Help! Serious DNG problem!

I shoot and edit professionally--use Bridge, PS, LightRoom (experimentally), etc, etc, and I do not normally convert to DNG or use it.
A client sent 120 DNGs made from scanned images (so called "RAW" scans). I opened them with Bridge and much to my surprise all the images were in need of horizontal flipping--many had signs and wording in them, all backward--X&^$!!!!. This client is now in the far reaches of Indonesia! Can't contact him for originals. Deadline looming!
If there is a way to horizonatally flip a DNG without having first to save it as a Tiff? If there is a way to do that in LR or Bridge of PSCS2 or 3, I cannot find it!
Can anyone offer a quicker way to do this--these files average 150 megs each. They can Not be be bulk loaded. When I open one in PS, it opens in ACR, then has to be Opened in PS, then saved as Tiff, then reconverted to DNG.
I knew there were good reasons not to deal with DNGs personally, but this one was not on the list. Someone, please call me a moron and indicate how that can be done, what I have missed. Any app or utility that will do that?

Don,
Duhhhhh!
How could I have missed that! I am a blind moron! Panic striken eyes never see what is right in front of them!!! :) :) :)
Thanks, you and LR saved my bacon! I can write the flip back to DNG with the Export Metadata command and send them on to the guy's publisher image edited and ready for the next step. He insists they come in as DNGs and go out as DNGs--and this is the first time he sent them needing flipping. A BIG lesson learned! Thanks again.

Similar Messages

Help - serious internet problems

I have installed Adobe 9 but it seems to be causing me horrendous problems with the internet. I can connect to my chosen home web page but when I try to go to another web page the whole thing just freezes. This has happened several times over the past week and each time I deinstall Adobe 9 the problem rectifies itself. The problem is that when I try to access pdf documents or images, the whole thing wants to upgrade me again so I am going round and round in circles. Can anyone please advise me what is happening here?

More weird results.
It turns out CAN access this forum from Safari browser, but it takes a VERY long time to load.
I tried our iPad. I can access this forum fine and it loads right away using same WiFi as laptops?!
I still can't access gmail.com from Macs or iPad, but can access it just fine from iPhone (via AT&T, not home network.) Errors: Opera says "Session closed by remote server". Safari on iPad says " server stopped responding". Safari on Macs says "can't open ... because server isn't responding"
MOST urls load fine and super fast. Only a few don't load at all (e.g: gmail.com) via home network. Others load fine on iPad on home network but VERY slow on Macs (e.g. this forum)?! Everything seems to work fine from iPhone using AT&T network.
I'm really confused?!

Serious display problem. Please help!

I'm having a serious display problem all of a sudden. It is not application specific. Various different applications are pixelating, especially wherever I move my cursor and click the mouse. When I grab the entire application with the cursor and move it, the image duplicates into hundreds of images all over my screen. If I shake it around awhile, eventually it goes back to normal. What is going on??!!
Here's some background info: I'm on a 2009 Mac Pro. I still use the old fashioned tube monitors with mini display port to VGA converters, but I've never had a problem up until now. Just before the problem started happening, I tried to open up some .jpg files in Quicktime Pro 7.
I would greatly appreciate any ideas of what the problem could be and how to fix it.

Welcome to Apple Discussions!
Might you have moved the Home folder or its contents, or renamed it? If you think that's what happened, this article may help:
http://docs.info.apple.com/article.html?artnum=107854

Serious performance problems on iWeb site

Can anyone help me find the problem with peterlance.com? It looks like author Peter Lance uses iWeb to update his web site. He redesigned it recently (and did not use iWeb for the old design). Anyway, it has serious performance problems on Internet Explorer, which I was hoping you guys could help pinpoint? Is there something simple I can tell him to try to fix the problem? He is launching a new book on Tuesday so he will be getting a lot of traffic, but for now the response time is not very good. Any suggestions?
In particular, each new page seems to hang for about ten seconds and freeze using Internet Explorer 6. Any fixes?
I mean, fixes other than: "Don't use Internet Explorer!"
http://www.peterlance.com/Peter%20Lance/Home/Home.html
name="Generator" content="iWeb 1.1.2"

Welcome to the discussions, TopDog08.
There are several plain .jpg's and that's good, but you need to convert every .png on the page (or as many .png's as you can) to a .jpg. For example,
http://www.peterlance.com/Peter%20Lance/Home/Homefiles/shapeimage46.png
Convert that to a jpg, then replace the graphic and text on the iWeb page with this converted jpg (some have has success using Downsize http://www.stuntsoftware.com/Downsize/)
The ones you won't be able to do anything about are the ones that are a part of the blog, but that will be only 5 images instead of the many you have now.
This image
http://www.peterlance.com/Peter%20Lance/Home/Homefiles/shapeimage50.png
Is covering part of your menu which is why it appears that only the top half is sensitive to rolling over. You'll have to adjust your layout to account for this.
Another area to look at, there are white boxed png's surrounding the amazon book covers at the top.
http://www.peterlance.com/Peter%20Lance/Home/Homefiles/imageEffectsAboveAli%20Mug%20TPI%20jpg.png
Another set of .png's you'll have to get rid of. How did those get put on the page?
What you see happening with IE is a java script running to fix IE's problem with png's. The fewer .png's you have, the less of a problem with IE you have.

Serious performance problems

Hi
I am having some very serious performance problems witgh java web start. I have a swing client that transmits XML/HTTP to and from a server, parses it, etc... I am finding that the XML/HTTP data request
is a factor of 10 to 100X slower, at least, using Java Web Start than without.
Any suggestions would be helpful
Thanks
Charles

Charles,
I've also observed some overhead when running an application deployed with JAWS compared to running the application from the jar, or in my dev environment.
After searching these forums a bit, I found this buried nugget of info: Try System.setSecurityManager(null) if you are requesting <all-permissions/> already.
Before the workaround, my application was taking 194 seconds for a single analysis run. After this workaround was applied, the same analysis run took only 82 seconds.
So as you can see, there is considerable overhead associated with performing operations through the layers of security (my guess). My particular application does a lot of disk I/O (which is probably something the security manager watches closely).
I stress the 'workaround' aspect of this because I haven't fully investigated the ramifications of using it, but eventually this might turn into a bug submission (because if I'm already requesting all-permissions, why do I still need to do setSecurityManager(null)?).
At any rate, hope this helps!
-jw

Serious System Problems. Pictures and Documents folders are opening iPhoto when clicked. iPhoto Library gone.

I have been speaking to Old Toad for the majority of today trying to fix my iPhoto Library as its become corrupt and I cannot get my photos/videos back into iPhoto. After many many suggestions I seem to have created some serious system problems.
PLEASE READ ALL OF THIS THREAD...
https://discussions.apple.com/message/21742033#21742033
If anybody can be of assisatance that would be a great help.
I am a mac dummie, recently transfered so foolproof guidance will be helpfull!
(Unfortunatly.. and now I know the importance, I haven't used time-machine and my mac isn't backed up. If i restore to factory settings I will loose the 600+ photos and videos I had in my iPhoto Library.... which dissapeared, which is the whole reason why I created the first thread)
Thank you!!

Linc:
It appeared to me that somehow the OP's Picture folder was converted into an iPhoto Library as his screenshot of the PIctures folder looked like the inside of a library.
This statement by the OP make me think it might be more than just an iPhoto issue (the bold text):
I am unable to drag the Picture folder to the desktop, It wont move, and iPhoto (which is still empty) just opens.
Some how the same is happening with Documents,
OT

Sir since update of ios 8.1.2 i got serious battery problem on 3g 4.30 hrs my battery gets low and sometimes serious net probelms please give an update for this issue its not alone me my friends too getting many problem lcommonly battery problem

sir since update of ios 8.1.2 i got serious battery problem on 3g 4.30 hrs my battery gets low and sometimes serious net probelms please give an update for this issue its not alone me my friends too getting many problem commonly battery problem please can this be resolved
its not related to any hardware because last year april i got replacement new phone from apple and i maintained it well...!

Probably apps running in the background are causing this, sometimes Mail get's stuck connecting to the mail server, or some social media app like Facebook can also be a reason for prolonged background activity.
Try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again. You will not lose any data by resetting, but it can cure some glitches.
If this does not help, setting it up as new device would be the next step:
How to erase your iOS device and then set it up as a new device or restore it from backups
Also take a look at these tips to prolong the battery life again:
http://www.overthought.org/blog/2014/the-ultimate-guide-to-solving-ios-battery-d rain

Serious BlueTooth problem

Hi,
I'm the (mostly) happy owner of an iPhone 3Gs, and an Apple BT headset.
My problem is that I can't stay connected to my headset, on totally random occations, I simply lose connection. Sometimes when the phone rings, sometimes when I open an app. I have no problems connecting and pairing, and even bought the original Apple headset 'cause I figured that my old one ( a Samsung headset ) was causing this problem. But it did not help what-so-ever, same problem persists. I have latest firmware all around (3.1 and latest iTunes and all) I have tried deleting apps that were using BT just in case. Nothing helps, and this problem is making me consider going back to WM, since I, for several years have had no problems with BT overthere...
This is a serious issue for me, since I spend a lot of time in car, and way too often cannot answer using my headset, or simply lose connection with no apparent reason at all. I have tried to contact Apple support, but since I live in Denmark, they tell me that it's my provider doing the support, but for crying out loud, they don't know anything, so no help there
Please someone, tell me that I can do something about this, since it's ruining my otherwise happy relationship with my phone :oP

Hi Thanar, thanks for your response
Actually, the Apple headset is the most reliable of the ones that I've got. My Samsung headset is BT 2.0 as a matter of fact, but it loses connection faster than I can push the button...The Apple headset works mostly, and I have found a couple of workarounds to make it a little more reliable ( or so I'd like to think ). I found out that when I just disconnect, either by switching off the headset, or leave it in the car and walk away from the connection, I have all sorts of trouble reconnecting..But, if I switch off the Bluetooth on the phone first, it seems easier to reconnect. And there are times, where it works nicely for hours, but then all of a sudden, again with no apparent reason, it loses connection but atleast, the Apple headset warns me ( gives a bip ) when it loses connection, so I guess I can live with that. What I have a hard living with, is the random disconnection when I'm trying to answer an incoming call, and even sometimes when I make a call. My guess is that this is a radio-stack problem, and it might even be hardware related ( on the iPhone ) So my problem persists 'till Apple works it out...whenever that'll be :oP
In addition to all this, I would like to say that it strikes me how hard it is to get in touch with Apple, IMHO that's just not good enough, considering the price-tag on this phone, the support is like non-existing, what a minus

Need help with getResource() problem under weblogic 6.1

Hey all,
          I've got a serious problem that I can't figure out. This should be really
          simple - but it's alluding me. I have an ear file with a number of servlets
          inside it. This ear file also contains a resource that my servlets want to
          read from. This resource is located (within the ear file) at:
          "/content/structure/a.txt". The file contains raw ascii.
          To have my serlvet read from this file, I thought it would be as simple as:
          URL content =
          servlet.getServletContext().getResource("/content/structure/a.txt");
          // pw is an instance of PrintWriter
          pw.print(content.getContent());
          However, when I execute the above I get the following exception:
          java.lang.NullPointerException
          at
          java.net.URLConnection.stripOffParameters(URLConnection.java:1011)
          at java.net.URLConnection.getContentHandler(URLConnection.java:979)
          at java.net.URLConnection.getContent(URLConnection.java:581)
          OK, so fine - I figure that I'm new to this. The documentation for the URL
          class tells me there is another way around this. It says that rather then
          calling getContent() directly, I can open a stream on the URL and read from
          that, like so:
          URL content =
          servlet.getServletContext().getResource("/content/structure/scenario2resourc
          es.txt");
          FileInputStream fis = content.openStream();
          but when I do this I get the following different exception:
          java.lang.ClassCastException: weblogic.utils.zip.SafeZipFileInputStream^M
          at Utility.writeFileToOutput(Utility.java:134)^M
          Apparently this thing is trying to return a web-logic-specific stream (which
          is incompatible with an FileInputStream) - which I don't want to use or
          learn about since I want my stuff to work under other webservers.
          Can anyone tell me what I'm doing wrong? This should be simple.
          -john
          John Hilgedick
          WisdomTools, Inc.
          [email protected]


Wenjin,
          I appreciate your response. I tried treating it as a normal InputStream -
          but it didn't make any difference. Here's what I did:
          URL content =
          servlet.getServletContext().getResource("/content/structure/scenario2resourc
          es.txt");
          InputStream is = (InputStream)content.getContent();
          And here's the exception:
          java.lang.NullPointerException^M
          at
          java.net.URLConnection.stripOffParameters(URLConnection.java:1011)^M
          at
          java.net.URLConnection.getContentHandler(URLConnection.java:979)^M
          at java.net.URLConnection.getContent(URLConnection.java:554)^M
          at java.net.URL.getContent(URL.java:807)^M
          at Utility.writeFileToOutput(Utility.java:134)^M
          You can see that it is definitely breaking somewhere in getContent().
          If you have any other ideas, I'd appreciate hearing about them.
          -john
          ----- Original Message -----
          From: "Wenjin Zhang" <[email protected]>
          Newsgroups: weblogic.developer.interest.servlet
          Sent: Wednesday, November 20, 2002 5:03 PM
          Subject: Re: Need help with getResource() problem under weblogic 6.1
          >
          > The "/" in getServletContext().getResource("/content/structure/a.txt")
          means the
          > web (WAR) application root, not your EAR root.
          >
          > The ClassCastException is because that content.openStream() is not
          FileInputStream
          > and has nothing to do with Weblogic. You should treat it as normal
          InputStream.
          >
          >
          > "John Hilgedick" <[email protected]> wrote:
          > >Hey all,
          > >
          > >I've got a serious problem that I can't figure out. This should be
          really
          > >simple - but it's alluding me. I have an ear file with a number of
          servlets
          > >inside it. This ear file also contains a resource that my servlets want
          > >to
          > >read from. This resource is located (within the ear file) at:
          > >"/content/structure/a.txt". The file contains raw ascii.
          > >
          > >To have my serlvet read from this file, I thought it would be as simple
          > >as:
          > >
          > >URL content =
          > >servlet.getServletContext().getResource("/content/structure/a.txt");
          > >// pw is an instance of PrintWriter
          > >pw.print(content.getContent());
          > >
          > >However, when I execute the above I get the following exception:
          > >
          > >java.lang.NullPointerException
          > > at
          > >java.net.URLConnection.stripOffParameters(URLConnection.java:1011)
          > > at
          java.net.URLConnection.getContentHandler(URLConnection.java:979)
          > > at java.net.URLConnection.getContent(URLConnection.java:581)
          > >
          > >OK, so fine - I figure that I'm new to this. The documentation for the
          > >URL
          > >class tells me there is another way around this. It says that rather
          > >then
          > >calling getContent() directly, I can open a stream on the URL and read
          > >from
          > >that, like so:
          > >
          > >URL content =
          >
          >servlet.getServletContext().getResource("/content/structure/scenario2resour
          c
          > >es.txt");
          > >FileInputStream fis = content.openStream();
          > >
          > >but when I do this I get the following different exception:
          > >
          > >java.lang.ClassCastException: weblogic.utils.zip.SafeZipFileInputStream^M
          > > at Utility.writeFileToOutput(Utility.java:134)^M
          > >
          > >Apparently this thing is trying to return a web-logic-specific stream
          > >(which
          > >is incompatible with an FileInputStream) - which I don't want to use
          > >or
          > >learn about since I want my stuff to work under other webservers.
          > >
          > >Can anyone tell me what I'm doing wrong? This should be simple.
          > >
          > >-john
          > >
          > >
          > >--
          > >John Hilgedick
          > >WisdomTools, Inc.
          > >[email protected]
          > >
          > >
          >

My Itunes is no longer allowing me to manage my music on my phone i can no longer select on my iphone to make playlists and delete music. Please help fix my problem.

My Itunes is no longer allowing me to manage my music on my phone i can no longer select on my iphone to make playlists and delete music. Please help fix my problem. Iphone4s, 32gigs, IOS 7.1.2
I don't know why it stopped working but it happened a month or two ago but the option on this phone that's usually all the way to the left when you select your device but now its not and I don't know what caused it. ive already tried troubleshooting my problem but have found no help.

Hello Salmomma,
Thank you for the details of the issue you are experiencing when trying to connect your iPhone to your Mac. I recommend following the steps in the tutorial below for an issue like this:
iPhone not appearing in iTunes
http://www.apple.com/support/iphone/assistant/itunes/
Additionally, you can delete music directly from the iPhone by swiping the song:
Delete a song from iPhone: In Songs, swipe the song, then tap Delete.
iPhone User Guide
http://manuals.info.apple.com/MANUALS/1000/MA1658/en_US/iphone_ios6_user_guide.p df
Thank you for using Apple Support Communities.
Best,
Sheila M.

I need advise and help with this problem . First , I have been with Mac for many years ( 14 to be exact ) I do have some knowledge and understanding of Apple product . At the present time I'm having lots of problems with the router so I was looking in to

I need advise and help with this problem .
First , I have been with Mac for many years ( 14 to be exact ) I do have some knowledge and understanding of Apple product .
At the present time I'm having lots of problems with the router so I was looking in to some info , and come across one web site regarding : port forwarding , IP addresses .
In my frustration , amongst lots of open web pages tutorials and other useless information , I come across innocent looking link and software to installed called Genieo , which suppose to help with any router .
Software ask for permission to install , and about 30 % in , my instinct was telling me , there is something not right . I stop installation . Delete everything , look for any
trace in Spotlight , Library . Nothing could be find .
Now , every time I open Safari , Firefox or Chrome , it will open in my home page , but when I start looking for something in steed of Google page , there is
''search.genieo.com'' page acting like a Google . I try again to get raid of this but I can not find solution .
With more research , again using genieo.com search eng. there is lots of articles and warnings . From that I learn do not use uninstall software , because doing this will install more things where it come from.
I do have AppleCare support but its to late to phone them , so maybe there some people with knowledge , how to get this of my computer
Any help is welcome , English is my learned language , you may notice this , so I'm not that quick with the respond

Genieo definitely doesn't help with your router. It's just adware, and has no benefit to you at all. They scammed you so that they could display their ads on your computer.
To remove it, see:
http://www.thesafemac.com/arg-genieo/
Do not use the Genieo uninstaller!

How do I copy files onto a hard drive (device) from Mac 2 7 pc. I'm able to transfer files from device but cannot transfer files to device. Anyone had same problem or can help solve this problem? Help pls

how do I copy files onto a hard drive (device) from Mac 2 7 pc. I'm able to transfer files from device but cannot transfer files to device. Anyone had same problem or can help solve this problem? Help pls

Welcome to Apple Support Communities
When you try to copy data to the external drive, what happens? If you don't see any error, the external drive is formatted in NTFS, and OS X can't write in it.
To be able to write on this external drive, you have to use an app like Paragon NTFS. Another solution would be to format the external drive in FAT32 or exFAT with Disk Utility > http://pondini.org/OSX/DU1.html Make sure you copied all the files of the external disk to the internal disk before doing it

Serious performance problems after updating from 10.5.6 to 10.5.7

I've got a Macbook Pro C2D 15" (late 2006). After updating the system from 10.5.6 to 10.5.7 and quicktime to 7.6.2, I experience serious performance problems which I have never seen before:
-From time to time, kernel_task has peaks in activity monitor (consumes a lot of CPU). In that moment, the mouse hangs for a short moment and audio playback is distorted/has drop outs.
-Recording audio consumes a lot of CPU (independent of the audio application).
-Video playback consumes a lot of CPU, regardless if I use VLC or the quicktime player.
Any idea what could be done? Thanks in advance.

After a few days of using CoolBook I report that my 1st generation MacBook Air is now reliable and never overheating, regardless of environment conditions.
I must point out that I do believe that it really is something new in 10.5.7 that is causing this problem as my environmental conditions have not changed and even Summer in Dublin still sees temperatures no more than 72F/22C. I am now in Madrid, where the environment is quite different, and I am still having no problem with kernel_task spinning.
I plan on reporting my problem to Apple anyway and being aggressive about the issue as MacLovinRanga did in this thread (http://discussions.apple.com/thread.jspa?messageID=9647353#9647353). Perhaps many/all of those of us having this problem will obtain new MacBook Airs.
Joe Kiniry

I'm new to Mac and I have a Mac Mini. Could you please tell me how I could paste an URL to a video downloader like "Coolmuster Video Downloader for Mac"? I can copy the url but I could not paste it on the downloader. I appreciate your help to my problem.

I'm new to Mac and I have a Mac Mini. Could you please tell me how I could paste an URL to a video downloader like "Coolmuster Video Downloader for Mac"? I can copy the url but I could not paste it on the downloader. I appreciate your help to my problem.

Is this happing because the external is formatted to PC and not mac?
Yes that is correct.
Will I need to get a mac external hard drive if I wish to continue to save my documents like this?
If you no longer use a PC you could format this drive for the Mac. However be aware that formatting a drive will erase all the data on it. So you would need someplace to copy the data off this drive to while you did the re-format and then you could copy the data back.
You could get another drive, format it for the Mac and copy the data to it. Then re-format the original drive and use it as a backup drive. Always good to have backups.
Post back with the drive type and size of the current drive, if you are doing backups now and how and if you still need to access this drive from a PC.
regards

Adobe encore the software that's used to decode the media is not available on this system. installing the correct decoders for the file you are working with may help correct the problem

Hi,
I got this message after importing about ten or so H.264 files that I encoded from Adobe media encoder. "adobe encore the software that's used to decode the media is not available on this system. installing the correct decoders for the file you are working with may help correct the problem."
The files we're shot with HD cameras. Edited in Premiere Pro CS3. I installed the update 3.0.1 with still the same error.
I also tried a brand new project and after about ten or so files being imported into a timeline, the system crash. I tried this twice....
    Thanks in Advance

Hi Hunt,
       Here is the skinny. A window base PC. footage shot with HD sony HD cameras, Project imported to Premiere CS3. Once completed sent file to Adobe media encoder and render them as H.264 widescreen high Quality. Imported them to Adobe Encore CS3. After about ten files or so. I got the error message. Did all the basic trouble shoot like restarting the computer, got latest patch. Even build a new test project with the same problem.
    Something else I read in the forums, is the encore will transcoded the project to Mpeg 2 anyway, after looking at my project I realized those few files were indeed untranscoded. So it will be a double compression and I dont want that. So, my new question is, what is H.264 good for ?????????? I was research that Mpeg 2 is a faster render but H.264 is a slower render but better quality.....
   what do you think ????
   Peter

Help! Serious DNG problem!

Similar Messages

Maybe you are looking for