Help restore new hard drive via time machine back up in time capsule

I have followed Pondini's How Do I Restore My Entire System from a backup on Time Capsule. I get all the way to section G with No Problem. I get to section H and my new Hard Drive does not appear in the Select a Destination box. The icon indicating the system is calculating the size of the volume keeps moving. Finally it stops searching/calculating and just offers the button "go back". For some reason it doesnt recognize my new HD. I open Disk Utility and perform a check and the hard drive appears to be working fine. Any help would be greatly appreciated.

Are you sure you formatted the new drive properly, per section (c) there?
If that's not right, you can't install OSX on it.

Similar Messages

Help Restoring New Hard Drive from Time Machine

To replace a failing Macintosh HD, I created an OS X Mountain Lion boot disk on a flash drive, put my new hard drive in a USB external dock, booted to the flash drive, partitioned and formatted the new drive (selecting GUID partition), and have tried and failed three times to restore from Time Machine, which is on a Firewire-connected drive. The error I get is that it's unable to create a restore disk.
I could reformat the new drive and try again, but is there something else I'm missing? For example, should I have left the new drive in the external dock, or should I move it to bay 1 and then try to restore, considering that latency is a possible issue or that Time Machine won't restore to a USB drive?

Why don't you install ML on it and then see?
Better yet use any of the 4 internal drive bays instead of USB - slow and terrrible place!
It does not matter where or what drive bay.
Unable to unmount drive.
CLONE your system - a couple times, pure Apple Mac OS once you have one and later for working copy and one before you install or apply updates or programs or otehr changes.
CCC carbon copy cloner - will create recovery partition when you clone a system.
I assume your flash drive works, not everyone is successful first shot.
I prefer a clean install to start with. Esp as you say your system was failing I don't like relying on the Time Machine for everything.

Trying to Restore new hard drive via TC backup

I purchased a new Seagate 750GB hard drive to replace the 500GB hard drive which only had 19GB of free space available. I installed the new hard drive in my MBP 17" and here is where I am unsure if what I did was correct.
I inserted the original MAC OS X Install DVD (v. 10.5.7). 4 months ago I upgraded to v 10.6.8 but for some reason I cannot locate the disk so I inserted the orignal that with my MBP. I should say that I back up my MBP to my TC wirelessly but my initial backup of the entire hard drive was originally completed via CAT5 connection.
After I inserted the original install DVD I chose the option in Disk Utility to Restore From Backup. I went through the back up process overnight and this morning the restore was completed. I click on the button command to reboot the computer and it began the process of rebooting.
Upon rebooting a blank screen popped up with several lines of data (data looked like it was in DOS form) and the a box with a message that said "Your computer must be restarted). It had this message displayed in several languages.
If someone can help me with the following I would be very appreciative.
1. Direct me to the procedure for restoring my MBP using the most recent back up on my TC.
2. How do I override the message on my MBP that says I need to restart my computer. I restart it and the message keeps popping up.

In your Applicaiton's > Utilities folder is a program called Disk Utility.
It manages and repairs drives, sets up partitions, erases drives and partitions, changes drive formats and other things, like repairing disks and permissions.
"Permissions" are per file codes that prevent other programs from reading and/or writing and/or changing the data the file contains. If a program doesn't have permissions to access a file it can't do anything harmful.
It's this permisisons based operating system that gives OS X's "Unix" such excellent security protection.
When a clone occurs, or even a Software Update (under the Apple Menu), you give the program your admin password, which allows it to make permission file changes. Or how else can it clone the whole drive or update the operating system right?
It's these changes that likely need to be changed back to their original settings as a double check just to make sure.
Before you go seriously changing things around in Disk Utility, make sure you know what your doing.
Erasing of data can occur there, but not to your boot drive while booted from it as it won't allow it.
However while booted from the 500GB drive, you do want to erase and reformat the new 750GB drive and rid yourself of the 10.5 install you did there as it's useless (grab a copy of any files you made there first)
https://support.apple.com/kb/ht1782

Can someone please help me re-install my Creative Design 5.5 on my Mac? My MacBook Pro recently crashed and had to have the hard drive replaced. The back up from Time Machine is not reinstalling the program. Since I have the download paid, and codes, I

Can someone please help me re-install my Creative Design 5.5 on my Mac? My MacBook Pro recently crashed and had to have the hard drive replaced. The back up from Time Machine is not reinstalling the program. Since I have the download paid, and codes, I need direction on how to reinstall -- HELP?

Hi bodegakc,
If you have the serial number then please use the below mentioned link to download the product you are looking for .
CS5.5
Also before installing Please go to Applications-->Utilities--> Adobe installers and if there is any uninstaller for CS5.5 , you can remove it and do a fresh install.
You can also use creative cloud cleaner tool before installing.
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Thanks
Nikhil Gupta

HT201250 I don't store any files on my computer, I store them on a hd. Can I restore docs from my hard drive if they were backed up using time machine? And will it restore if the hd isn't even there? Like what if it got stolen or destroyed.

I don't store any files on my computer, I store them on a hd. Can I restore docs from my hard drive if they were backed up using time machine? And will it restore if the hd isn't even there? Like what if it got stolen or destroyed.

ehphotograph wrote:
Can I restore docs from my hard drive if they were backed up using time machine?
Yes.
And will it restore if the hd isn't even there? Like what if it got stolen or destroyed.
Also yes.
Directly-connected external drives (ie, USB, FireWire, Thunderbolt) are not backed-up by default. You must remove them from the exclusion list in Time Machine Preferences > Options to get them backed-up. (Network drives cannot be backed-up.)
And they must be formatted for a Mac -- any variation of Mac OS Extended.
If the drive is connected, you can browse or restore normally -- just go to the folder or document in question and Enter Time Machine.
If the drive is not connected, it's a bit different. See #E3 of Time Machine - Troubleshooting.
Message was edited by: Pondini

Installed new hard drive and windows 7 at the same time. Left old hard drives in computer but unable to get bookmarks from old drives to new.

Installed new hard drive and windows 7 at the same time. Left old hard drives in computer, installed firefox however I have no idea in which file the old bookmarks are located. I still have the old files for firefox in the old drives.

Your "Firefox personal data", like bookmarks, are stored in your Profile folder in Firefox. See this support article about how to recover that data from that old hard drive and transfer it your your new Profile.
http://support.mozilla.com/en-US/kb/Recovering+important+data+from+an+old+profile

Time machine back up on time capsule never stop

time machine back up on time capsule never stop.

You need to do a bit of troubleshooting.. and it isn't an easy one to solve.
TM could be stuck on a corrupted file..
It could be slow due to network issues.. wireless is terrible.. use ethernet if at all possible.
Is there an error message??
Look at Pondini.. http://pondini.org/TM/Troubleshooting.html
You need to load the widget A1.
Verify both the source and backup sparsebundle. A5
Look at some of the reasons he gives for over long backups.
Look at section D.
I would also need to have more info. Did this just start when you upgraded the TC firmware that was recently released.. if so expect issues.
Are you running Mountain Lion.. expect issues??
To help further we need more info.

Can't restore new hard drive from time machine back up

Looking for some help on this one....
Briefly: iMac 24" aluminium early 2008 (model 2134) trying to upgrade the original 320 gb HDD. So I bought a WD Caviar Black 64 mb, 6gb/s 1Tb drive, intalled it pretty smoothly and then using an install disc restored it from a time machine back up. That went fine then I could not restart the mac (kernel panic). So i trouble shooted with an extended hardware test, disk repair and everything seemed fine. I reinstalled my old HDD again and worked perfectly so I figured my iMac doesn't like this Caviar (due to sata3 perhaps??) so I went and bought a Seagate barracuda sata2 1 TB 7200 rpm and repated the whole process. Again everything went super smooth until the restoring process ended and the iMac was restarted. Kernel panic again. Already tried PRAM, option key. Booting from the CD or my old drive is not a problem at all but from the newly installed drive (x2) ... Impossible
Any thoughts ???
Thanks

Booting from the CD or my old drive is not a problem at all but from the newly installed drive (x2) ... Impossible
Disconnect all peripherals from your computer except for the keyboard and mouse. Double check to make sure that you installed the hard drive correctly - http://www.ifixit.com/Guide/Browse/iMac#SectioniMac_Num20
Select your imac then select hard drive replacement, and there are the instructions.
Video instructions - http://www.youtube.com/watch?v=QzuBW3mu7LI and http://www.youtube.com/watch?v=EVzYXgUhygI

New hard drive on iMac but can't use time machine backup

I just installed a new hard drive on my 2007 iMac but it will not let me back up to a time machine backup. I can see the files i want but has the red circle with this message :The folder “Documents” can’t be opened because you don’t have permission to see its contents. help!

You haven't gone about this the right way. After installing OS X, when you booted from the new drive, you were prompted to transfer data from a Time Machine backup, among other options. That's what you should have done. The simplest, but not the fastest, way to recover is to start over by erasing the startup volume and installing again.
OS X: How to migrate data from another Mac using Mountain Lion and earlier

I just replaced the hard drive on my macbook pro, reformatted new hard drive and copied over a backup from time machine now I have a kernel panic message (you must restart) - what do I do now?

i just replaced the hard drive on my macbook pro, reformatted new hard drive, installed a back up from time machine and now have kernel panic ( you must restart your computer) what do I need to do?

If you're able to boot, launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
Select the most recent panic log under System Diagnostic Reports. Post the contents – the text, please, not a screenshot. For privacy’s sake, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post "shutdownStall" or "hang" reports.
If you can't boot in the usual way, try a safe boot. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
During startup, you’ll see a progress bar, and then the login screen, which appears even if you normally log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Safe mode is slower than normal, and some things won’t work at all.

Help with new hard drive

Only a select few of us have found ourselves in this position. I am a student who takes his laptop to school for learning purposes however after doing a long night as the sound technician at a school show I put my MacBook Pro (Mid 2012 13" 4GB RAM Intel Core i5) into my bag put it over my shoulder and started to walk when I felt like a sudden weight had been lifted off my back and I heard the most colossal bang as then I find that the bag has snapped and my MacBook Pro is on the floor. When I get home I hastily go and check it and I find that there is a sizable dent in the side of my laptop where the hard drive is, so I open it up the hard drive and the SATA connection are fine and my mac still works so I continue to take it to school when a couple of days ago it completely freezes up and refuses to do anything so I turn it off and wait till I get home and then boot it up and all I get is a white screen so I press command and R. I then get I dialogue saying "INTERNET RECOVERY PLEASE WAIT", I read up on internet recovery and find it means something has gone completely wrong with my system. My hard drive has broke. So I go to school and they give me a small 60 GB hard drive spinning at 3,200 RPM which gave me some time to look for anew hard drive online whilst I could still do work on my laptop. I then find a Seagate 1 TB SSHD for £70 on Amazon so I go for it. Now I have followed all the instructions on how to install the drive which is supposedly Mac compatible I then boot my MacBook Pro up holding command and r it then boots into internet recovery I then go to restore the system through Time Machine Back-Up to then find that the SSHD isn't recognized. So I take it out and put it in my now 12 Year Old Power Mac G5 and in registers fine I then formatted it to Mac OS X Extended Journaled and partition it as GUID Partition Map for Intel Macs. I re-insert it into my MacBook Pro and go through the process again however it is still not showing up.
My Question is...
Am I doing something wrong?
Or
Is it the Solid State Hybrid Drive?
I can't Plug the new hard drive in via a SATA to USB and install Mac OS X Yosemite and my files because the only medium that has all my files on is my External Hard drive for time machine back-up.
Any help would be greatly appreciated

"It also seems a bit backwards since you have to erase a hard drive with nothing on it to format it"
At least you are not erasing anything important!! Always worth reformatting a new HD in my opinion, Apple does not make the HDs so you never know what they may have been formatted as/with/on/by etc... Also if you take time to ZERO out any data (see security options button) you would identify/isolate any bad blocks before you start using (highly recommended). This would lead to far few problems later, as you know for sure you have a sound and working disk! Definitely NOT backwards! Just good sense.

IPhoto events and pictures missing from iPhoto after restoring new hard drive and upgrade to iLife11

My iPhoto events and pictures are ALL missing from my iPhoto Library after I tried restoring my programs on a new hard drive AND upgrading to iLife11! Over the last few months, I upgraded my 2008 Macbook Pro's hard drive from a 250 GB to a 500 GB hard drive and since then have been manually installing and restoring programs and software. I decided to do things manually because I had problems with doing Time Machine backups/restores in the past, so before I upgraded the drive, I manually saved everything to a Western Digital MyStudio 1 TB hard drive that I had just for the purposes of a second back up. Anyway, I tried importing the pictures onto the new library, but couldn't find the hard copies at first, so that didn't work. I then tried deleting the iPhoto Library that came with new operating system, then copying my old backup onto the new hard drive...that didn't work either. However, when I right clicked on the iPhoto Library icon on my external hard drive (the original) and clicked on "show package contents," the folder not only contained the originals, but they were still organized by year and event just as I had them originally!
So, then I thought "why don't I try just importing the pictures directly into the new iPhoto Library!"
I tested it out, and sure enough, it worked! I then tried importing an entire folder (which, was actually the name of the event), and again it worked! So, I literally clicked and dragged my entire 2007-2009 library of pictures (which was about 35 GB) back into my iPhoto Library! AND, this only took about 30 minutes to download, enough time for me to write this post and the following instructions to Recap:
          1. Open your new iPhoto Library
          2. Go to wherever your ORIGINAL iPhoto Library is saved/backed up, then Right-click (or Control click) on the iPhoto icon
          3. Click on "Show Package Contents"
          4. Go to the folder called "Originals" or "Master"
          5. Click and drag everything INSIDE the folder (not the folder itself) to your new iPhoto Library
          6. DO NOT try Importing from inside iPhoto! For some reaseon, iPhoto can't see these images, but I promise, they're there!
I assume this could work on other iLife programs, but luckily I have MobileMe and my iCalendar updated itself, though I did have to do some tweeking...
Hope this helps other people out, GOOD LUCK!

I'm re-posting the answer to this problem so I can show it has been answered:
Open your new iPhoto Library
Go to wherever your ORIGINAL iPhoto Library is saved/backed up, then Right-click (or Control click) on the iPhoto icon
Click on "Show Package Contents"
Go to the folder called "Originals" or "Master"
Click and drag everything INSIDE the folder (not the folder itself) to your new iPhoto Library
DO NOT try Importing from inside iPhoto! For some reason, iPhoto can't see these images, but I promise, they're there!
          GOOD LUCK!!!

New tech help install new hard drive

Installing a new drive in late 2007 MBP. Read about cloning drives et al. using carbon cloner.
Instructions for cloning to an already formatted external verbatim HD - by dividing an existing partition looks simple enough.
http://help.bombich.com/kb/overview/formatting-your-hard-drive-for-use-with-carb on-copy-cloner
I would do the clone just to see how it works and have a bootable copy of my existing drive...
But what I'd like to do is - Fresh Install - everything, and pull desired data over manually from time machine back up I have on external.
QUESTION - after I install the new "unformatted drive" into computer what happens when I start it up since there is no operating system? Will I just be able to restart and use my Snow Leopard disk - NOT ORIGINAL COMPUTER INSTALLATION DISKS - to format drive and install OS ?
If so, I would do software upgrades, then install applications and updates, then get my data from time machine back up.
Any advice appreciated. Thanks.
David Stamm

You will need to do this:
Drive Preparation
1. Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
7. When formatting is completed quit DU and return to the installer. Complete the OS X installation.
When done you will boot into the newly installed system on the newly installed drive. You can then restore what you want from your backup.

Restore new hard drive from an older one

so i only have 120gb on my current hard drive. im planning on getting a 500gb hard drive to put into my mac, and buy a case for the 120gb hd so i can use it as an external hard drive. the problem is, i dont have an existing external hard drive, so the 120gb one is all i have. i want to keep all my music and photos and all that stuff, so im wondering if i can just replace the internal hard drive with the 500gb one, then connect the 120gb one via usb and restore away.
also: when i install the new hard drive, will i need to use the leopard installation dvd to install, and then transfer my files from my external hd?or will i just be able to transfer everything from the external hard drive right away? and since the external hd should be bootable, when i choose to transfer files from the external(using migration assistant or whatever) should i click use *transfer from existing mac* or *transfer from an external volume* or smth?
thx in advance for the help
Kenneth

i want to keep all my music and photos and all that stuff, so im wondering if i can just replace the internal hard drive with the 500gb one, then connect the 120gb one via usb and restore away.
Yes. Put it into an enclosure such as the case you mentioned and connect it to the computer.
when i install the new hard drive, will i need to use the leopard installation dvd to install, and then transfer my files from my external hd?
Use the installation DVD, or place the 500GB drive in an enclosure, use a tool such as SuperDuper or Carbon Copy Cloner to clone your current system to it, put the drive into the computer, and start using it immediately. No migration is needed in the second case.
when i choose to transfer files from the external(using migration assistant or whatever) should i click use transfer from existing mac or transfer from an external volume or smth?
If that step is needed, transfer the data from an external volume.
(44542)

Help with new hard drive and data recovery

I have a macbook pro 13" from early 2011...last week the hard drive crashed and after a few hours at the genius bar had to got tekserv to recover my data and get a new hard drive and update to 8GB of Ram. When I got my macbook back I was given an external hard drive that had everything from my old hard drive saved by the users on the old hard drive. I was hoping I could just transfer the user over to the new hard drive but since I had to restart the computer as a new computer I am not able to just reassign my old profile as the new one on this laptop. Maybe I've done something wrong but at this point I transferred all my documents over, moved my music and pictures over but I have a few things I can't figure out that I'm hoping someone can help with.
1. Do emails that were in my mail program from both gmail and my verizon.net program get saved somewhere or do I have to just assume those were lost?
2. my iTunes library is now there but none of my playlists are there. Should those have been saved somewhere in my iTunes folder that I should see them? I'm concerned about syncing my iPhone or iPads to iTunes without those there.
thanks for the help.

Here's the spec page on your PB. http://www.everymac.com/systems/apple/powerbook_g4/stats/powerbook_g4_1.25_15.ht ml It came with OS 10.2.7 installed. The max OS is Leopard 10.5.x
Tiger install DVDs are in short supply. Tiger is no longer available at the Apple Store but may be available for $129 by calling Apple Phone Sales @ 1-800-MY-APPLE (1-800-692-7753). For other sources, do a Google search for MA453Z/A (10.4.6), MA190Z/A (10.4.3) and M9639Z/A (10.4). Also look on eBay. Be sure & buy a retail version (black with silver X) and not a model specific version (gray) (See http://discussions.apple.com/thread.jspa?threadID=1976068 Can I use another Mac's system restore disc on my Mac?.
Also check these web stores: http://www.lacomputercompany.com/cgi-bin/rpcart/index.cgi?command=dispitem&type= sku&sku=19521 http://www.allmac.com/shop/index.php?cPath=5_10003
After you install the base 10.4.x, update to the final Tiger version 10.4.11. Here's the link for the 10.4.11 combo update http://support.apple.com/kb/TA24901?viewlocale=en_US
Look at this link Mac OS X v10.4 Tiger Installing Software Support Page
http://www.apple.com/support/tiger/install/
You can also download the Tiger Installation and Setup Guide
http://manuals.info.apple.com/en/Tiger_Install_Setup_Guide.pdf
 Cheers, Tom

Help restore new hard drive via time machine back up in time capsule

Similar Messages

Maybe you are looking for