HELP!! Return Key results in multiple lines down
Everytime I press the return key, pages returns at least 10 lines. i can't figure out what is going wrong. PLEASE HELP
Put the cursor where you just hit return. Bring up the Text Inspector, Text panel. Check the settings under Spacing for Line, Before Paragraph and After Paragraph. Those all control how much space results when you hit enter.
You probably want Before Para and After Para to be at zero. You might need to select all text before making the change.
Similar Messages
-
How do I return a match across multiple lines in UNIX?
How do I return a match over multiple lines in UNIX?
For example, I want to return the contents within tags across two lines:
<tag>content content content
content content content</tag>For the Perl example, how does the .. work?
Range Operator:
<http://www.perl.com/doc/manual/html/pod/perlop.html#Range_Operators>
...The operator is bistable, like a flip-flop, and emulates the line-range (comma) operator of sed, awk, and various editors. Each "..'' operator maintains its own boolean state. It is false as long as its left operand is false. Once the left operand is true, the range operator stays true until the right operand is true, AFTER which the range operator becomes false again.... -
Return Order Creation with Multiple Lines not possible - EHP3
Hi Experts,
We are facing an issue while creating Return Orders with external reference billing document post upgrade from CRM 7.0 to EHP3.
While we select multiple line items from the external reference billing document and Create a return order(BT120H_CPL/NewComplEF ), the very first line item gets repeated instead of all the line items getting copied to the subsequent view(BT120H_CPL/ItemList ).
Please help.
Thanks,
RohitI hope you have tried.If not can you please try with below qualifier
'015' Billing Document Number of Invoicing Party
Provide the billing document EEDK02-BELNR.
Also give qualifier at item level
E1EDP02 : use Qualifier =15
Provide the Billing document number at E1EDP02_BELNR and item at ZEILE.
I am not sure what is error you are getting when you are referencing billing document.If something STD Idoc is not working as you expected use your custom logic to bring the data when you are posting the Idoc.
I have not worked on sales order process,But I have worked on Purchase Order creation process.
Please let me know the error ,If i know the error i will defiantly help you. -
Return Order Creation with Multiple Lines not possible - 7.0 to EHP3
Hi Experts,
We are facing an issue while creating Return Orders with external reference billing document post upgrade from CRM 7.0 to EHP3.
While we select multiple line items from the external reference billing document and Create a return order, the very first line item gets repeated instead of all the line items getting copied to the subsequent view(BT120H_CPL/ItemList ).
Please help.
Thanks,
Rohit>>. But is it possible in PI 7.0?
Just few cents..
Test using SOAPUI or XMLSPY and use that same WSDL URL in the target URL of Communication channel. Just to make sure you use the right endpoint.
or
You can specify the method name as soap action dynamically using udf in mapping and see how it behaves. -
Diadem graph based on one channel resulting in multiple lines
Hi!
I'm new to diadem and have a question regarding creating graphs in diadem 10.2. I have created a channel and viewing results from the channel in a graph. The graph has text as x-channel and numeric results as y-channel (Pareto?). Now I want each new result corresponding to one label in the x-channel to be a new line in the graph, i.e. ten labels with 2 different results at each label (corresponding to two samples) should result in to lines in the graph. How can this be done in Diadem?
Please help
Thanks,
EirinHi!
I'll try to explain my problem better: I have a channel with 20 results, the results are linked to two different samples, sample1(repeated ten times)=ten results, one for each parameter(parameter = x-axis), sample2= new ten results for the same parameters. I need to generate a new curve in the graph per sample, resulting in two curves. The problem I have is that I generate two curves (I think...) but the results on each curve are identical, the graph plots only the ten first values for both curves. I need a loop that writes the correct values for each sample to the curve, so when the samplename changes value a new curve in the graph is generated plotting the next ten values. I have added my code so you can look at it.
Thank you
Eirin
Attachments:
VkBåt.zip 110 KB -
Looking for some help on emailing results using the drop down Label instead of the value
DWMX / SQL / ASP
I have a very simple form... 4 fields
1 - Textbox to enter name
2 - Drop downs to select location and type of issue
1 - Comment box to describe in more detail the issue....
I have notification setup to email the results to the
appropriate person
upon submission.. the issue im having is the following.. the
email will go
to the department that needs to get it based on the Issue
drop down... the
drop down is populate from a table containing 2 fields (
Issue Name and
Email )
My question is how can i capture the label name instead of
the value which
in this case is the email address?
I want the email to be sent to the email address, but i want
the email to
display the label name....Try this,
<%=(rsCombo.Fields.Item("issue").Value)%>
<%
if recordset("fieldname") then
response.write "Your Lable Name"
end if
%>
Dave
"Daniel" <[email protected]> wrote in message
news:elporq$pd1$[email protected]..
> forgot to add this bit
>
> this is what im using to get the data for that
> <%=(rsCombo.Fields.Item("issue").Value)%>
>
>
>
> "Daniel" <[email protected]> wrote in message
> news:elpns1$o80$[email protected]..
> > DWMX / SQL / ASP
> >
> > I have a very simple form... 4 fields
> > 1 - Textbox to enter name
> > 2 - Drop downs to select location and type of issue
> > 1 - Comment box to describe in more detail the
issue....
> >
> > I have notification setup to email the results to
the appropriate person
> > upon submission.. the issue im having is the
following.. the email will
go
> > to the department that needs to get it based on the
Issue drop down...
the
> > drop down is populate from a table containing 2
fields ( Issue Name and
> > Email )
> >
> > My question is how can i capture the label name
instead of the value
which
> > in this case is the email address?
> >
> > I want the email to be sent to the email address,
but i want the email
to
> > display the label name....
> >
>
> -
Help with jfree regarding plotting multiple lines in a line graph
hi,
i have
< time>
< volume>
i have sucessfully used this data to plot a line graph(1 line)
now i have
<time> <time2>
<volume> <volume2>
how do i put this values into a single line graph? that means, i will have a line graphs with 2 lines.
Help appreciated. Thanks Alotany help? still need help. thanks
-
Returning a result from multiple columns based on the last date that the column has a value.
I have this table named (pmtable)
ctrlno jobid docdate work1 work2 work3
1 7 2/12/2014 20 hrs
10 hrs
2 7 2/22/2014 35 hrs
15 hrs
3 7 2/28/2014
12 hrs
4 8 1/17/2014 15 hrs
13hrs
I want the result to be like this
jobid work1 work2 work3
7 35hrs 10 hrs 12 hrs
Is this possible?Hi serenace,
To achieve your requirement, you can reference the below.
DECLARE @Tbl TABLE(ctrlno INT,jobid INT,docdate DATE,work1 INT,work2 INT,work3 INT);
INSERT INTO @Tbl VALUES(1,7,'2/12/2014',20,10,NULL);
INSERT INTO @Tbl VALUES(2,7,'2/22/2014',35,NULL,15);
INSERT INTO @Tbl VALUES(3,7,'2/28/2014',NULL,NULL,12);
INSERT INTO @Tbl VALUES(4,8,'1/17/2014',15,13,23);
INSERT INTO @Tbl VALUES(4,8,'2/17/2014',15,NULL,NULL);
INSERT INTO @Tbl VALUES(4,8,'3/17/2014',NULL,16,NULL);
;WITH cte AS(
SELECT jobid,docdate,attr,value FROM
@Tbl
UNPIVOT
(value FOR attr IN(work1,work2,work3)) AS UT
cte2 AS(
SELECT jobid,attr,value , ROW_NUMBER() OVER(PARTITION BY jobid,attr ORDER BY docdate DESC) AS rn
from cte
SELECT jobid,ISNULL([work1],0) [work1],ISNULL([work2],0) [work2],ISNULL([work3],0) [work3] FROM
cte2
PIVOT
(SUM(value) FOR attr IN([work1],[work2],[work3])) AS PT
WHERE rn=1
If you have any question, feel free to let me know.
Eric Zhang
TechNet Community Support -
Hi evryone... how do i make sure to use my return(enter) key without the fn or shift key... why do i have to hold down the (fn or shift) key to be able to enter....please help
I'm not sure what you're asking - are you saying that in order to use the return key, you have to hold down the fn or shift key(s)?
That's a problem.
Clinton -
How to Update multiple line Items in Sales order Interactive form
Hi,
I have created one online interactive form for sales order. In that I incorporated dynamic table logic .i.e. we can add row and delete row using buttons. Interactive form is working fine with one line item. But if I give multiple lines in table (line item) its creating sales order with single line item. So please help me how to pass multiple lines.
Thanks & Regards,
Krishna.Hi,
Check out this link, this deals with the problem you are facing.
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/802f0ed1-a17a-2c10-7db4-d515a5b047ed
Regards,
Runal -
White line down middle of document
Need help. I have a white line down the middle of all documents, whether from computer or scanner on our MF2727nf. We have replaced cartridge and still have the problem.
Any help will be appreciated.
Thanks,
RochelRemoving and re-installing iTunes won't do any good as it does not pertain to the iPod in any way. If none of the 5 R's of troubleshooting helped, we can definitely say that it is a hardware issue with the iPod's LCD display.
http://www.apple.com/support/ipod/five_rs/
Sometimes it helps to let the battery fully drain and then redoing the 5 R's.
B-rock -
Read Key (Multiple Lines) Help
Hello! Is it possible to read multiple lines using read key VI? I'm only reading the first line right now but it would be nice if I can view the first line's explanations too.
Please see attach. Thanks in advance.
KowdTek
LabVIEW 2009
One Step At A Time, Maybe Two...
Attachments:
IDE_Read_Key.vi 20 KB
ICD3_Error_Codes.ini 9 KBGet inside the Read Key.vi. There you will find Get Key.vi. Get inside this vi. It has two outputs (excluding some others) - value and comment. But the vi itself returns only the value and the comment is left unused. Please check if that "comment" output is the "explanations" you need. If so, you could manually wire that output for your benefit.
Remember to save the vi with a different name if you will edit it.
Message Edited by Giedrius.S on 02-11-2010 10:02 PM
While evaluating my code please have in mind that I am a LV novice. Therefore sometimes my code might violate some coding rules that I have to learn about myself. But how else could I do that...
Chart zoom with "Mouse Over" effect -
How to do the multiple-line String at JList? help!
i need some code to multiple-line String at JList.
i know that it is can be done by html code.
example:
<p>line1</p><p>line2</p>
but if i use that html code...
i face another problem to my JList..
it cannot set the font use the ListCellRenderer..
like:
public Component getListCellRendererComponent(
JList list,
Object value,
int index,
boolean isSelected,
boolean cellHasFocus)
Color newColor = new Color(230, 230, 230);
setIcon(((DisplayItem)value).getIcon());
setText(((DisplayItem)value).getChat());
setFont(((DisplayItem)value).getFont());
setBackground(isSelected ? newColor : Color.white);
setForeground(isSelected ? Color.black : Color.black);
if (isSelected) {
setBorder(
BorderFactory.createLineBorder(
Color.red, 2));
} else {
setBorder(
BorderFactory.createLineBorder(
list.getBackground(), 2));
return this;
all my JList will be html type...
i don't want that happen..can be another method to do that multiple-line String in JList??
i also need to set a icon image between string in the JList. anyone get idea??
i need ur help!
thank you.I think you should create/override several methods like setText(String), setIcons(Icon[]), paintComponent(Graphics), getMinimumSize(), getPreferredSize(), etc.
I would like to code like below...:class MultilineLabel extends JLabel {
private String[] text = null;
private ImageIcon[] icons = null;
public void setText( String newText ) {
// It overrides JLabel.setText( String )
// Tokenize newText with line-separator
// and put each text into the 'text' array.
public void setIcons( Icon[] newIcon ) {
// It is similar to JLabel.setIcon( Icon ) method,
// but it receives an array of Icon-s. Set these icons to 'icons' variable.
public void paintComponent( Graphics g ) {
// It overrides JComponent.paintComponent( Graphics ) method.
super.paintComponent( g );
if ( text != null && icons != null ) {
int icon_x = 0;
int text_x = 0;
int y = 0;
// draw customized content..
for ( int i=0; i<text.length; i++ ) {
// compute x and y locations
// icon_x = ...
// text_x = ...
// y = ...
// and draw it!
g.drawString( text[ i ], text_x, y );
icon[ i ].paintIcon( this, g, icon_x, y );
public Dimension getMinimumSize() {
int width = super.getMinimumSize().width;
int height = ... // I think you must compute it with 'text' and 'icons'' arrays.
return new Dimension( width, height );
public Dimension getPreferredSize() {
int width = super.getPreferredSize().width;
int height = ...
return new Dimension( width, height );
}I think that code-structure above is the minimum to implement your requirements. (Of course if you want to implement it :)
Good luck and let me know it works or not. :) -
Thanks to Gilad D67 for showing me how to have multiple drop down menu items appear in a separate text box. This stuff blows my mind. Is there any script I can use to make a new drop down menu item appear in the same text box, but on a new line below a previous entry. For example. I select 'cat' from my drop down menu and it appears in my text box. Now I choose 'dog' from my menu and it appears in my text box like so 'cat dog.' Is there any way I can make 'dog' go straight to a new line automatically without having to manually go into the text box and change it?
cat
dog (new selection goes straight to a new line)
Now, I don't have a clue if this is also possible, but imagine, I don't like my drop down menu selection of 'dog' and I go back into the menu and I change to 'rat' but in the text box, 'dog' still appears and 'rat' is added. Do I have to manually delete 'dog' from the text box or is there script that can do this for me.
Any assistance would be incredible. It amazes me how people know this stuff.
This is the script I have so far
(function () {
// Do nothing if not committed
if (event.willCommit) return;
// Set up an array to hold the individual paragraphs of text
var aQuotes = [3];
// Populate the array with the paragraph text
aQuotes[0] = "Use common singular nouns, plural nouns [plural ‘s’] and proper names to say what things are"
aQuotes[1] = "Use numbers 1–10 to count"
aQuotes[2] = "Use basic adjectives and colours to say what someone/something is or has"
// Get the selected item, which is the export value of the selected combo box item
var item = event.changeEx
// Display the text corresponding to the selected item in the text field
getField("Text30").value += " " + aQuotes[item];You have to set the option for the text field to be multiline and then change the last line of the script to:
getField("Text30").value += "\r" + aQuotes[item];
To reset the field you can use a separate button with a Clear Form command, and then you just select this one field from the list. -
[HELP] AGO function return wrong result
Hi, i try to implement ago function in OBIEE, but the result is not as expected. Please help me to configure Time Dimension to get this work.
My case:
- I have a time dimension with this configuration:
[http://i264.photobucket.com/albums/ii176/necrombi/NEO/1-1.png]
Time Hierarchy: Total > Year > Quarter > Month > Day
Year:
Primary key: Calendar_year_cal_year_code
Chronological key: Does not define
Quarter:
Primary key: Calendar_quarter_description
Chronological key: Does not define
Month:
Primary key: Calendar_month_description
Chronological key: Calendar_month_description
Day:
Primary key: Dimension_key
Chronological key: Day_day_code
My ago function: AGO(expression, mywh.D_qn_thoigianDim."month", 1)
I do not understand why i get this wrong results:
[http://i264.photobucket.com/albums/ii176/necrombi/NEO/2.png]
Does anyone know how to solve this?
Edited by: 864451 on Jun 8, 2011 5:11 AMHi, thanks for your reply.
I implemented Time dimension with your recommend, and have time dimension like this:
Time Hierarchy: Total > Year > Quarter > Month > Day
Year:
Primary key: Calendar_year_start_date
Chronological key: Calendar_year_start_date
Quarter:
Primary key: Calendar_quarter_start_date
Chronological key: Calendar_quarter_start_date
Month:
Primary key: Calendar_month_start_date
Chronological key: Calendar_month_start_date
Day:
Primary key: Day
Chronological key: Dimension_key
And Ago function works fine with month level: AGO(expression, mywh.D_qn_thoigianDim."month", n)
But return sum result of 12 month with: AGO(expression, mywh.D_qn_thoigianDim."year", 1)
In my case, i just use AGO(expression, mywh.D_qn_thoigianDim."month", 12) to get year ago value. But i still don't understand clearly about OBIEE Time Serries functions.
Thanks,
Dung Nguyen
Maybe you are looking for
-
Slideshow in QT 7.1.3 in Windows: Frame Rate Fixed at 29.97
I have my sequentially numbered JPGS, Open Slide Show in File menu, highlight the first JPG, but then the Frame Rate is fixed at 29.97, no opportunity to set to 3 seconds per frame or 10 seconds a frame or anything except 29.97 per second. I have uni
-
Hi I am in the process of automating F-32, wherein I need to clear the customer payments automatically. It is sometime partial or full. Could any one suggest, other than BDC, if there is a standard BAPI or any other tool that helps us to clear paymen
-
Script uninstall of zenworks agent how ?
Hi! Anyone knows how to uninstall zenworks agent with a script ?
-
I've been unable to determine any sort of pattern. It's frozen when I've been running just itunes, it's frozen when I've been running chrome and excel and it's frozen when I've been running nothing. Please help. The "Genius" Bar has been worthess s
-
Please help, user browser issue.
Hi guys, i have re developed phpbb site mercedes dubai in Dreamweaver and cant able to splash top image to resize as per the user screen resolution. Please help. Thanks.