Help! seriously, i need help

so as of 3 huors ago, my phone was working just fine.. i still got an email and was still logged into my messengers. right now, though, nothing works. i checked my globe prepaid service and it's fine, signal is good. but i can't do anything. emails and bbm messages won't send and i can't log into ym nor msn. my facebook and twitter have gone dead also.
i've pulled out the battery three times and i keep getting the same thing. i tried to go to email settings to reset that but it won't even pull up the page and bb app world won't launch either
please help because i'm deathly dependent on this thing.

Go to your personal email setup > and send the service books books from there.
Article ID: KB15402 How to send service books to the BlackBerry smartphone for BlackBerry Internet Service
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

Hey ammm who can help me y need help but i don´t speak english very well, hey ammm who can help me y need help but i don´t speak english very well

hey ammm who can help me y need help but i don´t speak english very well, hey ammm who can help me y need help but i don´t speak english very well

Post your question in your native language. There are often Spanish speakers who participate in these forums.
Regards.

Help! I need help verifing my account

Help! I need help verifing my account

I would log into the account through iTunes on your computer and supply any missing information.

This is a second try to get help. I need help to uninstall and reinstall Photoshop cc 2014

Bridge is not working well, I need to reinstall Photoshop cc 2014 . Someone from Communities was suppose to help me.

Hi John,
I used the chat "Creative chat support" this afternoon at around 14:40
and the person, Karthik M , gave me a link to Technical Support. I
guess he could not help me, but he said he understood the issue.   With
the link "Help, Adobe Installation problems",   I will follow the
instructions to clean ps cc2014 with CCleaner and reinstall the app.
It looks quite complicated but I will give it a try and hopefully succeed.
You have to understand when reading my previous messages, the issue is
no longer "Retreiving Photoshop CC" but reinstalling Phoshop 2014 to try
to repair Bridge.
Thanks for caring,
Suzanne Lanthier
Le 2014-08-13 15:50, John T Smith a écrit :
>
      This is a second try to get help. I need help to uninstall and
      reinstall Photoshop cc 2014
created by John T Smith <https://forums.adobe.com/people/JohnTSmith>
in /Adobe Creative Cloud/ - View the full discussion
<https://forums.adobe.com/message/6637788#6637788>

TS1538 i need help because i need help getting my ipod touch to connect to windows vista and

i need help getting my ipod touch to connect to windows because it keeps saying udb device not recognized and i tr\]ied restarting the settings!!!!!

Have you tried here:
iOS: Device not recognized in iTunes for Windows

Ey i need help, ey i need help where i can update my ipod 2.2.1 ?somebody help me please

i need help to update my ipod touch 2.2.1 somebody can help me

What is the model number on the back?
What is the shape of the antennae cover and compare it with:
Identifying iPod models
"The iPod touch (2nd generation) can be distinguished from previous iPod touch models by its contoured design and oval shaped antennae cover in the back upper left corner."

SERIOUS PROBLEM - need help! flashing lights!

my ipod has turned into a strobe light machine.
it started when my ipod's battery died. i tried to charge it through a usb hub and power cable. that is, i powered the usb hub directly from a wall socket, then used the ipod cord plugged into the hub to charge it.
*the battery fried*
i went to batteries plus and got a replacement battery. i installed it myself. about a minute later, the ipod heated up veyr rapidly. i feared it would melt the hardrive so i disconnected it and reconnected it. i did this about a dozen times, each time it still got dangerously hot.
then i broke the ribbon cable to the battery.
i didn't do anything to the ipod after that for about 6 months.
i got a new battery today. i retried it, everything worked fine. no heating up. i went to go charge it by plugging it into the computer and itunes popped up saying that the ipod was corrupted, i may have to restore it. so i hit restore, and then it said it couldnt restore because of an *unknown errpr*.
dammit.
the screen had gone a dark grey. i disconnected the battery and reconnected it. the ipod hissed - like a cockroach or somthing - when i did and it began to flash on and off again like a strobe light.
whiteblackwhiteblackwhiteblack thats all it does.
this is the same problem that happened when i fried the first battery
now im INCREDIBLY frustrated. imi praying that someone can please help me!!!!!
thanks and sorry for the long post. this is my first one by the way.

Exactly. Try http://www.iresq.com or http://www.ipodmods.com or one of the other 3rd party repair sites.

Seriously I need help!! PC cant detect ipod through firewire or usb.

It's been months since my 3rd gen 20 GB ipod stopped working correctly. After I installed the new updater for my (03-23-2006) computer, my pc cant detect the ipod AT ALL!!! It's not showing in itunes, not showing up in the updater, and it's not showing up in "My Computer". I plug it in the usb slots, it does NOTHING. Plug it through firewire... all it does is just charges up and that's it.
I tried unistalling and reinstalling old versions of the updater and itunes but even that's not working. My ipod use to work fine by either connecting the ipod through a firewire or USB. Now, NONE of the usb or firewire slots (back and front) wont detect it.
I did the 5 R's hundreds of times and placed it in disk hard trying to see if any of the slots would detect it but no luck!! I also reset the ipod in every usb and firewire slot but no luck. I alse disable my norton antivirus but that didnt help either. There's nothing wrong with the usb or firewire cables because they both worked with my friend's ipod.
I even drove over 5 miles to the nearest apple store to see if they can help and their macs couldnt detect the ipod, even though my ipod was formated for win. They couldnt help me at all.
I've must of done EVERYTHING!!
Someone please help!!!
3rd gen 20 GB Windows XP

My girlfriends 3rd gen 20G Ipod is having similar problems. If I connect it via USB, the PC doesn't recognise it, and if I connect it via Firewire, I get a blue screen with ntfs.sys are the named culprit.
I've tried it on two differnet PCs now with the same results (both with latest iTunes and update software on them).
I've still got a 3rd gen 40G iPod thats working fine with both PCs, so im starting to think it's a problem with the disk in the iPod though. Although it's usable, theres some strange clicking noises when I connect it (before the crash...), and it tends to always skip the first song in a playlist/album etc and only play the second one.
Windows XP Pro
Windows XP Pro

IPod Classic (160 gb) Serious problem, need help!

a day ago, i was playing some music (with iPod speakers), after an hour of playing i connected my ipod to headphones and resumed playng, but my ipod started "lagging" like when i pressed music it took 1 min to enter Music menu. after 15 minutes it returned to normal, and after playing some music for 30 minutes it just froze.
i was not at home so i had no computer to restore it with itunes, so i tried to reset it, when i reseted it ipod logo appeared and nothing more happened. i tried to reset it again but again, i got stuck on apple logo. i decided to let it rest for a while and i wanted battery to die and charge it back up. after an hour it started reseting itself it went on and off again but nothing more than apple logo appeared. every 15 minutes or so it did that. when battery died i recharged it but i couldnt get past apple logo.
i restored my ipod with itunes today. it gave ema an error 1453 (or sth like that) but first when i connected ipod my computer didnt recognize it. i put my ipod into disk mode and then itunes started recognising it. i restored it it kind of started normally sycnronised songs but when i disconected it, bang apple logo appeared. i tried restoring it again but the problem didnt go away. i tried scanning my ipod for viruses. (i have a good anti-virus) so after 40% of scanning was done it gave me an eror that there was no disc. and the scan button never appeared on ipod again after that...
so can anyone help me?
or am i doomed? oh and by the way i bought my ipod 1 year ago and i had dropped it only once throughout the whole year (it was 5 months ago) and nothing happened to it.

I've had that problem before, reboot your pod. hold down the center button and the menu button at the same time till you see the apple logo. That should clear it up.

Help me. i need help imidiadly

hi. i have problem with my itunes. i put music into my playlists but it doesnt play neither the videos. i tried to fix the problem by unistalling it but the problem is still there. can anybody help me?
send email at [email protected] ( i would prefer)
deskopt Windows XP

Moviestar --
Welcome to Apple Discussions !
There is no Safari previous to 10.2.8.
That's why you can't find it.
10.0.4 was a beta version of Jaguar, I believe.
You're talking about a 2001-2002 version.
You would need to buy Jaguar, but since we're now
2 major versions past that, I wouldn't really recommend it.
Panther or Tiger is the way to go. Tiger, preferably.

Photoshop help on signature, need help.....

I am trying to enhance a digital image of my signature. I have no idea how to do this and I have to have it completed at 5PM tomorrow, CST in order that I can use my new application, EchoSign.
Could a Photoshop manager/executive help me correct my digital image on a volunteer basis? I really do not know where/who to ask for help and yet this is probably a simple fix to my signature. I am new to all of this. I can email you the .jpg image of my signature, which really needs to be converted to PDF as well. And I will email further detail as well.
Thank you so much and have a great weekend.
Erik

Most signatures are black and white, so using the levels command can be used to help with the contrast.
Don't send anyone your signature.
If you check on youtube, you can search for photoshop levels command.

HELP MY IPOD NEED HELP

when i turn on my ipod on the coution sign and the sad ipod logo comes up .i try downloading the new updates but when i plug it in to my computer the low bat.sign comes up and dont move i trying resetting ipod but nothing changes could some one help me

Hello,
If a sad iPod icon or an exclamation point and folder icon appears on your iPod’s screen, or with sounds of clicking or HD whirring, it is usually the sign of a hard drive problem and you have the power to do something about it now. Your silver bullet of resolving your iPod issue – is to restore your iPod to factory settings.
http://docs.info.apple.com/article.html?artnum=60983
If you're having trouble, try these steps at different levels one at a time until the issue is resolved. These steps will often whip your iPod back into shape.
Make sure you do all the following “TRYs”
A. Try to wait 30 minutes while iPod is charging.
B. Try another FireWire or USB through Dock Connector cable.
C. Try another FireWire or USB port on your computer .
D. Try to disconnect all devices from your computer's FireWire and USB ports.
E. Try to download and install the latest version of iPod software and iTunes
http://www.apple.com/ipod/download/
http://www.apple.com/itunes/download/
F. Try these five steps (known as the five Rs) and it would conquer most iPod issues.
http://www.apple.com/support/ipod/five_rs/
G. Try to put the iPod into Disk Mode if it fails to appear on the desktop
http://docs.info.apple.com/article.html?artnum=93651
If none of these steps address the issue, you may need to go to Intermediate level listed below in logical order. Check from the top of the lists to see if that is what keeping iPod from appearing on your computer in order for doing the Restore.
Intermediate Level
A. Try to connect your iPod with another computer with the iPod updater pre-installed.
B. Still can’t see your iPod, put it in Disk Mode and connect with a computer, instead of doing a Restore on iPod Updater. Go and format the iPod instead.
For Mac computer
1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
5. Eject your iPod and do a Reset
6. Open the iPod Updater and click “Restore”
For Window computer
Go to folder “My Computer”
Hope you can see your iPod there and right click on the iPod
Choose “Format”. Ensure the settings are at “Default” and that “Quick Format” is not checked
Now select “Format”
Eject your iPod and do a Reset
Open the iPod Updater and click “Restore”
In case you do not manage to do a “Format” on a window computer, try to use some 3rd party disk utility software, e.g.“Partition Magic”.
C. Windows users having trouble with their iPods should locate a Mac user. In many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
Tips
a. It does not matter whether the format is completed or not, the key is to erase (or partly) the corrupted firmware files on the Hard Drive of the iPod. After that, when the iPod re-connected with a computer, it will be recognized as an fresh external hard drive, it will show up on the iPod updater.
b. It is not a difficult issue for a Mac user to find a window base computer, for a PC user, if they can’t find any Mac user, they can go to a nearest Apple Shop for a favor.
c. You may need to switch around the PC and Mac, try to do several attempts between “Format” and “Restore”
Advance Level
A. Diagnostic mode solution
If you have tried trouble shooting your iPod to no avail after all the steps above, chances are your iPod has a hardware problem. The iPod's built-in Diagnostic Mode is a quick and easy way to determine if you have a "bad" iPod.
You need to restart your iPod before putting it into Diagnostic Mode. Check that your hold switch is off by sliding the switch away from the headphone jack. Toggle it on and off to be safe.
Press and hold the following combination of buttons simultaneously for approximately 10 seconds to reset the iPod.
iPod 1G to 3G: "Menu" and "Play/Pause"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Menu" and "Select"
The Apple logo will appear and you should feel the hard drive spinning up. Press and hold the following sequence of buttons:
iPod 1G to 3G: "REW", "FFW" and "Select"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Back" and "Select"
You will hear an audible chirp sound (3G models and higher) and the Apple logo should appear backwards. You are now in Diagnostic Mode. Navigate the list of tests using "REW" and "FFW". The scroll wheel will not function while in diagnostic mode. For further details on Diagnostic mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/
Try to do the 5in1, HDD R/W and HDD scan tests. Some successful cases have been reported after the running the few tests under the Diagnostic mode. In case it does not work in your case, and the scan tests reports show some errors then it proves your iPod has a hardware problem and it needs a repairing service.
B. Format your iPod with a start disk
I have not tried this solution myself, I heard that there were few successful cases that the users managed to get their iPod (you must put your iPod in disk mode before connecting with a computer) mounted by the computer, which was booted by a system startup disk. For Mac, you can use the Disk Utility (on the Tiger OS system disk), for PC user, you can use the window OS system disk. Try to find a way to reformat your iPod, again it does not matter which format (FAT32, NTFS or HFS+) you choose, the key is to erase the corrupted system files on the iPod. Then eject your iPod and do a Reset to switch out from Disk Mode. Reboot your computer at the normal way, connect your iPod back with it, open the iPod updater, and hopefully your iPod will appear there for the Restore.
If none of these steps address the issue, your iPod may need to be repaired.
Consider setting up a mail-in repair for your iPod http://depot.info.apple.com/ipod/
Or visit your local Apple Retail Store http://www.apple.com/retail/
In case your iPod is no longer covered by the warranty and you want to find a second repairing company, you can try iPodResQ at your own risk
http://www.ipodresq.com/index.php
Just in case that you are at the following situation
Your iPod warranty is expired
You don’t want to pay any service charges
You are prepared to buy a new one
You can’t accept the re-sell value of your broken iPod
Rather than leave your iPod as paper-weight or throw it away.
You can try the following, but again, only do it as your last resort and at your own risk.
Warning ! – It may or may not manage to solve your problem, and with a risk that you may further damage your iPod, which end up as an expensive paper weight or you need to pay more higher repairing cost. Therefore, please re-consider again whether you want to try the next level
Last Resort Level
1. . Disconnecting the Hard Drive and battery inside the iPod – Warning !! Your iPod warranty will be waived once you open the iPod.
In Hong Kong there are some electronic shops offering an iPod service for Sad iPod, the first thing they do is to open up the iPod’s case and disconnecting the battery and the Hard Drive from the main board of the iPod. Wait for 5-10 minutes and reconnecting them back. The reason behind which I can think of is to do a fully reset of a processor of the iPod. In case you want do it itself and you believe that you are good on fixing the electronics devices and have experience to deal with small bits of electronic parts, then you can read the following of how to open the iPod case for battery replacement (with pictures)
http://www.kokopellimusic.us/KM_instructions.htm
Have I tried this myself? No, I am afraid to do it myself as I am squeamish about tinkering inside electronic devices, I have few experiences that either I broke the parts (which are normally tiny or fragile) or failed to put the parts back to the main case. Therefore, I agree with suggestion to have it fixed by a Pro.
2. Do a search on Google and some topics on this discussion forum about “Sad iPod”
What should I do with my iPod? Send it or keep it?
http://discussions.apple.com/thread.jspa?threadID=469080&tstart=0
Strange error on iPod (probably death)
http://discussions.apple.com/thread.jspa?threadID=435160&start=0&tstart=0
Sad Face on iPod for no apparent reason
http://discussions.apple.com/thread.jspa?threadID=336342&start=0&tstart=0
Meeting the Sad iPod icon
http://askpang.typepad.com/relevanthistory/2004/11/meeting_thesad.html#comment-10519524
Sad faced iPod, but my computer won’t recognize it?
http://discussions.apple.com/thread.jspa?messageID=2236095#2236095
iPod Photo: unhappy icon + warranty question
http://discussions.apple.com/thread.jspa?messageID=2233746#2233746
4th Gen iPod Users - are we all having the same problem?
http://discussions.apple.com/message.jspa?messageID=2235623#2235623
Low Battery, and clicking sounds
http://discussions.apple.com/thread.jspa?messageID=2237714#2237714
Sad faced iPod, but my computer won’t recognize it
http://discussions.apple.com/thread.jspa?messageID=2242018#2242018
Sad iPod solution
http://discussions.apple.com/thread.jspa?threadID=412033&tstart=0
I am not suggesting that you should follow as well, but just read them as your reference. You are the person to make the call.

HELP! - I NEED HELP WITH JAVA

Hi everyone!
I'm really desperate here! I have coursework to hand this Friday 3rd May and I'm really stuck!
I'm trying to design a program very much like Microsoft Word and I need to add the SaveAs and Open Function in the appropriate buttons.
What I need it to do is as soon as someone starts using the window frame i.e. drawing pictures or/and drawing the SaveAs button must activate and obviously I've got to be able to save whatever is in the window.
I've tried everything I know, which is obviously not enough!, and nothing works.
Can anybody help? I can send the files I'm working on if it helps :-)
Any help very VERY MUCH APPRECIATED
Thanks

Let's see the work you've already done...

HELP! I NEED HELP WITH MY PASSWORD

I RECENTLY PURCHASED MY IBOOK FROM AN INDUVIDUAL AND I CANT SET UP AN EMAIL ADDRESS OR ANYTHING ELSE BECAUSE IT SAYS THAT MY PASSWORD IN INCORRECT.THE USERNAME THAT POPS UP IS MY NAME.I NEED TO FIND OUT HOW TO TAKE CARE OF THIS.ANY HELP? THANKS!

First off, all caps is considered shouting. Bad idea.
As for your actual question -- a bit more information is required. Do you need to change the password for your user account? Your user account is what you login to when you turn on your computer. It might be setup so you don't have to enter your username and password when you boot up. It is set this way if you can turn it on, and when it's done starting, you see a desktop and dock and can use your programs. On the other hand, you might have to enter your username (either by typing or clicking on your icon) and then your password. After doing that you will be at the desktop.
If you can't get to the desktop be, it means you aren't typing the password correctly. Passwords are case sensitive -- perhaps you just need to turn caps-lock off -- e.g., "PASSWORD" is not the same as "password" and if your password is set to something like the latter, typing the former will always fail. If you don't know the password, you can reset it by booting from the system install discs (put in system disc, hold down "c" while turning on the computer, ignore the open popup regarding installation, from the menu, choose the option for resetting the password, choose the user you wish to reset, and then enter a new password).
On the other hand, if you get to your desktop and can use programs, the above is not your problem. Instead, you are having a problem loging into your mail account because you don't know your password. In that case, your only option is to contact the mail service provider and ask for your password. That issue has nothing to do with your operating system.

Help me I need help with flash

I just got flash 8 pro and I try to start it and when I start
it all of the icons and tools are light (color). I think i need to
make some folder in some place and i did that but it still doesn't
work.

adobe1user wrote:
> I downloaded a trial for flash and I wanted to get
started but all of the icons
> and buttons are a light shade and I can't click them. I
looked in the help
> index and it says to make a folder and put a file in it
but that doesnt'
> help.What do i do?
read some more of the help, start making buttons, movie
clips, motion tweens.
Otherwise there is nothing for the buttons to do, no items on
timeline, no functions
available - that is why all is faded.
You need to actually build something in order to be able to
have these function ON
Best Regards
Urami
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami>

Help! seriously, i need help

Similar Messages

Maybe you are looking for