Help!  Resolve Error 1647!  Any takers?

I know this may not be an Apple matter, but whatever is happening is keeping me from updating both iPod and iTunes. There must be some BONUS points for solving this error. However, no one's stepped up! I really need some help. I've missed 2 updates for iPod and 1 for iTunes. Here's the message: Error 1647! Unable to create installdrivers instance
Return code: 2147312566....
I'm trying to find a solution on this error message. Haven't had much luck! Most of what I've read isn't clear. Most importantly, I'm afraid to add anything to the system language. Any easy solutions? Can I continue to run my current (old) versions of the iPod updater and iTunes?

hi btabz!
i thought i recognised that user name. Andrew's been there and done that. but i never heard anything back from him after i replied to that thread:
http://discussions.apple.com/message.jspa?messageID=1577534#1577534
love, b

Similar Messages

  • Help resolving "Error 10401 occurrred at AI/AO Group Config"

    Hello, I know this is a common error but I'm unable to find a solution looking through these forums and other websites.  I am trying to convert a program wrote on an old computer running LabVIEW 6 to a new computer (with newer hardware) running LabVIEW 8.5.  I've resolved all issues that have came up so far (installing the traditional legacy drivers and such).  The only error I am getting now is a run-time error that pops up and reads:
    "Error 10401 occurred at AI Group Config" and "Error 10401 occurred at AO Group Config"
    I've already run the Measurement and Automation Explorer (MAX) and that did not help.  I'm using Windows XP and my hardware is a NI PCI-6281 M series DAQ.
    Do I have to re-write the sub-VI's, or is this fixable?  Is there an easier way to convert a program?
    If anyone can provide any help or insight what so ever it is greatly appreciated.
    Thanks,
    Alex

    Alex,
    This Developer Zone article may also be of some help to
    see the differences between Traditional DAQ and DAQmx for the most common tasks.
    Mark E.
    Precision DC Product Support Engineer
    National Instruments
    Digital Multimeters (DMMs) and LCR Meters
    Programmable Power Supplies and Source Measure Units

  • TS3694 how to resolve error 1015

    please help resolve error ' iPhone could not be restored.An unkhown error occurred 1015'

    Unauthorized modification of iOS
    http://support.apple.com/kb/HT3743
    ERROR 1015...
    This Error Code is indicative of the Device being jailbroken / Hacked...
    Sorry... But...
    The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
    You will need to look elsewhere.

  • I am trying to restore my iphone 3gs to 6.1.3 but i get an error (1618) any help?

    i am trying to restore my iphone 3gs to 6.1.3 but i get an error (1618) any help?

    Hey CALLMEALEX,
    Thanks for the question. I understand you are experiencing issues restoring your iPhone 3GS to iOS 6.1.3, the following article may assist you in resolving this issue:
    iOS: Troubleshooting update and restore issues
    http://support.apple.com/kb/TS1275
    Thanks,
    Matt M.

  • Error -25262 - any help here?

    I google'd it and came up with nothing.
    Basically, put in a new hard drive into my laptop and everything is fine, moved everything over including the itunes folder. It sees my music but does not allow me to authorize my computer or even allow me to sign in. When I try, I get the above error.
    Any help please?

    Sounds like an issue with your browser settings, not the site. Also, this is not the proper forum for posting a technical question about the site itself.
    1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
    2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

  • Please Help!! I deleted the folder System en Macintosh HD and now when i on my mac it says Disk Error Press Any  Key To Restart Please HELP !!

    I deleted the folder System en Macintosh HD and now when i on my mac it says Disk Error Press Any  Key To Restart Please HELP !!

    Reinstall Mac OS X.
    (59450)

  • My hotmail is unable to receive the iCloud activation mail and I cannot verify my hotmail address within the Apple ID homepage.  Any way to resolve this?  Any help appreciated

    I have a hotmail address set up as a primary account in my Apple ID homepage only.
    Any way to resolve this?  Any help appreciated

    The email address that forms the username for your AppleID is irrelevant. It does not have to be accurate, working, or even in use by you. Software purchased with a specific AppleID must use that ID to update that software.
    I don't know what happens when you change the old username for the AppleID.
    Did you change the user name for th AppleID or did you get a new AppleID with your new email?

  • TS3938 Hi, I have a sign being advised Power PC Applications no longer supported when I try to go into Microsoft Word, Excel, Entourage & MSN Messenger, hoe do I resolve this? Any help appreciated.

    Hi, I have a sign being advised Power PC Applications no longer supported when I try to go into Microsoft Word, Excel, Entourage & MSN Messenger, hoe do I resolve this? Any help appreciated Sorry, this is for a Mac Air

    Most versions of Office 2008 use an Universal installer. A few have one which is PowerPC-only.
    In any case, Mac OS X Server 10.6 can be run in emulation, and Rosetta applications can be run in it. Saying that PowerPC-only applications won't run in Mac OS X 10.7 is correct. Saying that they won't run on a Mac which shipped with Mac OS X 10.7 is not.
    (66375)

  • Ipod stuck on black screen(soft dtf) and my home button is broken. i also cant restore it with itunes as it shows error 6. any help?

    So. my home button was broken and i wanted (stupid idea) to jailbreak my ipod, i used the new redsn0w Dfu ipsw, then tried to put it in dtf mode via itunes. how ever now its just stuck on a black screen, i tried t restor it with itunes but that just comes up with an error. help?

    Errors related to third-party security software
    Error 2, 4 (or -4), 6, 1000, 9006
    Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
    There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. Your default packet size being set incorrectly can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
    Verify that access to ports 80 and 443 are allowed on your network.
    Verify that communication to albert.apple.com or phobos.apple.com is not blocked by a firewall, or other Internet security setting.
    Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps underAdvanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.
    Restore your device while connected to a different network.
    Restore using a different computer.
    Last,
    Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar 

  • HT4796 After migrating all of my adobe software (Cs4, cs5, etc.) to my new imac, the software won't open due to many errors. Any help on this?

    After migrating all of my adobe software (Cs4, cs5, etc.) to my new imac, the software won't open due to many errors. Any help on this?

    Welcome to the Apple Support Communities
    Adobe software is conflictive when you use Migration Assistant because their applications don't work properly after migration. If you keep the DVDs or the installers of your software, use them to reinstall all your Adobe applications and they should start working correctly

  • I have messages in my clipboard I did not copy or write. Any info that could help resolve this?

    I have messages in my clipboard I did not copy or write. Any info that could help resolve this?

    Copy something to overwrite that.

  • TS4185 When starting Facetime on my MAcBook Pro I receive "internal error?  any help?

    When I start Facetime on my MacBook Pro I receive "internal error. You need to quit and reopen Facetime".  I do this and nothing changes, same error.  Any ideas are welcome.

    Found this and it worked:
    Netdude21
    Re: "An internal FaceTime error occurred. There was a problem with FaceTime. " 
    Mar 28, 2011 11:14 AM (in response to iannuz86)
    I have a solution for your problem, it took a little investigating and work to get FaceTime for Mac working. Here's what I did: Go to the folder /Applications then right click on FaceTime.app go into /Contents/LaunchAgents and look for two files "com.apple.imagent.plist" and "com.apple.apsd-ft.plist" and copy them into your /Home/yourusername/Library/LaunchAgents. If you can't find "com.apple.apsd-ft.plist" do a Google search for it and download it, the name will be "com.apple.apsd.plist.txt", do a cmd-I on it and rename it "com.apple.apsd-ft.plist" put this file in the same folder as "com.imagent.plist", launch FaceTime and if your webcam lights up, your good to go. 
    Hope this helps. 

  • I am trying to update the extension manager 6.0.8 i am getting an error u44m1p7  any help with that pls

    i am trying to update the extension manager 6.0,8 i get an error (u44m1p7) any help with this issue please

    That the CS6 version
    Extension Manager 6.0.8 update
    December 10, 2013
    Macintosh | Windows
    Photoshop: Basic Troubleshooting steps to fix most issues
    Troubleshoot Update Errors
    Many update errors are caused by missing or modified files required by Photoshop, typically by a disk cleanup utility (Ex: CleanMyMac, MacKeeper, etc). Make sure you have the latest updates for your clean-up utilities or discontinue use.
    Explanations of error codes:
    U = Updater.
    44 = Install Update Error
    M1 = Automatic
    M2 = Standalone mode
    P = Patcher
    6 = Done With Errors
    7 = Installation Failed
    ISSUE: Installation failed. Error Code: U44M1P7, U44M2P7, U44M1P6
    SOLUTION: Run the installer. Reinstall Photoshop CS6 to repair/replace the missing/modified file. Select Help>Updates… to run the updater again. http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html

  • Trying to update photoshop and repeatedly get error code U44M1P7, can anyone please help resolve this?

    Trying to update photoshop and repeatedly get error code U44M1P7, can you please help resolve this?

    JJMack, Thanks for the info. Let this old man digest it and see if I can put the info into action. I'll give you a feedback. Thanks for your help in this matter. I am not a tech savvy person. 
    Rueben Rueben D. Olivas Home Ph:  1-671-969-2452
    Cell Ph:  1-671-747-2453La Luz Photography
    Email: [email protected]/Guam Firehouse Cook: http://guamfirehousecook.blogspot.com/BBQGuam: http://bbqguam.blogspot.com/My Photostream: http://ruebenolivas.megashot.net/photostream

  • Problem: ipod server could not be contacted, i went to control panel, lan settings, ck'd auto detect and went back to i-tune to update and got the same error message, any help is appreciated

    Error message: Ipod software update server could not be contacted. I went to control panel, lan settings, clk'd auto detect settings and ok. When i went back to i tunes and clk's update, i got the same error. Any help is appreciated.
    Rand221

    See the previous posts on the right side of this page under the heading "More Like This" that have you same error message.

Maybe you are looking for