Help screens not working

Had to put Tiger back in after a failure on Leopard to make a good wireless connection, but now I have no help screens available at all. Is there any way to get them going short of putting it in again?

You don't provide enough information to tell why this is happening.
If you want to shoot in the dark, you can try resetting the Mac Help.
This can be done with OnyX via Maintenance > Reset > Mac Help. Be careful with this tool: Uncheck what you don't want to be done.
Or it can be done by hand. Dr. Smoke provides a walkthrough here.
Hope this helps,
--gregor

Similar Messages

  • After update.. i can not start the ipad, when i press agree in the terms ...it will freeze and the screen not working///help please

    after update.. i can not start the ipad, when i press agree in the terms ...it will freeze and the screen not working///help please

    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
     Cheers, Tom

  • WBS element field in transaction CS71-F4 help is not working in ECC 6.0

    Hii
    In SAP, while working in SAP 4.7, tcode cs71, WBS element is coming via F4 Help. But after upgradation to ECC 6.0 EHP 5, this F4 help is not working. I can enter value manually.but F4 help is not working.
    Please Help.

    Hi,
    You can do it manually too
    1.  Choose function group 'CSDI' via Transaction SE80.
    2.  Choose screen '0260'in the 'Screens' area and switch to change mode
    3.  Choose the 'Element list' tab index.
    4.  In this area, choose the 'Reference' tab index and enter the value
        'PRP' in the 'Search help' column in the line for field
        'RC29N-PSPNR'.
    5.  Save your change and regenerate the screen.
    6.  The correct input help for the WBS element is now available in the
        initial screen of Transaction CS71/72/73.
    I hope F4 helps works for "Existing WBS BOM's" in CS71 after this
    Refer to Note : 714824 as well , it has reverted back the changes done by note : 422265
    Regards
    Gaurav

  • LaserJet Pr0 200 color MFP M276nw Touch Screen not Working correctly

    Hello, I'm having an issue with a LaserJet Pr0 200 color MFP M276nw Touch Screen not Working correctly. I have followed the instructions to reset the printer, but now am unable to select 'English' as my language because every time I select the 'English' option 'Spanish' is selected. I am then given two options to select 'Si' or 'No' both of which can not be selected on the touch screen?
    Anybody know of a way round this?

    Hi @dnhowes ,
    I see that you are having issues with the touch screen not working correctly. I will do my best to help you.
    Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector) This ensures the printer is receiving full power and may help this situation.
    Was it the Nvram reset back to factory settings that you tried or a hard reset?
    Try selecting the option on the display a little higher above the icon to see if that helps. Some touch screens are finicky.
    I find that on the Lab printers when I am selecting different menus.
    If the issue continues, please call our technical support at 800-474-6836 for further assistance. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
    http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Lenovo A1 - Touch screen not working after digitizer replacemen​t

    After dropping my tablet and breaking the digitzer, I ordered a replacement digitzer from a company in China. (It took about a month to get it) After watching this video, I was able to install my new digitizer and it finally looked new again....well at least the screen!
    But.....when I powered up my tablet, the touch screen wasn't working..... I emailed back and forth with the company and they told me to install drive program, and send me a link to a site with a video, this site may have contained more than the video, but it was all in Chinese and I couldn't figure it out even with Google Translate. So I started researching. I thought I would try and load ICS on it, I thought, "Whats the worst thing that could happen?" it wasn't much more than a brick at this point anyways. 
    I found this website that let me through installing ICS on it. I had absolutly no expectations...but IT WORKED!!!! MY TOUCH SCREEN IS NOW WORKING!!!! I COULDN'T BELIEVE IT!!!
    When I was researching for this problem, there was absolutly no posts anywhere for "Touch screen not working after new digitizer". So I wanted to share my experience.

    Yea you are correct.....it must be a hardware problem. You must contact service centre of Lenovo and get help from there.
    You can say thank you by pressing the star left to my post IF I HELPED YOU

  • F1 help does not work in transaction SE80

    Hi Experts!
    A strange error occurred in our ECC 6.0 SR3 system (Windows 2003 SE 64 bit based, MaxDB 7.6.03.009). F1 help does not work in transaction SE80. Either nothing is shown when a keyword as SELECT is marked and F1 key is pressed, or a strange popup appears with title u201CABAP Keyword Documentationu201D and root u201CHit List of Index Searchu201D - [screenshot|http://i43.tinypic.com/aox7d.jpg]. No matter what I choose in the tree it always closes, no help is displayed and SAP GUI returns in the main screen in transaction SE80.
    I found this thread [Re: SAP F1 Help and SE80 issue|Re: SAP F1 Help and SE80 issue] but it did not help me. This is my system information:
    SAP PC VERSION INFORMATION: saplogon.exe
    MAIN MODULE INFORMATION:
       saplogon.exe
       SAP Logon за Windows
       Final Release 710
       7100.3.12.1042
       1046700
    SYSTEM INFORMATION:
       Operating system: Microsoft Windows XP 5.1 (2600) Service Pack 3
       Internet Explorer v. 7.0
    Application help works perfect - I checked the configuration in transaction SR13 too.
    Any ideas will be appreciated!
    Thanks!

    Hi Presu,
    As it is seen from my previous post SAP GUI version is 7.10 SP 12. I downloaded the last SP 13 and installed it. Now SAP GUI information looks like this:
    SAP PC VERSION INFORMATION: saplogon.exe
    MAIN MODULE INFORMATION:
       saplogon.exe
       SAP Logon за Windows
       Final Release 710
       7100.3.13.1045
       1063164
    The problem is not resolved.
    This happens from different workstations with different versions and sub-versions of SAP GUI, so the problem is not caused from the GUI I think. It happens using different logon users and in all SAP system cliens.
    Any other suggestions?
    Best regards,
    Pit

  • 8500 All in One - touch screen not working

    One minute the touch screen with all it's functions was working fine and then, bam (!), the touch screen stopped working and I can't even use the one/off switch to power the unit off - it does not respond.  Funny thing is that the printer is still working from my computer so I can still send a print job via the wireless.   With the touch screen not working I can't use any function from the unit itself (copy a hard copy, fax a hard copy) and if the unit runs out of paper I have to unplug it to reboot since I can't hit the 'enter' on the touch screen once I've reloaded. 
    Bottom line --- nothing from the unit itself works.  Has a printer fairy locked me out or does this sound like a hardware error?  Thanks for any help ...
    Linda T

    Excellent.  Let me know how round 2 treats you.  The sad demise could have been due to a couple of things...as a side question, is the climate where you live especially dry right now?  I may request that our testers recheck how well we handle a static shock on the product if it is dry where you live. 
    Regards, CF
    I work for HP and hope to make your day Sproutastic!

  • Print Screen not working for user but working for Administrator

    Satellite A100 Laptop Print Screen Not working for USER but is working for Administrator[ New ]
    09-14-2009 11:25 AM
    Hi I am new to this forum and am asking for your  help.  We are sharing a computer, the PrtSc key is working for the Administrator but not when we switch users.  We have tried everything that we can think of: From opening a the page(S) we want to paste to not opening the pages. My most common usage is to PrtSc and paste it into an email , but barring that we have tried opening a page in notes, documents, word etc . Nothing seems to work.  I do not get an error message , it just won't paste. Since we are not computer literate we are hoping you can help us with a solution .  Thanks in Advance .

    Jerry, that post you just answered was from nearly 4 1/2 years ago!  And that's the last time the OP was here.
    C.B.
    Toshiba Sat. C75D-B7260 Win 8.1 64 Bit--Toshiba Sat. L775D-S7132 Win 7 HP SP1 64 Bit and Win 10 PRO Technical Preview--Toshiba Sat. L305-S5921 Win Vista SP2 32 Bit

  • Ipod touch 32 GB touch screen not work

    32GB  ipod touch touch screen not work  WHAT TO DO SOME BODY HELP ME MY PHONE NUMBER 09880252978

    If your iPod is not dry, dry it before further use. To dry:
    How to fix a wet iPod or iPhone | eHow.com
    It recommends drying for seven days and changing rice every day.

  • Sony Vaio Pro 13.3 Touch: Touch screen not working

    Hi, The touch screen for my Sony Vaio Pro 13 Touch suddenly stopped working two days ago and I have no idea how to fix it. I didn't install anything new before it stopped working, and I tried to install all the new drivers on the VAIO update but it still didn't work. I thought it might be because of Windows so I updated to Windows 8.1 today and it still does not work. On the PC info it even says" Pen abd touch: No pen or touch input is available for this display". but this laptop is supposed to have touch capability and it has been working up until now. Please help! My model number is SVP13215CDB. Do I need to install or update my driver?

    Hi FlyingTortoise,
    Was there any changes prior to touch screen not working?  Like installing software or hardware?  If not, then try using windows system restore to restore back to a date that you know when it was working.  If that still does not resolve issue.  Then we may have to put the unit back to factory condition to eliminate software related before servicing the unit for hardware.
    Nick--

  • TOUCH SCREEN NOT WORKING XPERIA Z ,

    Hi all, can anybody help please, the touch screen is not working on daughters Xperia Z. Loads ok & can power off using the volume + key & power button & then turns on but touch screen still not working, It hasn't been dropped & no liquid spilt on it, only 2 months old. Can't download anything support etc from Sony as it asks to enter the password to open the phone which she can't do as the touch screen not working.Is there another way or does it need to go back to the comapny for repair. It is contarct with VirginThanks in advance

    Hi and welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
    I'm sorry to hear. If the touch does not work, it's not much that you can do on your own more than performing a software repair to exclude software related problems. This can be done via our program Update service:
    http://www.sonymobile.com/global-en/tools/update-service/
    Download and install SUS, follow the instructions that appear.
    Note that the personal data will be lost when performing this repair and if you cannot access the menu, you are unable to back up this data.
    If the problem persist, I suggest that you contact your local support team to get information about how you should proceed in this case:
    http://www.sonymobile.com/global-en/support/contact-us/contact-info/

  • PSE 10  and Adobe CS6: When running silent install help is not working afterwards

    Hello,
    I'm not sure if this is the correct forum. If not: Please help me find the correct one.
    I have a big issue with Adobe CS6 (and former versions like Photoshop Elements 10): When installing it from DVD running GUI everything is working fine afterwards. If I install e.g. Photoshop Elements 10 using "Silent Installation" help is not working afterwards. It states that it cannot locate the URL. I have not installed AIR and also do not plan to install it.
    I have 'played' a little around with Common Files\Adobe\helpcfg and help directory. Now at least I do not get an error message but still it's not the online help which opens in the browser but the web page that is defined as 'home'.
    The same I see now in Adobe CS6. I have e.g. packaged After Effects and Illustrator and when deploying it I'm not able to open help as well and I fear that this is the same issue.
    Has anyone deeper knowledge about how "helpcfg" is working? Any example files? Any other help appreciated as well.
    Kind regards
    János

    @hannilator Have you checked the exceptions folder contents for instructions on how to push to logged off computers? Here's what I get when I package CS6 (DesignWebPrem) and excude AIR/CHC:
    After you have deployed the package, separately install the products in the exception folder.
    IMPORTANT: Before you install the products in the exception folder, refer to the following Adobe Knowledgebase article for information on installing these products and configuring the settings correctly:
    http://www.adobe.com/go/aamee_exceptions
    NOTE: The installation commands provided below will work when the user is logged in to the client machine where the package is being deployed. For the scenario where the user is not logged in, prefix the following string to the command:
    sudo launchctl bsexec `ps auwwx |grep [l]oginwindow | awk '{ print $2 }'`
    As an example, here is the command to install "Adobe AIR" when the user is not logged in to the client machine (assuming Adobe AIR is part of the package):
    sudo launchctl bsexec `ps auwwx |grep [l]oginwindow | awk '{ print $2 }'` Adobe\ AIR\ Installer.app/Contents/MacOS/Adobe\ AIR\ Installer -silent
    ###################################### Command to install Adobe Dreamweaver Widget Browser ######################################
    Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer -silent -eulaAccepted -programMenu WidgetBrowser.air
    ###################################### Command to install AdobeHelp ######################################
    InstallAdobeHelp appVersion=4.0.244 appId=chc pubId=4875E02D9FB21EE389F73B8D1702B320485DF8CE.1 installerArg1=-silent installerArg2=-eulaAccepted installerArg3=AdobeHelp.air

  • IPhone 4 touch screen not working

    iPhone 4 touch screen not working properly. Sometimes it activates icon itself. After updating to iOS 6.12, it stop working totally.

    Good Morning S.GOPINADHAN,
    I understand your iPhone screen is black and you are not able to turn it on.  The article below will explain what to do when your iPhone is not responsive.  I'll also include instructions on how to back up your iPhone when you are able to turn it on.
    If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
    https://support.apple.com/en-us/HT201412
    iCloud: Back up your iOS device to iCloud
    https://support.apple.com/kb/PH12520?locale=en_US
    Regards,
    - Judy

  • The 'Content, index, search' section of my help is not working in Mozilla

    Dear All,
    The 'Content, index, search' section of my help is not working in Mozilla.
    I am using robo8 and mozilla 8. Any idea? please help...
    Regards,
    Jobin.

    Dear William,
    It is a webhelp
    It is working in all other browsers except Mozilla.
    It is a merged help...
    waiting for your reply..:)
    Regards,
    Jobin.

  • F4 help is not working in IAC Iview

    Hi,
    There is IAC iview for transaction PA61
    F4 help is not working for the iview
    it workes in backend SAP PA61
    kindly give any hints what can we check
    thanks in advance
    b

    Hi,
    This might be due to the JRE version of the browser. We faced such issue and the update of JRE version in the browser helps to get the pop-up of F4 help. Check in the internet broswser Tools -> Internet Option -> Advanced. Check whether the JRE applet is checked or not. it has to be checked. if it is checked and even if you dont get the F4 help, upgrade the JRE version.
    Thanks,
    Mahendran B.

Maybe you are looking for

  • Can't restore messages from iPhone 3GS to iPad mini

    Hello, I tried to transfer informations from my iPhone 3GS to my new iPad mini via iCloud backup with no success. Once restore is completed, some data is missing on the iPad, like messages SMS and images. I think it's normal that photos won't be rest

  • Table Centering

    How to I center the table? I put in this line into the table area <table style="margin: auto;" However the table leans towards the right. If I can get the table to fall evenly below the navigation bar that would help.  The lines in the table header c

  • Finance approved service entry date

    Hi Experts, We have an requirement, there is a Service entry sheet ( related to Service in SD ) created on suppose on 18/11/2011 and it is released for Finance approval. Suppose approver had approved it on 20/11/2011. Can we know in which table or Tc

  • IWork 09 welcome video's

    Hi, Just got iWork 09 family licence as my wife has now purchased an Mac Book. Started to set it up for her but started pages up and didn't selected to display the start up video every time. She'd really like to just get a squint at this to help her

  • Phone icon on the Eris suddenly different

    The 'phone' icon at the bottom of the main Eris screen is suddenly different. I'm not sure how to describe it, but it is an uneven rectangle and the ^ and the + symbols are scrunched unevenly closer to the middle. If I drag my finger across it, the o