Help! Running Fortran program with Xcode

Hi all,
I am developing a Fortran code for a class project, I understand Matlab, but very little of advanced programming like Fortran or C++, but have to learn some for my class (note: it is not a programming class). The professor gave us a code to run and modify it, the code is supposed to work (and in fact it is working on windows computers). I didn't know how to run Fortran on a mac so I followed the instructions given in these links:
http://www.macresearch.org/xcodegfortran_contest_winner_damienbobillot
http://lists.apple.com/archives/fortran-dev/2006/Mar/msg00011.html
I installed Xcode 2.4, and gfortran. After I made my Project on Xcode (following the links above), I clicked Build and it was successful, but after I clicked Build and Go I got the following error:
Warning:Array reference at (1) is out of bounds
Command/usr/local/bin/gfortran failed with exit code 1
I don't know what does that mean. Can anyone help me with this?
I would like some easy-to-follow instructions to run a Fortran program with Xcode, starting from the basics.
It is hard to find an easy compiler for mac, PC people have qFortran (for free at at school) and things like that where you just have to click compile and that is it.
Thanks!
lbml

I'd need to see your code to give details, but the error you got says you declared an array with a certain number of elements and then you tried to talk to the array outside those elements.
For example you say:
integer myArray(5)
and then try to index either myArray(0) or myArray (6).
Does that make sense. I have never tried to get fortran working with Xcode, but I did get Pascal working, so it is probably better is someone else helps you, but I will try if no one steps up.

Similar Messages

How to Install crystal run time programs with out designer.

Can anyone suggest me how to install crystal run time program with out installing entire designer software.
Is it coming along with CR software package, which we have to do custom install or is it coming as a different package.
Currently my client is using only the run time programs to trigger crystal report from VB app but developers have installed entire software for development. We need to figure out how this install can be done, as it was done long time before and folks who have done it left the company.
Any suggestion on this would be of great help to me.

See this wiki:
https://wiki.sdn.sap.com/wiki/display/BOBJ/CrystalReportsforVisualStudio.NETRuntimeDistribution-Versions9.1to12.0
Ludek

Hw do u run java programs in xcode 4?

hw do u run java programs in xcode 4?
pls tell the detailed steps fr running a java program

Here is a document dated 2009: Introduction to Jar Bundler User Guide - Apple Developer
...I don't think JB is included now.

How to run the program with variant automatically

Hi experts,
I want to know how can I run the program with a variant automatically without defining any transactions or jobs. I want my program to run with a variant automatically, when I press F8.

Try doing this way...
First Create a Sel Screen varient, 'ZTEST123' in this case
Report ZTEST.
parameters:
w_kunnr type kna1-kunnr,
w_flag type c no-display.
start-of-selection.
if w_flag eq ' '.
submit ZTEST USING SELECTION-SET 'ZTEST123' with w_flag eq 'X'.
endif.
end-of-selection.
write: w_kunnr.
Thanks.

What is the best spec to run multiple programs with photographs? Includes: Lightroom, PhotoMechanic, and Internet DAM system?

What is the best spec to run multiple programs with numerous photographs? Includes: Lightroom, PhotoMechanic, and Internet DAM system?
For a Macbook Pro. What's the least amount I need to process, upload, download images using these 3 programs?
Thank you.
pt

That's a nice system Kevin, and it will work very nicely with Photoshop. I do take it that you have 16Gb RAM in Total?
250Gb SSD is a good size, but you can still run short, and that will affect Windows performance. When you get your system, instal WinDirStat which gives you a graphic display of everything on your drive, like below. Clicking on any of the large areas will tell you what and where they are, so you can think about moving cache folders etc. to one of the HDDs.
Leave the Pagefile.sys on the boot drive. Think about disabling Hyphenate as it takes a ton of space, and too often crashes on wake up.
My Documents
Desktop
Downloads
Look at Bridge cache
iTunes backup
Other stuff like that.
Think about another 500Gb drive just for Photoshop Scratch. Drives are cheap as chips nowadays
Do yourself a favour, and invest $100 in Shadow Protect (or similar if there is such a thing) SP saves incremental backups every 15 minutes (you can set the interval, but it has no impact on performance with a system like yours). If you have a problem you can mount the back up at any of those 15 minute points, and open files from it. You can also make a bootable DVD image of your C drive, and be back up and running five minutes after disaster strikes.
Optimize Performance in Photoshop
Photoshop CC and CC 2014 GPU FAQ
For more ideas, swing by the Premiere Pro Hardware forum. Those guys are serious good at this stuff, and you'll find links tips and ideas.
Happy computing, and have fun with your Creative Cloud® apps.

Xcode is not wanting to run a program with "3.1" included in filename

I have been having a strange problem with Xcode lately. The other day I was writing a program as a Cocoa Application Project and I named the file prog3.1. This was a simple command-line program that would just display some values that had been stored in variables; it's being used as an example to teach somebody Objective-C. Unfortunately, whenever I try to build and run the program I will not recieve any of the printed text or the confirmation that the program has exited successfully. The screen says that the build was successful but that's it.
I've tried using different code that I know for sure compiles and runs correctly but if it is stored in the prog3.1 file it will not output anything. I have also discovered that using 3.1 in any project name will result in this strange behavior. I can get the code to run in a file of another name, but I'm afraid that the person learning this would become too confused as to why it needs to be done this way.
Is this an unknown bug? Does anybody have a suggestion as to how I can remedy this?
iBook G4 Mac OS X (10.4.6) 933Mhz G4, 640mb RAM, Airport

Hi Joe,
The period character is used by Mac OS X to separate the file name from the file extension. It seems likely that the system cannot tell what type of file you are using because it thinks '.1' is the extension.
Perhaps '3-1' or something similar will keep things clear for your student.
PowerMac G5 1.6Ghz Mac OS X (10.4.6) 4 gig RAM & NVidia 6800 Ultra

How to run Struts program with the help of tomcat

Hello Everybody
This is Adesh.I am a newcomer of java and facing a problem with struts, so if any one know how to set the path of struts and how to run struts program, so plz inform me.
THX in Advance.............................................

struts-config.xml
<struts-config>
<action-mappings>
     <action path = "/welcome"
                type = "Welcome"
                scope="session">
            <forward name="success" path=".welcome"/>
            <forward name="failure" path=".base.error"/>
     </action>
</action-mappings>
    <plug-in className="org.apache.struts.tiles.TilesPlugin">
        <set-property property="definitions-config" value="/WEB-INF/tiles-defs.xml"/>
        <set-property property="definitions-debug" value="1"/>
        <set-property property="definitions-parser-details" value="0"/>
        <set-property property="definitions-parser-validate" value="true"/>
    </plug-in>
</struts-config>tiles-defs.xml
<tiles-definitions>
     <definition name = ".base" path = "/include/template.jsp">
          <put name = "title" value = "${title}"/>
          <put name = "header" value = "/include/top.jsp"/>
          <put name = "body" value = "${body}"/>
          <put name = "footer" value = "/include/footer.jsp"/>
     </definition>
</tiles-definitions>web.xml
<servlet>
        <servlet-name>action</servlet-name>
        <servlet-class>org.apache.struts.action.ActionServlet</servlet-class>
        <init-param>
            <param-name>config</param-name>
            <param-value>/WEB-INF/struts-config.xml</param-value>
        </init-param>
<init-param>
            <param-name>definitions-config</param-name>
            <param-value>/WEB-INF/tiles-defs.xml</param-value>
        </init-param>
        <load-on-startup>1</load-on-startup>
    </servlet>
<servlet>
        <servlet-name>init</servlet-name>
        <servlet-class>Init</servlet-class>
        <load-on-startup>2</load-on-startup>
    </servlet>
    <servlet-mapping>
        <servlet-name>action</servlet-name>
        <url-pattern>*.do</url-pattern>
    </servlet-mapping>
<jsp-config>
    <taglib>
        <taglib-uri>/WEB-INF/struts-bean.tld</taglib-uri>
        <taglib-location>/WEB-INF/struts-bean.tld</taglib-location>
    </taglib>
    <taglib>
        <taglib-uri>/WEB-INF/struts-html.tld</taglib-uri>
        <taglib-location>/WEB-INF/struts-html.tld</taglib-location>
    </taglib>
    <taglib>
        <taglib-uri>/WEB-INF/struts-logic.tld</taglib-uri>
        <taglib-location>/WEB-INF/struts-logic.tld</taglib-location>
    </taglib>
    <taglib>
        <taglib-uri>/WEB-INF/wall.tld</taglib-uri>
        <taglib-location>/WEB-INF/wall.tld</taglib-location>
    </taglib>
    <taglib>
        <taglib-uri>/WEB-INF/c.tld</taglib-uri>
        <taglib-location>/WEB-INF/c.tld</taglib-location>
    </taglib>
    <taglib>
        <taglib-uri>/WEB-INF/fn.tld</taglib-uri>
        <taglib-location>/WEB-INF/fn.tld</taglib-location>
    </taglib>
    <taglib>
        <taglib-uri>/WEB-INF/fmt.tld</taglib-uri>
        <taglib-location>/WEB-INF/fmt.tld</taglib-location>
    </taglib>
</jsp-config>
    <resource-ref>
        <description>DB Connection</description>
        <res-ref-name>jdbc/SQLServerDB</res-ref-name>
        <res-type>javax.sql.DataSource</res-type>
        <res-auth>Container</res-auth>
    </resource-ref>
</web-app>This should help....

Compile and run a program with Terminal

Hello, I used TextWrangler to create a .c file on my desktop. I want to compile and run the program using Terminal. However, I am new to programming and I am not sure how to achieve this. I have Xcode with Command Line Tools downloaded. I have the file "6_19.c" on my desktop currently. Any help would be appreciated.

Your Desktop probably isn't in your execution path, so you might want to start by moving "6_19.c" from your Desktop to your Home folder. After that, in Terminal, just do
gcc -o 6_19 6_19.c
The general format is
gcc -o <name you want the compiled program to have> <name of the source>.c
Do not put any .extension on the end of the name you want the compiled program to have. Also note that after "gcc" there's a space, then a dash and the next character is a lower case letter 'o', not a numerical zero. There's a space between the name of the compiled program and the name of the source.
To run the program, at your terminal prompt type
./6_19
The general format is dot forward slash <name of the compiled program>
There's no spaces at all.
Good luck.

Unable to Run C Program using Xcode "Stop Executable"

Hi All
Have been using the Terminal to compile programs built through Xcode but now want to use Xcode itself. Everytime I press build and go it builds successfully but won't run. I found a tutorial that mentioned if you are using Xcode 3.0 (I am) you can't use build and run, for output, you have to go to run and then push console.Ok that works. I then found someone with the same issue as mine everytime you want to build and run it appears with another window saying "Stop Executable"They were told to make sure they were building the .c file in a project and not building it from a text editor and then importing. I always build new projects.
I want to interact with the program not just see its output? so my question is can I interact with programs i.e. User can enter data or strings or, do I have to build an interface to do this through Xcode. I Also forgotten to mention I found information through the forum that said to go to First Aid through utilities and repair file permissions, this has been done but still does not work. Many thanks for your time and as you can probably tell I am new to Xcode.

To run your command-line program in Xcode, open the debugger console by choosing Run > Console. Run your program by choosing Run > Run or Build > Build and Run. You'll have to build and run if you haven't compiled the program before. Your program will run, and you will see output in the console. You interact with the program from the console.
If you're not able to enter input in the console, choose Run > Sync with Debugger. If doing that doesn't work, you can run your program in the Terminal application by double-clicking the program from the Finder. It's less convenient than running it in Xcode, but you'll at least be able to run the program and interact with it.

Using LabView to run VB program with parameters

Hi,
It's my first message here so I hope I am doing things correctly. I tried to do some research before asking and I found a lot of good informations but right now, I seem to be stuck.
I am quite new to LabView, I did few VIs here and there but nothing really "serious". I am currently working on a LabView interface that deals with VB, Excel macros and Data extraction from Text file.
The VB program is in charge of a motor position, then, some Excel macros are used to do some measurement and the results are written in a text file that I use to plot some graphs.
The VB program I made give the window I put in the picture in the attached files. Basically, you have to enter some values in those TextBox then click on Move and the motor will move. When you click on the button Home, the motor moves back to the position "0", no need of the two TextBox. In my labview interface, I created two ComboBox that contain all the possible values for both of the TextBox of my VB program. What I would like to do, when I click on my "Measure" button on LabView that initiates the VB program, is that it can fill the two TextBox from VB with the data entered in my LabView ComboBox and then run the program, simulating a "click" on the Move button.
Right now, I found a VI (included in the attached files) that runs my VB program from LabView (I use it as a Sub-VI) but I still have to manually put the values in my VB program. My goal would be that when I click on my LabView button to start my measure, the motor moves but the VB program doesn't show up for the user to manually enter the values he wants.
I hope I was clear but if you need any clarification.
I did the the VB program myself.
I can also link the LabView interface I already created if need be.
Thanks for your help,
Baptiste
Attachments:
Moteur.png ‏5 KB
lancerEXE.vi ‏9 KB

First, thank you for your answers.
I know that I don't need to use VB or LabView. I just want for myself to be able to use LabView to manage a program in VB, one in VBA and use data from a text file. I know I could write everything in VBA and that would get the job done. The thing is I want to get away from VBA and Excel as much as I can. In the future, the plan would be to re-write my VBA program with LabView but as of now, I just want to use LabView to manage everything. I know I don't really need it but I want to learn how to do it and have something that works.
So I would like to know if there is way to do what I wish to do, running my VB program with parameters coming from LabView.
Thanks

Can't run java program with GUI

My computer can run java program properly.
However, for those program with GUI (using swing),
my computer is unable to display the GUI.
What's wrong with it? Is there any PATH I need to set before running GUI program?
Thanks
icedgold

Cut, copy, paste then compile and run this;-import java.awt.*;
import javax.swing.*;
public class MyJFrame extends JFrame {
public MyJFrame() {
      super("My first JFrame");
      Container c = getContentPane();
      JPanel panel = new JPanel();
      panel.setBackground(Color.white);// (new Color(255, 255, 255));
      JLabel jl = new JLabel("Yes it works");
      panel.add(jl);
      c.add(panel);
public static void main(String[] args) {
    MyJFrame frame = new MyJFrame();
    frame.setSize(180,120);
    frame.setLocation(200, 300);
    frame.setDefaultCloseOperation( EXIT_ON_CLOSE );
    frame.setVisible(true);
}

How to Run std program with a specific variant for specific user?

Hi guys
We have a std program which will be run by different users in the company. Now the requirement is to make sure that each user runs the report with a specific varaint. Can we control this if yes how?
one options we thought about was to create a transaction in SE93 and define the program to run with a predefined varaint and assign the new custom tcode to the user profile. But we have many different users and we will end up with creating many transactions which we would like to avoid. Is there any other option to control the std program such that each user can run the program only with a pre-defined varaint and the one which only the user is suppoed to run. thanks in advance.

We have a std program which will be run by different users in the company. Now the requirement is to make sure that each user runs the report with a specific varaint. Can we control this if yes how
you can do this..
You can create a Custom table
userid keyfield
program keyfield
variant keyfield
programdesc
Make the table Maintaintable(usnig table maintenance )
Now create another Program
It takes input of the Program name( using selection screen)
LOGIC
in side that place a logic ,
Based on the user name and program name Get the variant name from above table
Now Submit the program with the variant you have selected above.
Use Variant Addition when you use SUBMIT
So now program executed based on user variant.
Now you create a Transaction for this program.
When use Runs the Transaction , user needs to input the Program name which he wants to execute.
and Output will be shown based on the variants
Regards
Vijay Babu Dudla

Running a programe with sdk1.4.1_02

please help:
I 've installed j2sdk1.4.1_02 I can compile programe but I can not run my programs I can see my class file made but I get error that class file not found would you tell me where am I going wrong?

Your issue is a "classic" one : your classpath is not correctly set.
First, have a look at the 2 following links :
http://access1.sun.com/FAQSets/newtojavatechfaq.html#1
http://access1.sun.com/FAQSets/newtojavatechfaq.html#4
If you can compile but can't run, it certainly means that the "NoClassDefFoundError" is on the class you compile.
Add the directory where you .class is in your %CLASSPATH% variable.
By the way, don't re-install your JDK. It is problably well installed.
/Stephane

How to run native program with Java program?

Hello
I've got following problem. I'd like to write file browser which would work for Linux and
Windows. Most of this program would be independent of the system but running programs not. How to run Linux program from Java program (or applet) and how to do it in Windows?.
Cheers

Try this:
Runtime rt = Runtime.getRuntime();
Process proc = rt.exec("ls -l");
InputStream stream = proc.getInputStream();
InputStreamReader isr = new InputStreamReader(stream);
BufferedReader br = new BufferedReader(isr);
String line = null;
while ( (line = br.readLine()) != null) .....
"if the program you launch produces output or expects input, ensure that you process the input and output streams" (http://www.javaworld.com/javaworld/jw-12-2000/jw-1229-traps.html)

Run a program with system exec.vi

hi
I've got a problem with system exec.
When I launch a simple program like : c:\windows\notepad.exe it works very well.
But when I launch a program with parameters, it doesn't.
here is the command line: c:\bmd.exe a.bmd a.txt ffffffff ffffffff
When I put this command line in a cmd windows it works perfectly. It don't understand...
Any idea?
Attachments:
Sans titre1.JPG ‏22 KB

Hi Julesjay,
I found out that if the command string didn't include the path of the executable (start) the program would fail (at least with matlab executables) So make sure the path of the exe is included in the command string.
Ton
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be!

Help! Running Fortran program with Xcode

Similar Messages

Maybe you are looking for