HELP! Scroll does not work on pressario CQ60 touchpad.

Hi,
I know this has been covered before but I am very illiterate in this subject and need step by step instructions, please bear with me.
I have a Compaq Pressario CQ60-300EV, the scroll function on the touchpad stopped working very suddenly after only two months. Also when i type i often accidentally touch the touchpad, i have tried to turn this off but this does not work, the light colour does change.
I have read replies that say go into:
control panel-mouse-settings then change the horizontal whatever it is,
I don't appear to have anything under mouse that says horizontal.
Please help I'm desperate.
Thanks
Clarebear

Sorry, I have wasted your time. Woo hoo! Its fixed!
Thanks anyway, i would have clicked the Kudos star anyway.

Similar Messages

Two finger scrolling does not work on Synaptics touchpad + clicking problems in web browsers

Hello, Since yesterday, i have problems with my synaptics touchpad on my HP Elitebook 8570w.The two finger scrolling and scrolling at the edge of the pad does not work.Also in google Chrome, all the links open in a new tab and when i try to click the new tab, it closes (normally that is the action when i click it with the middle touchpad button) Even in the practice mode of the synaptics settings of the touchpad, the two finger scrolling and edge scrolling does not work. Both options are enabled in the settings. I already tried to roll back the driver and reinstall the driver, without any effect.I expect the problem is the touchpad or the buttons itself. Is there a way to test the buttons and touch pad? How can i solve this problem? please help me sincerely, Karel

I would try installing the Windows 8.1 (64-bit) Synaptics touchpad driver available in your sleekbook's web support download section before using compatibility mode. Try the available earlier versions if the current driver does not work for you.
If you still do not have positive results, then use compatibility mode (choose Windows 8) on all three Windows 8.1 synaptics touchpad drivers, starting with the most current one.
To use compatibility mode to install the driver softpaq just right click on the file and choose troubleshoot compatibility. Choose Windows 8 and run the installer.
The following video has a decent explanation, but the narrator does not get to the point for a bit. Skip forward to minute 4 and watch it from there.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Help viewer does not work after update to 10.4.4

Since updating to 10.4.4 my Help viewer does not work, and all of the troubleshooting fixes suggested in other threads have not had any success in resolving this. I've noted that when I go to Users>Library>Documentation>Help there is no mac.help file - can someone tell me if that means that I've lost the file altogether and need to reinstall it? I get to the first screen of the viewer, but the links from there don't work. Thanks for any help that you can provide!

Thanks for your suggestion. I downloaded OnyX and ran the cleaning function. After restarting, I opened Help and once again the first screen appeared fine. But again most of the links did not work, though those under the "What's New" heading did work. I might add that I had previously tried a variety of suggestions posted in another thread, which included deleting from the caches folder in Home>Library several files such as com.apple.helpui and help.plist in the Preferences folder. (As noted in my previous post this evening, I also created another user but that also did not have any effect.) Any other ideas? Thanks

Image display control scrolling does not work properly when zoomed in

I am using a ROI on an image in the image display control. When zooming into the image to fine-adjust the positioning of the ROI, the image scrolling does not work properly. As far as I understand, the image should scroll automatically when the ROI is leaving the visible area. However, the scrolling behaviour seems to depend on the origin of the Labview panel, not the origin of the image display control, which might require to move the ROI way out of the visible area before the scrolling takes place. In other words: the coordinate system of the image display control is shifted with respect to the true visible image area, depending on where you place it on the front panel. As a consequence, when clicking on a ROI which is in the visible area, but is outside of what Labview thinks is the visible area, it might immediately jump to the left border of the image, making the positioning of the ROI really difficult.
Has anyone noticed this behaviour, and what would be a reliable solution to avoid this?
Dirk

Hello,
no, I am not talking about the tools palette. Just place an image control with some image in it on a new VI front panel. Then, use the rectangle from the tools and select a ROI in the image. If you zoom in (using the magnification glass), and then grab the ROI and move it around, the image scroll with the ROI. So far, so good. If you now place the image control elsewhere on the panel, or add new control above it, resize the panel, etc. , this scrolling when moving the ROI will not work correctly if the origin (0,0) of the panel is far away from the image control.
I have attached a VI for simplicity (although there is hardly any code in it).
If you make a ROI and try to move it down, you will notice that scrolling starts if you move the mouse out to about 10cms below the image (depens on your screen, of course). After that, if you click on the ROI, the scroll bars and ROI might jump up to the upper end of the image. Imagine how annoying this is if you try to finely adjust the ROI position.
I think it is a bug in the implementation of the image display control.
Thanks,
Dirk
Attachments:
scrolling.vi ‏818 KB

Scrolling does not work in LR

I've been frustrated by this for a while now. When in LR (currently on version 4.2, but same thing happens in earlier versions too), scrolling does nothing. If i'm trying to scroll up or down a panel, nothing happens.
I'm on a Lenovo W701 running Win & 64bit. The scrolling does not work using either the track point or the touchpad.
The work properly in all other applications.
The pointer will change to an icon the represents scrolling while in LR, but nothing happens. Any thoughts or suggestions?
If there is any other information that you might need, let me know.
Thanks!
Quinn

What about a mouse? Does the wheel scroll?
Sent from phone.

Scroll does not work.

Hi,
Scroll does not works.
How can I fix it?
P.S Photoshop CC 2014.2.2
Thanks,
Max

I have discovered the solution and it involves an issue I suspected. After the restore of my old Time Machine Lion files to my new MBP running ML, the restore restored my computer back to Lion. After an install of ML, my computer worked perfectly except the fancy Scroll and zoom featured we all love from the trackpad. Ha already installed ML on other partitions and the trackpad worked perfectly on them. Even the guest login's trackpad worked perfectly but not the main admin account.
First thought was to create a new admin account and copy everything from the old admin to the new admin and then delete the old admin account. Hated the idea because all files had to be copied rather than moved.
So what was left to do. I had thought of deleting all the apple preferences from the library and replace them with the contents of the library on another partition in ML. First I deleted old preferences many of which were old Lion preferences. That didn't solve the issue.
I forgot that Lion and ML HIDE the user library so I was working on the wrong library. Discovered the Terminal command "chflags nohidden ~/Library" and I chose to reveal the user library on a ML partition.
Solution:
I booted into another ML partition. I guess that I could have booted into the new admin user account and changed the permissions to access the old admin users Library But I chose to boot
from another ML partition: copy ALL the com.apple. XXXXX.plist files and the folder BY Host. It has special hidden files. Other way is to copy the Preferences folder we'll say into the Desktop.
I then proceeded to delete ALL the com.apple…….plist files and the Host folder into the trash. Then I copied all the apple.com…plist files and the Host folder and then rebooted. And now my wonderful Trackpad works as mountain Lion intended it to work.
I'm leaving this solution because there's someone else in the MacWorld with the same issue.
Ted

Safari scrolling does not work in osx mavericks please solve this issue

safari scrolling does not work in osx mavericks please solve this issue

I know it is a limited topic, but could you provide a little more detail?

Two finger scrolling does not work on my MacBook (late 2008)

Two finger scrolling does not work on my MacBook (late 2008) with either the notebook trackpad or a b/t conected magic trackpad. Yes, I've set system preferences. Suspect a driver or s/w problem. Ideas?

Saw another post that hinted that you need to go to accessibility settings:
System Preferences > UniversalAccess > Mouse & Trackpad > Trackpad Options
Enable scrolling (and I enabled dragging while I was at it and it worked. Looks like wierd things can get set even if you don't mean it to.

MB Air two finger scroll does not work for a user but does for another

Hi
MB Air. 10.9.3.
Defective Trackpad was just replaced. Two finger scroll does not work for the main user. I made a test log in and two finger scroll works. I booted off an external drive and two finger scroll works.
I pulled all of the user preferences out, logged out and in and still does not work. Zapped PRAM. Checked all trackpad settings. No luck.
Tried this in Terminal:
defaults write -g com.apple.trackpad.scrollBehavior 2
Any ideas?

This sounds strange but check the settings in Settings>Accessability for the track pad. I belive your problem lies there not in Track Pad set up in Settings.

Just updated my laptop to itunes 10.5,the help feature does not work.also updated my ipad2 3g wifi 64gig to ios5, now none of my purchased apps are working?? please help?

I JUST UPDATED MY ITUNES TO ITUNES10.5 ON MY LAPTOP(WIN7)
THE HELP FEATURE DOES NOT WORK.
I ALSO UPDATED MY IPAD2 3G WIFI 64GIG TO IOS5 AND NOW NONE OF MY PURCHASED APPS WORK??????????

I have seen this before. You need to update the apps in your app store, and once they are updated, they will work again.

Horizontal Scroll does not work with Apple Magic Mouse

Horizontal Scroll does not work with Apple Magic Mouse as it does with other Adobe software such as Photoshop.

The system preferences window for the mouse has changed. The GUI elements are different.

HELP - BBM does not work on Playbook (Bridged)

Hi Folks,
Looked into other threads but all problems seem to be related to older versions.
I am new to the whole Blackberry Lifestyle.
Currently own, Playbook (wireless) and Torch 9860 for about two weeks - enjoying them independently.
ANY HELP would be appreciated.
Just tried the Bridge function but the BBM does not work.
It is funny cause my Playbook does get a notification for any BBM I receive, the remote works, the contacts can be seen on playbook but when I click on BBM notification it I get a message "Your Version of Blackberry Messenger is not compatible with Blackberry Bridge. Download the latest version of BBM to use it on your playbook.
I did what I normally do - googled it. Found out the specs and I do have all updated apps.
On my 9860 I have
7.1.0 System
Bridge 2.0.0.35
BBM 6.1.0.55
This is not linked to BES or anything - purely personal.
I have already restarted my phone and playbook with no luck.
I am new, so not sure of the difference between stuff like hard set, shutdown etc etc or other technical terms - so would appreciate if you assume that I am a complete dummy.

Hi playbookfun and welcome to the BlackBerry Support Community Forums!
Have you tried updating to the latest version of BBM™? If not, I would recommend trying that by going to www.blackbery.com/bbm from your BlackBerry® Browser.
Thanks.
-CptS
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Touch pad scroll does not work in firefox minefeild but works in firefox 3.7

Love Minefeild, but have notice that my touchpad scroll up and down does not work. This function works fine in Firefox 3.7 and other software. I am using the lastest nightly builds. Is there a solution?

Sounds like your scroll pad drivers need to be updated, but considering that Firefox 4 is months away from being released the new drivers might not be available yet. Check with your manufacturers website in the software / drivers downloads section for newer drivers.

Input Help (F4) does not work for Planning Functions in Web

Hi Gurus,
I am working in BI-Integrated Planning.
When I execute a planning function from web layout (through Web Application Designer), the "Input Help" does not work. When I give F4 it takes me to the initial planning layout screen from the planning function variable screen without any action being performed.
But the "Input Help" works fine when I have to select for the variable from the initial selection to open the planning layout.
Can anyone suggest me any fix for this...
Thanks!!!

Hi All,
Can somebody help me here what went wrong with indesign cc extension so that copy/paste does not work in input type element text
Regards,
Alam

Have just upgraded to Lion. In all applications a box now appears that encloses topics, etc on the screen. It is a problem as it also randomly moves around the screen. Have no idea what the purpose is and want to get rid of it. Scroll does not work.

Just upgraded to Lion. Scroll does not respond. Have tried altering preferences. Will not fix. In all applications, including this page, a box appears and seems to randomly move around the screen, resting wherever I begin to work. How can I turn this off and get scroll to work normally?

Have a look at System Preferences, Accessibility, VoiceOver.
(Command - F5).
charlie

HELP! Scroll does not work on pressario CQ60 touchpad.

Similar Messages

Maybe you are looking for