Help! Sample application

How can i use Sample Application , Experts?

Hi,
Its already there in oracle by exaple
for version 11,
http://www.oracle.com/technology/obe/hyp_fp/PLN11.1.1_Create_Classic_App/pln_create_classic_app.htm
Sandeep Reddy Enti
HCC
http://hyperionconsultancy.com/

Similar Messages

Urgent help; Sample application

Hello All,
I am new to smart card application, however, i undertstand the concept of the JavaCard platform for developing applets and OpenCard Framework for developing host-based applications for the CAD.
But i require how to integrate an entire end-to-end smart card application.
Getting a complete sample application as simple as an electronic purse application, that is both the card side and reader side application and an explanation of how to put them all together installing on the card and testing will help me a lot.
Most books/tutorials concentrate on just the card side or the host-based application. i need to knwo how to put them together.
Does any one know where i can get help with this?
Thanks,

thanks a lot,
I am really grateful for the information. I have downloaded and installed the SmartCard Tool set from the URL you gave.
I can also write VB6 conveniently, I also understand how APDUs work. I have Eclipse+JCOP3. Infact i have written a card applet using Eclipse+JCOP3.
I read some tutorial on JCShell to see if i could test the applet using the JCShell console in JCOPs plug-in for ecllipse. I but was wondering how i'd test it by writing a host application. that can communicate with it; do PIN verification, send data and have it processed.
What further hand can you give me with the use of this SC Toolset.
Also i bought a card reader and then found out it was the wrong one. Can you give information on where i could get a PC/SC complaint reader as well as smart cards.
Regards

Beginner Question - Help Needed for EJB QL Sample Application

I'm working with a group of student interns, like myself, and we've been given an assignment to work with Oracle. All of us have no training or experience with this, so we're just learning as we go.
I've been trying to run the EJB QL Sample Application (http://www.oracle.com/technology/sample_code/tech/java/ejb_corba/ejbql/Install.html), but I keep running into problems at step 3.
Now, we will deploy the sample application onto OC4J. Open another command prompt and go to the folder <OC4J_HOME>/j2ee/home and run the following commands one-by-one
> java -jar admin.jar ormi://<machine_name>:<admin_port> admin <admin_pwd> -deploy -file <SAMPLE_HOME>/build/ejbql.ear -deploymentName Ejbql
> java -jar admin.jar ormi://<machine_name>:<admin_port> admin <admin_pwd> -bindWebApp Ejbql ejbql-war http-web-site /ejbql
where,
<machine_name>      Name of the machine where OC4J Server is running
<admin_port>      Admin Port on which the OC4J server listens. This value by default is 23791 unless explicitly changed by the user
<admin_pwd>      Adminstrator password to access OC4J. The default value is welcome
When I do this step I get this error:
Error: Unable to find java:comp/ServerAdministrator: Lookup error: javax.naming.
AuthenticationException: Invalid username/password for default (sds); nested exc
eption is:
javax.naming.AuthenticationException: Invalid username/password for defa
ult (sds)
com.evermind.client.orion.AdminCommandException: Unable to find java:comp/Server
Administrator: Lookup error: javax.naming.AuthenticationException: Invalid usern
ame/password for default (sds); nested exception is:
javax.naming.AuthenticationException: Invalid username/password for defa
ult (sds)
at com.evermind.client.orion.Oc4jAdminConsole.executeCommand(Oc4jAdminCo
nsole.java:105)
at com.evermind.client.orion.Oc4jAdminConsole.main(Oc4jAdminConsole.java
:27)
javax.naming.NamingException: Lookup error: javax.naming.AuthenticationException
: Invalid username/password for default (sds); nested exception is:
javax.naming.AuthenticationException: Invalid username/password for defa
ult (sds) [Root exception is javax.naming.AuthenticationException: Invalid usern
ame/password for default (sds)]
at com.evermind.server.rmi.RMIContext.lookup(RMIContext.java:153)
at com.evermind.client.orion.Oc4jAdminConsole.executeCommand(Oc4jAdminCo
nsole.java:102)
at com.evermind.client.orion.Oc4jAdminConsole.main(Oc4jAdminConsole.java
:27)
Caused by: javax.naming.AuthenticationException: Invalid username/password for d
efault (sds)
at com.evermind.server.rmi.RMIConnection.connect(RMIConnection.java:2410
at com.evermind.server.rmi.RMIConnection.connect(RMIConnection.java:2226
at com.evermind.server.rmi.RMIConnection.lookup(RMIConnection.java:1692)
at com.evermind.server.rmi.RMIServer.lookup(RMIServer.java:727)
at com.evermind.server.rmi.RMIContext.lookup(RMIContext.java:134)
... 2 more
---- Embedded exception
javax.naming.AuthenticationException: Invalid username/password for default (sds
at com.evermind.server.rmi.RMIConnection.connect(RMIConnection.java:2410
at com.evermind.server.rmi.RMIConnection.connect(RMIConnection.java:2226
at com.evermind.server.rmi.RMIConnection.lookup(RMIConnection.java:1692)
at com.evermind.server.rmi.RMIServer.lookup(RMIServer.java:727)
at com.evermind.server.rmi.RMIContext.lookup(RMIContext.java:134)
at com.evermind.client.orion.Oc4jAdminConsole.executeCommand(Oc4jAdminCo
nsole.java:102)
at com.evermind.client.orion.Oc4jAdminConsole.main(Oc4jAdminConsole.java
:27)
Any suggestions to fix this error?
Thanks in advance for any help.

George,
The Readme.html file is available with the ejbqlsample.jar downloadable (Extract and find the doc in Ejbql\docs\Readme.html) which is printable.
Or,
If you are trying to print the file directly from OTN site, you need to set the Page-Setup Orientation to 'Landscape'.
Hope this helps.
Regards
Pushkala

Can any one help me giving sample application of consuming webservices

Hello friends,
I am doing struts application, where we consume webservice for validating the data I want sample application in calling webservice's. can anyone help me

Thanks Markus for the Confirmation.
Just need one more confirmation on the below one aswell
I applied a Patch to my Development Meachine , But Later the User requested saying that He dont want that Perticular Basis Patch Installed, So Can we Uninstall / Revoke / Delete the Installed Basis / HR Patch on the SAP Server ?.
If we can kindly Let me know how to Proceed in Revoking the Patch.
Thanks
Dan

Need help in creating a sample application using Oracle I\PM 10gR3.

I am a new to Oracle I\PM 10gR3 and I need a guide to create a sample
application using Filer and a sample Process.
I have searched the net and was unable to find any documents. If any body has
any kind of guide to create an application please let me know.
Waiting for a response.

Please see Kenichi Unnai in his blog "How to use UWL API for NetWeaver BPM Tasks"
How to use UWL API for NetWeaver BPM Tasks
The .sca-file can be found on the sap service marketplace, afterwards you need to import the .sca-file, add the SC to your "MyComponents" and then you can select your necessary DC's.

Need help to register HFM sample applications in Shared Services

Hi all,
I have installed HFM 9.3.1 on the server and I have issues in locating the sample application in the HFM console. I want to register the sample application with Hyperion shared services. But when I tried opening the application, I do not see the sample application and also got an error saying,"cannot connect to server".
When I tried creating new application I got an error saying,"there is an error retrieving the user management project list.Please verify that the project exists".
All I want to do is, to provision the shared services users to the HFM sample applications. Could you provide some suggestions to overcome this issue? I'll appreciate your quick response.
Regards,
Leo

Try using the server name instead of the cluster name.

Need help in registering HFM Sample applications with Shared Services

Hi all,
I have installed HFM 9.3.1 on the server and I have issues in locating the sample application in the HFM console. I want to register the sample application with Hyperion shared services. But when I tried opening the application, I do not see the sample application and also got an error saying,"cannot connect to server".
When I tried creating new application I got an error saying,"there is an error retrieving the user management project list.Please verify that the project exists".
All I want to do is, to provision the shared services users to the HFM sample applications. Could you provide some suggestions to overcome this issue? I'll appreciate your quick response.
Regards,
Leo

Try using the server name instead of the cluster name.

SSO java sample application problem

Hi all,
I am trying to run the SSO java sample application, but am experiencing a problem:
When I request the papp.jsp page I end up in an infinte loop, caught between papp.jsp and ssosignon.jsp.
An earlier thread in this forum discussed the same problem, guessing that the cookie handling was the problem. This thread recommended a particlar servlet , ShowCookie, for inspecting the cookies for the current session.
I have installed this cookie on the server, but don't see anything but one cookie, JSESSIONID.
At present I am running the jsp sample app on a Tomcat server, while Oracle 9iAS with sso and portal is running on another machine on the LAN.
The configuration of the SSO sample application is as follows:
Cut from SSOEnablerJspBean.java:
// Listener token for this partner application name
private static String m_listenerToken = "wmli007251:8080";
// Partner application session cookie name
private static String m_cookieName = "SSO_PAPP_JSP_ID";
// Partner application session domain
private static String m_cookieDomain = "wmli007251:8080/";
// Partner application session path scope
private static String m_cookiePath = "/";
// Host name of the database
private static String m_dbHostName = "wmsi001370";
// Port for database
private static String m_dbPort = "1521";
// Sehema name
private static String m_dbSchemaName = "testpartnerapp";
// Schema password
private static String m_dbSchemaPasswd = "testpartnerapp";
// Database SID name
private static String m_dbSID = "IASDB.WMDATA.DK";
// Requested URL (User requested page)
private static String m_requestUrl = "http://wmli007251:8080/testsso/papp.jsp";
// Cancel URL(Home page for this application which don't require authentication)
private static String m_cancelUrl = "http://wmli007251:8080/testsso/fejl.html";
Values specified in the Oracle Portal partner app administration page:
     ID: 1326
     Token: O87JOE971326
     Encryption key: 67854625C8B9BE96
     Logon-URL: http://wmsi001370:7777/pls/orasso/orasso.wwsso_app_admin.ls_login
     single signoff-URL: http://wmsi001370:7777/pls/orasso/orasso.wwsso_app_admin.ls_logout
     Name: testsso
     Start-URL: http://wmli007251:8080/testsso/
     Succes-URL: http://wmli007251:8080/testsso/ssosignon.jsp
     Log off-URL: http://wmli007251:8080/testsso/papplogoff.jsp
Finally I have specified the cookie version to be v1.0 when running the regapp.sql script. Other parameters for this script are copied from the values specified above.
Unfortunately the discussion in the earlier thread did not go any further but to recognize the cookieproblem, so I am now looking for help to move further on from here.
Any ideas will be greatly appreciated!
/Mads

Pierre - When you work on the sample application, you should test the pages in a separate browser instance. Don't use the Run Page links from the Builder. The sample app has a different authentication scheme from that used in the development environment so it'll work better for you to use a separate development browser from the application testing browser. In the testing browser, to request the page you just modified, login to the application, then change the page ID in the URL. Then put some navigation controls into the application so you can run your page more easily by clicking links from other pages.
Scott

Sample application WMADemo

Hi
i was going through the sample application provided in the Sun's wireless toolkit 2.2 named WMADemo.
There is a midlet class in it named SMSReceive.java.
The code in its startApp() function is
public void startApp() {
/** SMS connection to be read. */
String smsConnection = "sms://:" + smsPort;
/** Open the message connection. */
if (smsconn == null) {
try {
smsconn = (MessageConnection) Connector.open(smsConnection);
smsconn.setMessageListener(this);
} catch (IOException ioe) {
ioe.printStackTrace();
/** Initialize the text if we were started manually. */
connections = PushRegistry.listConnections(true);
if (connections == null || connections.length == 0) {
content.setString("Waiting for SMS on port " + smsPort + "...");
done = false;
thread = new Thread(this);
thread.start();
display.setCurrent(resumeScreen);
Now what i want to ask is since they have already set message listener for the current message connection and have called thread.start() in the notifyIncomingMessage function then why the have called thread.start() in the startapp also.
Won't it unnecessarily block by calling receive() method even if there is no message to receive.
Can anybody help me

Hi
i was going through the sample application provided in the Sun's wireless toolkit 2.2 named WMADemo.
There is a midlet class in it named SMSReceive.java.
The code in its startApp() function is
public void startApp() {
/** SMS connection to be read. */
String smsConnection = "sms://:" + smsPort;
/** Open the message connection. */
if (smsconn == null) {
try {
smsconn = (MessageConnection) Connector.open(smsConnection);
smsconn.setMessageListener(this);
} catch (IOException ioe) {
ioe.printStackTrace();
/** Initialize the text if we were started manually. */
connections = PushRegistry.listConnections(true);
if (connections == null || connections.length == 0) {
content.setString("Waiting for SMS on port " + smsPort + "...");
done = false;
thread = new Thread(this);
thread.start();
display.setCurrent(resumeScreen);
Now what i want to ask is since they have already set message listener for the current message connection and have called thread.start() in the notifyIncomingMessage function then why the have called thread.start() in the startapp also.
Won't it unnecessarily block by calling receive() method even if there is no message to receive.
Can anybody help me

Problem with ur sample Application

To The JDeveloper Team
i developed an application to do basic authentication with the Database using a JSP. i was able to sign in proper but when i sign out of the application , i can't sign out ie the session variables are not clearing out and then i went to ur sample application and test it , it also works the same way ie it doesn't clear the session variables. Can u refer it and give me a suggestion. If u want to know the exact problem this is it.
U have a sign-in url in ur auctions application . After u sign-in ,it is converted in Signout url . But if i click on it , it does show the sign-in but shows the sign out only.
null

Airton,
Before running bankapp, you must set the BLKSIZE parameter in the bankvar
file to a multiple of the machine file.
The README file explains how to set BLKSIZE.
For HP-UX, BLKSIZE must be set to 1024 or to a multiple of 1024.
Ed
<Airton Vargas> wrote in message news:[email protected]..
I'm trying to configure and run the bankapp application for Tuxedo 8.0 under
HP-UX, but I'm getting errors to connect to database.
I'm using the RM=TUXEDO/SQL and when I run the script crbank I get
the the following error messages:
sql: Operation 'create table': rm error
sql: LIBDUX_CAT:475: block size invalid
sql: Operation 'LIBSQL_CAT:74: create index (table file)': rm error
sql: LIBDUX_CAT:460: invalid rm file name
Does anyone know how to solve this problem?
Thanks in advance for any help!
Best regards,
Airton

Sample application for connecting to model in WD java

Hi ,
Can any one help me out how to connect to model to access sql as i am very new to webdynpro java.

Hi Vijayalakshmi,
Check these
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/user-interface-technology/webdynpro/wd%20java/wdjava%20tutorials%207.0/using%20ejbs%20in%20web%20dynpro%20applications.pdf
Check this for sample applications & tutorials
https://www.sdn.sap.com/irj/sdn/webdynpro?rid=/library/uuid/49f2ea90-0201-0010-ce8e-de18b94aee2d#20
regards
Sumit

Sample application of Flex using java

Can anybody tell or send any URL regarding sample applcation i.e.
developed using Flex and java
I am confused abt web.xml
means how to integrate that flex application.

Thx Dear,
At least I got some reply from someone.
Actually I m trying to search it but not getting any help.
My prob is.
I want to develop sample application using Flex and Spring framework.
Let say there is form called
Employee.mxml & there are 2 text boxes for username & password .I want to read values entered by user in these text boxes from flex form using Spring framework.
so can u send me any URL sothat i can get help for this.
Please help me ASAP.

Problem in Sample application LifeCycle Dataservice

Hi..
I run a sample application in Lifesycle dataservce.
Sample is lcds-samples/testdrive-remoteobject. its working fine. main.swf file execute and show data.
i compiled the main.mxml source file and overide the existing swf file but it doesnt work.. i didnt do any modification in the main.mxml.
I checked the file size of both there is a diffent of file size to... So what can be the reason to not run the source file after compile ?
Is there any compile time arguement should entered..
thnx
regards
Amila

What happens when you try to run the app? Are your getting errors, or if the app launching but with a blank screen?
Sometimes an app will run locally, but when you upload it to the web you must compile with the -use-network=true compiler option.
If this post answers your question or helps, please mark it as such.

PL/SQL SSO SDK Sample Application doesn't work!

In the latest document on the SSO SDK (http://download-east.oracle.com/docs/cd/A97329_01/manage.902/a96114.pdf), there is a major programming error in the sample application on page 4-5. There is an invalid EXCEPTION block followed by an invalid ELSE block.
There is absolutely no help from Oracle Support or Metalink on this issue. I am calling upon all Portal Developers frustrated with this very obvious syntax error to pressure Oracle to rewrite this document ASAP. From what I have read, this seems to be a problem since mid-2000. Let's flood Oracle Support with e-mail demanding this issue to be resolved at the highest priority!
I can't believe Oracle would allow this document to be released without being thoroughly proofread!

Bill, thanks for bringing this to our attention. We certainly do our best to avoid documentation inaccuracies. Given the scope of the documentation, unfortuately occationally things slip through and we certainly appreciate it when people take the time to let us know if they find a "doc Bug".
Hopefully this won't happen too often but just in case (refering to the documentation)
If you find any errors or have any other suggestions for improvement, please indicate the title and
part number of the documentation and the chapter, section, and page number (if available). You can
send comments to us in the following ways:
Electronic mail: [email protected]
FAX: 650-506-7375 Attn: Oracle9i Application Server Documentation Manager
Post:
Oracle Corporation
Oracle9i Application Server Documentation
500 Oracle Parkway, M/S 1op6
Redwood Shores, CA 94065
USA
Thanks again

Hyperion Installation and Sample Application Problem

Hi,
I am a new user of Hyperion Planning 9. I am an Oracle DBA by profession with training and experience in Data Warehousing.
After the installation of Hyperion Planning 9.3.1, I do not have dimension library under http://server4:19000/workspace -> navigate
I want to load the Sample Application to practice with Hyperion functionalities.
Implementation: (VMWare Server)
1. Oracle Database - Server1
2. Hyperion Shared Services - Server2
3. Hyperion Essbase - Server3
4. Planning, BI+ - Server4
Any advice/assistance will be appreciated.

Did you give your self admin access in Shared Services (http://localhost:58080/interop/)? When installing the application the admin user only has provision rights and can't access the dimensions.
You can also go to planning directly by going to this link instead of going through workspace:
http://localhost:8300/HyperionPlanning/LogOn.jsp
Does this help?

Help! Sample application

Similar Messages

Maybe you are looking for