Help set up AirPort with TTNET DSL router in Turkey

New AirPort TIme Capsule cannot connect to Internet via TTNET DSL router. I am currently in Turkey. My previous set up was Lincsys WiFi Router connected directly into the same TTNET DSL router (which was provided by ISP) and worked fine.
With the AirPort Time Capsule set as Router - Off (Bridge Mode). It does not allow for Double NAT : "This AirPort base station has a private IP address on its Ethernet WAN port. It is connected to a devis or network that is using NAT to provide private IP. Change your AirPort to bridge mode".
Everything worked fine for a few days, but now not unable to connect to the internet.
I do not have any info from ISP. Nothing that I can find.
Any help would be greatly appreciated.

Try simply rebooting the TC.. every now and then they do have tendency to just drop out.
Otherwise give us some more info.
What make and model is the DSL router??
Does your ISP use pppoe authentication? If so it may be possible to bridge it and use the TC as main router.

Similar Messages

How to setup TIme capsule with a DSL router step by step?

Hi All,
Does anyone know how to conncet Time Capsule set by step through a DSL router?
I already have a DSL router, but want to connect my time capsule to that router.
Do i connect it through ethernet?, and is it possible to have my time capsule as a different router at home with a different password than the DSL router?, if so how is that possible?, is going to have the same download/upload speed as the DSL router?
Please help, thanks

You simply bridge the TC.
Plug it by ethernet into the adsl modem router and it will work fine.
nd is it possible to have my time capsule as a different router at home with a different password than the DSL router?,
No, the TC will cause trouble if you set it up as a router.. it has to be bridged. You only have a single adsl connection but there are some ISP that allow a secondary pppoe login and some modems that allow it. It is pretty difficult setup. Ask your ISP as there is often a charge that is very high for the second connection. It will still share the same link so there is no improvement in speed, merely two different authentications sharing the same line. The TC can do pppoe client but has nothing very fancy about it.

Issue with 2wire dsl router when connecting power pc g4 via ethernet

Issue with 2wire dsl router when connecting power pc g4 via ethernet. The 2wire will keep resetting. When I connect my macbook pro via ethernet to the 2wire all is ok, but as soon as i connect the power pc. . . .reset. I have emailed 2wire support. They recommended using a different patch cable. Tried that.. .. anyone else having this issue???? Any help would be appreciated. . .

Search the discussions for issues with 2wire dsl routers. This has come up before in a discussion I've been involved with, but probably not to do with the MDD. I do remember it being a design issue with the router, something that was done to it before dispatch.
Let us know if you can't find it and we'll have a look.
If you afford it, bin the 2wire and go buy something decent like a Netgear.

Need help setting up Airport Express A1084 in Windows 7 via Netgear WNDR4500 wireless router

Hello All. I bought a used Airport Express A1084 off the net. Never had one before. My intention is to remotely control (via my iPhone using Apples Remote app or possibly XBMC) a "pc with music" and stream thru the AE connected to a boombox. I want to be able to take AE and boombox to the front yard, back yard, garage, or wherever my Netgear WNDR4500 will reach.
So far I have hit the reset on the AE and while holding, plugged it in to power (still holding) until the green light blinked. I let it go. Waited for it to complete booting (slow blinking yellow/amber light). The AE did not show up in Airport Utility ver 5.6.1. I uninstalled that version and installed older Airport Utility ver 5.4.2. Same results. I power cycled the router, turned off the Norton 365 firewall, and still get nothing. At one point though, I walked away for a while (an hour or so), came back and saw the AE listed in the left window pane of Airport Utility. I thought maybe I just didn't wait long enough so I clicked Manual Setup and it started to read the AE but Errored 10057. I tried again and got same error. I refreshed and the AE was gone.
Can someone tell me how to correct this so I can confirm I didn't buy a "brick"?
Thanks in advance,
Tom

Just so you are aware, the A1084 AirPort Express is a 802.11b/g wireless router that can only operate on the 2.4 GHz band. Regardless, it can be configured to join the wireless network provided by the Netgear as long as that network is configured to be backwards compatible with 802.11g clients. However, in the long run for performance, you do NOT want any non-"n" wireless clients connecting to your Netgear's network.
The 5.6.1 version of the AirPort Utility for Windows does not support the non-"n" version of the AirPort base stations. You would need to use an earlier version that will still run on Windows 7.
One thing to try would be to temporarily connect the Express directly to your PC using an Ethernet cable, and then, try accessing it with the AirPort Utility. If you are still unable to do so, you may have gotten yourself a defective unit.

Need help setting up my d-link wireless router to my imac

I need some help trying to set up my D-Link WBR 2310 wireless router to my iMac. I currently have Bell Sympatico high speed.
The reason I want to set up the wireless router is because my girlfriend works from home sometimes with her office computer downstairs and needs a wireless connection (she has a PC). I tried to call D-Link, but they're useless.
Anyways, any help would be greatly appreciated. It would be great to know what settings to change and as much step by step info as possible. I realize it's probably pretty simple to set up, but I'm fairly new to Macs and also to wireless.
Thanks again

Hello,
Connect the D-Link to the iMac by Ethernet.
Open Safari (or Firefox)
Navigate to http://192.168.1.1
Enter your password (default user is Admin and password "admin" - change it!)
Find the Wireless Security section and change the SSID to your own name i.e. "home network" .
Set the Encryption setting to "WPA" and enter a password of your choice. This is the encryption key and is different to the router's admin password.
Configure the WAN part of the router (which will vary depending on your ISP).
Configure the DHCP to serve clients (should be a simple on/off).
Disconnect the iMac
Go to the iMac and turn on Airport on (on the menu bar).
When the iMac finds your SSID select it and enter the encryption password.
Check to allow Keychain to store that detail.
Hope that helps
mrtotes

I need help setting up airport express to play my Itunes music to my stereo

Hello I am hoping someone can help me as I am at a total loss here. I have had an airport express for a few years and would stream my music to my stereo without any problems. A few months ago it would cut out every now and again but soon it got so bad it was unlistenable. I reset it many times but to no avail.
Now when I try to reset it by opening the airport utility it scans but does not find the airport express.
I bought a pluglink ethernet adapter and connected it to the Airport Express hoping I can run it through that but when I open up the airport utility it scans but still will not recognize the airport express.
Is there some way to set this up .
I have an IMac which has the latest operating system.
Sincerely grateful for any help in this matter Paul K.

Hello blakemj. Welcome to the Apple Discussions!
For your described network configuration, you will want to reconfigure your 802.11n AirPort Express Base Station (AXn) as a "wireless client" to the Buffalo wireless router.
Here's how ...
Either connect to the AX's wireless network or connect directly, using an Ethernet cable, to the Ethernet port of the AX, and then using the AirPort Utility in "Manual Setup" mode, make the following changes:
(Note: As a third option, you can temporarily connect the AXn directly to an available LAN port on your Buffalo wireless router during setup, and then, place it at the desired location when complete.)
AirPort > Base Station
o Base Station Name: <rename or leave default>
o Base Station Password: <enter desired password>
o Verify Password: <re-enter desired password>
o Remember this password in my keychain: (optional)
o Set time automatically: (unchecked)
AirPort > Wireless
o Wireless Mode: Join a wireless network
o Network Name: <existing Buffalo's wireless network>
o Wireless Security: <select the encryption type of the existing wireless network>
o Wireless Password: <enter the existing wireless network password>
o Verify Password: <re-enter the existing wireless network password>
Music
o Enable AirTunes (checked)
o iTunes Speaker Name: <enter desired speaker name>
o iTunes Speaker Password: (optional)
o Verify Password: (optional)
o Click Update to write the new settings to the AX
In iTunes:
iTunes > Preferences... > Advanced > General
o Look for remote speakers connected with AirTunes (checked)

Help setting up airport extreme, clueless here

First off, I just purchased my macbook pro last week and am still getting used to the whole Mac world after having PCs my entire life. Today, I picked up a airport extreme base station to replace my old 2wire gateway. I was told that the extreme needed a DSL modem to work and I just so happend to have kept my old Speedstream 5360 ADSL modem.
This is where I'm totally lost. I have no idea how to set the network up or anything. To help paint a picture, my current set up is this: a Dell desktop connected to the 2wire via an ethernet cable. The 2wire has the DSL phone line in it along with the power cord. Also in the house are two other laptops that connect via wifi. The 2wire was setup by my friend who now lives in another state and I don't know anyone else who is very tech savvy.
So if I understand correctly, the way the new setup would be: DSL phone line into the speedstream, an ethernet cable from speedstream to the WAN port on extreme and then an ethernet cable from extreme to Dell?
Beyond that, I'm totally lost as to what I need to configure on the Dell computer or on the laptops. I tried for an hour or so but can't seem to get the hang of it. PPPoE, bridged, DH-something...all Greek to me. If it helps, I'm using AT&T/SBC.
Any help? Thanks!

try this ..... might help. I used this to set mine up
http://manuals.info.apple.com/en/AirPortExtreme802.11nUserGuide.pdf

Help setting up or discovering a new router

I just purchased a new cisco 881 integrated service router for my small business.
I'm reasonably computer literate, but this is not my speciality and would appreciate some detailed help.
I've already spent the day perusing every lead through the cisco website and made no progress.
I have tried downloading and running the Cisco Configuration Professional CP software but could not get past go.
I hooked up a cable between my computer and the FE0 port, and a cable from the cable internet modem to the FE Wan port.
The first thing CP wants is the ip, which I set to 10.10.10.1 and the username login, which I set to cisco/cisco. It would not connect.
I tried pinging 10.10.10.1 from my command prompt and it got no response. So, I struck out with CP.
I tried hooking up the serial port connection and was able to get some response using hyperterminal.
However, I'm not familiar with the command language or process and the output isn't anything I've seen discussed.
It tells me I can log in one time with cisco/cisco, but must change it. It leaves me at a username# prompt.
I type the command, as I think it wants it username <name> privilege 15 secret 0 <password>, press enter and it tells me
there is an error. I've tried pressing Ctrl-Z instead of enter and get the same error. All other documentation assumes you are at a router# prompt, but I just
can't seem to add a username or get to that point. My hope is that I could set the IP address and a working name/password so that I could get CP to open up.
Once I can get the GUI opened, I'm also hoping I can import my saved configuration file from a Cisco 871 that appears to have been fried through lightening coming through the cable modem connection.
I appreciate if anyone can offer some step by step guidance to get me going.
Thanks,
Rick

I just purchased a new cisco 881 integrated service router for my small business.I'm reasonably computer literate, but this is not my speciality and would appreciate some detailed help.I've already spent the day perusing every lead through the cisco website and made no progress.I have tried downloading and running the Cisco Configuration Professional CP software but could not get past go.I hooked up a cable between my computer and the FE0 port, and a cable from the cable internet modem to the FE Wan port.The
first thing CP wants is the ip, which I set to 10.10.10.1 and the
username login, which I set to cisco/cisco. It would not connect.I tried pinging 10.10.10.1 from my command prompt and it got no response. So, I struck out with CP.I tried hooking up the serial port connection and was able to get some response using hyperterminal.However, I'm not familiar with the command language or process and the output isn't anything I've seen discussed.It tells me I can log in one time with cisco/cisco, but must change it. It leaves me at a username# prompt.I
type the command, as I think it wants it username
privilege 15 secret 0 , press enter and it tells methere
is an error. I've tried pressing Ctrl-Z instead of enter and get the
same error. All other documentation assumes you are at a router#
prompt, but I justcan't seem to add a username or get to that
point. My hope is that I could set the IP address and a working
name/password so that I could get CP to open up. Once
I can get the GUI opened, I'm also hoping I can import my saved
configuration file from a Cisco 871 that appears to have been fried
through lightening coming through the cable modem connection.I appreciate if anyone can offer some step by step guidance to get me going.Thanks,Rick
Rick,
Check out the below link for step by step configuring cisco 881
http://www.cisco.com/en/US/docs/routers/access/cvo/880-870-cvo.html
Hope to help !!
Ganesh.H
Remember to rate the helpful post

Express with no DSL router.

My sons university accomodation broadband will only allow one MAC address to work with his service, he can and has paid to upgrade to a maximum of 5. He has tried using his macbook as a WiFi base station but the provider doesn't allow other devices to allocate IP addresses. We have a spare express he might be able to use if it is able to do what he wants, but for one reason or another we need to know if it will work first rather than trying it.
My thought here is that the ethernet port would be used for the connection with his single ethernet outlet in his room and am not sure whether he would be able to use his AirPort utility wirelessly to configure the express in bridging mode as he seems to need to.
Any ideas guys.

Happy to help.
Unless the school requires that a specific IP address be used to connect to the school network, you should be able to setup the Express at home and test it out for proper operation. Then all that will be needed is to plug into the school network.
Connect the Express to one of the LAN ports on a router and open AirPort Utility to follow the guided setup to "create a wireless network". AirPort Utility will likely automatically choose the Bridge Mode option for you, but in case it does not, select that option when the choice appears. This will allow the school's router to properly identify the devices that will be used on the network.

Need help setting up VPN with OS X Server 2.2

I just bought OS X Server in the hopes that it would be a simpler way to set up VPN for use with my iPhone. I've tried a couple third party VPN configuration tools before with older versions of OSX but was never able to get it working. Now I'm running 10.8.2 and Server 2.2. I've made some progress, but I'm not quite there yet.
Here's what I have set up in the VPN window:
And the user I created:
The User services show that VPN is selected:
I let the Server app configure my Airport Extreme, and it looks like it set up the port mapping:
Here are my iPhone settings
-Server is set to my iMac's public IP address assigned by my ISP
-Password is the password I gave the user account
When I turn the VPN on in the iPhone I get:
"Connecting..."
"Starting..."
"Authenticating..."
then an error:
"VPN Connection
Authentification failed."
What am I missing?
Thanks,
Sean

Hi,
1701
UDP
L2TP
l2f
Mac OS X Server VPN service
1723
TCP
PPTP
pptp
Mac OS X Server VPN service
Try L2TP

Help setting a repository with EMC Fiber storage

Hello
We have a couple of servers running OVM 3.2.2 to setup a test environment. The only common space are 6 LUNS on a EMC CX3-40. I can see the luns with multipath from the servers and available on /dev/mpath
[root@dvmicovm1 bin]# multipath -ll |grep RAID
EMC_ASM05 (3600601601f911900a4250377b5b8e211) dm-5 DGC,RAID 10
EMC_ASM04 (3600601601f9119000ec7e110b9b8e211) dm-3 DGC,RAID 10
EMC_ASM03 (3600601601f91190044870613b5b8e211) dm-4 DGC,RAID 10
EMC_ASM02 (3600601601f91190080abeac9b4b8e211) dm-6 DGC,RAID 10
EMC_ASM01 (3600601601f911900ba6e016bb4b8e211) dm-2 DGC,RAID 10
EMC_OVMstorage (3600601601f9119004e22ab7ab3b8e211) dm-1 DGC,RAID 5
I can't create the clustered pool because i can not see the storage at management level. I tried to create an ocfs2 filesystem, but I can't find a good link explaining the steps to do it with this version at command line. Help is welcome
[root@dvmicovm1 mpath]# mkfs.ocfs2 -Tdatafiles -L EMC_repo -b 4K -C 4K -J size=64M -N16 /dev/mpath/EMC_OVMstoragep1
mkfs.ocfs2 1.8.2
Cluster stack: classic o2cb
Overwriting existing ocfs2 partition.
mkfs.ocfs2: Unable to access cluster service while initializing the cluster
thanks
Ileana

Hi Ileana,
what do you mean by "at management level"? The LUNs need to be presented to the VM servers only, but to each one simultaneously. They need to show up under /dev/mapper, which seems to be the case. However, there seem to be more LUNs visible than there should be… I reckon that the ASM0x LUNs are not supposed to be used by OVM, but seem to be LUNs for some Oracle DB(s), no? If that is the case, I'd suggest to hide them from the OVM servers in the first place.
Then, you'd need at least two LUNs for OVM, one small one, depending on the cluster size, you should be able to get away with 32G max., and another one, that actually gets used as your shared storage repository. This one could be nearly as big , as you like.
So, to be able to create a clustered pool, you'd need to have access to two distinct LUNs from each OVM server. You can check, if each OVM server, has access to the LUNs by choosing the server in OVMM and change the perspective on the right pane to "Physical disks".
I'd also refrain from creating any ocsf2 fs on my own, while setting up the clusteres storage pool, since this will likely lead you into more trouble, since OVM won't overwrite an existing OCFS2 fs, if it finds one on any disk you throw at it and to get rid of the OCFS2 fs, you will like have to manually wipe the LUNs, which always means using dd, which is a program, that one always has to used with extreme caution, especially if there're LUNs available, which under no circumstances, are allowed to be deleted - see your ASM-LUNs…

Setup of Airport with external wireless router?

I've had a Mac Mini since January, its connected via CAT5 to my wireless belkin ADSL router.
Can I buy an airport express and connect to it using my belkin router? The Mini has no wireless capacity, will the software scan the lan/wlan and realise the airport is available via the wired connection?
Thanks

It sounds like you want to configure the Airport Express to wirelessly "join" the network created by your Belkin wireless router. Yes - this can be done with your existing setup. Just follow the instructions provided here by David Lovell, which work equally well with Mac and PC users:
David Lovell, "Airtunes for XP with a Wired/Wireless network" #1, 09:05pm Jan 8, 2005 CDT

Using iBook & AIrport with a Belkin router

Hi Gang,
I have a friend (I'm trying to help him trouble shoot over the phone). Lets call him "Horatio."
He has a Windows tower hooked to a Belkin router which is hooked to his cable modem. He is using Road Runner.
He has an iBook which his school has provided him. He (Horatio) can not get his iBook to connect to the network.
We've read several posts on the boards discussing Belkin, but we can not figure out how to get his iBook into the wireless network.
Thanks for any advice!
Rob (and Horatio)
Powerbook 1Ghz

See KB 106250, Mac OS X, AirPort: Connecting to Third-Party Base Stations.

Need help setting up airport on G3 iMac

Hi All,
Similar issue with an old iMac I bought for my girlfriend on ebay.
Just inserted the wireless card I bought for it. The router is a british (BT Home Hub3) wireless N, the machine is an iMac G3 400Mhz running Panther, I'm guessing the same issue applies to set the router to WEP/WPA as currently I can't see it listed at all so cannot connect?
Many thanks.
Phil
<Edited By Host>

For 10.3 you will be limitted to what browswers you can try. The newest version of Firefox for 10.3 will not surf the web that well. You need to be running Tiger to get a decent port of Firefox... TenFourFox.
I recommend one of these browser for 10.3.
Opera
http://www.opera.com/browser/download/requirements/
http://www.opera.com/download/
OmniWeb 5.11, which, I believe is built on the same framework as Safari 5,
iCab - The Taxi for the Internet
http://www.icab.de/
Some folks have gotten Tiger cds out of Apple. ( some related to what you say. )
AppleCare Support Phone Number: 1-800-275-2273
open 6am to 6pm Pacific Time
Apple Phone Sales 1-800-692-7753
International Technical Support Numbers
http://www.apple.com/support/contact/phone_contacts.html
Robert

Need Help Setting Up Chattermail with AT&T Yahoo Mail Account

Ok... so I've spent half the day trying every possible permutation of my login, server name etc and I STILL can't get Chattermail to successfully log in.
This is a paid Yahoo mail account. The servers I succesfully use for my older 700w were: incoming: pop.sbcglobal.yahoo.com, outgoing: smtp.sbcglobal.yahoo.com
I'm confused by the set up in chattermail. It doesn't have the servers marked as "outgoing" and "incoming" I've put the incoming server name in the "define" tab and the outgoing in the "smtp" tab.
I've tried both my entire email address and just the part before the "@" as my login. I also have the ssl boxes checked because my system seems to be using those.
I cannot get it to work. Does anyone have any ideas?
Post relates to: Centro (Verizon)

Have you checked the Website for Chattermail for help?
WyreNut
Post relates to: Centro (AT&T)
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Help set up AirPort with TTNET DSL router in Turkey

Similar Messages

Maybe you are looking for