Help setting up a billion 8800nl for BT infinity f...

Hi , having had a whole host of intermittent problems with my HH5 and a new replacement being just as much trouble .I sent for the above router , only i have a problem working out what username password I should be using , its been years since I first got broadband with BT and all of the modems and routers I have had have allways connected without asking for any user/pass info . I do have the original password and username I set up with BT years ago , but when I tried it ,the router is still not connecting although it does not say that the pass/user info is wrong .
does anyone here have an idiots guide for setting this router up to connect to BT and run 2 PC's (ethernet only)

http://support.billion.com/_Internet/qsg/BiPAC-8800NL-QSGEN.pdf
If you found this post helpful, please click on the star on the left
If not, I'll try again

Similar Messages

I need help setting up an apple id for my sons phone. It seems his email address has been taken and/or we cant get the password.

I need help setting up an apple id for my son's phone. It seems his email address has been taken and/or we cant get the password.

Two different things
If you forgot the password
If you forgot your Apple ID password - Apple Support
If the email ID you want to use is in use by someone else - then you may need a new one
The iCloud ID's are usually unique and may be of help if you set one up

Need help setting up rows and columns for a shop page in DW

I sell my books and design tees on my site. I'm trying to set up a new page for a new site.
For some reason I can't get my products in a row and column fashion.
I have a attachment file so you can see what I actually mean. thanks to all that will give advice.

Use a table for your product catalog.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb
www.alt-web.blogspot.com

Need help setting up external hard drive for FCE project

Hi folks,
Basically I am looking at making a 20-30 minute video this summer of my motocross adventures and what not and have equipped myself with an iMac (2.93 GHZ Core2Duo 640GB 4GB) and of course, FCE. I have tried smaller projects before (ranging in length between 20 seconds to upwards of a few minutes) but have noticed an overall decline in computer speed which I am under the impression is being caused by the 10s of GBs of video project files and what not that seem to be scrawled away within my computer. Before I made any videos, my computer was sitting around 560 GBs of free space. Since making maybe 3-4 videos (50/50 iMovie and FCE) its down below 400GBs. I'm not sure whether it's the raw video files or the projects themselves that are so large, but it's slightly frustrating. Is there any sort of software (either third party or apple) that can look at your hard drive and tell you exactly where all the biggest files are? I'll post this question in the iMac forum as I realize this is for FCE, but I thought if anyone knew of one it would be extremely helpful.
Anyways, I have a SimpleDrive 320GB external HD that I plan to use as my external for making this project within FCE and would like some help in terms of how to set it up with FCE, what are the best settings etc. It is currently formatted with Windows, so I will also need help in setting it up for a Mac. I do have about 120GBs used on it already and was also wondering if I could keep this when re-formatting, but I'm pretty sure I already know the answer to that.
Sorry for the long-winded post; any information on this or something related would be fantastic. Thanks.

Yes, you can use your external HD with FCE ... provided it is formatted as +Mac OS Extended+ and is connected via FireWire.
You will need to back up any data that is on the drive that you want to keep. Before reformatting it. Formatting erases everything that is on the drive.
Use Disk Utility (located in your +Applications > Utilities+ folder) to format the drive.
After formatting the drive, go into +FCE > System Settings+ and change your FCE scratch disk location to the external drive.

Help setting up my tv settings for game mode xbox 360

I recently bought a Panny 50" plasma (G20). If anyone could help me out and let me know what the best settings are or what you personally have set up for gaming on your Xbox 360 I would greatly appreciate it! Trying to calibrate my tv and would greatly appreciate some opinions on what you have your tv claibrated at....thanks
Solved!
Go to Solution.

I would check out this thread over at AVS. The settings listed in that thread and this thread are great places to start.

HT204053 Help setting up Find my iPhone for iPod touch!

I'm trying to set up "Find my iPhone" app for my 5th generation iPod touch. When I follow steps, it says my Apple ID is correct but I don't have an icloud account. I actually do and have it on & running on my iPod! Help! What do I do to get past this?

I reset icloud password-that seemed to do the trick.

Help Setting Up A Cisco Lab For IOS Upgrade?

Hi.
I've collected quite a few routers and switches over the past few months that have what seems to be corrupted or no IOS. I have a small lab set up to test parts, and I was wondering how I can network them in such a way where I have an active functional network (for testing purposes, not for actual internet use), that I can connect routers or switches to and upgrade or change the IOS version.
I have all the hardware and cabling needed, and I have the Cisco IOS software for the routers I need, I've just never upgraded or changed an IOS on a router or switch before.
I have:
a Cisco 7505 with an RSP4+, 256MB RAM, 16MB Flash, and it's full of the modules that hold the PA cards (I forget what it's called, but I just use it to throw PA cards in to test 8 at a time).
A Cisco 3450 (I believe, 3400 series anyhow) that I believe is 64/16, that again I use for testing.
Two Cisco 2621 64/16, for testing WIC's, VWIC's and NM's.
Two Cisco 2950 series switches, one I'd like to use to actually connect to my LAN already implimented seperatly, and one to connect to this mini lab LAN.
So again, I'm wondering how I can set these up on a small LAN just for testing purposes and so I can just connect a device and upgrade it's IOS. I also need information about the TFTP server and all of that as I haven't been able to find out much info on it.
Thanks in advance for any help :).

Hi
First of all make sure that the flash is enough for IOS you are loading.Here is guide for loading IOS.
(1)Download and install tftp server from www.solarwinds.net
(2)Give IP on ethernet port of router
(3)Give IP on computer which should be in same subnet that of router
(4)Follow the following steps:
Router#copy tftp: flash:
Address or name of remote host []? 192.168.1.67
Source filename []? c1700-k9o3sy7-mz.122-15.T9.bin
Destination filename [c1700-k9o3sy7-mz.122-15.T9.bin]?
Accessing tftp://192.168.1.67/c1700-k9o3sy7-mz.122-15.T9.bin...
Erase flash: before copying? [confirm]
Erasing the flash filesystem will remove all files! Continue? [confirm]
Erasing device... eeeeeeeeeeeeeeeeeeeeeeeeeeeeeee ...erased
Erase of flash: complete
Loading c1700-k9o3sy7-mz.122-15.T9.bin from 192.168.1.67 (via FastEthernet0): !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
[OK - 9190488/18380800 bytes]
Verifying checksum... OK (0xF7C5)
9190488 bytes copied in 129.664 secs (71244 bytes/sec)
(5)Reboot and your new IOS is ready.
Regards
JD

Help setting up a Laserjet P1102w for wireless printing on a Mac

I'm trying to setup a Laserjet P1102w on my Mac for wireless printing, but it's not working. It will print fine using USB, but all the documentation for wireless setup is for Windows, not Mac. if I connect the printer via USB to my Mac, how will it get an IP address from my wireless network? Any help appreciated.

Hi Staxofjoy,
Based on the information you provided, and comparing to another post regarding this issue (link below) - It sounds like you are running 10.7 (Lion).
http://h30434.www3.hp.com/t5/Mac-Printing-and-Scanning/HP-Laserjet-P1102w-driver-for-Macbook-OS-X-Li...
Please go to the linked thread above, and look for the post by mikel1004 - he outlined the steps for connecting Adhoc to the printer very clearly.
Summary of what you will need to to:
1. Reset Printer to Defaults
2. Connect to printer via Adhoc from your Mac (This will disconnect you from your home wireless network)
3. Access HTML Config, and configure the printer's wireless settings manually from there.
4. Reconnect the Mac to the Home Network
5. Add the printer to the print queue.
Hope this helps
I am an HP Employee
Click the KUDOS Star to say "Thanks"
Please mark the post that solves your problem as "Accepted Solution"

Help Setting up Mac Mini Server for Printer/File Sharing to Windows comp.

Hi, so in our office, we decided only to switch half of the office to macs for budgetary reasons. We purchased the mac mini server to replace the 5,000 year old one and have also gotten to macbooks and a mac mini. My other two co-workers unfortunately still are using two windows vista machines. We have important documents on the server hard drive and they also need our OLD ACT! database to access from it and I have not been able to get them to access the hard drive. Can someone please walk me through these steps? Also, ideally we want to be able to access this servers hard drive when we are out of the office and edit word documents and such, but I also have not been able to do that or make that work. Any help in these areas would be greatly appreciated!

If you use a different login name for the network account to your existing local account then the local account will not be affected. You might want to transfer the contents of your existing local account to the new network account. To do this you could try the following
Create new network account
Login using old local account
Now while logged in using old local account - connect to the File Server
Enter the new login details
It should hopefully list the Share that stores your new network account, complete the connection
You should now have the Share mounted, copy the contents of your local account to the corresponding location in your new network account
Note: The Library folder in your home directory contains all your settings
Once complete logout of the old local account
Try logging in to the new account
In terms of limitations, it is going to be slower than a local account because it has to go across the network, and some badly written applications may have some issues but most will be fine.
At this stage your local account has not yet been deleted so if you have problems you can revert to it.

Help setting up sounds effect page for ipad

Hello,
For the past few years I've maintained a fun webpage (made in DW) that plays sounds on click. I use it to accent certain moments in my class and sometimes I run several sounds at once to create a mood during stories. This year our students are using ipad's and this sound page does not work the same way. It does not play certain sounds, and opens others (wav, mp4 on a separate page) one at a time. Here is a sample line of code that works on Macbooks, but will not play at all on ipads.
Here is the code:
<embed name="CS1345392109055" src="rimshot.mp4" loop="false" autostart="false" hidden="true" width="0" height="0" enablejavascript="true"></embed>
Found on this page: http://gr8writers.com/soundtest2.html
It plays on a laptop, but no sound on an ipad.
This next sound plays, but opens up a separate page - also not what I need to happen:
<embed name="CS1345400314623" src="creepyorgan.mp4" loop="False" autostart="False" hidden="True" width="0" height="0 enablejavascript="true"></embed>
Found on this page: http://gr8writers.com/soundtest2.html
What I need to be able to do is have these sounds play on click without opening a separate window. Thanks if you can help!

Use an HTML5 doc type with the <audio> player tags.
<html>
<head>
<meta charset="utf-8">
<title>HTML5 Audio Demo</title>

</head>
<body>
<p>This works in all modern browsers.
The .ogg file type supports Mozilla and Gecko browsers.
MP3 audio is supported by the rest.</p>
<audio controls>
<source src="path/yourSong.ogg" type="audio/ogg">
<source src="path/yourSong.mp3" type="audio/mp3">
</audio>
</body>
</html>
Nancy O.

Need help setting up approval workflow step for PO and Shopping Cart

Hello,
We are on SRM 7.0 and setup BRF and process level config for automatic approvals of SCs and POs using task 40007988. We would now like to test approval based workflow (create work item to route to approver) using a process level step.
1) Is there a standard task that can be used to enter in the process level step? Or should we create a new standard task? If a new task is required, what import/export parameters should be defined?
2) How do we setup agent for this step? Are the entries u201CResp Resolveru201D and u201CResp Resolver Parameteru201D in process level config required? The BADI BD_WF_RESP_RESOLVER already has some SAP delivered implementations? Should I create a new implementation here?
Thanks,
Zack

Hi,
Welcome to new Process-Controlled Workflow implementation in SRM 70.
You can find the task list in the transaction PFTC. Task Group 40000003.
Please activate the BC Sets in transaction SCPR20. Find the BC Sets /sapsrm/*.
Regards,
Masa

Help setting up Aelfred and SAX for MIDP

This relates to chapter 11 & 12 of Yu Feng book Wireless Java Programming with J2Me.
Where exactly do you install Aelfred and Sax? What variables have to be set in the class path or what jar files have to be placed where.
I can't compile my application because the class files that come with Aelfred can't find java.io.*; from the import Statement in the class file.
The above class file is located in the4 SRC directory of my application.

I've just realised that you have to manually remove some stuff from the classes such as reference to J2Se classes.
How do you do this.

Need help setting up Mac OSX Server for remote/off-site access

Hello, I want to be able to access our g5 tower running Mac OSX Server 10.5.8 remotely when not in the office. We have a static IP.
Are there easy step-by-step directions someone could provide or point me to? Thanks a bunch.

Hi
its really easy
You need to have Apple remote desktop
there are bunch of software s like chichen vnc and etc.
01. open your router from your web browser
02. go to nat settings
03. screch the option calld port forwading
04. enter the server ip address to that
05. save and restart the router
** What you did so far
if some one want to connect from your static ip address now it will forwerd to your server. *******
Go to system preferences (on server)
go to sharing
enable remote management
select opetions which you want
your done
2nd part Adding Computer to ARD
Select All Computer ----> click plus button and select add by address
put the Address : ip address
user name : server User name
password : server password
eureka
now you done

HOW TO?: Need help setting up 3 different iCloud accounts for my kids (so each has own iMessanger)using same Apple ID (mine) ....they don't have their own separate email addresses to work from...how do I do this?

Need help setting up 3 different iCloud accounts for my kids (so each has own iMessanger)using same Apple ID (mine) ....they don't have their own separate email addresses to work from...how do I do this?

Any devices connected to the same icloud account can sync all the data on that account. For this reason an icloud account is really for a single user.
On a mac, if each user has their own account, then the itunes for that mac account should be set up to connect to that user's icloud account (System preferences>icloud).

Help Please. I am setting up my macbook pro for a second user but office didn't transfer over. Is there a way to have additional users on the same comp have office available without having to re-install it for each user?

Help Please. I am setting up my macbook pro for a second user but office didn't transfer over. Is there a way to have additional users on the same comp have office available without having to re-install it for each user?

mpr130 wrote:
Help Please. I am setting up my macbook pro for a second user but office didn't transfer over. Is there a way to have additional users on the same comp have office available without having to re-install it for each user?
How did you attemp to transfer Office?
OS X Lion: Set up a guest account

Help setting up a billion 8800nl for BT infinity f...

Similar Messages

Maybe you are looking for