Help setting up 3 Monitors with 2 cards

Hello all,
I am having trouble configuring my multi-monitor setup in KDE. I have two nvidia graphics cards (gtx560 and gtx 260). I am using the proprietary nvidia drivers because I game alot on the system. Currently, I run two monitors off the 560 and everything works fine. I have an extra monitor laying around so I tried pluggin it in and tried getting it to work on the 260 card. Unfortanately, I can't get things to work out quite right.
Here is what I have tried so far.
1) Tried xrandr but it doesn't see my new monitor as connected.
2) Used nvidia-settings to configure the setup. I sort of got this setup working. I had to setup the third monitor as a separate x screen, which is fine because I just want it to display various chat applications. Unfortanately, when I got this working it messed up the display on my other two screens. It treats the other two screens as one big screen. Meaning that the wallpaper is spead accross the two screens and if I launch a game, it spreads out accross both screens. Most other applications work fine though.
I read that I need to use mosaic but I haven't been able to get it to work. I've tried enabling it in the nvidia-settings. The arch wiki says that you can't but I saw the option and tried it anyways. I also tried enabling it using the nvidia-xconfig --base-mosaic command. Both methods yielded the same results. When I restart X, the third monitor (one on 260 card) goes black and the other two return to their normal state.
I've tried searching around but I haven't found anything that fixed my problem.
Any help would be much appreciated.

So I've finally had time to mess with this some more. Your suggestion about using 3 separate X-servers got me most of the way to what I want. I'm currently running 3 separate X-servers, this allows me to use all three monitors. I tried to get Xinerama to work but it just crashed my X-server. I checked on the wiki and it says that Xinerama is broken for the latest nvidia drivers. So right now I can't move applications from monitor to monitor. Its not the end of the world but I feel like I should be able to get this working better. Right now the whole setup feels a bit "janky".
Any other suggestions?
Thanks for the help TheAmigo.

Similar Messages

How to set up dual monitors with a Mac Mini

The Mac Mini has only one video output port. I very nearly didn't buy a Mac Mini system because I need to work with two monitors. I use the second monitor to display information in Web pages, PDFs, and Word documents while I am working in the main window.
However, I discovered after quite a bit of Googling that it is possible to set up dual monitors using an inexpensive USB video adapter (about $70).
So I bought my Mini (1.83Ghz, 2GB RAM, 200GB 7200rpm Seagate Momentus), and I also bought a USB video adapter called the EVGA Plus.
I've installed this system and used it now for a week, and I am quite pleased with it. So I thought I'd pass this information along to anyone who's interested. Please note that, although this is my first post to this forum, this isn't spam -- I have no financial relationship with any of the companies mentioned here, other than as a customer.
LINKS
EVGA Plus:
http://www.evga.com/articles/409.asp
Their literature does not mention Mac OS X compatibility. However, the underlying technology is made by Display Link. You can download beta Mac OS X drivers from their site:
Go to Display Link to download the beta Mac OS support -- see
http://www.displaylink.com/macbetadrivers.html
The disk image includes a very well written PDF document that explains the driver's status and limitations.
PICS
My Mac Mini setup, with dual monitors:
http://lh5.ggpht.com/BPfaffenberger/SGV5A7lA2QI/AAAAAAAABMI/CBuR4m3uGRA/IMG_0144 .JPG?imgmax=800
The EVGA+ USB display unit - a tiny little thing - driven by Mac OS beta drivers from Display Link:
http://lh3.ggpht.com/BPfaffenberger/SGV49qpHuQI/AAAAAAAABME/b9wo9TZPJdE/IMG_0143 .JPG?imgmax=800
*MORE INFO*
A thread at 123macmini.com on the same topic, including another user's experiences and MUCH better pictures:
http://www.123macmini.com/forums/viewtopic.php?t=19126&postdays=0&postorder=asc& start=0&sid=5a05cb75b90cab5bbc7dfd16b02632c1
NOTES
* The DisplayLink driver is beta. It doesn't support 2D or 3D accelerated graphics. You can't use it to display iPhoto slide shows, for example. However, I need to be able to display a Web page, document, or PDF in the second monitor while I am working in the first. I've found this solution to be quite acceptable for this purpose.
* Several other companies make USB video units that use the same DisplayLink support, so they should work, too. However, they are more expensive -- largely because they're set up to function as port expanders, I believe. The EVGA Plus was the only unit priced under $100 when I did my search.
* USB does not have very much bandwidth, so you might be surprised that to hear that it's possible to use USB to drive a monitor! You'll find that the display isn't as fast as DVI, but for my purposes, I've found it quite acceptable.
* The EVGA Plus comes with a terrible USB to mini USB cable that will cause all sorts of display problems. Replace it with the type of cable that is used to hook up digital cameras to a USB port.
* Once everything is installed, you can use the Displays in System Preferences (or just click the icon on the menu bar) to adjust the second monitor. You can choose display resolutions (depending on your monitor's ability, of course). Rotation works. You can also right-click the second monitor and choose a different background color or graphic.
Don't expect miracles. Don't go this route if you want to run videos or games in the second monitor. And if you get an EVGA Plus, replace that horrible cable!
I hope this information is helpful.
Bryan

There has been quite a lot of discussion here about driving twin displays with the mini, and more recently about the potential for USB video adapters to facilitate this, particularly in the light of several vendors claiming they have suitable MacOS devices and drivers 'almost ready'.
The DisplayLink solution seems to be the one most suggested as viable, though it's a pity they have not yet been able to move their drivers from beta - I suspect that puts a few people off. It's therefore good to hear of a real-world experience that should help others decide whether or not to go this route!

Help setting up BTinternet email with Apple Mail

Hello everyone,
I need help setting up a btinternet email account with Apple's Mail sofware. I am setting it up on behalf of my aunt and uncles new macbook pro so I hope i get some solutions quick because Im leaving their place by the end of the weekend and I would love to have their email setup and teach them how to use it.
They have 2 btinternet email accounts, the first one they use alot as its their main email account which is currently setup on MS Outlook on their old computer. The secound one they use rarely and its not setup on MS Outlook.
Heres the problem, when I setup their main email account with apple mail, I have no problem creating the account however once created the inbox is empty - it does not load previous emails. It can send emails fine, if i send an email to the account using my personal email it will receive it but when I switch off the computer and switch it back on the mail box is empty. So I checked the email account by going to yahoo.co.uk and signing in - again even on the web page the mail box is empty.
I then setup the second btinternet email account on Apple Mail shockingly this works perfectly all the old emails got loaded up in mail. So how do I do this for the main account, I know the difference is Outlook mail but I rather not delete that because if it doesnt work then they would lose all their old emails.
Please help
Thanks in advance
PS: ive setup my hotmail and yahoo accounts and they all work fine by the way

Please guys give me something or any random ideas u may have. im running out of time.

Help setting up Open DNS with new airport extreme

I cant seem to get Open DNS to work with a new airport extreme. The status says I am not using Open DNS and its not filtering anything. I have followed the exact steps for set up listed on their website, checked the dns settings, cleared both caches and restarted the computer, modem and router with no success. I set the airport up in bridged mode, although I tried the other option under setup, but not sure what I was doing? I picked up this router because I wanted easy set up and the apple store assured me it would work with Open DNS. Oh, and I also downloaded the latest firmware update on the router. Can anyone help me with the settings or what else I need to check?

Sorry, I am not familiar with this product, so I checked online to pick up some information. Here I am referring to the information found here:
http://www.dslreports.com/faq/6096
I found that your device is mentioned as follows in the intro under Section 1 of this document:
The BellSouth supplied Westell 2100, 2200 and 6100 models (Models A90-210030-04, B90-220030-04, and B90-610030-06/C90-610030-06, respectively) share many features and functions.
Next, I am referring to the information under Section 2, under the heading of Standard Default Mode Connection (separate hub or switch present). Unless you have changed the configuration on the Westell, this is how your device is operating. In this mode, the Westell device is acting both as a modem and router in one unit.
So, an attached router (AirPort Extreme) must be configured as a switch to work correctly. That is what Bridge Mode is....the AirPort Extreme is operating as a switch when it is in Bridge Mode (which would be the correct setting to use when the Westell is set to its Standard Default Mode).
Any changes that you want to make regarding DNS settings would need to be made on the Westell device, since it is acting as the main router on your network.
In Bridge Mode, the AirPort Extreme simply passes that information through to its connected devices. You will not be able to make any DNS related changes on the AirPort Extreme since it receives that info from the Westel device. Some service providers force you to use their DNS servers, so you might want to check with Bell South or AT&T for more information in this regard.
If you want to be able to configure the AirPort Extreme as the main router on your network, and instruct it to use the DNS information that you want, you will need to refer to the section under the heading of Bridged Ethernet Mode ( separate router present).
Please note that the first item under this heading specifies that "This is the preferred configuration when using a separate external router..." (which would be the AirPort Extreme in your case)
So, it appears to me that this would be the way that you must reconfigure the Westell device to allow the AirPort Extreme to function as the "main" router on your network. In this type of setup, you will be able to enter the DNS information that you want to use under the setup for the AirPort Extreme and it will act as you instruct.
The AirPort Extreme would not be configured in Bridge Mode for this....it would be configured to "Share a public IP address".
The next item in the article specifies that you "Must use a PPPoE client on the Router." This means that the AirPort Extreme would be configured to Connect Using = PPPoE as follows:
AirPort Utility - Manual Setup
Click the Internet icon
Click the Internet Connection tab
Connect Using = PPPoE
You would enter your user name (probably your email address), password, etc in this area. Leave the Service Area box completely blank. Set Connection to Always On, and Disconnect if Idle to Never
Click Update to save the new settings. Power off the Westell device after this and then restart it so that it will pick up the new information that you have programmed into the AirPort Extreme.
I want to stress that this is how I would try to configure the Westell and AirPort Extreme. But, as I said, have not used a Westell device, so I cannot say that this will work correctly for you.
It might be an excellent idea to contact Bell South or AT&T Support to ask for their opinion on this before you decide to change the configuration of the Westel device and the AirPort Extreme.
This type of thing can be intimidating for users, so you might elect to use the services of someone like the Geek Squad at Best Buy, or a similar service from a local computer firm. Perhaps the Apple store could help as well.
If it is not critical that you use Open DNS, you might want to simply leave things "as is", with the AirPort Extreme in Bridge Mode.

Help setting up linksys E2500 with OSX 10.9.5 - no connection

I just received a new linksys E2500 router to set up with my RCN service.
My MacBook Pro is running OSX 10.9.5 and I know I cant use the linksys connect software to set it up but I am having no luck setting it up manually. Neither my laptop or my phone (iPhone 5S) can see the router when it is plugged in. Trying to connect via 192.168.1.1 doesn't work - says there is no internet connection if wired to router, if hardwired to modem it just spins. (I have tried via Safari, Firefox and Chrome) When I hardwire modem-> computer my internet is fine. but when I connect router to modem and then hardwire from router to computer via ethernet ports, my laptop says nothing is connected via ethernet.
I have a technician from RCN coming later this week, but I really want to get this working sooner. Any help would be appreciated!

MariaVII wrote:
my laptop says nothing is connected via ethernet.
Where did it say that? Network Diagnostics?
First contact your ISP. You need to confirm that the issue is not on their end.
Change your router channel. Sometimes this is all you will have to do.
Power cycling the router. Read the router's user manual or contact their tech support for instructions.
System Preferences/Internet & Network/Network
Unlock the padlock
Locations: Automatic
Highlight Airport
Click the Assist Me button
In the popup window click the Diagnostic button.
System Preferences/Network- Unlock padlock. Highlight Airport. Network Name-select your name. Click on the Advanced button. Airport/Preferred Networks-delete all that is not your network.
Place a check mark next to "Remember networks this computer has joined." Click the OK button and lock the padlock. Restart your computer.
http://support.apple.com/kb/TS1920 Mac OS: How to release and renew a DHCP lease
No internet connection (wireless)
Check to see if an extra entry is present in the DNS Tab for your wireless connection (System Preferences/Network/Airport/Advanced/DNS).
Delete all extra entries that you find.
Place a check mark next to "Remember networks this computer has joined."
Other resources to check into:
Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
Configuring 802.1X in Mac OS X Lion and Later
Non-responsive DNS server or invalid DNS configuration can cause long delay before webpages load
Netspot
How to diagnose and resolve Wi-Fi slow-downs
Pv6 troubleshooting
Mac OS X 10.6 Help: Solving problems with connecting to the Internet
OS X Mountain Lion: Check the status of your network connections
OS X Mountain Lion: Requirements for wireless Internet access
What Affects Wireless Internet?
Solutions for connecting to the Internet, setting up a small network, and troubleshooting
If using one of Apple's Airport routers, read its user manual or post in its forum area. If using a 3rd party router, read its user manual, contact their tech support department/website or post in its forum area. Another possible solution - read mammothsuziq response https://discussions.apple.com/message/22082360#22082360

Help setting up email BB9300 with orange(uk)

Hello,
After my first attempt at setting up email resulted in me bricking my new phone, i thought i would ask for advice here before i attempt it again (on a replacement, thank you orange ).
So, i have upgraded to BBOS6 and everything is working great (browser, facebook, bb msgnr etc.) except i can't get email started, every time i go to email setup it ask me to download an upgrade, fine, but when the upgrade starts a warning flashes up saying that if i continue bb6.11....... will overwrite bb6.000, i thought this would be fine but last time i ended up with a bricked phone, what am i doing wrong? btw if it makes a difference i'm a mac user but have BB desktop installed. Tnx Joe

Anyone help???

Help setting up wireless network with Verizon DSL

I bought a MacBook Pro and an Air Port Extreme yesterday. I have an iMAC G5 from October 2004. I have Verizon DSL service and a Westell Series 6100 modem.
Bottom line --> I can't get the wireless connection to work.
I have successfully used a wired dsl connection with my iMAC G5. But, I tried to just disconnect the ethernet cable from my computer and put it into the Airport Extreme and that didn't work. I used the utility to set up the base station and the network, but I'm not sure if I did it properly.
I know a PPPoE is involved but I'm not sure of how to configure the system properly. I'm also not sure if the problem is with the configuration of the AirPort extreme or with my Verizon modem.
All I know is that I want to see a green light on that thing and not a flashing orange one.
Does any one have some instructions for setting up your AirPort Extreme using Verizon DSL? Has anyone else had similar problems? Thanks in advance!
MacBook Pro & iMAC G% Mac OS X (10.4.9)

Just finished solving this problem. I am not a strong tech guy, but I know that since it works for others it is just a question of poking and pushing. Anyway it was nine hours in the making...
My snow airport working with an airport express had been bullet proof with verizon dsl for a couple of years. I wanted to upgrade since I am now Intel mac and hit the blinking amber light.
I am only going to be able to give the big picture... The AEBS found and worked with all my computers from the beginning, so the problem became that the default IP Address and Subnet Mask were wrong and never automatically adjusted by the assistants.
Take your working plug-in ethernet connections or the working snow connections from the Airport Utility Internet Connect page. I used the manual configure process to access the info screens.
I copied all the numbers down, but I believe you only have to insert the IP Address, Subnet Mask, Router Address and DNS servers. I put "dsl.verizon.net" in the domain search box.
Go up to the IPv4 pull down menu and select manual and put in the numbers you copied. Then click Update. When the software returns control, the AEBS will still be orange.
Toggle the IPv4 to "using DHCP" Click Update.
This should bring the green light.
I think I then updated the Network Preference Pane, probably had to manually put in my wireless password again. Browser and mail program worked.
I think that was all. I may have had to repeat the toggle to make it stick, but I am operational for the last several hours, including the airport express, a G4 laptop and a Sony PC.
Hope this helps.
Rpbert

Need help setting up a network with new Airport Extreme

Hey All I need some help. Networks, Wan, WPA it's all greek to me. Here's what I am trying to do, I have a newer imac, an ipod touch, a apple TV and the kids have a laptop running on Vista. I have a DSL internet connection through Verizon with a Westell VersaLink Model 327W router. I disabled the wireless option on the versalink and hooked the Ethernet cable from the versalink to my Airport extreme. I am trying to figure out how to set things up so I can restrict the kids laptop from the internet after say 9pm but allow everything else unlimited access. I've read other posts and the manual but can't figure it out. When I turn the Airport off Bridge mode i get a bunch of errors re DHCP beginning and ending addresses and have no clue how to set this up. Before I spend hours on the phone with tech support I figured someone out there may be able to help. This can't be to difficult or is it?

rmunoz274 wrote:
I had to call Verizon and spend an hour on the phone, my Versalink is about 3 years old and I never updated it. There is a software update which makes it a little more mac friendly. Cables still run through it on the Ethernet port. I was able to turn the wireless feature off on the Versalink (to stop my neighbors and kids from bypassing the APE and just factory reset the APE and set it up with a shared IP adrs instead of bridging it. Also made sure I turned off the guest network on the APE. Once it was set up I clicked on Airport in the Airport Utility then wireless Clinets, jotted down the client I wanted to restrict access to (Kid's Laptop) then go back to Airport screen, last option on right Access then MAC Adrs Access Control change to "Timed Access", then click the + on the bottom of the window, type the MAC adrs you want to restrict and set time limits, when complete click done..... Only took me a week and a half to figure it out...... Good luck, if that doesn't help let me know, but I'm no expert...
thanks!!
i think i have the most recent 327w update, because it now shows my modem screen in a red color and it is broken into 3 sections across the screen.
as far as the AEBS is concerned, you did not use it in bridge mode at all?
i thought you had to connect 1 cable from it to the 327w? I have about 5 items i will be connecting, so i will probably run any wired from the AESB, but not sure yet?
thanks, and yaeh last time my network took me a bit of time as well!!
what kind of encryption are you running?
thanks

Need help setting up WiFi - Xfinity with Network Switch, Time Capsule, Airport Express and Apple TV

Hello - I recently got Comcast Xfinity service. We had switched from a different service. Our wifi service was never great, but prior to Xfinity, it worked decently. But now that we have Xfinity, our wifi is much worse and very unreliable. I am seeking advice on how to setup my various Apple wifi devices in my home. I have attached a diagram that illustrates what I am dealing with. We have a large old house with stone walls. Comcast does not support this issue.
To explain the attached diagram, we have a total of 4 levels in our house - an unfinished basement, 1st floor, 2nd floor, and 3rd floor. The Xfinity router is in the basement and it is connected to a NetGear 10/100 network switch. I already have ethernet cables running from the network switch in the basement to various locations throughout the house. So I have ethernet connected to my time capsule and ethernet connected to each of my 3 Airport express devices. The dark lines running from the network switch to the various devices represents ethernet cable.
The immediate problem that we are having is that we are unable to connect to our wifi networks. The networks show on my mac laptop and my iPhone, for example, but I am unable to connect. I know that I am inputting the correct password, but most of the time, we cannot get in. Sometimes we can..... Very frustrating! Also, due to the fact that I setup what I have over several years, I have multiple network names. I once tried to fix that issue, but was unable to tackle it due to my lack of understanding.
Here is what I am looking to accomplish:
1. Seamless wifi access throughout our house.
2. One name for our wifi network. Right now we have multiple names for multiple networks. Just want to simplify and have only one network. (I guess that an additional "guest network" would be ok, but not absolutely necessary.
Also, if you think I should disable the Xfinity wifi, and just rely on my mac wifi devices, I am perfectly fine with this. Just tell me how to do so.
I have no idea how where to start or how to set this up. I imagine that I would need to disconnect everything and reset and start from scratch? Can someone tell me what I should do? Even general advice would be helpful, but the more specific, the better, given my limited understanding. Any help or advice would be greatly appreciated.
Thanks in advance!

Your photo link is not working. Click on the camera icon to load an image. (Shorten the name of the file to something like WifiNetwork.jpg)
Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Need help setting up web server with WRT54GS

Hello,
I am trying to set up a web server with my linksys router. For the network settings, I have used 192.168.001.150 as my primary IP (192.168.1.150, all 3 numerical characters have to be filled in), 255.255.255.000 as my primary netmask and 192.168.001.001 (192.168.1.1) as my gateway. I have gone into my router and then enabled port fowarding for port 80 to 192.168.1.150 but I still cannot access my web server. What could be the problem?
Any help would be greatly appreciated. I'm trying to set up this server so I can test scripts and things.

bump

How set up alert Monitor with available to promise profile?!

Gurus,
I read a lot of notes about alert profile but I ´ve been in doubt.
I set the monitor alert in /sapapo/amon1:
- Selected alert type
- Selected some products and my allocation
- Assigned alert profile - defined the bucket
Check instruction:
- Activated "ATP Alert Act."
I vent seen any place to assign my alert profile in /sapapo/bop. Is it possible or necessary?
When I redetermine the alerts for my profile in /sapapo/amon1 any alerts are showed.
I don´t want to use macros to create alert.
I created a scenary to see an alert:
My scenary
Availability: 100
Order confirmed: 100
I changed my orders to 50.
Availability: 50
Order confirmed: 100
Execute alert monitor
Result: No warning
I´m glad for your attention...
Best Regards!

Thiago,
http://help.sap.com/bp_scmv250/BBLibrary/HTML/S21_EN_DE.htm
Best Regards,
DB49

Need help setting up eyeHome - Wireless with AX

Hi all,
I am trying to setup eyeHome over a wireless connection using Aiport Xtreme.
I have no problem connecting to the internet through AX and my D-Link ethernet modem (thanks to Apple Support), works perfectly.
But when I try and add eyeHome to this equation everything seems to stop working and I have to reset my AX and start all over again.
The problem seems to occur when I setup try to set up WDS over, I get an error about not being able to configure the base. Elgato's (eyeHome's makers) instructions on how to setup the device arent clear.
Please help me out on this. Cheers.

A little confused actually. Why does D-Link DSL- 300T have to support WDS, when it is the wireless adapter provided by Elgato which is having problems being configured. The setup is as follows?
WITHOUT ELGATO WIRELESS ADAPTOR ATTACHED:
ADSL LINE --via rj cable----> DLINK MODEM
DLINK MODEM ---via ethernet cable----> AIRPORT EXPRESS
AIRPORT EXPRESS - ----> iMac G5
WITH ELGATO WIRELESS ADAPTOR ATTACHED:
ADSL LINE --via rj cable----> DLINK MODEM
DLINK MODEM ---via ethernet cable----> AIRPORT EXPRESS
AIRPORT EXPRESS - ----> iMac G5
EYEHOME BOX ----via scart----->TV
WIRELESS ADAPTOR----via elgato's ethernet cable---> EYEHOME BOX
EYEHOME BOX---communicates via WIRELESS ADAPTOR through AX--->iMac
Hope this makes sense

Help setting up Aiport Express with a non BT broadband service

Just bought a MacBook with Airport Express and am having trouble connecting to the net.
I've got a green light on my Express unit but when I try to configure it I can't see a Connect Using PPPoA setting which my ISP says I need, they claim the PPPoE is just for BT. Do I need to switch ISP or is there another way to connect up?
Thx

Do you have a DSL Modem with an ethernet port?
The Airport Express does not include a DSL modem and does not support PPPoA.
iFelix

Just bought new time capsule- need help setting up WiFi network with another router

Here ismy situation.
I had a wireless network setup up at home using a Belkin wifi router.
I have 2 macBooks (1 pro, 1 air) and 2 iphones that connect wirelessly and a desktop PC that is hard wired to the ethernet port. In addition, I have a Verizon wireless network extender plugged in by ethernet. All of the hard-wired gear is in our 3rd floor attic office (and the wireless signal was strong throughout the house).
The Belkin wifi router was plugged into a wall ethernet jack that is in turn wired into a Linksys router in the basement (along with multiple other ethernet ports througout the house) and is hardwired to the Cable modem next to it. All of the hard-wired ethernet stuff (including the router in the basement) was there when we bought the house, and I have no clue in the tangle of wires how to sort them out (but don't really think I need to)
I just purchased a TimeCapsule to do wireless backups of my 2 macbooks, and tried to set it up alongside the existing wireless modem.
Needless to say, this did not work well. I called AppleCare, and was told that the TimeCapsule needs to be the "1st" wireless adapter, so I went into the basement, and connected the time capsule directly to the cable modem, and then out to the basement router. The Belkin router still needs to be in the attic to supply the PC and the Verizon adapter (so it is near a window for GPS signal).
If I try to name the WiFi network the same SSID on both the TC and the belkin router (to have dual signal strenth coverage) the whole thing gets messed up and the TC cannot be "found" by the aiprort Utility software.
What I have done now is that I have 2 side-by-side wireless networks with 2 unique names (actually 3, because I enabled the 5Ghz signal on the TC), but our wireless devices do not "switch" automatically from one SSID to another stronger signal SSID as we move through the house
Here's the question: How do I name them the same so that the devices will switch effortlessly to the stongest signal? I understand it involves switching the "channels" but don't know how to do it right now. Currently, everything works, so I don't want to mess it up tinkering. Another caveat- there are several other wireless networks from neighbors houses that I can "see". I jsut downloaded a program called iStumbler that shows the channels, but not sure what to do with that info.
Any advice would be appreciated.

Here's the question: How do I name them the same so that the devices will switch effortlessly to the stongest signal? I understand it involves switching the "channels" but don't know how to do it right now. Currently, everything works, so I don't want to mess it up tinkering. Another caveat- there are several other wireless networks from neighbors houses that I can "see". I jsut downloaded a program called iStumbler that shows the channels, but not sure what to do with that info.
Any advice would be appreciated.
OK.. sounds like a mess.. or at least messy and the previous people should have left a log book with all the IP address info in it.. you have far too many routers.. but from here it is impossible to tell how they are configured. Most are probably just setup as AP.
Naming rule for wireless.. Same SSID same security different channel.
SSID ie wireless name to work on the PC side should have no spaces and no special characters. TC name should also follow that rule. So the devices need to all set with fixed channels.
Don't worry too much about iStumbler and what is outside your house.. there isn't enough channels at 2.4ghz anyway. And you are going to need to use them all. There are only three non-overlapping channels. 1, 6, 11 so set each device to one of those channels. The TC should be as close as you can to where you normally use the MacBooks.. and turn on the 5ghz. You will have to leave it to automatic name so the Macbook can also roam across from 2.4 to 5ghz. But if you care to use a different name and force it onto 5ghz the speed is much better as long as you are in the same room.
Roaming is great in theory.. often in practice it just doesn't work.. you need to step in and turn off wireless and then turn it back on.. you can quickly see which router it is connecting to by hold down the option key when you click the airport fan in the top menu area.. and look at bssid.. you will have to figure out which number MAC address relates to which router.
Also do not be surprised if Lion gives you issues. It seems to often drop out and lose connection to the TC as a backup device even if internet is still working.

I need help setting up file sharing with my MBP and a PC

i have been trying to set up file sharing so I can move files on my windows PC (music, pic's, office, pdf, etc..) to my new MBP. I followed all the directions, but still cannot see the MBP on the PC. I had it working a few days ago by setting up the workgroup function. but now, nothing. it will not show up in Windows Explorer. Just trying to move files into Dropbox. Help!! thanks.

i have been trying to set up file sharing so I can move files on my windows PC (music, pic's, office, pdf, etc..) to my new MBP. I followed all the directions, but still cannot see the MBP on the PC. I had it working a few days ago by setting up the workgroup function. but now, nothing. it will not show up in Windows Explorer. Just trying to move files into Dropbox. Help!! thanks.

Help setting up 3 Monitors with 2 cards

Similar Messages

Maybe you are looking for