Help! Safari Autofill stopped working for no reason.

My Safari autofill has suddenly stopped working. It used to be that when a form came up on safari I could start filling it out and hit tab and it would fill in the entire form. Now it looks like it might fill in that line, but if I hit tab it doesn';t even complete the line that is highlighted. I think this started to happen after I did the latest OS X software update -- I am now running 10.4.11. I checked autofill on safari and it seems to have all the appropriate boxes checked. And if I go to the pull down menu and pull down edit and do autofill forms, it will do it. But why won't it do it using tab any more?
thanks so much,
Katarina

Hi Klaus
Thanks for the welcome and offer of help -- much appreciated.
OK, here's the info you asked for:
2010-01-14 11:43:02.875 Safari[194] An uncaught exception was raised
2010-01-14 11:43:03.129 Safari[194] * -[NSConcreteFileHandle readDataOfLength:]: Input/output error
2010-01-14 11:43:03.130 Safari[194] * Uncaught exception: <NSFileHandleOperationException> * -[NSConcreteFileHandle readDataOfLength:]: Input/output error
Jan 14 11:43:41 user-users-Vindaals crashdump[202]: Safari crashed
Jan 14 11:43:47 user-users-Vindaals crashdump[202]: crash report written to: /Users/useruser/Library/Logs/CrashReporter/Safari.crash.log
2010-01-14 19:20:54.056 Safari[313] An uncaught exception was raised
2010-01-14 19:20:54.094 Safari[313] * -[NSConcreteFileHandle readDataOfLength:]: Input/output error
2010-01-14 19:20:54.094 Safari[313] * Uncaught exception: <NSFileHandleOperationException> * -[NSConcreteFileHandle readDataOfLength:]: Input/output error
Jan 14 19:22:52 user-users-Vindaals crashdump[324]: Safari crashed
Jan 14 19:23:16 user-users-Vindaals crashdump[324]: crash report written to: /Users/useruser/Library/Logs/CrashReporter/Safari.crash.log

Similar Messages

  • I cant get a photo project to email the moblile me address to someone else.  I know how, but it has stopped working for some reason.  Instead of pulling up the web address on the email form, it puts an error message?  Any ideas?

    I cant get a photo project to email the moblile me address to someone else.  I know how, but it has stopped working for some reason.  Instead of pulling up the web address on the email form, it puts an error message?  Any ideas?

    Michael,
    The link for the word 'HERE' directs to a Evergreen School District page, which outside of Mobile Me and/or Aperture. Your school district network might be intercepting the request from Aperture and displaying the 'network authentication page' that you see, instead of the email. I would get with the IT department to see if they can help you get around this.
    Have you also tried using the 'Tell a Friend' feature from another network location, like starbucks or your home?
    Cheers,
    Owen.

  • Qosmio X500: power adapter stopped working for no reason

    Hi,
    Now i have my Qosmio X500 for a year and i like it, however i have small problems with it, and i would like to know if it can be problematic.
    The first thing is that my power adapter stopped working for no reason,
    So i bought a new one, but it always made some noise when the laptop was fully charged.
    I know people with the same laptop and their adapter didn't make that sizzling noise, it looks like it was already defect from the begin.
    Then i have one dead pixel in the middle of my screen, no problem for me.
    Finally my screen is a bit loose from the laptop, when i close it, i can move it, it always seems like it's not on it's correct place, because when i close it normally it's not 100% horizontal...
    Also when i replace my screen, my speakers make crackling noises and my webcam stops working.
    So all those problems i have annoy me, especially the last one (webcam and speakers problem), can this fit in the warranty of the laptop? I did extend the warranty for one year...
    Thanks in advance.

    > The first thing is that my power adapter stopped working for no reason,
    > So i bought a new one, but it always made some noise when the laptop was fully charged.
    I think this is AC adaptor fault maybe a broken cable or something like that I would recommend you to replace this get in contact with the dealer and ask for the new one.
    > Then i have one dead pixel in the middle of my screen, no problem for me.
    I found a info about such issues:
    +Information on screen technology and pixel failure tolerance for LCD displays
    +http://aps2.toshiba-tro.de/kb0/TSB9502LZ0000R02.htm
    > Finally my screen is a bit loose from the laptop, when i close it, i can move it, it always seems like it's not on it's correct place, because when i close it normally it's not 100% horizontal...Also when i replace my screen, my speakers make crackling noises and my webcam stops working.
    Maybe you should ask Toshiba notebook technicians for a check maybe some screws or the hinges are loose.
    The speakers should be checked with connected headphones. If you will not notice the same crackling sound using headphones, then the issue might be related to speakers

  • Gtx 970,,Stopped working for no reason

    Hi,,
    Im from Oman It is a country in the Middle East
    I own GTX 970 GAMING
     ,,, I used it for several weeks and then stopped working for no reason.I talked to the agent in the Middle East.And they told me they do not take VGAs or MBs...And They told me that i have 2 speak with the Global....I called the Headquarters (Address: No. 69, Lide St., Zhonghe Dist., New Taipei City 235, Taiwan
    Tel: +886-2-3234-5599 (REP))
    And they ask me for my email and i gave them.. Then thay say that the service Center will contact me...
    Now its Happend From 3 days and no one Contect me...

    check emails in your "SPAM" folder maybe the message is there
    else have a ask them again
    optional: >>How to contact MSI.<<

  • Safari Autofill stopped working

    Hi, since the last update last week, my autofill has stopped working. I have Safari 4.0.4 on a 20 inch iMac, 2.4 Ghz, Intel Core 2 Duo, with 3GB Ram. My software is 10.4.11.
    My autofill is turned on the address checked is valid, yet the autofill stopped working. On some websites, I can trigger it from the Edit file, but usually it says the information doesn't match.
    Can anyone help? Has anyone else had this problem?
    Thanks,
    Martha

    Carolyn, thank you SO much for this!!! I haven't tried it yet because your reply came after I had been on the phone with Apple for 3 hours and with 4 different people.
    What we found was that as soon as I marked my Vcard as "Make this my Card", the autofill started working again but it doesn't give the phone number anymore. It gives all else but the phone number. We set up a test user account and even in that one, it would give all information except for the phone number. Finally the 4th technician said we were going to delete safari and download a new one and I said I wanted to wait on that. I was exhausted by then.
    With this new information, should I go ahead and try your suggestions or is there something else I can try? The apple people and I tried everything we all could think of but I know that you forum members can have ideas that escape the best technicians.
    Thanks again, Carolyn, and thanks in advance to everyone else too.
    Martha

  • Itunes stops working for no reason

    recently itunes just stops working every now and then for no reason. I only use it to listen to my music and didn't change any settings at all. then last week i updated it to the newest version, which i thought would put an end to this. but it still keeps happening.
    i have no clue at all.
    ps. i'm using a windows 7 home edition 64 bit os and have been for a year. didn't have this problem until very recent.
    any help is appreciated

    1.  In iTunes - go to - HELP - DIagnostics
    If that does not fix the problem, I would suggest that you do a complete uninstall and reinstall. 
    To to your Control Panel and remove all Apple programs - sort by Publisher:
    uninstall:  Bonjour, Quicktime, iTunes, Apple Application Support, Apple Mobile Service Device, Apple Software Update
    Restart your PC
    Go to Apple - iTunes and download (if you are running Windows 64 bit - look for the link in the text for the link for the proper iTunes installation
    This should give you a clean installation.

  • Personal Hot-spot has stopped working for no reason

    I had a perfectly functional Person Hotspot (data tethering) feature with my Vodafone UK connection, and the data tethering plan I had enrolled proved more economical than those regular USB dongles. Recently, I upgraded my vodafone plan to allow for a higher usage - and somehow the person Hotspot just stopped working. Every time I navigate to the Personal Hotspot Button, the tab - which used to read 'Enable Personal Hotspot ON/OFF' - now reads 'Setup Personal Hotspot'. When I click on the link, it directs me to a Vodafone Iphone Advertisement page.
    I contacted Vodafone officials, even personally visited their store and got a confirmation that the data tethering plan is active, and there should be no problem with my iphone's data tethering capability. The best advise they could suggest was to backup and restore the Iphone using Itunes. Well - I tried that as well, and still the problem persists.
    Has anyone faced this problem before? Can anyone help - where exactly can I reset the Hotspot settings, or even enter it manually to get it working? I've tried backup and restore, reset cellular data network, Disable and re-enable 3G,  ejecting and re-inserting Vodafone SIM........  The hotspot was a wonderful feature, would love to get it back.........!!
    Thanks!

    Thanks Dodie.  My personal hotspot just stopped working.  I use it all the time and it was driving me crazy having to connect via usb.
    I have used the reset before and forgot all about it.
    Simple fix, get it got it, good !

  • My iphone 5s screen has stopped  working for no reason at all? how can i fix this?

    I was using it fine then locked it and tried to use it 5 minutes later and it stopped working? any ways to fix this or do i have to go onto an apple store?

    A reset may help. Tap and hold the Home button and the On/Off buttons for approximately 10-15 seconds, until the Apple logo reappears. When the logo appears, release both buttons.
    No content is affected by this procedure.

  • IPhone stopped working for no reason

    Hi,
    Need some help.
    I have had an iPhone now for a year, and it has just completly stopped working.  It hasn't been dropped or had anything spilt on it.  I have phone Orange twice now and they have gone through plugging it into iTunes and both times it did nothing except for the little apple sign to come on for approx. 20 seconds then go off.
    Orange have now told me the phone is basically dead and there is nothing I can do as its now out of warranty and I can't upgrade until May 2012!!
    Does anyone have any advice as to how I can get the phone working? 

    Hi,
    Thanks for replying. 
    I have tried that and nothing happened, should have mentioned that in my first post apologies

  • 2nd Gen Ipod Stopped Working For No Reason :/!

    Basically, i've had my ipod for about 2-3 years and today it suddenly stopped working. By this i mean, its off and i can't turn it back on!
    I can see a small light on the top right corner of the screen but that is all.
    Also you know where u put the charger in? at the bottom of the ipod? that smells a tiny bit of burnt!
    I dont know whats happened, i haven't dropped it or slipped water all over it! Please Help! i got this given as a gift so i dont know if there is any warranty!

    Try here:
    iPod touch: Hardware troubleshooting
    If not successful, yu probably have a hardare problem.  Maybe a dead battery.  I would make an appointment at the Gnius Bar of an Apple store.  It is free except for your time.

  • TS2972 Homesharing stopped working for no reason

    I tried finding an answer in other forums but couldn't find any solutions, with the possible exception of a couple of answers where someone types a 10 page essay of all the techie reconfigurations they did on their entire system to get the 15 different devices working on their multiple ATVs, but I don't think it applies to me, even if I could understand it (I'm not that savy, sorry guys!): 
    I have one Apple TV, hooked up to one TV, homesharign to my one itunes account on my one macbook.  Everything worked great, then one day just didn't, and it hasn't connected since.  I reset the router, the itunes, the ATV, etc. . . . the "computer" section on ATV acknowledges my homeshare account but tells me I can't connect to it until I turn on homesharing on my computer, meanwhile homesharing IS turned on on my computer . . . my WIFI is working, there have been no new devices introduced to the home recently, and NOTHING has changed.  Since it stopped working I also got all the latest updates for ATV and itunes, but it still doesn't work (I can't blame the updates though, it wasn't working before).  The other features of my ATV work fine, including internet radio, etc.
    Does anyone know what's going on? Thanks for any help!

    check emails in your "SPAM" folder maybe the message is there
    else have a ask them again
    optional: >>How to contact MSI.<<

  • Digital out stopped working for no reason?

    I have been using the digital out through an optical cable to my surround sound for quite a few months. Today I turned the machine on and the sound no longer comes through. The surround sound does not show a connected device.
    I have checked the cable and surround sound device by plugging in another device that has optical out - this works fine. When I plug the optical cable into the back of the mini mac it lights up.
    Does anyone have any ideas how this might suddenly stop working and if there is way to fix it? Is the output of the digital out affected by software updates (im running latest updates)?

    Hi.
    Go to system preferences and then open sound. Click on the output tab and see what info you have under name. If you see Digital Out, it is hardware related (MLB) and needs service. Try to reset the SMC of the mini as well. Here's the steps:
    http://docs.info.apple.com/article.html?artnum=303446
    Good luck.

  • Proxy Stops working for no reason, recreating with the wizard works fine

    For no reason I will start getting the following error:
    06/08/29 11:10:37 Caused by: HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: Connection timed out: connect
    I will then create a new proxy using the wizard and it will work fine the first time. Does anyone know what is going on here? I have the preference for Web Browser proxy turned off
    Here is my info:
    JDeveloper 10.1.3.0.4
    Web Services 1.4 RPC-Literal (probably should be RPC-Encoded)

    Not sure if this is the problem but the proxy is working now. It seems that when the WSDL created by the wizard hardcodes the ip address of the local machine into the soap address. Then when you create the proxy using that wizard it uses the same hardcoded ip address. So when you plug into another network get another ip address it won't work. So to make it work I changed both the webservice address and endpoint to use localhost.
    I'm new to the web services stuff so I'm looking for someone to validate this theory.
    Thanks,
    Dan

  • Safari Just Stopped Working for No Apparent Reason  -- What's Up?!

    Hi there
    I'm new to this group, and I really hope someone can help...
    For no known reason, the other day my Safari browser started to load VERY slowly and then eventually it quit. Apart from temporary trouble with broadband service, nothing has changed in my computer set-up. Now I can't even load Safari without it stalling and then quitting or 'hanging'.
    I tried resetting Safari in the Preferences tab, and also testing all plug-ins and then re-installing (it only gave me the option of upgrading to the same version of Safari i had been using) -- all to no avail.
    Any ideas?
    Thanks!

    Hi Klaus
    Thanks for the welcome and offer of help -- much appreciated.
    OK, here's the info you asked for:
    2010-01-14 11:43:02.875 Safari[194] An uncaught exception was raised
    2010-01-14 11:43:03.129 Safari[194] * -[NSConcreteFileHandle readDataOfLength:]: Input/output error
    2010-01-14 11:43:03.130 Safari[194] * Uncaught exception: <NSFileHandleOperationException> * -[NSConcreteFileHandle readDataOfLength:]: Input/output error
    Jan 14 11:43:41 user-users-Vindaals crashdump[202]: Safari crashed
    Jan 14 11:43:47 user-users-Vindaals crashdump[202]: crash report written to: /Users/useruser/Library/Logs/CrashReporter/Safari.crash.log
    2010-01-14 19:20:54.056 Safari[313] An uncaught exception was raised
    2010-01-14 19:20:54.094 Safari[313] * -[NSConcreteFileHandle readDataOfLength:]: Input/output error
    2010-01-14 19:20:54.094 Safari[313] * Uncaught exception: <NSFileHandleOperationException> * -[NSConcreteFileHandle readDataOfLength:]: Input/output error
    Jan 14 19:22:52 user-users-Vindaals crashdump[324]: Safari crashed
    Jan 14 19:23:16 user-users-Vindaals crashdump[324]: crash report written to: /Users/useruser/Library/Logs/CrashReporter/Safari.crash.log

  • The Audio randomly stops working for no reason.

    Half way through the finished video, the audio just cuts out and sometimes plays the audio from other videos over it.
    I've tried making a completely new video, but it does exactly the same thing. What is wrong?

    ThunderRhapsody wrote:
    Hp Premium Digital Headset
    Model No: HUD-02
    HP P/N: XA490AA
    Windows 7 Ultimate 64-bit
    I plug in my headset and if i press  the mute mic button, a blue light comes on telling me that headset "is" working. I can press this as much as I want, the blue light will just go on and off. all good.
    I then go to speaker button on taskbar and set HP headset as default. If I had left the mutemic on, the light will now go out. no sound will play from my speakers.
    When I click "► Test"
    an Error! message appears saying "Failed to play test tone."
    My headset has worked previously and sometimes it does work. My efforts to fix the problem seem to be futile and it is a random chance that it will work.
    I have tried every USB port on my PC, I have tried updating but it says "The best driver  software for your device is already installed"
    As I was typing this I decided to plug it into all my USB ports again and uninstall it from any that do not work, then reboot my PC and try reinstalling it.
    While doing this, I encountered this message from Device Manager "This device cannot start. (Code 10)" Updating the driver did not help so I will be uninstalling it from that port.
    For one of the USB ports, the first time I tested it, it seemed crackly, I tested it again and the test tone suddenly fails to play.
    After restarting, I plugged my headset into my favourite USB port and tested "Failed to play test tone."
    I plugged it into the next one down. Crackly noises ensued so I ran the test once more. "Failed to play test tone."
    I have got it working in one so I will leave it at that until it that ones stops. The USB port which it works in, was one that it worked in before uninstalling and rebooting.
    My problem still remains so if I could have any help, that would be great.
    also I am still under warranty so what can I do about that?

Maybe you are looking for

  • Start up problems on iMac version 10.7.3

    i recently bought a brand new 27 inch imac intel core duo i5. it has the latest software 10.7.3. sometimes when i start it up it takes ages to load then i have to "log in" however i haven't selected to log in. when it finally loads its really glitchy

  • Mapping with XSD?

    hello  all,                  i am having an XSD file . i am thinking to go for message mapping . with this XSD format how can i go for message mapping . for that i need  a  data structure . please suggest me how i have to do this my receiver interfac

  • Time Remapping

    I must be looking in all the wrong places but I can not seem to get keyframes working, for effects such as time remapping is there a tutorial for timeremapping I can not get it to work I am so confused.

  • Please, please, please release the iPhone to Sprint.  Will it ever be?

    Will Apple ever release the iphone to Sprint.  We deserve the opportunity to have the best on the market.

  • Where'd the 5 computer accounts go?

    I tried to play a song that I had downloaded on another computer. It said something like I needed to 'authorize' this computer to play that track. I tried to authorize it and got a message that I've run out of accounts and need to 'de-authorize' a co