Help setting up smtp for outlook 2011

Outgoing mail is not connecting to server any ideas?

You are comparing two quite different concepts, you may want to look at the following articles.
Family Sharing and Apple IDs for kids
Understanding Home Sharing
iTunes Match

Similar Messages

Spotlight Plugin for Outlook 2011 available?

Hello,
does anyone know if there is a Spotlight Plugin for Outlook 2011? Now I can't preview the messages if they come up in a search. Google, the Apple and the Microsoft website do not seem to contain any information on this.
Kind Regards,
Edwin

This plug-in is fine, but it works only if Outlook is running.
I have both Mac Mail and Outllook 2011 installed on my MacBook and I was going crazy because Spotlight shows by default the Outllook mails in the result list - and they can't be properly previewed.
To disable Outllook mails in Spotlight results, just add the "Microsoft User Data" folder (which lies in your Documents folder) to Spotlight's "Privacy" section.
Spotlight will now show mails as Mac Mail in the result list an you'll be able to preview them.
Of course your Exchange account(s) need to be proprerly set up in Mac Mail.
Hope that helps.

Schedule for Outlook 2011 calendar sync?

Hi
Has anyone seen a schedule for Outlook 2011 to sync calendars with iPhone?
If you were thinking of getting the version of Office for MAC that has Outlook 2011 you might want to hold off for while.
It seems Microsoft left it that bit out...
thanks for any scuttlebut on this...
Clive

I'm having the same issues. Can't sync iphone with Outlook 2011 calendars nor can I sync with google calendar. I switched from ical and apple mail because Outlook offers a better user experience. But not being able to synch with mobile me or iphone is crippling. When will they fix this?

Need Help Converting a VBA Macro to AppleScript 2.1.2 for Outlook 2011

Hello AppleScript Experts:
Can somebody help me convert the below VBA Macro to an equivalent AppleScript 2.1.2 for Mac Outlook 2011 (Version 14.1.3)
I have a VBA macro program that pops message box when somebody sends an email to an external email address outside of the business domain name. I have deployed the below on WINDOWS 7 MS OFFICE OUTLOOK 2007/2010 and it's
working successfully.
I have few users using MAC Outlook 2011 v.14.0.1 & 14.1.3. I need to deploy the same application for MAC users.
Here is the program...
Private Sub Application_ItemSend(ByVal Item As Object, Cancel As Boolean)
Dim objRecipient As Outlook.Recipient
Dim strExternalEmailAddress As String
Dim strInternalEmailAddress As String
Dim oRecip As Outlook.Recipient
Dim oEU As Outlook.ExchangeUser
Dim oEDL As Outlook.ExchangeDistributionList
Set objRecipients = Item.Recipients
strTemp = ""
For Each objRecipient In objRecipients
    Set oRecip = Application.Session.CreateRecipient(objRecipient.Address)
    If InStr(1, oRecip, "@") > 0 And InStr(1, oRecip, "company.org") = 0 Then
        strExternalEmailAddress = strExternalEmailAddress & objRecipient.AddressEntry & " - " & objRecipient.Address & "; "
        strExternalEmailAddress = strExternalEmailAddress & vbCrLf
    Else
        oRecip.Resolve
        If oRecip.Resolved Then
            Select Case oRecip.AddressEntry.AddressEntryUserType
                Case OlAddressEntryUserType.olExchangeUserAddressEntry
                    Set oEU = oRecip.AddressEntry.GetExchangeUser
                    If Not (oEU Is Nothing) Then
                    End If
                Case OlAddressEntryUserType.olExchangeDistributionListAddressEntry
                    Set oEDL = oRecip.AddressEntry.GetExchangeDistributionList
                    If Not (oEDL Is Nothing) Then
                    End If
                Case Else
                    If (objRecipient.Type = 1) And InStr(1, oRecip, "company.org") = 0 Then
                        strExternalEmailAddress = strExternalEmailAddress & objRecipient.AddressEntry & " - " & oRecip & "; "
                        strExternalEmailAddress = strExternalEmailAddress & vbCrLf
                    ElseIf (objRecipient.Type = 1) And InStr(1, oRecip, "company.org") <> 0 Then
                        strInternalEmailAddress = strInternalEmailAddress & objRecipient.AddressEntry & " - " & oRecip & "; "
                        strInternalEmailAddress = strInternalEmailAddress & vbCrLf
                    ElseIf (objRecipient.Type = 2) And InStr(1, oRecip, "company.org") = 0 Then
                        strExternalEmailAddress = strExternalEmailAddress & objRecipient.AddressEntry & " - " & oRecip & "; "
                        strExternalEmailAddress = strExternalEmailAddress & vbCrLf
                    ElseIf (objRecipient.Type = 2) And InStr(1, oRecip, "company.org") <> 0 Then
                        strInternalEmailAddress = strInternalEmailAddress & objRecipient.AddressEntry & " - " & oRecip & "; "
                        strInternalEmailAddress = strInternalEmailAddress & vbCrLf
                    End If
            End Select
        Else
            If InStr(1, oRecip, "@") > 0 And InStr(1, oRecip, "company.org") = 0 Then
                strExternalEmailAddress = strExternalEmailAddress & objRecipient.AddressEntry & " - " & objRecipient.Address & "; "
                strExternalEmailAddress = strExternalEmailAddress & vbCrLf
            ElseIf InStr(1, oRecip, "@") > 0 And InStr(1, oRecip, "company.org") <> 0 Then
                strInternalEmailAddress = strInternalEmailAddress & objRecipient.AddressEntry & " - " & objRecipient.Address & "; "
                strInternalEmailAddress = strInternalEmailAddress & vbCrLf
            End If
        End If
    End If
Next
If Len(strExternalEmailAddress) > 0 Then
    If MsgBox("You are about to send this email message to one or more individuals outside of COMPANY. Before you send the message," & _
    " please review the list below and confirm that you have addressed the message to the intended recipients." & vbCrLf & strExternalEmailAddress & vbCrLf & _     "Please click 'Yes' to send the message or 'No' to make changes to the recipients.", vbYesNo + vbDefaultButton2) = vbNo Then
        Cancel = True
    End If
End If
End Sub

Hello AppleScript Experts:
Can somebody help me convert the below VBA Macro to an equivalent AppleScript 2.1.2 for Mac Outlook 2011 (Version 14.1.3)
I have a VBA macro program that pops message box when somebody sends an email to an external email address outside of the business domain name. I have deployed the below on WINDOWS 7 MS OFFICE OUTLOOK 2007/2010 and it's
working successfully.
I have few users using MAC Outlook 2011 v.14.0.1 & 14.1.3. I need to deploy the same application for MAC users.
Here is the program...
Private Sub Application_ItemSend(ByVal Item As Object, Cancel As Boolean)
Dim objRecipient As Outlook.Recipient
Dim strExternalEmailAddress As String
Dim strInternalEmailAddress As String
Dim oRecip As Outlook.Recipient
Dim oEU As Outlook.ExchangeUser
Dim oEDL As Outlook.ExchangeDistributionList
Set objRecipients = Item.Recipients
strTemp = ""
For Each objRecipient In objRecipients
    Set oRecip = Application.Session.CreateRecipient(objRecipient.Address)
    If InStr(1, oRecip, "@") > 0 And InStr(1, oRecip, "company.org") = 0 Then
        strExternalEmailAddress = strExternalEmailAddress & objRecipient.AddressEntry & " - " & objRecipient.Address & "; "
        strExternalEmailAddress = strExternalEmailAddress & vbCrLf
    Else
        oRecip.Resolve
        If oRecip.Resolved Then
            Select Case oRecip.AddressEntry.AddressEntryUserType
                Case OlAddressEntryUserType.olExchangeUserAddressEntry
                    Set oEU = oRecip.AddressEntry.GetExchangeUser
                    If Not (oEU Is Nothing) Then
                    End If
                Case OlAddressEntryUserType.olExchangeDistributionListAddressEntry
                    Set oEDL = oRecip.AddressEntry.GetExchangeDistributionList
                    If Not (oEDL Is Nothing) Then
                    End If
                Case Else
                    If (objRecipient.Type = 1) And InStr(1, oRecip, "company.org") = 0 Then
                        strExternalEmailAddress = strExternalEmailAddress & objRecipient.AddressEntry & " - " & oRecip & "; "
                        strExternalEmailAddress = strExternalEmailAddress & vbCrLf
                    ElseIf (objRecipient.Type = 1) And InStr(1, oRecip, "company.org") <> 0 Then
                        strInternalEmailAddress = strInternalEmailAddress & objRecipient.AddressEntry & " - " & oRecip & "; "
                        strInternalEmailAddress = strInternalEmailAddress & vbCrLf
                    ElseIf (objRecipient.Type = 2) And InStr(1, oRecip, "company.org") = 0 Then
                        strExternalEmailAddress = strExternalEmailAddress & objRecipient.AddressEntry & " - " & oRecip & "; "
                        strExternalEmailAddress = strExternalEmailAddress & vbCrLf
                    ElseIf (objRecipient.Type = 2) And InStr(1, oRecip, "company.org") <> 0 Then
                        strInternalEmailAddress = strInternalEmailAddress & objRecipient.AddressEntry & " - " & oRecip & "; "
                        strInternalEmailAddress = strInternalEmailAddress & vbCrLf
                    End If
            End Select
        Else
            If InStr(1, oRecip, "@") > 0 And InStr(1, oRecip, "company.org") = 0 Then
                strExternalEmailAddress = strExternalEmailAddress & objRecipient.AddressEntry & " - " & objRecipient.Address & "; "
                strExternalEmailAddress = strExternalEmailAddress & vbCrLf
            ElseIf InStr(1, oRecip, "@") > 0 And InStr(1, oRecip, "company.org") <> 0 Then
                strInternalEmailAddress = strInternalEmailAddress & objRecipient.AddressEntry & " - " & objRecipient.Address & "; "
                strInternalEmailAddress = strInternalEmailAddress & vbCrLf
            End If
        End If
    End If
Next
If Len(strExternalEmailAddress) > 0 Then
    If MsgBox("You are about to send this email message to one or more individuals outside of COMPANY. Before you send the message," & _
    " please review the list below and confirm that you have addressed the message to the intended recipients." & vbCrLf & strExternalEmailAddress & vbCrLf & _     "Please click 'Yes' to send the message or 'No' to make changes to the recipients.", vbYesNo + vbDefaultButton2) = vbNo Then
        Cancel = True
    End If
End If
End Sub

AppleScript for Outlook 2011

I'm writing a script for sending same e-mail to several contacts in Outlook 2011 for Mac Contacts database. Basically, I select several Contacts and then run this script that should create and save individual personalized messages to each of the selected contacts.
Cant' figure out how to extract e-mail address as a text/string value in the line starting with "set to_email_address to __" to use it further in the line starting with "make new to recipient at.."
Previously I used similar script for Entourage, but after shifting to 2011 I had to re-work it, but still can't make it working!
Hope for your help!
set theSubjectLine to "test subj"
set messageBody to "test message body"
tell application "Microsoft Outlook"
    set theContacts to selected objects
    repeat with aContact in theContacts
        tell aContact
            set exportList to {first name, last name, email addresses}
        end tell
        set to_f_name to (item 1 of exportList)
        set to_email_address to _________???__________
    try
         set theMsg to make new outgoing message at outbox with properties {subject:theSubjectLine, content:messageBody}
            make new to recipient at theMsg with properties {email address:{name:to_f_name, address:to_email_address}, type:to recipient type}
            move theMsg to mail folder "Drafts" of pop account "XXXXX"
    end try
    end repeat
end tell

I wrote a script to perform email-merges using Outlook or Mail/Address Book: https://github.com/craibuc/applescript-email-merge. Perhaps you will find it useful.

Need help setting up file for program Ai CS5 Mac

Hello everyone, I am hoping you can help me with something. I am having a 20 page conference program printed through a 3rd party company.The printer sent me back the proof today and on almost every page my artwork is being chopped off.
This is the email sent with the proof today:
" I want you to look at these spreads and tell me if this is how you visualized your finished pages? A lot of your art is being cut off. The finished size is 11x17. You sent pages that were 9x12, so I used them at 100% on the 12x18 press sheet. You only need to provide a 1/8" bleed, not a 1/2". You also have bleeds on the centers of the spreads. Those should not have a bleed. Only the outside 3 edges should bleed.
I had trouble getting all of the art to line up."
Printer Info:
They print on 12/18 trimmed down to 11 x 17 (for full bleed)
Requested bleed: 1/8
They print out of Quark
I was told I can send them individual PDFs and they will paginate them (in order and add page numbers)
I created a file in Ai CS5 with 20 artboards (one for each page of the program) Now, the trim marks should be placed at 1 inch because they are trimming 1 inch from the top and 1 inch from the bottom. The bleed should be 1/8 so 0.125 on the 3 "outside" edges. Is this correct?
I primarily do lay-outs, the person responsible for this project bailed last minute so I am a bit stuck. If I am designing it as individual pages what are the exactly dimensions, bleed, and trim marks needed for each page to be set up correctly for the printer to paginate. Should I also add a .5 margin along the edges as a safe zone or is that not necessary because of the bleed?
Let me know if I didn't provide enough information. I appreciate any help I can get. Thanks in advance!
-d

It is often just simpler to build your pages (or spreads) to the actual size of the press sheet.
I'll assume this is a saddle-stitched booklet.
The press sheets will be 12 x 18 inches.
It will be printed, then, as 11 x 17 printer spreads.
That means it will have a half inch (not a whole inch) between the trims and the press sheet edges on all four sides.
There will be three-eights inch between the bleed and the edges.
(This is crowding things a tad; typically one tries to allow at least a half-inch gripper margin.)
Anyway....
1. Setup the document with twenty 9x12 vertical Artboards, with zero spacing, in two columns. Zero Bleed.
(Often, depending on the nature of the content, I would choose to build such a thing as ten 12 x 18 Artboards, with content already arranged as printing spreads, thus eliminating the need for stripping. But in the following, you'll go ahead and make 20 separate Artboards, abutted in pairs, and treat these as two-page reader spreads, to make layout easy, and to accommodate artwork that may jump the gutter.)
2. Turn on Show Grid. Turn on Snap To Grid.
Rectangle Tool: Click the page. In the dialog, specify a 17 x 11 rectangle. This corresponds to your trim.
Rectangle Tool: Click the page. In the dialog, specify a 17.25 x 11.25 rectangle. This corresponds to your bleed.
Center align the two rectangles to each other, both horizontally and vertically.
3. Zoom in. White Pointer: Snap the upper left corner of the rectangles to the grid at .375 H and .375 V of the top left Artboard.
4. Convert the two rectangles to Guides. (View>Guides>Make)
5. Line Tool: Snapping to the grid, draw your own trim marks at each corner, outboard of the trim. Use .25 pt. stroke weight. Registration color.
6. Unlock Guides. (turn off View>Guides>Lock)
7. Black Pointer: Marquee select around all the trim marks and the two rectangluar Guides.
DoubleClick the Black Pointer. In the resulting Move dialog, enter a vertical movement of 12" and click copy.
Transform Again (Ctrl D) 8 times.
Now you have a set of trim guides, bleed guides, and trim marks on all 10 two-page reader spreads.
8. Create the content as if the pairs of Artboards are facing pages of reader spreads. The top pair are the front and back. The other pairs are sequentially-numbered reading speads. Set up this way, your artwork can jump the gutter when desired. You can put other printer's marks (sep names, etc.) in the bleed area if needed.
9. Save A Copy to PDF with Use Artboards checked. The resulting PDF will contain 9x12 vertical pages. Viewed as spreads in Acrobat, you can see that the pages align.
10. But when they are printed, they will be stripped into two-page printing spreads, ordered like so:
JET

How to preview the first 4 lines of an unopened email in my inbox for outlook 2011 for mac

how to turn on email preview in outlook 2011 for mac.
I had this done in outlook for PC but can't find how to do it on the mac.

Hi,
As far as I know, the message preview feature is not available in Outlook 2011 for Mac. Since this forum is for general questions and feedback related to Outlook for Windows, you can post a question in the Outlook for Mac forum to confirm this:
http://answers.microsoft.com/en-us/mac/forum/macoutlook?tab=Threads
Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Unable to add POP Account for Outlook 2011 for Mac.

Hi, I have bought the Outlook 2011 for Mac recently, but I am unable to add an account for my email
Here is what I did:
Tools > Accounts> (a window pops out) > click "Email Account" and the thing just froze.
Tried restarting and reinstalling.. but does not work.
However, when I tried clicking "Exchange account" a window requesting email information slides down, which is what I need to setup my POP account!!!

Hi, I have bought the Outlook 2011 for Mac recently, but I am unable to add an account for my email
This forum is for Windows based Outlook. Suggest you post the question to the Mac based Outlook forum for quicker/relevant responses to your question
Office for Mac (Outlook)
http://answers.microsoft.com/en-us/mac/forum/macoffice2011-macoutlook?sort=lastreplydate&dir=desc&tab=Threads&status=&mod=&modAge=&advFil=&postedAfter=&postedBefore=&threadType=All&tm=1416101390880
Karl Timmermans [Outlook MVP] "Outlook Contact Import/Export/Data Mgmt" http://www.contactgenie.com

Help with installing Office for Mac 2011 when I do not have the disks on another machine

I have a purchased legal version of Office for Mac 2011 on my personal laptop, and I just purchased one for the house (kids). I do not have the original product key. How do I get it registered so I can download a version to install on the laptop?
I have also logged in (or created accounts) with my two e-mail addresses, but it says neither is associated with Office. I am not sure what to do. Thx!!

Hi,
This forum is to discuss problems of Office development such as VBA, VSTO, Apps for Office .etc. But I find your question is related to the installing of Office for Mac 2011. So I suggest you posting it in Office
for Mac support for more effective responses.
Thanks.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Help setting up sharing for music playlists family sharing vs home sharing

how do I set up sharing for music playlists for my iPad ios8 and sister new iPad.
previous set up was home share between our macs. Now want to share with iPads added to the mix
does family share offer playlist sharing
how does (or not) match come into the set up
please clarify home sharing. Family sharing and the use of match
what is the best set up for me. If I use family share do I sign out of home share

You are comparing two quite different concepts, you may want to look at the following articles.
Family Sharing and Apple IDs for kids
Understanding Home Sharing
iTunes Match

Help with AppleScript for outlook 2011

I wonder if anyone can help me with what I think should be a simply script.
I simply want to sweep(move) all of my incoming mail in Outlook to a specified IMAP folder.
Is this possible - it seems like it should be an easy script - if you get me started with the outline (for select all in incoming box and the move to an imap folder command) I think I can sort it.
Many thanks!
Gordon

I wrote a script to perform email-merges using Outlook or Mail/Address Book: https://github.com/craibuc/applescript-email-merge. Perhaps you will find it useful.

Runtime Error when setting sync parameters for Outlook - what to do?

In Desktop Manager, I configure Synchronization to use with Outlook so I can pull my calendar onto the Blackberry. It lets me set it up and then gives me a Runtime Error - Cannot find system in table file. I have Comcast email setup in Outlook, but previously had used Outlook Express when I bought the Blackberry. Could this be part of the problem and if so, how do I fix it?
Thanks for any help you can offer...

This bug should be fixed in SDK 4.5. Please use the latest SDK.
My environment is FlashBuilder 4.5 premium and its default SDK 4.5. It's all right on my machine.
Thanks

Please help set up my work outlook account on my iphone 4

i have been trying to do this for a long time to no avail!
i have set this up on my iphone and can receive emails sent to my work outlook address fine. However i cannot send any. can someone please please advise me on how to set it all up properly so that i can receive and send emails via my outlook account.
it keeps telling me that the recipient has been rejected by the server. Ideally a step by step guide (or dummies guide if u like! ) would be brilliant.
thanks in advance to anyone who can help

i would ask them if we had one! lol. this is my problem, i need to somehow work it out?????

Need help setting up MoCa for superior speed for upstair room in house

Hey guys i need some help. I just upgraded my plan to the 50/20 Fios and now i really want that speed upstairs to my gameroom. Before i had the 10/2 plan where wireless was sufficient (i could get 9mpbs download speed wirelessly everywhere i needed internet using the mi424wr)
But now this crappy (no offense ) router is just not sufficient for the 50mbps download speed. Even if my laptop is RIGHT NEXT to the router, i only get max speed of 20 - 23mpbs download. Whereas if im connected via ethernet, i get the full 50+Mbps download speed. For some reason the upload speed is fine at over 20mpbs. (Anyone has any explanation for this? If other 2.4ghz devices were causing interferences, shouldnt the upload speed be affected also?) And Yes, i have changed the channel to 11 (every other wifi network is on 6)
I also have this hawking high gain antenna connected to the router: http://www.newegg.com/Product/Product.aspx?Item=N82E16833164156
In any case i feel that MoCa would be a much cheaper and more reliable approach to achieve better speeds compared to buying a wireless n dual band router & adapter
Currently i have the ONT connect to the WAN Router VIA Coax
I also have Dish network for Tv services with the STB upstairs (same room where i want the Ethernet from MoCa to connect to PC,PS3). Not sure if relevent, but the dish is set up so that my downstair tv has acces to Dish tv VIA the coax connected to the STB upstairs. So ONE STB provides TV upstairs AND TV downstairs with dish services via Coax.
From the various articles i have read, this is my understanding of what i should do but of course im a newbie so i need your suggestions. I should add splitter the coax coming out of the ONT and connect one split to the router and the other split to the wall? then upstairs add a splitter to the coax connection from the wall and split one for dish STB and split one for MoCa actiontec which will then be connect to the internet and i could run ethernet from MoCa actiontec to ps3 and PC.
Is that anywhere even close to a working solution or im just dreaming that it would this easy? lol
Thanks for all the help!

mominn8266 wrote:
The actiontec router is b/g mode only and I've changed it from mixed to g only. I wish they had upgraded my router with the services but nope still have the crappy actiontec router.
If you read my post I've already changed the channel most appropriate for me.
I've also read that post about interferences but if im literally ONE feet away from the router, I should atleast get above 40 mbps download speed. Why is my upload speed above 20mbps but Download speed can't exceed 23mbps?
Is there a possible solution for moca to coexist with dish services? A special splitter to seperate both lines? Or is powerline my only option?
Keep in mind, with Wireless you're limited by the fact that it is also a Half Duplex connection by design (can only send OR receive on a radio, can't do both like you can on Full Duplex Wired connections) which reduces speeds, and also protocol overhead which increases as you add additional devices to an access point.and increase traffic in a broad scale. So, if you're getting 22-25Mbps on Wireless G, that's about all you're going to get from it. 54Mbps is a theoretical limit with the assumption you've cut down all overhead, have a full duplex connection and are not encountering noise.
I recall seeing something on DSLReports about using MoCa with a Satellite TV provider, and it involved a lot of filtering within the coaxial to work. Ideally, you're best using a dedicated line for Coaxial if you're going to use MoCa to cut down on the complexity and risks caused by using a satellite system's coax.
========
The first to bring me 1Gbps Fiber for $30/m wins!

Help setting up router for wireless printer

I recently purchased a wireless printer - but haven't been able to connect to the router. Router is a Linksys wireless G 2.4ghz w/ SecureEasySetup (SES). When I activate the SES button on the router - it will connect with the printer - but the router then re sets itself, my SSID changes to the Linksys default and I loose internet connection.
How can I use SES without the router resetting?

I assume that your wireless printer does not have SES.
When you use SES, the router resets the wireless settings. SES is designed to be used when both devices (router and wireless adapter) both have the SES feature. If only one device has the SES feature, then you cannot use the SES button, and the non-SES device must be setup manually.
Login to your router at 192.168.1.1, and write down the following settings on a piece of paper:
SSID
encryption type (probably WPA)
encryption key (sometimes called Password or Passphrase)
Next, follow the installation procedure for your wireless printer. At some point in the install procedure, it will ask you for the above info.
If you need more help, please state the model and version of your router. Also, please state the make and model of your printer.
Message Edited by toomanydonuts on 04-07-2008 12:25 AM

Help setting up smtp for outlook 2011

Similar Messages

Maybe you are looking for