HELP:SET COMMANDS in procobol

We are porting applications from Oracle 7.3.4 to Oracle 8.
The following set commands are giving syntax errors when compiling in Oracle 8 using procobol compiler.
EXEC SQL SET CONCURRENCY READONLY END-EXEC.
EXEC SQL CURSORTYPE CUR_STANDARD END-EXEC.
Thanks for help.

DMX predates Vista by at least 4 years. You may be out of
luck.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"jslist" <[email protected]> wrote in
message
news:g7i1fj$625$[email protected]..
> Just got a new machine - running Vista with Dreamweaver
MX 6.1. When I
> click
> on the Toolbar - on Commands or Help - it closes the
program. I just
> installed
> the updater to make it 6.1 - but it didn't help.
>
> Any ideas?
> Jess
>

Similar Messages

  • A summary of set commands that are accepted by SQL Developer...

    Sorry, I've been looking for a list of commands that are used by SQL Developer such as "set verify off|on", etc.
    Can anyone point me to a list of these commands (the equivalent to SQL*Plus set commands)?
    Thanks in advance!
    Tom

    Hi Tom,
    Try Help|Table of Contents|SQL Developer Concepts and Usage|Using SQL Worksheet|SQL*Plus Statements Support and Not Supported in SQL Worksheet.
    What you see there depends on your SQL Developer version. Over time, SQL*Plus support keeps improving.
    Regards,
    Gary Graham
    SQL Developer Team

  • What is the second, third, etc. next-hop address in the route-map set command for?

    What is the second, third, etc. next-hop address in the route-map set command for?
    route-map TEST_PBR permit 10 match
    match ip address 101
    router(config-route-map)#set ip next-hop 1.1.1.1 ?
    A.B.C.D IP address of next hop

    Hi,
    You may get your answer in below link
    http://www.groupstudy.com/archives/ccielab/200812/msg00999.html
    First next-hop will be used unless until that is not unreachable. If first is unreachable, then next one will be used. Since these next-hops are directly connected, router can easily come to know whether they are active or not. In case you want to set some loopback ip as next-hop then you need to use keyword recursive "set ip next-hop recursive"
    --Pls dont forget to rate helpful posts--
    Regards,
    Akash

  • Help Set IdeHelp not found - JavaHelp 2.0 (RC2)

    Hi all,
    I was trying to run IdeDemo with the following command (in the JH_HOME/demos/bin directory):
    java -jar ideDemo.jarI got the "Help Set IdeHelp not found" message. I understand that the help set file is in the hsjar/idehelp.jar. Do I have do unjar it so that the ideDemo can pick it up? Thanks in advance.
    Prudence

    How to use IDEDemo.jar ?
    1. unjar the .jar file hsjar/idehelp.jar.
    2. run command "java -jar hsviewer.jar" in the JH_HOME/demos/bin directory.
    3. select idehelp.hs file from the hsviewer dialog.
    4. click "OK" button to preview IDEDemo.
    If you are a JavaHelp newer, I suggest that you see the following demo first.
    It is very good and simple.
    http://www.pivotonic.com/jawahelpauthor/HelloJavaHelp.zip

  • Help setting Class Path

    hi,
    I just downloaded and installed JDK 5 update 7 and need help setting the class path. Can someone give me instructions on how to do this in windows XP please.
    Cheers

    thanks for the replies guys.
    I'm still having problems. What I want to be able to do is compile a .java file using the Command Prompt in windows XP.
    Currently, when I type javac I get the message:
    'javac' is not recognized as an internal or external command, operable program or batch file.I set the classpath to C:\jdk1.5.0_07\bin\ but when I type path in the command prompt this path doesn't appear.
    If I change the directory in the command prompt to C:\jdk1.5.0_07\bin\ then type javac it works (I get a list of commands) but I need it to work from within any folder.
    Have I set the classpath incorrectly or is it something else?
    Thanks

  • W'azup with SQL Developer barfing on SQL*Plus "set" commands

    Check out this short script and the results it generates, as pasted below.
    I can't find anything in the SQL Dev documenation re: what SQL*Plus set commands it supports and which it considers "passe." I'm particularly puzzled by the "column ... format ..." command getting ignored.
    set heading off
    set pagesize 0
    set linesize 80
    set feedback off
    prompt ...start...
    column x format a5
    select 'abcdefghij' x from dual;
    prompt ...end...
    line 1: SQLPLUS Command Skipped: set heading off
    line 2: SQLPLUS Command Skipped: set pagesize 0
    line 3: SQLPLUS Command Skipped: set linesize 80
    ...start...
    X ----------
    abcdefghij 1 rows selected
    ...end...

    For supported SQL*Plus commands: SQL Developer Help > SQL Developer Concepts and Usage > Using the SQL Worksheet > SQL*Plus Statements Supported and Not Supported in SQL Worksheet.
    The "column ... format ...." command is not supported. A workaround is to use substr in your select statement.
    See also How to set a column size in sqldeveloper?

  • Help setting up BTinternet email with Apple Mail

    Hello everyone,
    I need help setting up a btinternet email account with Apple's Mail sofware. I am setting it up on behalf of my aunt and uncles new macbook pro so I hope i get some solutions quick because Im leaving their place by the end of the weekend and I would love to have their email setup and teach them how to use it. 
    They have 2 btinternet email accounts, the first one they use alot as its their main email account which is currently setup on MS Outlook on their old computer. The secound one they use rarely and its not setup on MS Outlook. 
    Heres the problem, when I setup their main email account with apple mail, I have no problem creating the account however once created the inbox is empty - it does not load previous emails. It can send emails fine, if i send an email to the account using my personal email it will receive it but when I switch off the computer and switch it back on the mail box is empty. So I checked the email account by going to yahoo.co.uk and signing in - again even on the web page the mail box is empty.
    I then setup the second btinternet  email account on Apple Mail shockingly this works perfectly all the old emails got loaded up in mail. So how do I do this for the main account, I know the difference is Outlook mail but I rather not delete that because if it doesnt work then they would lose all their old emails.
    Please help
    Thanks in advance
    PS: ive setup my hotmail and yahoo accounts and they all work fine by the way

    Please guys give me something or any random ideas u may have. im running out of time.

  • HOW TO?: Need help setting up 3 different iCloud accounts for my kids (so each has own iMessanger)using same Apple ID (mine) ....they don't have their own separate email addresses to work from...how do I do this?

    Need help setting up 3 different iCloud accounts for my kids (so each has own iMessanger)using same Apple ID (mine) ....they don't have their own separate email addresses to work from...how do I do this?

    Any devices connected to the same icloud account can sync all the data on that account.  For this reason an icloud account is really for a single user.
    On a mac, if each user has their own account, then the itunes for that mac account should be set up to connect to that user's icloud account (System preferences>icloud).

  • Help setting up my new IPod Touch on iTunes on windows 7 64bit

    Hello there,
    I need help setting up my new IPod Touch to my Itunes 10 application on a PC running windows 7 64bit. I have watched the tutorial on how to do it but what the tutorial says it is supposed to do is not what is happenning for me:
    1. In the tutorial it tells you to connect your ipod to your computer, then, (if it is for the first time) when the ipod appears and is selected, a window will come up allowing you to name your ipod, and begin selecting the options you wish to use.
    I did as instructed but quickly came against some technical issues.
    My issues:
    1-1: When I selected the new iPod Touch for the dirst time I got an error message.
    A) This was quickly fixed once I calld up apple support on the phone (turns out an IE browser setting was blocking it.)
    1-2: With that fixed I selected my iPod Touch again but instead of the window indicated by the tutorial, I instead got an iPod registration form window.
    1-3: I filled out the form and pressed the submit button (thinking everything was fine), then a new window came up that looks like this:
    Free Find My iPhone
    Free Find My iPad
    Free Find My iPod touch
    Set up Find My iPhone for free so you can locate your device if you lose it, remotely lock the screen, or wipe its data. You can also find your iPad or iPod touch.Set up Find My iPad for free so you can locate your device if you lose it, remotely lock the screen, or wipe its data. You can also find your iPhone or iPod touch.Set up Find My iPod touch for free so you can locate your device if you lose it, remotely lock the screen, or wipe its data. You can also find your iPhone or iPad. _Learn More_
    _Set up Find My iPhone_
    _Not Now_ _Set up Find My iPad_
    _Set up Find My iPod touch_
    Find My iPhone (or iPad or iPod touch) enables you to locate your iPad with Wi-Fi or iPod touch only when it is on and connected to a registered Wi-Fi network. Find My iPhone is not available in all countries. "
    The first three lines and the first paragraph are indented as if there should be some type of graphic there, but it is missing. The underlined words indicate that they are supposed to be links, but they don't go anywhere, they are broken!
    Now wheenever I connect my iPod Touch and select it the above window comes up and nomatter what I try it will not move or change.
    Please help!
    MSRankin

    Try setting up the device in a new user account. or visit register.apple.com and verify your device is registered

  • Need Help Setting Up a new Network ..

    Hello 
    Newbie question, I am attempting to setup a small home network, where I want three WLANS
    Main
    Guests
    Kids
    I want to set up different policies for these three networks. 
    I want the Kids to be able to access the Media server and other network devices, but limit the internet access. I want guest network to not be able to see the other two networks. 
    I have an ISA550 Firewall a 2504 Wireless Controller and a SG300-28P Switch. 
    I did manage to setup the Vlans on the ISA550 - Default as 192.168.75.x , Guest as 192.168.25.x and Kids as 192.168.35.x 
    From here on - I would need some help setting it up the right way, Please help. 
    Thanks

    rmunoz274 wrote:
    I had to call Verizon and spend an hour on the phone, my Versalink is about 3 years old and I never updated it. There is a software update which makes it a little more mac friendly. Cables still run through it on the Ethernet port. I was able to turn the wireless feature off on the Versalink (to stop my neighbors and kids from bypassing the APE and just factory reset the APE and set it up with a shared IP adrs instead of bridging it. Also made sure I turned off the guest network on the APE. Once it was set up I clicked on Airport in the Airport Utility then wireless Clinets, jotted down the client I wanted to restrict access to (Kid's Laptop) then go back to Airport screen, last option on right Access then MAC Adrs Access Control change to "Timed Access", then click the + on the bottom of the window, type the MAC adrs you want to restrict and set time limits, when complete click done..... Only took me a week and a half to figure it out...... Good luck, if that doesn't help let me know, but I'm no expert...
    thanks!!
    i think i have the most recent 327w update, because it now shows my modem screen in a red color and it is broken into 3 sections across the screen.
    as far as the AEBS is concerned, you did not use it in bridge mode at all?
    i thought you had to connect 1 cable from it to the 327w? I have about 5 items i will be connecting, so i will probably run any wired from the AESB, but not sure yet?
    thanks, and yaeh last time my network took me a bit of time as well!!
    what kind of encryption are you running?
    thanks

  • Need help setting up TV equiptment

    I have been very ill and I need help setting up my TV, DVR, Receiver, Surround sound systems. I'm afraid if I try to work on all the equiptment, I'll drop my HDTV or other componets because I'm still weak. Can anyone help me? I've called a few places and they want $100.00 to set it up. Give me a break! I know about inputs and outputs and other cables, I just don't have the strength to move the equiptment around. I am willing to pay. Please call me at 813-{edited for privacy}. Thanks, Teresa {edited for privacy}

    blondeinneed wrote:
    I have been very ill and I need help setting up my TV, DVR, Receiver, Surround sound systems. I'm afraid if I try to work on all the equiptment, I'll drop my HDTV or other componets because I'm still weak. Can anyone help me? I've called a few places and they want $100.00 to set it up. Give me a break! I know about inputs and outputs and other cables, I just don't have the strength to move the equiptment around. I am willing to pay. Please call me at 813-{edited for privacy}. Thanks, Teresa {edited for privacy}
    Teresa,
    I think the best way for someone to volunteer to help you would be for them to send you a Private Message (PM) here on the forums. You should see a small envelope in the upper right corner of the screen, when it changes color you will know you have a PM to view.
    I would be happy to help, but since I am in North Texas I don't think that is a viable option Sorry....
    Justin
    FiOS TV, Internet, and phone user
    QIP7232, QIP7100-P2, IMG 1.9A
    Keller, TX 76248

  • Need help setting up and configuring rsync

    Hello
    I need help setting up, or rather configuring rsync to sync data between my brand new iMac and my Macbook Air.
    Here is what I would like to:
    - I want all of the files on both machines to be an exact mirror or copy of each other. Basically I have an iMac for at home, and then a Macbook Air for the road.
    - The main folder on both Macs is called 'Sara' and I want the contents (mainly the 'movies' folder, 'music' folder, 'documents' folder and 'pictures' folder) to immediately sync up with each other when both of them are on my home network.
    - this means if I'm working on a file at home on my Macbook, it will immediately write to the same directory on my iMac and vice versa (if I'm working on file(s) on my iMac, it will immediately save the contents to my Macbook). This way, if I'm working on last minute project my iMac, and then have to head out the door to the airport, the file is immediately saved to my Macbook (no usb for USB transfer).
    - hopefully this makes sense??
    Any help is greatly appreciated!
    Thanks

    It's a lofty but unrealistic goal.  Rsync does not run automatically.  There is no realistic method of instantaneously synching two computers over the internet or even on a LAN.
    I would suggest you might try using Synk Pro which, in theory, can keep two devices in sync when they are both on the same network (and both have shared and mounted drives.)
    If you must do this with rsync then I suggest a Google search for rsync tutorials.

  • How to save a new value for Set command variable

    I am using SET [variable = [String]] to update Set variable. It works fine. But when I restart MSDOS Prompt, I get old value for variable.
    How to save a new value for SET command variable?
    I am using Windows XP.

    And this has to do with java how?

  • I need help setting up an apple id for my sons phone. It seems his email address has been taken and/or we cant get the password.

    I need help setting up an apple id for my son's phone. It seems his email address has been taken and/or we cant get the password.

    Two different things
    If you forgot the password
    If you forgot your Apple ID password - Apple Support
    If the email ID you want to use is in use by someone else - then you may need a new one
    The iCloud ID's are usually unique and may be of help if you set one up

  • Need help Setting up Multiple Static Ip , 1 for each port of the fios router

    Need help Setting up multiple Static Ip on my fios router
    I have been trying to figure out how to set up multiple ip in my fios router.
    However I kind of managed how to set up multiple static ip However the way I want it is for each port of my router to have an external ip signed to it. ( like 4 different modem in 1 )
    Verizon gave me 5 static ip but they can not help me how to set it up.
    Have anyone here done more then one static ip on different ports? I assume that the process will be the after the second static ip.

    You want to set up Static Nat. You will not assign the IP to a port, but rather to a local machine. Figure out what machines you want your IP's to go to. Under the firewall section you will see static nat. Pick the machine you want and enter one of the IP's you were assigned.

Maybe you are looking for