Help SAP BI Datasource - DB Connect

Hello,
I have a datasource whose source is Oracle system via DB Connect.
I have used the Table/View with user in extraction tab of datasource and because of this the default fields of view/table are being proposed and copied to fileds tabs.
But i have to use my own created fields in infoobject template but though i enter technical name in infoobject template and try to enter it does not copy its properties.
I am not sure how can i use my fields and remove table/view fields.
Please help.
Regards
Syed
Edited by: Syed786 on Oct 18, 2011 7:13 AM
Edited by: Syed786 on Oct 18, 2011 7:40 AM

Hi Syed,
i've tried to do the same sometime back and i was not able to assign my infoobjects to the fields.
As far as i remeber, this can be do only in Flatfile datasources, where you assign the infobjects to the fields and the properties of the infoobjects would be copied to that particular field.
Regards,
Sudheer

Similar Messages

Open HUB ( SAP BW ) to SAP HANA through DB Connection data loading , Delete data from table option is not working Please help any one from this forum

Issue:
I have SAP BW system and SAP HANA System
SAP BW to SAP HANA connecting through a DB Connection (named HANA)
Whenever I created any Open Hub as Destination like DB Table with the help of DB Connection, table will be created at HANA Schema level ( L_F50800_D )
Executed the Open Hub service without checking DELETING Data from table option
Data loaded with 16 Records from BW to HANA same
Second time again executed from BW to HANA now 32 records came ( it is going to append )
Executed the Open Hub service with checking DELETING Data from table option
Now am getting short Dump DBIF_RSQL_TABLE_KNOWN getting
If checking in SAP BW system tio SAP BW system it is working fine ..
will this option supports through DB Connection or not ?
Please follow the attachemnet along with this discussion and help me to resolve how ?
From
Santhosh Kumar

Hi Ramanjaneyulu ,
First of all thanks for the reply ,
Here the issue is At OH level ( Definition Level - DESTINATION TAB and FIELD DEFINITION )
in that there is check box i have selected already that is what my issue even though selected also
not performing the deletion from target level .
SAP BW - to SAP HANA via DBC connection
1. first time from BW suppose 16 records - Dtp Executed -loaded up to HANA - 16 same
2. second time again executed from BW - now hana side appaended means 16+16 = 32
3. so that i used to select the check box at OH level like Deleting data from table
4. Now excuted the DTP it throws an Short Dump - DBIF_RSQL_TABLE_KNOWN
Now please tell me how to resolve this ? will this option is applicable for HANA mean to say like , deleting data from table option ...
Thanks
Santhosh Kumar

SAP Server has lost connection to the database!

Hi Gurus,
Can some please guide me on this " SAP Server has lost connection to the database! " what need to be check.
OS : AIX
DB : DB2
thanks
vamsi

Hello,
1)Check if the DB is running.Issue the following command @ the DB-level
db2 connect to <SID>.
2)Also check R3trans -d from the app. server and check for trans.log file for the error.
Hope it helps.
Regards,
Prasanna
Edited by: Kulkarni Prasanna on Jul 24, 2008 3:53 PM

OATS: Error Creating datasource client connection

Hi All
When i try to add montiors in the OATS controller machine i am getting the following error .
Error while creating datasource client connection.
i am trying to monitor a linux machine. I am able to ping that machine from controller.
when i tried to do
plink.exe username@hostname i am getting the following error ...
FATAL error : Network error : Connection timed out..
Can anyone please help me on this??
Thanks

I'm not sure if this is the same problem but the following thread may help (mentioning the ports that may need opening on your firewalls)...
Re: What are the various ports used by OLT?
oracle.port.rmi=4444
oracle.port.http=8088
oracle.port.empstart=9001
oracle.port.uil2=7071
oracle.port.dataCollector=7073
oracle.port.webservice=8083
oracle.port.jndi.rmi=1098
oracle.port.jndi=1099
oracle.port.https=8433
* 9001 (Agent Comunication Port)
* 1099 (Datacollector Comunication Port)
* 8088 (for running OpenScript scripts)

SAP standard datasource for IDEX stream in SAP BI

HI
We are implementing SAP ISU retail project.Is there any Sap Standard datasource or Data Extractor for IDEX ?
THanks
DLK

Hi,
I don't see any Sap Standard datasource or Data Extractor for IDEX.
But may be documentation will be usefull:
Please, Refer to those links:
Intercompany Data Exchange u2013 Extended (SAP IS-U/IDEX)
http://help.sap.com/saphelp_rc10/helpdata/en/ef/7995d87d4a4fc3a064b440b7955444/content.htm
Intercompany Data Exchange
http://help.sap.com/saphelp_rc10/helpdata/en/f0/7ce4382763855ee10000000a114084/frameset.htm
All the best.
Best Regards,
Amine

SAP PCM 7.0 Connectivity with SAP Business Objects

Hi All
We are trying to integrate SAP PCM 7.0 FP5 with Business Objects. The prime purpose is to fetch PCM data into Xcelsius dashboard and WebI reports via BO Universe.
We are sruggling to understand the plugins required to do this.Since other SAP documentation states that SAP BO Connectivity pack is required which is a part of SAP BusinessObjects Profitability and Cost Management 7.5 Support Package 06
But , we understand that SAP BO PCM75 Support pkg06 cannot be installed on SAP PCM 7.0.
Also, Please kindly help me in understanding if SAP PCM 7.0 connectivity with BOXIR3 (without using BW NW layer) is possible or it needs to be upgraded to SAP PCM 7.5
Thanks

Hello Siva,
I am thinking that you may need to deploy FTP adapter in PI to get this process work fine but not sure.
Let's see what other experts suggest.
Thanks,
Siva Kumar

SAP BI - Data Services connection

Hello
I am trying to set up SAP BI - Data Services connection.
Couple of questions :
1. Where from within the SAP can I get SAP gateway hostname and SAP gateway service name
2. I have a developer right on BW. Is it enough to make connection with my user id?
3. connection to BW is via client security portal. Does it change the approach?
Thanks

Hi,
1. Where from within the SAP can I get SAP gateway hostname and SAP gateway service name
From the sapgui.
2. I have a developer right on BW. Is it enough to make connection with my user id?
Yes
3. connection to BW is via client security portal. Does it change the approach?
What does that means? you need a user and password in BW (ABAP).
As suggested by Andrei, read the wiki. It has all you need to make it work.
Hope this helps.
Cheers,
Diego

Can all SAP System releases be connected to VC?

Hello folks,
our customers would like to know if it is possible to also connect older SAP System Releases like R/3 4.7 to the Visual Composer or even older releases. Are there any connection restrictions concerning the SAP Backend System Release?
Thanks,
Katharna

Hi Katharina,
this is standard connector, which is described here:
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/de/21/58feb70e884bc68a474429ac26f448/content.htm">http://help.sap.com/saphelp_nw2004s/helpdata/de/21/58feb70e884bc68a474429ac26f448/content.htm</a>
So it should be possible that you can use your R/3 system with Visual Composer.
Best Regards,
Marcel

SAP ISA B2C - concurrent connections

We have a SAP ISA Solution develop over CRM 4.0.
We are in productive now.
We are getting some performance issues in our CRM system (CRP) when we
have a high number of users in our SAP ISA B2C site at the same time.
Weve noticed that our CRM system is not responding so well, the Dialog
instances are always in its maximum processing, leading to a bad
performance in our Online Site.
We get all the Dialog processes (21) fill up with the execution of the
reports SAPLSZA0 and SAPLSZA13, getting 20 25 seconds to process the
request. It seams that these processes refer to our default user login
(when a client enters in our site, the site automatically logs him in
our system, with our default user). In a normal user site access the
processes only take 1 2 seconds.
We had to close the site, temporarly to see if we could solve the problem.We have closed the site in the firewall, but still, all these processes
remained in the CRM system and they have continued there until we have
turn off our SAP ISA J2EE application server (always coming more and more
processes). Only then the processes disappeared from the CRM system.
Is J2EE making a big queue of processes when we get a high number of
connections, even when the users has left the site?
There is some tool to analyse how many connections we have in a specific moment ?

Hello Harsha,
perhaps you get some help in the Best Practice Guide http://help.sap.com/bp_crmv250/CRM_DE/BBLibrary/html/BBlibrary.htm -> C14: CRM E-Commerce.
Regards
Gregor

SAP EPM Addin for Excel 10 - SAP BW (INA-Provider) connection

Hello,
We are trying to connect with the EPM Excel Addin 10 on our SAP BW on HANA 7.4 SP7. We are trying to use the SAP BW (INA-Provider) connection as described in documentation. There is a screen where you could choose the SAP GUI connection and you have to fill in the port number and client. We are using HTTP protocoll.
But the connection doesnt work. We are facing the following error message:
Http #2: Unable to connect to the remote server:
There is one special thing in our SAP GUI. We have a router string for the connection. And I think there are some problems with BO tools and such connections.
Does enybody has some expierence with this connection?
Best regards
Nils

Hi,
We have definitely heard your frustration, and Microsoft understands the position our customers are in and we are actively working to find a solution besides a FixIt that can be deployed to remedy the issue.
We can also remove the MS14-082 Microsoft Office Security Updates for December 2014 by temporary bypassing this issue.
If we have any update, I'll post in this forum and you can focus
this blog
============
Update,
Hotfixes for this issue have been released in the March 2015 Updates for Office 2007, 2010 & 2013.
http://blogs.technet.com/b/the_microsoft_excel_support_team_blog/archive/2014/12/13/forms-controls-stop-working-after-december-2014-updates-.aspx
Thanks for your understanding.
Regards,
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

SAP Database is not connecting

Hi,
When i tried to connect SAP thru GUI i am getting below message
sap system message : no connection to databse session terminated
please help me out
Advance Thanks
Raj

Your database is not running.
Check your Oracle alert<SID>.log file for possible errors.
Markus

While updating the older version iTunes to latest one it shows "a network error occurred while attempting to read from the file: C:\windows\installer\iTunes64.msi. pls help on this matter to connect my i5 to PC. Thanks in advance

while updating the older version iTunes to latest one it shows "a network error occurred while attempting to read from the file: C:\windows\installer\iTunes64.msi. pls help on this matter to connect my i5 to PC. Thanks in advance

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

I want to transfer an audiobook and a movie from my MacBook Pro to my iPhone 4S, and can't figure out how. I went to "Help" and it said after connecting the two devices I should "Click Apps," but I can't find anything labeled "Apps" to click. Help?!!

I want to transfer an audiobook and a movie from my MacBook Pro to my iPhone 4S, and can't figure out how. I went to "Help" and it said after connecting the two devices I should "Click Apps," but I can't find anything labeled "Apps" to click. Help?!!

If you have iTunes 11 on your Mac then you can enable the left-hand sidebar via option-command-S, that might make it easier to navigate.
Connect the phone to your Mac and select it on that left-hand sidebar, and on the right-hand side of the screen there should be a series of tabs which you can use to select what to sync to the phone. If it's an audiobook then it should appear on the Books tab for selecting/syncing, and films will be on the Movies tab. When you've got the audiobook on your phone you should get an Audiobooks option in the Music app (you might need to tap the '...' tab at the bottom of the Music app to see it).

TS1398 Help! MacBook won't connect to the Internet on my network. Never had an issue on other networks, other devices work fine, i.e. iPhone/iPad. Says it's connected. Plugged in Ethernet and tried other browser. Called ISP and all good on their end.

Help! MacBook won't connect to the Internet on my network. Never had an issue on other networks, other devices work fine, i.e. iPhone/iPad. Says it's connected. Plugged in Ethernet and tried other browser. Called ISP and all good on their end.

You can't change it - just try aagain.
https://discussions.apple.com/index.jspa
Where you find these options:
Notebooks
MacBook Pro
MacBook Air
iBook
MacBook
PowerBook

Help to troubleshoot a 3G connection.

Hello!
I need help to troubleshoot a 3G connection.
It's a CISCO2921/K9 with UC license and a 3G Interface.
I used the manual to make the configuration, step by step, I can send and receive SMS by 3G network, and connect, take a IP, DNS etc, but I don't able to ping or send and receive data with the 3G connection.
See the information:
show ip int br
Interface                  IP-Address      OK? Method Status                Protocol
Embedded-Service-Engine0/0 unassigned      YES NVRAM administratively down down
GigabitEthernet0/0         192.168.50.1    YES NVRAM up                    up
GigabitEthernet0/1         192.168.6.253   YES DHCP   up                    up
GigabitEthernet0/2         unassigned      YES NVRAM administratively down down
Cellular0/0/0              unassigned      YES NVRAM up                    up
Cellular0/0/1              unassigned      YES unset down                  down
Dialer1                    191.27.49.172   YES IPCP   up                    up
NVI0                       192.168.50.1    YES unset up                    up
I have a radio ISP connected on interface G0/1 and my internal network is connected in G0/0 on a Layer 3 Switch.
3G configuration:
chat-script hspa-R7 "" "AT!SCACT=1,1" TIMEOUT 60 "OK"
cellular 0/0/0 gsm profile create 1 zap.vivo.com.br PAP vivo vivo
interface Cellular0/0/0
ip address negotiated
ip nat outside
ip virtual-reassembly in
encapsulation slip
dialer persitent
dialer pool-member 1
async mode interactive
interface Dialer1
ip address negotiated
ip nat outside
ip virtual-reassembly in
encapsulation slip
dialer pool 1
dialer idle-timeout 0
dialer string hspa-R7
dialer persistent
dialer-group 99
ip nat inside source list 1 interface GigabitEthernet0/1 overload
ip nat inside source list 89 interface Cellular0/0/0 overload
ip nat inside source list 90 interface Dialer1 overload
access-list 1 permit any
access-list 89 permit any
access-list 90 permit any
ip route 0.0.0.0 0.0.0.0 Dialer1
ip route 0.0.0.0 0.0.0.0 192.168.6.1
access-list 1 permit any
access-list 89 permit any
access-list 90 permit any
line 0/0/0
exec-timeout 0 0
script dialer hspa-R7
modem InOut
no exec
transport input all
Dialer1 is up, line protocol is up (spoofing)
Hardware is Unknown
Internet address is 191.27.49.172/32
MTU 1500 bytes, BW 56 Kbit/sec, DLY 20000 usec,
     reliability 255/255, txload 1/255, rxload 1/255
Encapsulation SLIP, loopback not set
Keepalive set (10 sec)
DTR is pulsed for 1 seconds on reset
Interface is bound to Ce0/0/0
Last input never, output never, output hang never
Last clearing of "show interface" counters 00:15:57
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue: 0/40 (size/max)
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
     0 packets input, 0 bytes
     508 packets output, 41923 bytes
Bound to:
Cellular0/0/0 is up, line protocol is up
Hardware is QuadBand HSPA+R7/HSPA/UMTS QuadBand EDGE/GPRS and GPS for AT&T
Description: PrimaryWANDesc_
Internet address will be assigned dynamically by the network
MTU 1500 bytes, BW 5760 Kbit/sec, DLY 20000 usec,
     reliability 255/255, txload 1/255, rxload 1/255
Encapsulation SLIP, loopback not set
Keepalive not supported
Interface is bound to Di1 (Encapsulation SLIP)
Last input never, output never, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue: 0/10 (size/max)
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
     0 packets input, 0 bytes, 0 no buffer
     Received 0 broadcasts (0 IP multicasts)
     0 runts, 0 giants, 0 throttles
     0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
     508 packets output, 41923 bytes, 0 underruns
     0 output errors, 0 collisions, 0 interface resets
     0 unknown protocol drops
     0 output buffer failures, 0 output buffers swapped out
     0 carrier transitions
     DCD=up DSR=up DTR=up RTS=up CTS=up
Profile Information
====================
Profile password Encryption level: 7
Profile 1 = ACTIVE* **
PDP Type = IPv4
PDP address = 191.27.49.172
Access Point Name (APN) = zap.vivo.com.br
Authentication = PAP
Username: vivo
Password: 0870191E5D495746335B2E
   Primary DNS address = 187.100.246.254
   Secondary DNS address = 187.100.246.251
Profile 2 = INACTIVE
PDP Type = IPv4
Access Point Name (APN) = wap.cingular
Authentication = None
Username:
Password: 03
* - Default profile
Data Connection Information
===========================
Data Transmitted = 41923 bytes, Received = 0 bytes
Profile 1, Packet Session Status = ACTIVE
   IP address = 191.27.49.172
   Primary DNS address = 187.100.246.254
   Secondary DNS address = 187.100.246.251
   Negotiated QOS Parameters:
   Precedence = Normal Priority, Delay = Class 2
   Reliability = Unack GTP, LLC, Ack RLC, Protected data
   Peak = 256 kB/sec, Mean = 50000 kB/hr
   Traffic Class = Interactive
   Uplink Max = 11.5Mbps, Guaranteed = Subscribed
   Downlink Max = 42Mbps, Guaranteed = Subscribed
   Max SDU size = 1500 bytes
   SDU error ratio = 1E-4, BER = 1E-5
Profile 2, Packet Session Status = INACTIVE
   Inactivity Reason = Normal inactivate state
Profile 3, Packet Session Status = INACTIVE
   Inactivity Reason = Normal inactivate state
Profile 4, Packet Session Status = INACTIVE
   Inactivity Reason = Normal inactivate state
Profile 5, Packet Session Status = INACTIVE
   Inactivity Reason = Normal inactivate state
Profile 6, Packet Session Status = INACTIVE
   Inactivity Reason = Normal inactivate state
Profile 7, Packet Session Status = INACTIVE
   Inactivity Reason = Normal inactivate state
Profile 8, Packet Session Status = INACTIVE
   Inactivity Reason = Normal inactivate state
Profile 9, Packet Session Status = INACTIVE
   Inactivity Reason = Normal inactivate state
Profile 10, Packet Session Status = INACTIVE
   Inactivity Reason = Normal inactivate state
Profile 11, Packet Session Status = INACTIVE
   Inactivity Reason = Normal inactivate state
Profile 12, Packet Session Status = INACTIVE
   Inactivity Reason = Normal inactivate state
Profile 13, Packet Session Status = INACTIVE
   Inactivity Reason = Normal inactivate state
Profile 14, Packet Session Status = INACTIVE
   Inactivity Reason = Normal inactivate state
Profile 15, Packet Session Status = INACTIVE
   Inactivity Reason = Normal inactivate state
Profile 16, Packet Session Status = INACTIVE
   Inactivity Reason = Normal inactivate state
Network Information
===================
Current Service Status = Normal, Service Error = None
Current Service = Combined
Packet Service = HSPA+ (Attached)
Packet Session Status = Active
Current Roaming Status = Home
Network Selection Mode = Automatic
Country = BRA, Network = VIVO
Mobile Country Code (MCC) = 724
Mobile Network Code (MNC) = 23
Location Area Code (LAC) = 27135
Routing Area Code (RAC) = 4
Cell ID = 57743
Primary Scrambling Code = 115
PLMN Selection = Automatic
Registered PLMN = , Abbreviated =
Service Provider = VIVO
Radio Information
=================
Radio power mode = ON
Current Band = WCDMA 850, Channel Number = 4385
Current RSSI = -60 dBm
Band Selected = Auto
Number of nearby cells = 1
Cell 1
   Primary Scrambling Code = 0x73
   RSCP = -63 dBm, ECIO = -7 dBm
Modem Security Information
==========================
Card Holder Verification (CHV1) = Disabled
SIM Status = OK
SIM User Operation Required = None
Number of CHV1 Retries remaining = 3
Incoming Message Information
SMS stored in modem = 1
SMS archived since booting up = 0
Total SMS deleted since booting up = 0
Storage records allocated = 30
Storage records used = 1
Number of callbacks triggered by SMS = 0
Number of successful archive since booting up = 0
Number of failed archive since booting up = 0

Refer this URL for how to configure the modem through serial port
http://docs.sun.com:80/ab2/coll.47.11/SYSADV2/@Ab2PageView/17395?DwebQuery=modem+configuration&Ab2Lang=C&Ab2Enc=iso-8859-1
Thanks,
Senthilkumar
Developer Technical Support
Sun Microsystems, Inc.
http://www.sun.com/developers/support

Help SAP BI Datasource - DB Connect

Similar Messages

Maybe you are looking for