Help - "Server cannot validate the data" error

I have been syncing with Nike.com successfully for months and then last night I received the above error while trying to sync.
I have attempted to re-sync multiple times by putting the XML file back into the Latest folder, but keep getting the same error. I do not have any Ampersands in the playlist, and the XML seems to load fine into Excel and Firefox (i.e., no apparent parsing errors).
Any ideas on what to try next? I really want this workout to sync. Also - does anyone know what the <Calibration> tag is for and what the long number might represent?
I have emailed nikeplus support and even included the XML for the workout in question but no response.
Any help would be appreciated...
-- JM.

Nike+ support emailed me back with this resopnse:
Response (Russ) - 09/21/2006 07:45 AM
Dear John,
Thanks for contacting Nike regarding Nike+.
We are aware of the situation and have a resolution in place that is being upgraded as you read this. Your data is not lost and will update once the resolution is completed. At that time your data should be able to update and load.
Once again, thanks for contacting Nike. Let us know if you have further questions.
Sincerely,
Russ
Nike Timing

Similar Messages

Microsoft Access Text Driver missing! and ...Cannot initialize the data source object of OLE DB provider "MSDASQL" for linked server "(null)".

In order to use OpenRowSet, I installded Microsoft Access Database Engine 2010. However, I could not find Microsoft Access Text Driver in Drivers of ODBC Data Source Administrator. Could I get some help with that?
Thank you very much!

I am local admin and try to run the following script, but I got an error. Could anyone help me look at it?
EXEC sp_configure 'show advanced options', 1
go
RECONFIGURE
GO
EXEC sp_configure 'ad hoc distributed queries', 1
go
RECONFIGURE
GO
SELECT * FROM OPENROWSET('MSDASQL',
'Driver={Microsoft Access Text Driver (*.txt, *.csv)};
DefaultDir=D:\;','SELECT * FROM Test.csv')
Configuration option 'show advanced options' changed from 1 to 1. Run the RECONFIGURE statement to install.
Configuration option 'Ad Hoc Distributed Queries' changed from 1 to 1. Run the RECONFIGURE statement to install.
OLE DB provider "MSDASQL" for linked server "(null)" returned message "[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified".
Msg 7303, Level 16, State 1, Line 1
Cannot initialize the data source object of OLE DB provider "MSDASQL" for linked server "(null)".

Cannot initialize the data source object of OLE DB provider "Microsoft.ACE.OLEDB.12.0" for linked server "Excel_Test"

Here,
I have created a Linked Server Called Excel_Test And its working fine ( For Retrieving data from excel to Sql Server Database Table ) ...
I have written a Stored Procedure for inserting data , When i Execute that stored procedure it is inserting data to Table Which i have
given.
And the data which is in table should be shown in the application,
But, Am getting the following error.
Cannot
initialize the data source object of OLE DB provider "Microsoft.ACE.OLEDB.12.0" for linked server "Excel_Test".
Please help me on this.
Thanks in Advance....

Even am able to retrieve the data from Sql Server management studio.
The same retrieved data should be shown in the application (Dashbord).
Query : Select * from OpenQuery(Excel_Test,'Select * from [Sheet1$]')
Am getting the output excatly the data in the excel sheet.
But when am opening that application where the above data should be shown am getting the below error.
Cannot
initialize the data source object of OLE DB provider "Microsoft.ACE.OLEDB.12.0" for linked server "Excel_Test".
Is this error is because of problem in Dot Net Coding or in the linked server.
Thanks in Advance.....

Help - "Cannot copy file: Data error (Cyclic Redundancy Check)"

Hey there,
I'm having problems with my Zen Mosaic EZ00. Up until a few weeks ago it has been working fine however, since then, has begun to show the error message? "Cannot copy file: Data error (Cyclic Redundancy Check)" whenever I try to copy files on to it. I have tried the recovery software available and it only updated the firmware. Some files do occasionally (and very occasionally) copy but usually it shows the error message and cancels the copy.
I would really appreciate if anyone could help me with this?
Many thanks :smileytongue:

sorry for the double post!
ive just realised that my ipod isnt actually charging, its just got the orange light blinking!
not too sure what is going on now!
lol

Error 58 The specified server cannot perform the requested operation

Hello,
I will try to explain the situation as brief as possible. Next to our current existing MDT environment (MDT2010 on Windows 2008 R2) we are no building a new system (MDT2013 on WIndows 2012 R2). We have multiple sites and the MDT deployment share is setup
in DFRS share so every site is getting the same deployment information and replication is done automatically. This has been working firn for 3 years with the old system and also with the new environment it was working fine in our own subnet. But when after
i have setup the remote MDT and WDS servers it is not working in these remote sites. The images are loading fine but for some reason the win PE is not connecting to the shares on the windows 2012 server in our site. When i manuualy connect from a remote win
PE to our server i always get the error: system error 58 has occured. The specified server cannot perform the requested operation.
I have been doing some troubleshooting and it seems i only got this issue when i connect from win PE 5.0 to a windows 2012 R2 server in a remote subnet.
When i use win PE 5.0 and connect to a windows 2012 R2 share in the same subnet it connects fine.
When i use win PE 5.0 and connect to a windows 2008 R2 share in a remote subnet it connects fine
When i use an older win PE and i connect to a windows 2012 R2 share in a remote subnet it connects fine
When i use win PE 5.0 and connect to a windows 2012 R2 share in a remote subnet it does NOT connect and gives the above error
The problem is that this problem also does not occure in Windows 7, after the machine was build by MDT and get into the OS i can connect without a problem to the windows 2012 R2 shares.
Checking the event viewer on the 2012 R2 server that is hosting the shares i see that the following events are created:
4624: An account was successfully logged on.
Subject:
Security ID:
NULL SID
Account Name:
Account Domain:
Logon ID:
0x0
Logon Type: 3
Impersonation Level: Impersonation
New Logon:
Security ID:
domain\username
Account Name:
username
Account Domain: domain
Logon ID:
0x1F1FC0
Logon GUID:
{8e360e91-001b-c726-84a6-e7281a4bcac8}
Process Information:
Process ID:
0x0
Process Name:
Network Information:
Workstation Name:
Source Network Address:
x.x.x.x
Source Port:
60077
Detailed Authentication Information:
Logon Process:
Kerberos
Authentication Package:
Kerberos
Transited Services:
Package Name (NTLM only):
Key Length:
0
This event is generated when a logon session is created. It is generated on the computer that was accessed.
The subject fields indicate the account on the local system which requested the logon. This is most commonly a service such as the Server service, or a local process such as Winlogon.exe or Services.exe.
The logon type field indicates the kind of logon that occurred. The most common types are 2 (interactive) and 3 (network).
The New Logon fields indicate the account for whom the new logon was created, i.e. the account that was logged on.
The network fields indicate where a remote logon request originated. Workstation name is not always available and may be left blank in some cases.
The impersonation level field indicates the extent to which a process in the logon session can impersonate.
The authentication information fields provide detailed information about this specific logon request.
- Logon GUID is a unique identifier that can be used to correlate this event with a KDC event.
- Transited services indicate which intermediate services have participated in this logon request.
- Package name indicates which sub-protocol was used among the NTLM protocols.
- Key length indicates the length of the generated session key. This will be 0 if no session key was requested.
5140:
A network share object was accessed.
Subject:
Security ID:
domain\username
Account Name:
username
Account Domain: domain
Logon ID:
0x1F1FC0
Network Information:
Object Type:
File
Source Address:
x.x.x.x
Source Port:
60077
Share Information:
Share Name:
\\*\Captures
Share Path:
\??\D:\Captures
Access Request Information:
Access Mask:
0x1
Accesses:
ReadData (or ListDirectory)
4634:
An account was logged off.
Subject:
Security ID:
domain\username
Account Name:
username
Account Domain: domain
Logon ID:
0x1F1FC0
Logon Type: 3
This event is generated when a logon session is destroyed. It may be positively correlated with a logon event using the Logon ID value. Logon IDs are only unique between reboots on the same computer.
Anyone an idea why this is happening?

Hi,
We can refer to the following blog for MDT troubleshooting:
http://blogs.technet.com/b/askcore/archive/2012/05/08/mdt-2010-amp-2012-my-deployment-failed-what-and-where-are-logs-i-should-review.aspx
Best Regards,
Vincent Wu
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Error Happened at RFC Server Cannot Open the Job Batch File.

We have BW 7.0 and Data services 12.1. We are scheduling a Infopackage in BW that triggers a job in Dataservices server.
We had checked the connection between Dataservices source system in BW and RFC server on Dataservices side and these connections are good. on the 3rd party sellections tab in infopackage we specify the batch file name that we exported in Dataservices server. When we execute the infopackage we get the following error.
Error Happened at RFC Server Cannot Open the Job Batch File.
This error started occuring from yesterday and prior to that it was working fine. We are not understanding what changed in the system to cause this error.
Can anyone suggest any solutions for the above issue.
Thanks,
Naveen.

I'm not sure what the root cause would be here. Is the file still available ? Did file permissions change ? ...
But I wanted to point your attention to the fact that in Data Services/Data Integrator XI 3.2 (=12.2) we significantly enhanced the integration with BW. In XI 3.2, the RFC server is now integrated into the Data Services Management Console (so no need to start as a seperate executable) and you can start jobs from BW by just specifting the job's name in the repo (no need anymore to export execution commands to .bat files). So if upgrading to XI 3.2 is an option, things should go much smoother.
More details on the wiki : http://wiki.sdn.sap.com/wiki/display/BOBJ/Loading+BW
Thanks,
Ben.

Installation error: cannot find the data source checking utility (dbcheck)

BO XI 3.0:
During the process of installing "Dashboard and Analytics Servers", we've got this error.
Installation error: cannot find the data source checking utility (dbcheck)
Have anyone encountered this issue? We can't move on after this error.
Thanks,

I've fixed the problem.
Lianjun.
Lianjun (guest) wrote:
: I've tried to run the latest beta version of OMWB to migrate
from
: MS SQLSERVER7.0 to Oracle8i. At step 4:Source Database Details,
: every time I put in the data source name (which is in the
control
: panel-ODBC data source Administrator), it gave an error message
: that Data source name not found and no default driver
: specified).Anybody has any ideas?
: Thanks for the help!
: Lianjun.
null

Error:The server cannot service the request because the media type is unsupported

Hi Experts,
I have configured one IDOC to web service synchronous scenario in SAP PI 7.31 using BPM. In the webservice response step of BPM we are getting the below error.
The server cannot service the request because the media type is unsupported.
Could you please assist?

Send the same xml from SOAP UI to test the webservice. If you get the similar response, you should check with your service provider on what is the expected content/format.
May be you might have to change the content type before sending the message to webservice.

Connecting to remote server failed with the following error message : Access is denied. For more information, see the about_Remote_Troubleshooting Help topic. It was running the command 'Discover-ExchangeServer -UseWIA $true -SuppressError $true -CurrentV

I installed Exchange Server 2010 inside my VMWare Windows Server 2008 Ent R2. And After successful installation when I try to open my Exchange Server Console, I am getting the following error message. I am very new to Exchange server please help me
to solve this problem.
Initialization Failed
The following error occurred while searching for the on-premises Exchange server:
[win-.local] Connecting to remote server failed with the following error message : Access is denied. For more information, see the about_Remote_Troubleshooting Help topic. It was running the command 'Discover-ExchangeServer -UseWIA $true -SuppressError
$true -CurrentVersion 'Version 14.1 (Build 218.15)''.
Thanks Vivek
SharePoint Foundation 2010 Book
http://www.redpipit.com

Hi,
Please have a look at the article below:
Troubleshooting Exchange 2010 Management Tools startup issues
http://blogs.technet.com/b/exchange/archive/2010/02/04/3409289.aspx
Resolving WinRM errors and Exchange 2010 Management tools startup failures
http://blogs.technet.com/b/exchange/archive/2010/12/07/3411644.aspx
Besides, please run the cmdlet below:
set-user alias -remotepowershellenabled$true
Xiu Zhang
TechNet Community Support

Microsoft Excel cannot paste the data

Hi,
I have a user that is working on a Vista Terminal Server with Excel 2010 on it. The user will copy a large amount of data in Excel 2010 and try to paste it into Excel 2010 on his local machine being Win 7 and Excel 2010. Sometimes it works, for
example if the terminal server has just been rebooted, but then most of the time Excel locks up and throws this error "Microsoft Excel cannot paste the data". Has anyone ever had this problem and if so, have an answer for the problem? Anyone have
any suggestions? Could it possibly be the clipboard?
Any help is greatly appreciated.
Thank You!

I had to create an acct here just to reply in hopes I could help others with this error as it was driving me nuts.
There is one solution I have not seen suggested, that I determined I could reproduce 100% of the time for the messagebox error of "Microsoft Excel cannot paste the data" either between workbooks, worksheets, or even within the same worksheet.
I wonder how many of these folks have clipboard managers/enhancers running? Even though there is no legitimate reason a simple paste even of unformatted cells of only values would still result in the above error, but in my case having CLIPJUMP running
and simply maintaining clipboard history of multiple entries, a simple single data item paste from Excel, to Excel, results in this Excel error.
My clipboard manager <tries> to grab formatting, as do many others, which is why I believe some posted workarounds involving pasting into another app and back have helped.
So, even though they may not ever conflict with anything.....disable <anything> that touches the clipboard in <any> way, and from what I can tell that will solve many occurrences of this error since different clipboard managers/enhancers
have become more and more common.
Simply shutting down my clipboard manager for the time I use Excel has 100% eliminated this error.

Cannot initialize the data source object of OLE DB provider "OraOLEDB.Oracl

I have created a linked server in a SQL Server 2005 connecting to either an Oracle Database and a SQL Server 6.5 database and getting the following error for both links when trying to query using provider OraOLEDB.Oracle, please help.
OLE DB provider "OraOLEDB.Oracle" for linked server "finprod3" returned message "ORA-12154: TNS:could not resolve the connect identifier specified".
Msg 7303, Level 16, State 1, Line 1
Cannot initialize the data source object of OLE DB provider "OraOLEDB.Oracle" for linked server "finprod3".

What version of Oracle client software are you using? 32 bit or 64 bit? Is the OS 32 bit or 64 bit?
12154 generally means the client can't figure out what TNSNames.ora entry you're referring to, which is the part you passed as "data source" in the oledb connection. Did you configure the client? Does SQLPlus connect without issue?
There's also a known issue where running 32 bit client software on a 64 bit OS can result in that error in some versions, due to parenthesis in the path of the executable - 32 bit apps go in Program Files (x86) on a 64 bit OS. Applying the latest patch level to the client software will resolve that issue.
Greg

Cannot Interpret the data in the file

Hi,
I need to upload rate routing and I have created a BDC program using a sample recording.
While I am uploading the data from the flat file, I am getting an error message " Cannot Interpret the data in the file ".
Please help me where I might have gone wrong. I have checked with template in the flat file and it is correct.
Please do the needful.
Thanks,
Ranjan R Jinka
Edited by: Ranjan Jinka on Apr 29, 2011 8:55 AM

Hai Ranjan,
Please, Check this
" Can not interpret the data in file " error while uploading the data in DB
- Check the heading of the excel column and filed used in program.
If possible, please paste the program so the viewers have a better idea and you will get the exact solution.
Regards,
Mani

ITunes cannot read the data on my iPod touch

Just three weeks or so ago, I was able to use iTunes without any problems to put a few songs on my iPod Touch 2nd Gen. Recently, however, whenever I try to connect my iPod to iTunes via USB, I get an error message that says something along the lines of: "iTunes cannot read the data on xxx's iPod Touch. Go to the Summary tab and choose Restore to restore this iPod to it's original factory settings.". I don't know why it says this since my iPod is functioning normally. My iPod shows up on the left hand side of the iTunes window as "iPod" instead of "xxx's iPod Touch" like it used to. The only options I have are Check for Update (disabled) and Restore. Is there any way to fix this without restoring my iPod? And if I have to restore, can I do so without losing (or having to re-transfer) any of my data that hasn't been or can't be backed up? Please help and thanks in advance!
P.S. My iPod is in its genuine state: it hasn't been jailbroken or anything like that.

Unfortunately, I've already tried that. Also, here is a list of other things I've tried, but have taken no effect:
-Recharging, Restarting, Resetting, and Reconnecting my iPod Touch to my computer
-Restarting my computer
-Reinstalling iTunes
-Reinstalling all iTunes, Apple, and iPod USB drivers
-Updating the same drivers (but no updates were found)
-Using a different USB port
-Connecting to a different computer (doesn't work on my Toshiba laptop either, which is running the same OS and the same version of iTunes as my PC)
My backup plan was to copy the new songs to my iPod by pasting them through Windows Explorer. My iPod shows up as a portable device under My Computer - as always - but the only thing I can access is a folder full of the photos on my iPod. I think this is normal, but I can't do what I want to do! Do you (or anyone else) have any other good ideas? Remember, I really don't want to do a restore unless I absolutely have to.

"The specified server cannot perform the requested operation" when rpc from server 2003 to Windows 7

I am having problems where all my Windows 2003 servers cannot rpc to 2 of my Windows 7 workstations, error message is "The specified server cannot perform the requested operation".
All the machines are in workgroup environment.
Windows 7 workstations: desk1, desk2, desk3, desk4, desk5, desk6
Windows 2003 servers: server1, server2, server3, server4, server5
Windows 2008 server: server6
From any Windows 7 workstation I can rpc to any other machines,
\\desk1\d$, no problem
From any Windows 2003 server I can rpc to all the machines exception desk4 and desk5, they give the "The specified server cannot perform the requested operation". However, desk4 and desk5 can rpc to any other machines (including the Windows 2003
servers), no problem
From Windows 2008 rpc to desk4 and desk5 also no problem.
I also have no problem rpc between any of the Windows 2003 servers,
\\server2\d$ from server3, no problem.
I turned off the firewall at desk5 and desk4, just to try, but didn't help, same problem. This show firewall is not the cause of the problem.
Desk4 and Desk5 used to run Windows 2012 for 1 year and recently I downgraded them Windows 7 Professional x64. When they were running as Windows 2012, those Windows 2003 servers have no problem rpc to desk5 and desk4.
The issue is thus lying between desk4 and desk5 with Windows 2003 only\
Any suggestions?
Valuable skills are not learned, learned skills aren't valuable.

Hi,
I found a related thread and a hotfix for similar issue:
Problems Accessing Administrative Shares Remotely - Windows cannot access \\Servername\ShareName
http://social.technet.microsoft.com/Forums/windowsserver/en-US/9807a799-bea3-46ad-92a5-732779135f98/problems-accessing-administrative-shares-remotely-windows-cannot-access-servernamesharename?forum=winserver8gen
You cannot access an administrative share on a computer after you set the SrvsvcDefaultShareInfo registry entry to configure the default share permissions for a network share
https://support.microsoft.com/kb/971277/en-us
Also please check if it is caused by security program such as antivirus program.
If you have any feedback on our support, please send to [email protected]

"The Server cannot find the document corresponding to the document id"

Periodically when we schedule a Discoverer Report (Apps EUL) we get the following error:
"The Server cannot find the document corresponding to the document id sent for open"
Months back Oracle told us to do the following as a workaround:
Log into Oracle Desktop, schedule something, then go back to OracleBI Discoverer Plus.
The error goes away.
This is an insane workaround. Has anyone seen this error and found a patch or a realistic workaround.
Thanks,
Bob

Bob.
I haven't seen this problem, but sure makes me wonder what Oracle is up to, when they essentially tell you to "give the scheduler a good slap via Disco Desktop" every now and then.
Maybe is you created an SR in Metalink you could slap them back on this one!
Russ

Help - "Server cannot validate the data" error

Similar Messages

Maybe you are looking for