HELP! Second time...Some attributes of one or more of the files.

I allready post this question in the morning, but got no answer.
I want to know if someone have had this problem before.
Maibe I didn't explain myself well, please let me know if you understand what is the problem I am having. I really need to sove this, I have more than 60 hours of material allready captured and I can't start editing until I solve this problem. I am working with two G5s and I have the same error in both of them.
Here is the question again with some corrections to see if you guys undestand me:
I am batch capturing a HUGE project that I logged on FCP 4.5, I am now working with FCP5. I have captured arround 70 hours of material. In some cases I captured the clips but it shows the clip as if it was offline. When I try to reconect the media the following mesage shows up:
"Some attributes of one or more of the files you hace chosen do not match the attributes of the original. This may cause problems within the sequence that are dependent on them. The attributes that differed are the follows:
- Media start and end
Would you like to try to connect them again?"
What does this mean?
I do not have any sequence yet, am I going to have future problems with the sequence in the project?
PLEASE HELP!!!!!
Thanks a lot in advance.
Jorge

I haven't found an answer to this yet and wish I could give advice.
However, I'm looking for it. And if you find anything - we'd love to know.
I've got a very large progect - all the media was manually copied over (via the finder) to external lacie FW drives which were brought here to another satellite editing room. I recieve updated projects from the primary edit and relink the media - The audio files have tended to 'mismatch' when I reconnect the updates. And it appears this is increasing in frequency each time! (I relink to each new version of the project which is sent).
At this point it seems all the audio files bring up the same "File Attribute Mismatch" window. Only in certain sections of the sequence is the audio out of sync (to a variable degree +/- 5 to 7 frames).
This occours when I replicate the workflow on another machine.
This does NOT happen when I've sent the projects back to the original edit suite - which has the original media. The reconnection is fine.
So it appears this might be due to the media itself - and possibly when it was copied over.
But I can't yet figure out why this problem appears to be increasing, occouring with more audio files.
If anyone has any ideas to this - which sounds very similar to the original issue on this thread - we'd be obliged to reciprocate the help!
Cheers
G5 dual 2.3GHz power PC Mac OS X (10.4.6) FCP 5.0.4 / QT 7.1
12 G4 PowerBook (1Ghz) Mac OS X (10.4.1)

Similar Messages

Hi. I recently discovered my iMac not shutting down and stalls. Everything seems to disappear except my wallpaper. If I Then go to setting on my Dock the apple sign at the top appears for me to shutdown the second time. I asked one technician's what might

Hi. I recently discovered my iMac not shutting down and stalls. Everything seems to disappear except my wallpaper. If I Then go to setting on my Dock the apple sign at the top appears for me to shutdown the second time. I asked one technician’s what might be the problem. He said that maybe it is Flash Player that runs in the background and avoid the computer to shutdown. I uninstalled Flash Player and the problem was fixed. Now I can’t watch any YouTube videos. Is there something else I can do to use Flash Player again to avoid the shutdown problem?

If YouTube is your only worry, you could instruct it to use HTML5 in stead of Flash:https://www.youtube.com/html5
Be advised though that Flash is used for other web stuff too.

Issue on deployment: Solution Deployment : Missing one or more of the following attributes from the root node in solution .wsp: assembly '', type ''

Hi,
I have the following issue when deploying:
Solution Deployment : Missing one or more of the following attributes from the root node in solution .wsp: assembly '', type ''
The solution is a farm solution (was never sandbox) and it deploys fine.
It was updated several times with success. We did not see this issue until recently when we had some other issue (unrelated) and looked at the logs. The solution is updated without problem and updates are available for the user. But we can see this error
in the logs at the update time.
Any idea what might cause this?
Pop Anisia

Hi，
This error is wide meaning, as it can come from differences between SP versions, variables types used, bad manifest file, WebConfiguration ...
You can try to redeploy the solution.
retracted the solution,removed all the previous ref, removed dll from GAC and folder from 14\features and reset the iis, deploying it again.
Here are some similar issue post, you can use as a reference:
https://social.technet.microsoft.com/Forums/office/en-US/72ac9a02-3a51-48b8-9e36-3b24a2d4da74/missing-one-or-more-of-the-following-attributes-from-the-root-node-in-solution-alertbdcwsp?forum=sharepointgeneralprevious
https://social.technet.microsoft.com/Forums/office/en-US/331af288-5ba6-48a7-9e9d-ac4e4bc8f8fa/missing-one-or-more-of-the-following-attributes-from-the-root-node-in-solution-xxxwsp-assembly-?forum=sharepointdevelopmentprevious
In additional, you can check the ULS log (C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\LOGS) to get the detailed information.
I hope this helpful.
Best Regards，
Lisa Chen
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

BCM 2007 error: "To help prevent malicious code from running, one or more objects"

Recently we changed our e-mail accounts around to a new domain name. After this switch, BCM no longer allows adding, editing or any other manipulation of contact records. I get an error message saying "To help prevent malicious code from running, one
or more objects in this form were not loaded."
I have tried clearing the forms cache, uninstalling and reinstalling BCM and even adding the old e-mail address back into the Outlook profile and nothing works.
Is there something I have missed somewhere or am I looking at a complete reinstall of Outlook and BCM?
Jon

Hi Jon
Thank you for the update. It could be another Active X Component - BCM 2007 calls several of them
On thing you could do is run a Process Monitor Log to see if perhaps another component is Blocked. To do that try the following:
1. Close Outlook and as many other programs as possible
2. Download and Extract Process Monitor from here -
http://technet.microsoft.com/en-us/sysinternals/bb896645
3. Start Process Monitor
4. Start Outlook
5. Reproduce the error in BCM
6. Stop Process Monitor by going to the File menu and unchecking "Capture Events"
At this point you can try filtering by clicking the Filter Icon (the Funnel) on the menu bar. Click on the Left Drop down at the top of the Dialog and Select "Path"
For the second dropdown select "Contacts" and then filter on "ActiveX Compatibility" (without the quotes)
in my lab, every GUID under HKLM\SOFTWARE\Microsoft\Internet Explorer\ActiveX Compatibility came up with a result of "Name Not Found"
On your system, are there any are present (the Result Column will show "Success")?
If so, then I would check the Compatibility Flag for that one (Hint - if you right-click on an Entry you can select "Jump To" to open Regedit to that location)
- or -
If you would like for me to take a look at it, in Process Monitor Go to the File > Save Menu and save it as a .PML file. Then send it to me at cts-larrymei at live.com
Note - Please ZIP the file prior to sending it
Thanks!
Larry - MSFT
Larry Meinstein

TS3694 my phone has switched off for the second time this week, however when connecting to itunes the restore process wont complete. the error is 2006 however i have tried a number of USB cords, and none seem to be working.

my phone has switched off for the second time this week, however when connecting to itunes the restore process wont complete. the error is 2006 however i have tried a number of USB cords, and none seem to be working.
I am in the noerthern [parts of australia and accessing an apple store is not possiable for another month. this is my only soucrce or telecommunication. please help

This is what it says about error 2006
Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on)
If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software. If the errors persist on another computer and known-good USB cable, the device may need service.

Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information.

Hi there,
I use visual studio community 2013 to develop app for office. When I create app project using template and directly run it, it shows me this error: Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information.
Can anyone help? Thanks in advance.

Hi holm0104,
Did you add custom code into the project? Can you reproduce the issue in a new project without custom code?
If not, did you have issue when you create a normal web application?
Regards & Fei
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Coded UI -Unit Test Adapter threw exception: Unable to load one or more of the requested types

I am working on silver light bases share point application using visual studio 2012 with C#
While debugging coded ui tests with ui maps i am getting this error.
I have taken the solution developed by team member containing test methods and trying to debug/run the test methods which contain ui maps I am getting
Unit Test Adapter threw exception: Unable to load one or more of the requested types.Retrieve the loader exceptions property for more information.
When i exclude the tests that depend on ui maps and debug/run remaining test methods I am not getting this error and able to run/debug test methods successfully
But when I include the test methods related to ui maps and tried to debug i am getting this error.
Please help me in this.

Thanks for Fouad's help.
Hi usha.talasila,
>>Unit Test Adapter threw exception: Unable to load one or more of the requested types.Retrieve the loader exceptions property for more information.
Generally this error would be related to the references. Like Fouad's suggestion, you would check whether there are specific references in your test project, and then right click the reference->property, and then set the Copy Local =true.
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Office App Devlopment: Unable to load one or more of the requested types.

I'm receiving the following error with the default C# Office App for Word, Excel, Powerpoint, Project Task Pane
Error Code
Description
File
Line
Col
Project
1
Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information.
C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v12.0\SharePointTools\Microsoft.VisualStudio.SharePoint.targets
438
5
AppName
I'm using
Microsoft Visual Studio Community 2013
Version 12.0.31101.00 Update 4
Microsoft .NET Framework
Version 4.5.51641
Installed Version: Professional
LightSwitch for Visual Studio 2013   06177-004-0444002-02129
Microsoft LightSwitch for Visual Studio 2013
Team Explorer for Visual Studio 2013   06177-004-0444002-02129
Microsoft Team Explorer for Visual Studio 2013
Visual Basic 2013   06177-004-0444002-02129
Microsoft Visual Basic 2013
Visual C# 2013   06177-004-0444002-02129
Microsoft Visual C# 2013
Visual C++ 2013   06177-004-0444002-02129
Microsoft Visual C++ 2013
Visual F# 2013   06177-004-0444002-02129
Microsoft Visual F# 2013
Visual Studio 2013 Code Analysis Spell Checker   06177-004-0444002-02129
Microsoft® Visual Studio® 2013 Code Analysis Spell Checker
Portions of International CorrectSpell™ spelling correction system © 1993 by Lernout & Hauspie Speech Products N.V. All rights reserved.
The American Heritage® Dictionary of the English Language, Third Edition Copyright © 1992 Houghton Mifflin Company. Electronic version licensed from Lernout & Hauspie Speech Products N.V. All rights reserved.
Windows Phone SDK 8.0 - ENU   06177-004-0444002-02129
Windows Phone SDK 8.0 - ENU
Application Insights Tools for Visual Studio Package   1.0
Application Insights Tools for Visual Studio
ASP.NET and Web Tools   12.4.51016.0
Microsoft Web Developer Tools contains the following components:
Support for creating and opening ASP.NET web projects
Browser Link: A communication channel between Visual Studio and browsers
Editor extensions for HTML, CSS, and JavaScript
Page Inspector: Inspection tool for ASP.NET web projects
Scaffolding: A framework for building and running code generators
Server Explorer extensions for Microsoft Azure Websites
Web publishing: Extensions for publishing ASP.NET web projects to hosting providers, on-premises servers, or Microsoft Azure
ASP.NET Web Frameworks and Tools 2012.2   4.1.21001.0
For additional information, visit http://go.microsoft.com/fwlink/?LinkID=309563
ASP.NET Web Frameworks and Tools 2013   5.2.21010.0
For additional information, visit http://www.asp.net/
Common Azure Tools   1.3
Provides common services for use by Azure Mobile Services and Microsoft Azure Tools.
Microsoft Azure Mobile Services Tools   1.3
Microsoft Azure Mobile Services Tools
NuGet Package Manager   2.8.50926.663
NuGet Package Manager in Visual Studio. For more information about NuGet, visit http://docs.nuget.org/.
Office Developer Tools for Visual Studio 2013 ENU   12.0.31105
Microsoft Office Developer Tools for Visual Studio 2013 ENU
PowerShell Tools   1.3
Provides file classification services using PowerShell
PreEmptive Analytics Visualizer   1.2
Microsoft Visual Studio extension to visualize aggregated summaries from the PreEmptive Analytics product.
SQL Server Data Tools   12.0.41012.0
Microsoft SQL Server Data Tools
Windows Phone 8.1 SDK Integration   1.0
This package integrates the tools for the Windows Phone 8.1 SDK into the menus and controls of Visual Studio.
From looking at the build it looks like the web part is building correctly but the application isn't passing validation, I have no idea why since it is the default app, I've made Office Apps on previous machines without a problem.
Any help would be much appreciated and also let me know if I can give more info!

Hi mngfinney,
>> From looking at the build it looks like the web part is building correctly but the application isn't passing validation, I have no idea why since it is the default app, I've made Office Apps on previous machines without a problem.
I’m trying to reproduce your issue but failed.
Here is my steps:
#1 Install Microsoft Visual Studio Community 2013
#2 Install Microsoft Office Developer Tools for Visual Studio 2013
#3 Create a new Apps for Office project and rebuild
According your error message, the failed step is ValidatePackage, I suspect it is an environment issue, but I cannot identify the root cause basing on the information you post.
Have you tried to re-install the Visual Studio and Microsoft Office Developer Tools for Visual Studio 2013 or test it on another machine with Microsoft Visual Studio Community 2013?
Regards,
Jeffrey
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

SGEN: error: Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information.

Hi,
I appollogize if this post is off topic. I have problem wiht publish WebApp MVC.
I have website (MVC) with one Web reference. Build and run in VS working. But when I tried to publish to disk I get error:
SGEN: error: Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information.
I have VS2013 Profesional with all updates and Windows 8.1.
If I remove web reference then publishing working. Where can be a problem? Thanks.

@Marek Bober,
Thanks for sharing the solution back to here.
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

"one or more of the items in your selection contains Aperture albums that are not supported in iphoto".

I have some folders in iPhoto called 'Recovered Folder'. When I try to delete them I get this message: "one or more of the items in your selection contains Aperture albums that are not supported in iphoto".
I don't use Aperture (did install it to try it out), and have deleted Aperture App from my Mac.
How can I get rid of these fodlers?

i finally figured this out:
fyi, iphoto and aperture can now share (i.e., access) the same library. apple details it here:
http://support.apple.com/kb/HT5260?viewlocale=en_US&locale=en_US
i use both iphoto and aperture, and i suspect something went amiss, at some point, while aperture was accessing my iphoto library.
this is how i fixed the problem:
i launched aperture, then (per the instructions linked above) switched to (i.e., accessed) my iphoto library. i was then able to delete the "recovered folder" and the album it contained. i then quit aperture and relaunched iphoto.
NOTE: at that time, although i expected the "recovered folder" to be gone, it was still present. but this time, i was able to delete the folder from within iphoto without the "contains aperture items" error message.
(Sparky030405, i realize you've since deleted aperture. while i can't say my method is the *only* way to solve this problem, it's the way i was able to solve it. so, you might consider reinstalling aperture in order to delete the folder, then uninstalling aperture, once again.)

Service template problem - Unable to perform the job because one or more of the selected objects are locked by another job - ID 2606

Hello,
I’ve finally managed to deploy my first guest cluster with a shared VHDX using a service template.
So, I now want to try and update my service template. However, whenever I try to do anything with it, in the services section, I receive the error:
Unable to perform the job because one or more of the selected objects are locked by another job. To find out which job is locking the object, in the jobs view, group by status, and find the running or cancelling job for the object. ID 2606
Well I tried that and there doesn’t seem to be a job locking the object. Both the cluster nodes appear to be up and running, and I can’t see a problem with it at all. I tried running the following query in SQL:
SELECT * FROM [VirtualManagerDB].[dbo].[tbl_VMM_Lock] where TaskID='Task_GUID'
but all this gives me is an error that says - conversion failed when converting from a character string to uniqueidentifier msg 8169, level 16, State 2, Line 1
I'm no SQL expert as you can probably tell, but I'd prefer not to deploy another service template in case this issue occurs again.
Can anyone help?

No one else had this?

One or more of the updates requested by Final Cut Server could not be...

We are getting the warning " One or more of the updates requested by Final Cut Server could not be applied. (one or more replacement file(s) had unexpected track settings.)" when a FCPv6.06 (possibly also FCPv7.0) project file is checked-out of Final Cut Server v1.5.1. The assets linked to the project are cached down successfully (this in not an XSAN environment) but opening the project alerts to some offline media files (not all) and we need to manually relink them to the assets in the Final Cut Server cache. All is good again until the project file is checked-out of FCSvr to another workstation.
Having a look at the path of the offline files it is referencing the path of the assets as they were on the previous editor's (different) workstation. None of our workstations have the same path to the Final Cut Server cache.
My understanding and experience is that FCSvr manages the paths for FCP linked assets and modifies the checked-out file's path to point to the workstation's FCSvr cache?
Can you tell me how I can resolve this issue?

I may have resolved this issue today or I'm at a stage where I can't replicate it. The problem may have been propagating from a within a template FCP project file we use to start our productions. I assume it was a corruption of the FCP file that FCSvr didn't recognise?

My hard drive fried and had to be replaced. I'm trying to install CS4 from my original discs but keep getting this error message - "One or more of the required components of Adobe Creative Suite 4 Design Standard failed to install correctly". A customer s

My hard drive fried and had to be replaced. I'm trying to install CS4 from my original discs but keep getting this error message - "One or more of the required components of Adobe Creative Suite 4 Design Standard failed to install correctly". A customer service rep gave me a link to download off the Adobe site, but when I try to open the file to run it, I get this error message - "A problem occurred extracting the archive".
Can anyone help?

Yep. Nothing happens at all. Windows tries to execute the uninstaller, but I don't get any other screen and all activity stops for the MSI. I monitored it in Process Monitor and the MSI executable appears, but is quickly ended, like it couldn't find anything or something.
It's as if windows has a blank entry in Programs and Features, because it used to show the size of the Adobe application in the "Size" column. Now it's just blank. Link to screenshot below:
http://img829.imageshack.us/img829/5006/screenshotcaf.jpg
Note the install date. That's when I was able to successfully reinstall it. Now I can't even do that. I should also mention I tried Revo Uninstaller. It deleted one small registry key, but nothing changed.
By the way, is the CS cleaner supposed to ask for a disc in the drive when you run it? It refused to run unless I had one in it, so I used my install dvd.

Why I cant view my picture on my iphoto and if I try to copy to any folder it Shows "The item on the clipboard cant be pasted to this location. (One or more of the item may have been deleted or are no longer available) "

Why I cant view my picture on my iphoto and if I try to copy to any folder it Shows "The item on the clipboard cant be pasted to this location. (One or more of the item may have been deleted or are no longer available) "

There are 9 different versions of iPhoto and they run on 9 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
- What version of iPhoto.
- What version of the Operating System.
- Details. Describe the problem as fully as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have.

One or more of the specified resources could not be re-assigned. This can happen if the proposed resource to be assigned has already an assignment on the given task or the specified assignment is deleted or rejected.

I create a brand new plan based on a template.
A task in that plan has a team resource assigned. the task is fixed work. The PM may change the work and duration but not the team resource.
The plan is published.
I delegate my self as a team resource: and try add myself to team task in the timesheet area (using insert row). I can choose some tasks and the add. Most tasks throw this error. This happens if nothing on the plan is changed - it is brand new - minutes
old
One or more of the specified resources could not be re-assigned. This can happen if the proposed resource to be assigned has already an assignment on the given task or the specified assignment is deleted or rejected.
How can I stop the alert:
One or more of the specified resources could not be re-assigned. This can happen if the proposed resource to be assigned has already an assignment on the given task or the specified assignment is deleted or rejected.
Trying to stop the swap to Salesforce - but the errors keep a coming

oooch - I can fix it - I need delete the task and recreate it. Which is amazingly tedious as I cannot see if a task needs recreating or not. There's 10 template plans and an average of 200 tasks - then I have to rename the template - the assign the
new template to the EPT - this will be a long night; with only complaints at the end.
Trying to stop the swap to Salesforce - but the errors keep a coming

HELP! Second time...Some attributes of one or more of the files.

Similar Messages

Maybe you are looking for