Help resolving "Error 10401 occurrred at AI/AO Group Config"

Hello, I know this is a common error but I'm unable to find a solution looking through these forums and other websites. I am trying to convert a program wrote on an old computer running LabVIEW 6 to a new computer (with newer hardware) running LabVIEW 8.5. I've resolved all issues that have came up so far (installing the traditional legacy drivers and such). The only error I am getting now is a run-time error that pops up and reads:
"Error 10401 occurred at AI Group Config" and "Error 10401 occurred at AO Group Config"
I've already run the Measurement and Automation Explorer (MAX) and that did not help. I'm using Windows XP and my hardware is a NI PCI-6281 M series DAQ.
Do I have to re-write the sub-VI's, or is this fixable? Is there an easier way to convert a program?
If anyone can provide any help or insight what so ever it is greatly appreciated.
Thanks,
Alex

Alex,
This Developer Zone article may also be of some help to
see the differences between Traditional DAQ and DAQmx for the most common tasks.
Mark E.
Precision DC Product Support Engineer
National Instruments
Digital Multimeters (DMMs) and LCR Meters
Programmable Power Supplies and Source Measure Units

Similar Messages

Help with Error -10401 occurred at AO Group Config

I am receiving the error: "Error -10401 occurred at AO Group Config" and have been unable to fix it.
Some background: This is someone else's program who has since left, so I am not very familiar with it. It was running fine a little while ago, until the PCI-GPIB card broke. We got a new GPIB card (essentially the exact same model; the old one was 183619B-01; the new one is 183617K-01) and now this error appears every time I try to run it.
I believe this is being thrown by the "AO Config.vi" in my VI Hierarchy. From reading other forums, such as this: http://digital.ni.com/public.nsf/allkb/46F78EDD19BA0CC386256CEE007201FC and this: http://forums.ni.com/t5/LabVIEW/Change-in-PCI-Device-Number/m-p/2312186#M726679, it seems it may be a problem with properly assigning device numbers. (The new GPIB card may have been assigned a new device number while the program is calling the old one). However, the solution offered is to right-click on the device in MAX and change the device number, but when I right-click I am not given that option (see attached image). On the other hand, it could also be some sort of driver problem.
I am running LabVIEW 8.2.1 and Measurement and Automation Explorer 4.2.1.3001 on Windows XP SP2. Any help is greatly appreciated.
Attachments:
error.PNG ‏89 KB
right click.PNG ‏77 KB
hierarchy.PNG ‏94 KB

Hi bh424,
I would make sure that you have updated drivers as you mentioned. If you are using TDAQ make sure to reset the device driver mentioned in the KB you listed.
Another thought would to be to remove and readd the device in MAX to refresh it, and potentially change the naming in your program to reference a new named device. If you cannot rename the device in MAX you could look at repointing the device in your code.
Are you able to communicate with the device at all in MAX through simple queries? From the right click screenshot it looks like *IDN did not communicate properly.
Have you also refreshed the list or rebooted your machine?
http://digital.ni.com/public.nsf/allkb/23B5918E5604915B86256C2B005F4D70?OpenDocument
I would first ensure you can communicate with the new card in MAX alone. Here are some troublehsooting steps if that is not the case:
http://digital.ni.com/public.nsf/allkb/A80DBFCCAC36EBDE862562C80058856E?OpenDocument
There is also the possibility that the card is broken as well. If it was indeed purchased from a 3rd party vendor, there is less we know about the card or what could have been done to it before you acquired it.
Regards,
James W.
Applications Engineer
National Instruments

TS3694 how to resolve error 1015

please help resolve error ' iPhone could not be restored.An unkhown error occurred 1015'

Unauthorized modification of iOS
http://support.apple.com/kb/HT3743
ERROR 1015...
This Error Code is indicative of the Device being jailbroken / Hacked...
Sorry... But...
The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
You will need to look elsewhere.

Help - Error 10401

Hi All,
Let me open by saying I am an IT person trouble shooting this for someone else and I have almost no experience with the Labview software. The scientist using the software is only informing me that his program will not execute properly.
A little background; the program I am trying to run was developed approximately 10 years ago using Labview v5.1 and a NI PCI-6052E data card. The machine that ran the program is no longer working so I brought the program and card over onto a Windows 7pc with Labview 2012. (the older installation discs are not available to us)
I posted to the forum and had the program updated via the Version Conversion section so that it works with v2012 (or at least opens). The problem that I am getting when I run it is this error ‘Error – 10401 occurred at AI Group Config. The specified device is not a National Instruments product’.
Tech support suggested an older driver, which I installed, NI-DAQmx 9.6.1, and the error still persists.
The tech thinks that since the program was developed using T-DAQ that I need to update it somehow to recognize DAQmx functions.
Any help is very much appreciated. I am willing to share whatever I need to get this sorted out quickly. Please let me know if you need the program, screenshots, system specs, or any other information.
Thank you in advance for any assistance you can provide.
Kristian
Attachments:
OCDR.llb ‏1160 KB

I agree with the sub vi assessment. When I open the program it looks for the lvdaq.dll in a certain location, where v5.1 kept it, but finds it in a new location that corresponds to v2012 and this seems to be ok.
Do you have a sample graph you could send me? I only have the one program to troubleshoot. Or maybe point me in the direction of sample programs. As I mentioned earlier I am troubleshooting for the scientist and have extremely limited program knowledge.
Your help is highly appreciated.

Trying to update photoshop and repeatedly get error code U44M1P7, can anyone please help resolve this?

Trying to update photoshop and repeatedly get error code U44M1P7, can you please help resolve this?

JJMack, Thanks for the info. Let this old man digest it and see if I can put the info into action. I'll give you a feedback. Thanks for your help in this matter. I am not a tech savvy person.
Rueben Rueben D. Olivas Home Ph: 1-671-969-2452
Cell Ph: 1-671-747-2453La Luz Photography
Email: [email protected]/Guam Firehouse Cook: http://guamfirehousecook.blogspot.com/BBQGuam: http://bbqguam.blogspot.com/My Photostream: http://ruebenolivas.megashot.net/photostream

Help to resolve error in sending database email from SQL Server 2012.

Please help to resolve error in sending email from SQL Server 2012.
SQL Instance Version:
Microsoft SQL Server 2012 (SP1) - 11.0.3449.0 (X64)
Jun 29 2014 23:15:18
Copyright (c) Microsoft Corporation
Enterprise Edition: Core-based Licensing (64-bit) on Windows NT 6.3 <X64> (Build 9600: )
Error Message: Error MeThe mail could not be sent to the recipients because of the mail server failure. (Sending Mail using Account 1 (2015-01-15T19:48:25). Exception Message:
Cannot send mails to mail server. (The SMTP server requires a secure connection or the client was not authenticated. The server response was: 5.7.1 Client was not authenticated).)

The SMTP server requires a secure connection or the client was not authenticated. The server response was: 5.7.1
Client was not authenticated).
I think the error message is pretty clear, you have to setup authentication for the SMTP connection in Database Mail, see
Database Mail Configuration Objects
Olaf Helper
[ Blog] [ Xing] [ MVP]

HT201210 how to resolve error 21? my iphone 4 just showing apple logo... when i'm trying to restore it... it is showing error 21 n that's not letting me restore it :( pls help

how to resolve error 21? my iphone 4 just showing apple logo... when i'm trying to restore it... it is showing error 21 n that's not letting me restore it pls help

From the article that the question was posted from:
Error 1611
This error typically occur when security software interferes with the restore and update process. Follow Troubleshooting security software issues to resolve this issue. In rare cases, this error may be a hardware issue. If the errors persist on another computer, the device may need service.
Try reading the solutions you find in the future and follow them.

Error 10401 when switching to a new DAQ Card

Hello,
I am running LabVIEW 7.1. Initially the computer had a PCI-6024E DAQ card installed with Traditional NI-DAQ 7.2 and NI-DAQmx 7.2. The card worked fine.
Recently I replaced the 6024E with a PCI-6225 DAQ card and it was not recognized by MAX. I then downloaded a newer version of DAQmx, 8.6.1 (I chose this because it is compatible both with the new 6225 and also the old version of LabVIEW, 7.1). Once I installed this, MAX recognized the 6225 and it passed all of the MAX tests, so I think the hardware is fine. However, when I run I get an error 10401. I then removed the 6225 and replaced it with the 6024E again, and the old card still works fine.
With the 6225, the error 10401 occurs in 2 different subVI’s. I've attached a screenshot of the error and the subVI "DIO Port Config" where it occurs. The other subVI where there is the same error is "AI Group Config".
I have a guess for why the error 10401 is occurring. I read on this forum that these two subVIs are Traditional DAQ subVIs, which can't be used if the board (6225) is setup to use DAQmx. Is this true?
In addition to the error screen shot, I've attached a screen shot of MAX with the old card and a screen shot with the new card. You can see that the 6024 is setup to use the Traditional DAQ, but the 6225 uses the DAQmx. If the code is written using Traditional DAQ functions therefore it makes sense that there would be errors with the new card. When installing DAQmx 8.6.1 I was told that "a newer version of Traditional DAQ was suggested". MAX shows that my Traditional NI-DAQ is version 7.2. Recall this was also the version of DAQmx I had prior to installation of 8.6.1.
Could installing an updated version of the Traditional NI-DAQ and then setting up the 6225 to use this instead of the DAQmx remove these errors? If this is a solution, does the 6225 support Traditional DAQ?
I appreciate any help,
Stefan
Attachments:
Error.GIF ‏153 KB
MAX_new_card.GIF ‏48 KB
MAX_old_card.GIF ‏70 KB

It takes a little getting used to if you have never done anything but Traditional. I find that it is easier after using it for a few years now. It may be a bit of work depending on how complicated your code is. If you need help we can point you in the right direction. Look at the examples and work from there.
Tim
Johnson Controls
Holland Michigan

Wingtip Toys - Checkout Error 10401 when clicking the PayPal button

Hi
When I choose products and get a total that has decimals as for example 12,13 I do get the error shown beneath. If the total ens up with no decimals as for example 95,00 the system works ok. How to fix this error. Anybody that has an idea?
Checkout Error
10401
Transaction refused because of an invalid argument. See additional error messages for details.
Order total is invalid.
Regards Egil Ryengen

Hi Egil Ryengen,
This forum is to discuss problems of C# development. I have searched about
Wingtip Toys. This is ASP.NET Application. So you'll need to post it in the dedicated ASP.Net Forum
http://forums.asp.net for better support.
Have a nice day!
Kristin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Error 10401

Whenever I attempt to use the analog input vi's (such as AI Sample Channel, AI Acquire Waveform, etc.), then go to run the application Error message 10401 pops up: "Error 10401 occurred at AI Group Config." I'm able to set up equivalent code using the DAQ assistant feature and the applications runs perfectly fine. But every time I try to write the code myself using the vi's I just always get this same error message. I'm very inexperienced with using Lab View and MAX so I haven't been able to find a solution and was wondering what I might do to fix it. Thanks for any help you can give.

AI Sample Channel and AI Acquire Waveform are functions in the old traditional DAQ driver. The DAQ Assistant uses the newer (and better, imho) DAQmx driver. You should look at the DAQmx low level functions. There are numerous shipping examples. You can also (depending on the version) right click on the Assistant and select Gnerate DAQmx Code or right click on it and select Open Front Panel to view the DAQmx functions that the Assistant is using.
Your other option is to switch to the traditional DAQ driver but then you won't be able to use the DAQ Assistant.

'Error -10401 Occurred at AI Clock Config' When Running Certain Examples ...

I tried following the suggestion given earlier on the website link http://digital.ni.com/public.nsf/3efedde4322fef19862567740067f3cc/50f8faa83c79f07f862569f90041855b?OpenDocument
So I changed the Channel A to 0 and Channel B to 1, but still get the same error. I am doing a VI on my own that is getting the same error so I am very confused.

Hello;
I don't have detail on what exactly you are trying to accomplish there.
Can you give me more details such as what board you are using, what you need to accomplish, etc?
Meanwhile, the error -10401 occurs if you are trying to address a device that is not present. If MAX cannot see the DAQ card or you have changed the device number of the card, you will get this error. So, I recommend you first use MAX to do basic testing with the board, and check if the device number you are setting at the LV VI corresponds to the device number MAX assigned to that board.
Hope this helps.
Filipe

English Reader 9.4 - F1 Help resolves to ieindex.html

I'm customizing both the English and French .msi versions of Reader v9.4 for my organization's mass deployment.
There is a problem which exists in the English version but not the French.
Here is the issue:
F1 help resolves to: http://help.adobe.com/en_US/Reader/9.0/ieindex.html which does not exist.
I know that it should be resolving to http://help.adobe.com/en_US/Reader/9.0/index.html
I'm using the Adobe Customization Wizard. Does anyone know where to find the F1 Help value in the AcroRead.msi file?
I'd like to confirm the value is correct, before troubleshooting any kind of auto correct scenerio with our IE.
Thank you,
P

Thanks John - the error however is from Adobe. I've tried running with Admin priviledges with no change. Let me rephrase as a question:
After security update are users allowed to configure thier Adobe Reader and/or Acrobat to open "links" (e.g. URLs to other PDFs) within a PDF?
If so, how? Below is the settings I've tried so far...

Please Help - "page error" / a system error occurred

I am very basic with Coldfusion Developed websites and pretty awesome on HTML and PHP. While working on a website I made an HTML change and added a line to a page. All works well on the test website/server but after uploading the changed page the page went offline/errored a day later.
I have an error receipt and am hoping to resolve this issue with some insight from a good Coldfusion Developer or Programmer.
PLEASE HELP, see error below.
A system error occurred: http://www.mix.co.zm/mix_schools.cfm?
Error - struct
Detail    Note: If you wish to use an absolute template path (for example, template="/mypath/index.cfm") with CFINCLUDE, you must create a mapping for the path using the ColdFusion Administrator. Or, you can use per-application settings to specify mappings specific to this application by specifying a mappings struct to THIS.mappings in Application.cfc. <br> Using relative paths (for example, template="index.cfm" or template="../index.cfm") does not require the creation of any special mappings. It is therefore recommended that you use relative paths with CFINCLUDE whenever possible.
Message    Could not find the included template components/mix_documents2.cfm.
MissingFileName    components/mix_documents2.cfm
StackTrace    coldfusion.tagext.lang.IncludeTag$NoSuchIncludeTemplateException: Could not find the included template components/mix_documents2.cfm. at coldfusion.tagext.lang.IncludeTag.setTemplate(IncludeTag.java:349) at cfmix_schools2ecfm527774291.runPage(D:\hshome\mixnet\mix.co.zm\mix_schools.cfm:15) at coldfusion.runtime.CfJspPage.invoke(CfJspPage.java:231) at coldfusion.tagext.lang.IncludeTag.doStartTag(IncludeTag.java:416) at coldfusion.filter.CfincludeFilter.invoke(CfincludeFilter.java:65) at coldfusion.filter.ApplicationFilter.invoke(ApplicationFilter.java:360) at coldfusion.filter.RequestMonitorFilter.invoke(RequestMonitorFilter.java:48) at coldfusion.filter.MonitoringFilter.invoke(MonitoringFilter.java:40) at coldfusion.filter.PathFilter.invoke(PathFilter.java:94) at coldfusion.filter.ExceptionFilter.invoke(ExceptionFilter.java:70) at coldfusion.filter.BrowserDebugFilter.invoke(BrowserDebugFilter.java:79) at coldfusion.filter.ClientScopePersistenceFilter.invoke(ClientScopePersistenceFilter.java:2 8) at coldfusion.filter.BrowserFilter.invoke(BrowserFilter.java:38) at coldfusion.filter.NoCacheFilter.invoke(NoCacheFilter.java:46) at coldfusion.filter.GlobalsFilter.invoke(GlobalsFilter.java:38) at coldfusion.filter.DatasourceFilter.invoke(DatasourceFilter.java:22) at coldfusion.filter.CachingFilter.invoke(CachingFilter.java:62) at coldfusion.CfmServlet.service(CfmServlet.java:200) at coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:89) at jrun.servlet.FilterChain.doFilter(FilterChain.java:86) at com.intergral.fusionreactor.filter.FusionReactorFilter.i(FusionReactorFilter.java:566) at com.intergral.fusionreactor.filter.FusionReactorFilter.c(FusionReactorFilter.java:258) at com.intergral.fusionreactor.filter.FusionReactorFilter.doFilter(FusionReactorFilter.java: 164) at jrun.servlet.FilterChain.doFilter(FilterChain.java:94) at coldfusion.monitor.event.MonitoringServletFilter.doFilter(MonitoringServletFilter.java:42 ) at coldfusion.bootstrap.BootstrapFilter.doFilter(BootstrapFilter.java:46) at jrun.servlet.FilterChain.doFilter(FilterChain.java:94) at jrun.servlet.FilterChain.service(FilterChain.java:101) at jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:106) at jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42) at jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:286) at jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:543) at jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:203) at jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:320) at jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:428) at jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:266) at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)
TagContext    Error - array
1    Error - struct
COLUMN    0
ID    CFINCLUDE
LINE    15
RAW_TRACE    at cfmix_schools2ecfm527774291.runPage(D:\hshome\mixnet\mix.co.zm\mix_schools.cfm:15)
TEMPLATE    D:\hshome\mixnet\mix.co.zm\mix_schools.cfm
TYPE    CFML
TagName    CFINCLUDE
Type    MissingInclude

With LR closed move the preferences file to the Trash as described at the below link. You will lose your Preferences settings, so you may want to record them if unsure what you have changed from the default settings.
http://helpx.adobe.com/lightroom/kb/error-changing-modules-lightroom
DO NOT RESTART LR!
Next uninstall LR and then completely shutdown your system and turn the power OFF. Your catlog(s) will not be removed, so no worries.
Restart your system and reinstall LR using the latest version download available (LR5.4, LR4.4).
What version of LR and OS X are you using?

HT201413 How do i resolve error 47 when trying to restore iPhone3Gs?

How do i resolve error 47 when trying to restore iPhone3Gs?

Hi alsoharryshine,
If you are getting an Error 47 when attempting to restore your iPhone, you may find the following articles helpful:
Apple Support: Resolve iOS update and restore errors in iTunes
http://support.apple.com/kb/ts1275
Apple Support: Resolve specific iTunes update and restore errors
http://support.apple.com/kb/TS3694
Regards,
- Brenden

TS3694 How do I resolve error 1015? I was syncing my phone to the computer and got this error about iTunes. Now my phone is stuck on a screen with iTunes word and the USB symbol.

How do I resolve error 1015 when syncing my phone to Mac? Now the phone is stuck on iTunes icon and USB drive icon and not letting me get calls or make calls. Please help.

Wow I see from the other responses to similar questions that the phone may be jailbroken. I thought I was purchasing an unlocked phone that was legal to use with any system. What a disappointment, I will have to go back to where I purchased this phone and let them have an ear full.

Help resolving "Error 10401 occurrred at AI/AO Group Config"

Similar Messages

Maybe you are looking for