV through setup tables

Hi Guyz,
I have LO Datasource 2LIS_06_INV which I am using for extracting Invoice Verification Data.
I had intialized and loaded invoice data in BI system and was using chais to load daily.
Now I want to load data again from scratch from source system.
As of now I know we need to delete and fill up setup tables in source system keeping the users locked so that no new records are created that particular moment.
But what about the delta queue and extraction queues.
Do I need to do something over there because as I understand there will be records in both of them so before filling the setup tables I need to delete both the queues and then fill the setup tables so that duplicate records should be avoided.
Please let me know what exactly should I do in detail.
Appreciated in advance.
Regards,
raps.

hi,
this entirely depends upon the DS, if the DS delta type supports overwrite mode then you need not lock the users, you can start the setup job without deleting the delta queues as well coz even if the record is extracted twice the values won't mess up as the flow will be in overwrite mode. If delta type of DS is Additive in table ROOSOURCE then you need to lock down the users or run the job over a weekend when no users are logged in.
regard,
Arvind,

2LIS_04_P_ARBPL Delta not captured from extraction queue

I am using datasource 2LIS_04_P_ARBPL to load 0PP_C03 cube. I have setup init selections as follows
0PRODORDER     AUFNR     Order Number     6000000000     6999999999
0COORD_TYPE     AUART     Order Type     ZCP1
0PLANT     WERKS     Plant     1010
In short I have the selections for entire range of production orders for a given plant and order type.
I have populated setup tables, did init load with data transfer, activated the update in LBWE, scheduled V3 job, no issues here.
When we create new production orders they are available in extraction queue MCEX04, when V3 job runs it makes it to delta queue, available in RSA7, loads into BW when delta load is done.
Ths issue is when we TECO a production order (status marked complete) to same production order which we just loaded as delta, it does makes it to extraction queue MCEX04, but when V3 job runs it is not available in delta queue, RSA7. May I please know if this is standard behavior of this extractor or I am missing something? Why the same production order is now getting filtered by V3 job?
Any help will be appreciated.

Hello
I am also facing same issue.
but in my case, I not mapped 0recordedmode with rocancel in transformation.
My scenario : DS(2LIS_04_P_ARBPL) ---->DSO(Stranded DSO) ---> Info Cube. DSO and Cube is Z object.
In cube I am having 2 records: 1 is Correct and 2nd is bad(Minus or 0 values) record.
That bad records fetch in report with Minus or 0 values not correct one.
Please let me know if have any concern on this.
Thanks is advance.

Help How to Delta for ZBBPBW_DOCREL_SELECT - SAP Note 501836 / 931998

Dear Guru's,
We have applied the SAP Notes 501836 and 931998 in order to create the extractor mentioned above. In SAP note 501836 it mentions:
<b><i>Note forSRM 4.0:</i>
In SRM 4.0, the generic extraction also supports the delta update procedure. For you, this means that you can also use the delta update procedure for the extraction of the document flow.</b>
Has anyone adopted or managed to make this extractor delta capable, if so could you please share how to achieve this.
Thanks and Kind Regards,
Alex

Hi Rana,
There is no need for you to set any thing for delta.
As normal run the IP with init with data transfer and then next enable delta for the next load.
Check for the Below matter which explains how the delta is carried in the case of FI data sources.
Financial Accounting line items are read by extractors directly from the tables in SAP R/3. A time stamp on the line items serves to identify the status of the delta data. Time stamp intervals that have already been read are stored in a time stamp table. The delta dataset is transferred to BW directly, without records being transferred to the delta queue in SAP R/3 (extractor delta method).
The Financial Accounting line items are extracted from SAP R/3 in their most recent status (after-image delta method). This delta procedure is not suitable for filling InfoCubes in BW directly. Therefore, firstly, the line items must be loaded in the BW system in an ODS object that identifies the changes made to individual characteristics and key figures within a delta data record. Other data destinations (InfoCubes, ODS objects) can be provided with data from this ODS object.
For more details check the below link
[Financial Accounting: Procedure for Line Item Extraction|http://help.sap.com/saphelp_nw70/helpdata/en/af/16533bbb15b762e10000000a114084/frameset.htm]
Regards
KP

What is differences extraction queue, delta queue and uddate queue ?

hi guru's
What is differences between extraction queue, delta queue and uddate queue ? can u describe briefly?
Thanks & Regards
nandi

Dear Prabha,
Basically when any document is posted in R/3, it is updated to the update table, from there it is taken to our delta queue for send it to BW side.
When extraction starts, data is sent to BW from delta queue. then again this cycle starts.
When you post any document in OLTP system (eg SAP R3),
say create sales order by VA01, then posting is made to application tables (VBAK/VBAP) through V1 and also to sm other tables through V2, Communication structure written to update queue/extraction queue/delta queue(directly) as per the update mode selected. V3 is always followed by V2 and we are supposed to schedule it.
From this delta queue, data is extracted by BW infopackages.
There are various update methods according to which extraction or delta queue are used, so when document posting takes place it also write data into extraction queue (through V1 update) and if we use queued delta method then this data is collected in collection run and written to delta queue and from this delta queue we request for data from BW.
There are lots of posts on SDN for this, please have a look on those.
one for your reference...
https://www.sdn.sap.com/irj/sdn/profile?userid=3507509
Hope it helps...
Message was edited by:
Ashish Tewari

Carriage Belt for HP OfficeJet Pro L7590

How replace Carriage Belt for HP OfficeJet Pro L7590

Hello dinci,
Welcome to the HP Forums.
I see that you are looking for instructions on how to replace a carriage belt.
This is a none replaceable part. If you are having a hardware issue with the printer, I suggest calling HP's Technical Support to see about options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thanks for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Steps for Data extraction from SAP r/3

Dear all,
I am New to SAP Bw.
I have done data extraction from Excel into SAP BW system.
that is like
Create info objects > info area> Catalog
--> Character catalog
--> Key catalog
Create info source
Upload data.
create info cube
I need similar steps for data extraction for SAP R/3
1. when data is in Ztables ( using Views/Infosets/Function etc)
2. When data is with Standard SAP using Business Content.
Thanks and Regards,
Gaurav Sood

hi,
chk the links
Generic Extraction
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
CO-PA
http://help.sap.com/saphelp_46c/helpdata/en/7a/4c37ef4a0111d1894c0000e829fbbd/content.htm
CO-PC
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/fb07ab90-0201-0010-c489-d527d39cc0c6
iNVENTORY
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328
Extractions in BI
https://www.sdn.sap.com/irj/sdn/wiki
LO Extraction:
/people/sap.user72/blog/2004/12/16/logistic-cockpit-delta-mechanism--episode-one-v3-update-the-145serializer146
/people/sap.user72/blog/2005/01/19/logistic-cockpit-delta-mechanism--episode-three-the-new-update-methods
/people/sap.user72/blog/2005/02/14/logistic-cockpit--when-you-need-more--first-option-enhance-it
/people/sap.user72/blog/2004/12/23/logistic-cockpit-delta-mechanism--episode-two-v3-update-when-some-problems-can-occur
/people/sap.user72/blog/2005/04/19/logistic-cockpit-a-new-deal-overshadowed-by-the-old-fashioned-lis
Remya

Can i have sync and async listeners for the same queue ?

Hello,
I am a novice in JMS. Wondering experts over here could throw in some light !
Can I set both synchronous and asynchronous listeners for a perticular queue.
eg: pseudo code.
status; // default to start
run()
setListener(Q1); // listener sets status to stop
while(1)
waitForUserPrompt(value1);
switch(value1)
a: fun1();
break;
b: fun2();
break;
fun1()
while(status != stop)
stay in loop.
fun2()
// synchronously wait for "stop"
receive(Q1);
// wait and do following important code!
}

Hi,
I don't know in Chrome, but in Safari (pc or mac) you can open icloud.com twice on two different tab or windows and open one with contact and the other in Mail without messing up. What kind of mess to do you experience?
There is no other options to do what you want to do. You need to click on the little top cloud to switch from one to another.
Beside, I don't understand why even 2 open tab would help more than having to switch via the cloud icon. I may need to cut/paste some info from contact or calendar from time to time, but switch via the cloud icon is not really painfull.

Help requires_A Safety Belt for Logistics Extraction Queues

Similar Messages

Maybe you are looking for