Help setting up static ip for minecraft server with TC and PC

Hey guys,
I have a dell xps laptop and a son that is hooked on minecraft. I have promised him that I would let him set up a server so he and his buddies can play together. I would really appreciate some assistance on doing this on my time capsual. I have been searching for the solution but could only find references to doing this with a Mac, not a PC.
Could anyone point in the right direction? I afraid I am in a little over my head. Thanks in advance!!
Zippy

>Does that mean that the range on the IPV4 local network page should be modified to exclude the IP address that I want to use for the static IP....
e.g. change the range from 1-255 to 1-200 and then use an IP of XXX.XXX.X.201 for instance
That's right.
You want to reserve static IP addresses in a range that does not overlap with the range that is allocated for generic DHCP clients. For example, you can define the DHCP pool to be 50~149, and reserved IP addresses to be 2~49 (for servers).

Similar Messages

"it's always DNS" - Need Help setting network/DNS settings for MacMini Serv

Well, I must admit defeat and ask for help. I've set up an Xsan or 2, but for the life of me cannot set up my mac mini server. My basic two problems seem to be these:
1) Service Order in System Preferences/Network
I want to run my private LAN through Ethernet, using a 10.1.17. IP range, and use my Airport Extreme Base Station (Technically a Time Capsule) for the Public ISP 192.168.1 DHCP service. Cannot get both to work. The only way I can get the server to work and to be able to login using Open Directory is to either set the Ethernet as Primary for both my client and server, in which case there is no internet service AT ALL for either. I have a sneaking suspicion it has something to do with either DNS or a few extra DNS entries in the ethernet or airport categories, but for the life of me I cannot find the right combination. Is there any way to have BOTH Ethernet LAN and Airport internet service?
2) Related to the first question, I think, is that my local FQDN (not registered, just meant for internal LAN use only right now) and DNS name only show up to my client computer in Server Admin, Directory Utility, Workgroup Manager if I DISABLE my airport card. Otherwise, they come up as <servername>.local and not the FQDN <servername>.editdog.com, and I cannot login using OD.
3) I'm not sure what happend to the Binding I used to have to do in OSX Server 10.5, but maybe that's the issue? I have the Peachpit OSX Server Essentials Book, and it's been less than helpful.
Any ideas out there?

bump

Need help setting up static NAT to internal server

One of my internal servers requires it to be available to the internet I am having a hard time allowing it to be NATed through my Ciscc 2801 router. It seems as though im missing something small. From what I can gather it seems as though its as issue with ACL, but im not sure. I have ran the following command: ip nat inside source static tcp 192.168.5.1 ***WAN IP Address*** 8443 extendable Then I tried to add it to the ACL
via this command: access-list 150 permit tcp any host ***WAN IP Address*** eq 8443
Here is a copy of my config. Please advise. Thanks.
IP    172.19.3.x
sub 255.255.255.128
GW 172.19.3.129
Ciscso 2801 Router
Current configuration : 11858 bytes
version 12.4
service timestamps debug datetime localtime
service timestamps log datetime localtime show-timezone
service password-encryption
hostname router-2801
boot-start-marker
boot-end-marker
logging message-counter syslog
logging buffered 4096
aaa new-model
aaa authentication login userauthen group radius local
aaa authorization network groupauthor local
aaa session-id common
clock timezone est -5
clock summer-time zone recurring last Sun Mar 2:00 1 Sun Nov 2:00
dot11 syslog
ip source-route
ip dhcp excluded-address 172.19.3.129 172.19.3.149
ip dhcp excluded-address 172.19.10.1 172.19.10.253
ip dhcp excluded-address 172.19.3.140
ip dhcp ping timeout 900
ip dhcp pool DHCP
   network 172.19.3.128 255.255.255.128
   default-router 172.19.3.129
   domain-name domain.local
   netbios-name-server 172.19.3.7
   option 66 ascii 172.19.3.225
   dns-server 172.19.3.140 208.67.220.220 208.67.222.222
ip dhcp pool VoiceDHCP
   network 172.19.10.0 255.255.255.0
   default-router 172.19.10.1
   dns-server 208.67.220.220 8.8.8.8
   option 66 ascii 172.19.10.2
   lease 2
ip cef
ip inspect name SDM_LOW cuseeme
ip inspect name SDM_LOW dns
ip inspect name SDM_LOW ftp
ip inspect name SDM_LOW h323
ip inspect name SDM_LOW https
ip inspect name SDM_LOW icmp
ip inspect name SDM_LOW imap
ip inspect name SDM_LOW pop3
ip inspect name SDM_LOW netshow
ip inspect name SDM_LOW rcmd
ip inspect name SDM_LOW realaudio
ip inspect name SDM_LOW rtsp
ip inspect name SDM_LOW esmtp
ip inspect name SDM_LOW sqlnet
ip inspect name SDM_LOW streamworks
ip inspect name SDM_LOW tftp
ip inspect name SDM_LOW tcp
ip inspect name SDM_LOW udp
ip inspect name SDM_LOW vdolive
no ip domain lookup
ip domain name domain.local
multilink bundle-name authenticated
key chain key1
key 1
   key-string 7 06040033484B1B484557
crypto pki trustpoint TP-self-signed-3448656681
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-3448bb6681
revocation-check none
rsakeypair TP-self-signed-344bbb56681
crypto pki certificate chain TP-self-signed-3448656681
certificate self-signed 01
3082024F
            quit
username admin privilege 15 password 7 F55
archive
log config
hidekeys
crypto isakmp policy 10
encr 3des
hash md5
authentication pre-share
group 2
crypto isakmp key XXXXX address 209.118.0.1
crypto isakmp key xxxxx address SITE B Public IP
crypto isakmp keepalive 40 5
crypto isakmp nat keepalive 20
crypto isakmp client configuration group IISVPN
key 1nsur3m3
dns 172.19.3.140
wins 172.19.3.140
domain domain.local
pool VPN_Pool
acl 198
crypto isakmp profile IISVPNClient
   description VPN clients profile
   match identity group IISVPN
   client authentication list userauthen
   isakmp authorization list groupauthor
   client configuration address respond
crypto ipsec transform-set myset esp-3des esp-md5-hmac
crypto dynamic-map Dynamic 5
set transform-set myset
set isakmp-profile IISVPNClient
qos pre-classify
crypto map VPN 10 ipsec-isakmp
set peer 209.118.0.1
set peer SITE B Public IP
set transform-set myset
match address 101
qos pre-classify
crypto map VPN 65535 ipsec-isakmp dynamic Dynamic
track 123 ip sla 1 reachability
delay down 15 up 10
class-map match-any VoiceTraffic
match protocol rtp audio
match protocol h323
match protocol rtcp
match access-group name VOIP
match protocol sip
class-map match-any RDP
match access-group 199
policy-map QOS
class VoiceTraffic
    bandwidth 512
class RDP
    bandwidth 768
policy-map MainQOS
class class-default
    shape average 1500000
service-policy QOS
interface FastEthernet0/0
description $ETH-LAN$$ETH-SW-LAUNCH$$INTF-INFO-FE 0$$FW_INSIDE$
ip address 172.19.3.129 255.255.255.128
ip access-group 100 in
ip inspect SDM_LOW in
ip nat inside
ip virtual-reassembly
duplex auto
speed auto
interface FastEthernet0/0.10
description $ETH-VoiceVLAN$$
encapsulation dot1Q 10
ip address 172.19.10.1 255.255.255.0
ip inspect SDM_LOW in
ip nat inside
ip virtual-reassembly
interface FastEthernet0/1
description "Comcast"
ip address PUB IP 255.255.255.248
ip access-group 102 in
ip inspect SDM_LOW out
ip nat outside
ip virtual-reassembly
duplex auto
speed auto
crypto map VPN
interface Serial0/1/0
description "Verizon LEC Circuit ID: w0w13908 Site ID: U276420-1"
bandwidth 1536
no ip address
encapsulation frame-relay IETF
frame-relay lmi-type ansi
interface Serial0/1/0.1 point-to-point
bandwidth 1536
ip address 152.000.000.18 255.255.255.252
ip access-group 102 in
ip verify unicast reverse-path
ip inspect SDM_LOW out
ip nat outside
ip virtual-reassembly
frame-relay interface-dlci 500 IETF
crypto map VPN
service-policy output MainQOS
interface Serial0/2/0
description "PAETEC 46.HCGS.788446.CV (Verizon ID) / 46.HCGS.3 (PAETEC ID)"
ip address 123.252.123.102 255.255.255.252
ip access-group 102 in
ip inspect SDM_LOW out
ip nat outside
ip virtual-reassembly
encapsulation ppp
crypto map VPN
service-policy output MainQOS
ip local pool VPN_Pool 172.20.3.130 172.20.3.254
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 50.00.000.110 track 123
ip route 0.0.0.0 0.0.0.0 111.252.237.000 254
ip route 122.112.197.20 255.255.255.255 209.252.237.101
ip route 208.67.220.220 255.255.255.255 50.78.233.110
no ip http server
no ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
ip flow-top-talkers
top 20
sort-by bytes
ip nat inside source route-map COMCAST interface FastEthernet0/1 overload
ip nat inside source route-map PAETEC interface Serial0/2/0 overload
ip nat inside source route-map VERIZON interface Serial0/1/0.1 overload
ip nat inside source static tcp 172.19.3.140 21 PUB IP 21 extendable
ip access-list extended VOIP
permit ip 172.20.3.0 0.0.0.127 host 172.19.3.190
permit ip host 172.19.3.190 172.20.3.0 0.0.0.127
ip radius source-interface FastEthernet0/0
ip sla 1
icmp-echo 000.67.220.220 source-interface FastEthernet0/1
timeout 10000
frequency 15
ip sla schedule 1 life forever start-time now
access-list 23 permit 172.19.3.0 0.0.0.127
access-list 23 permit 172.19.3.128 0.0.0.127
access-list 23 permit 173.189.251.192 0.0.0.63
access-list 23 permit 107.0.197.0 0.0.0.63
access-list 23 permit 173.163.157.32 0.0.0.15
access-list 23 permit 72.55.33.0 0.0.0.255
access-list 23 permit 172.19.5.0 0.0.0.63
access-list 100 remark "Outgoing Traffic"
access-list 100 deny   ip 67.128.87.156 0.0.0.3 any
access-list 100 deny   ip host 255.255.255.255 any
access-list 100 deny   ip 127.0.0.0 0.255.255.255 any
access-list 100 permit tcp host 172.19.3.190 any eq smtp
access-list 100 permit tcp host 172.19.3.137 any eq smtp
access-list 100 permit tcp any host 66.251.35.131 eq smtp
access-list 100 permit tcp any host 173.201.193.101 eq smtp
access-list 100 permit ip any any
access-list 100 permit tcp any any eq ftp
access-list 101 remark "Interesting VPN Traffic"
access-list 101 permit ip 172.19.3.128 0.0.0.127 172.19.3.0 0.0.0.127
access-list 101 permit ip 172.20.3.128 0.0.0.127 172.19.3.0 0.0.0.127
access-list 101 permit ip 172.19.3.128 0.0.0.127 host 172.19.250.10
access-list 101 permit ip 172.19.3.128 0.0.0.127 host 172.19.250.11
access-list 101 permit tcp any any eq ftp
access-list 101 permit tcp any any eq ftp-data
access-list 102 remark "Inbound Access"
access-list 102 permit udp any host 152.179.53.18 eq non500-isakmp
access-list 102 permit udp any host 152.179.53.18 eq isakmp
access-list 102 permit esp any host 152.179.53.18
access-list 102 permit ahp any host 152.179.53.18
access-list 102 permit udp any host 209.000.000.102 eq non500-isakmp
access-list 102 permit udp any host 209.000.000.102 eq isakmp
access-list 102 permit esp any host 209.000.000.102
access-list 102 permit ahp any host 209.000.000.102
access-list 102 permit udp any host PUB IP eq non500-isakmp
access-list 102 permit udp any host PUB IP eq isakmp
access-list 102 permit esp any host PUB IP
access-list 102 permit ahp any host PUB IP
access-list 102 permit ip 72.55.33.0 0.0.0.255 any
access-list 102 permit ip 107.0.197.0 0.0.0.63 any
access-list 102 deny   ip 172.19.3.128 0.0.0.127 any
access-list 102 permit icmp any any echo-reply
access-list 102 permit icmp any any time-exceeded
access-list 102 permit icmp any any unreachable
access-list 102 permit icmp any any
access-list 102 deny   ip any any log
access-list 102 permit tcp any host 172.19.3.140 eq ftp
access-list 102 permit tcp any host 172.19.3.140 eq ftp-data established
access-list 102 permit udp any host SITE B Public IP eq non500-isakmp
access-list 102 permit udp any host SITE B Public IP eq isakmp
access-list 102 permit esp any host SITE B Public IP
access-list 102 permit ahp any host SITE B Public IP
access-list    102 permit tcp any host public ip eq 8443
access-list 110 remark "Outbound NAT Rule"
access-list 110 remark "Deny VPN Traffic NAT"
access-list 110 deny   ip 172.19.3.128 0.0.0.127 172.19.3.0 0.0.0.127
access-list 110 deny   ip 172.19.3.128 0.0.0.127 172.19.10.0 0.0.0.255
access-list 110 deny   ip 172.19.10.0 0.0.0.255 172.19.3.128 0.0.0.127
access-list 110 deny   ip 172.20.3.128 0.0.0.127 172.19.3.0 0.0.0.127
access-list 110 deny   ip 172.19.3.128 0.0.0.127 172.20.3.128 0.0.0.127
access-list 110 deny   ip 172.19.3.128 0.0.0.127 host 172.19.250.11
access-list 110 deny   ip 172.19.3.128 0.0.0.127 host 172.19.250.10
access-list 110 permit ip 172.19.3.128 0.0.0.127 any
access-list 110 permit ip 172.19.10.0 0.0.0.255 any
access-list 198 remark "Networks for IISVPN Client"
access-list 198 permit ip 172.19.3.0 0.0.0.127 172.20.3.128 0.0.0.127
access-list 198 permit ip 172.19.3.128 0.0.0.127 172.20.3.128 0.0.0.127
access-list 199 permit tcp any any eq 3389
route-map PAETEC permit 10
match ip address 110
match interface Serial0/2/0
route-map COMCAST permit 10
match ip address 110
match interface FastEthernet0/1
route-map VERIZON permit 10
match ip address 110
match interface Serial0/1/0.1
snmp-server community 123 RO
radius-server host 172.19.3.7 auth-port 1645 acct-port 1646 key 7 000000000000000
control-plane
line con 0
line aux 0
line vty 0 4
access-class 23 in
privilege level 15
transport input telnet ssh
line vty 5 15
access-class 23 in
privilege level 15
transport input telnet ssh
scheduler allocate 20000 1000
ntp server 128.118.25.3
ntp server 217.150.242.8
end

If you are planning to use the fa0/1 interface IP itself then the configuration would be:
ip nat inside source static tcp 172.19.3.133 8443 interface fa0/1 8443 extendable
Assuming that you would like to port forward TCP/8443.
Then the ACL should be written:
ip access-list extended 102
2 permit tcp any host eq 8443

My 4th generation iPod Touch won't let me get on to the App Store. When I log on to iTunes, an alert pops up that says the certificate for the server is invalid, and that it may be a server pretending to be iTunes. What should I do?

My iPod won't let me on to the App Store, and whenever I go on to ITunes, an alert pops up that the certificate for the server is invalid, and that I may be connecting to a server that is only pretending to be iTunes.apple.com and my personal info may be at risk. I downloaded an emulator yesterday from coolroms.com but deleted the app this afternoon. I cleared my safari search data, my cookies and data, and web inspector, which still didn't work. I then proceeded to reset my iPod and then download the newest version of IOS 6.1.5 but yet still am having problems. Also to the App Store and iTunes, several other apps aren't working. Any help here?

Also, when I go on to safari, another alert pops up that safari cannot verify the identity of the website, anything that I type in to as common as google.com. It gives me 3 options to either cancel, look at details, and continue. I've looked at the details of the website of Google and it is legitimate the site. Any help?

Do we need CALS for windows server 2008 R2 and 2012 R2 if 2008 R2 is just a stepping stone?

We currently have a server on Windows Server 2008 RC SP2 64-bit with approximately 20 clients.
We want to upgrade to Windows server 2012 R2 but first need to upgrade to Windows 2008 R2 to allow us to do a straight upgrade.
Is it possible to upgrade to Windows Server 2008 R2 with the 5 CAL's included and then upgradeto 2012 R2 and install 20 new CAL's and keep all users accounts and domain PC's the same?

Ok sorry for using the wrong terminology... I was under the impression for each client (Computer) connecting to the server we will need a CAL (Client Activation License) in order for the computer to be a domain PC on the server. Do I need 20 CALS's
for Windows Server 2008 R2 and then another for Windows Server 2012 R2 if we are only upgrading to 2008 R2 to be able to upgrade to 2012 R2 without having to do a clean install.
For WindowsServer (Standard edition or Enterprise edition or DataCenter edition), a Client Access License (CAL) is required for each device (if you're using the per-Device CAL licensing method), or, is required for each user (if you're using the per-User
CAL licensing method).
(whether you use per-Device, or per-User, is up to you, it comes down to cost).
CALs are version-specific (to a point) - i.e. if you purchased WS2008 CALs for your 20 devices, for use with your WS2008 server, and you are now upgrading that server to WS2012, you need to upgrade your CALs.
If you are adding a second server which is WS2012, and you are keeping your WS2008 server, you need to upgrade your CALs (because you only purchased WS2008 CALs which don't grant you the rights to connect to the newer server).
If you were to install your second server as WS2008, you wouldn't need to purchase additional CALs, because as long as the version is the same, a single CAL grant you access to unlimited server (of the same version).
CALs can be tricky to correctly license.
Here's some introductory reading:
http://www.microsoft.com/licensing/about-licensing/client-access-license.aspx#tab=1
And, none of this relates to the technical aspects of product installation/configuration at all (e.g. clean install vs. upgrade).
Windows Server CALs are not license keys/tokens/files which you install/load/download - Windows Server CALs are quite literally paper-based (just like a drivers license or car registration). You are required to have them, to be correctly licensed, but, you
don't physically do anything with them to own/drive a car.
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

TS3376 I had my iphone set up to be tracked as registered with iCloud and it had been using it for a year one day it said no devices registered and stopped working why???

I had my iphone set up to be tracked as registered with iCloud and it had been using it for a year today it said no devices registered and stopped working even though i tracked the selected iphone 4 device an hour earlier why did it do this???

So basically the phone I was tracking was working an hour earlier it had no signal at times when it did pick up a signal it located it easily but an hour later the message came up no devices registered when my friend returned home I Checked the device I was tracking to make sure find my iphone was on but it was off and my friend didnt turn it off so my question is why did it turn itself off???
Confused?

HT5622 my i pad said the certificate for this server is invalid and said that it may be concted to a fake site. how do i fix it?

my ipad sait that the certificate for this server is invaled and i may be on a fake site how can i fix this

What server? What were you connecting to, and what app were you using?

One server with DAM and more CQ instances

Hi all,
do you know if is possible to have one server with DAM and 3 server (Author/Publish) with CQ5 (CRX)? Is possible connect these three servers to one DAM? We have CQ5.5... Thank you for information.

First, I assume you are calling it a "server" but you really mean two separate servers for each of 1 - 4 (one author instance, and one publish instance). Is that correct?
For #3, you called it a "testing" server. What are you testing? Code? If so, you'll want to have a testing instance that matches each instance you have. Your "website" instances should have a testing server that matches the production environment. The "intranet" and "other apps" ones should as well. You wouldn't want to test all of those things on one instance, then separate them out in production. A production environment that does not match the testing environment is a recipe for disaster. I also wouldn't try to "migrate" content (DAM assets included) like you do code. Preload test environments with test content that closely mirror production, but you don't necessarilly need to be exact. This is especially true of heavy DAM assets. Just load a subset of videos/images/etc. on testing environments. It's not necessary to sync this with production.
Since #1 and #4 are both in the DMZ, I would use the same instance for both of these scenarios. Do you have a compelling reason to completely separate them? If you combine them, they share a DAM and the problem is solved.
For #2, how are you planning to integrate a non-DMZ instance with the others in the DMZ? This strikes me as a problem.

Laptop monitor choice for photo editing with lightroom and photoshop

Hi,
i'm going to buy a laptop, mostly for photo editing with lightroom and photoshop use.
I'm in trouble with the display choice.
One laptop has LG LP156WF4 or AUO B156HAN01 display, that should be very similar matte ips display with 55%-60% coverage of AdobeRGB. You can find a review in the "Display" section of these link : http://www.notebookcheck.net/Review-Clevo-W650SJ-Schenker-M504-Barebones-Notebook.114329.0 .html
The other laptop hasAU Optronics B156HW01 V.4 Matte 95%, that is a TN matte display with 95% coverage of AdobeRGB. You can find a review in these link (the display should be the green bar): http://www.anandtech.com/show/4649/mythlogic-pollux-1400-clevos-w150hr-tested/6
My question is: which one is better for photo editing with photoshop and lightroom?
Someone says that ips is better because of the fidelity of color reproduction, view angles and contrast.
Someone, on the other side, says that the TN 95% is better because of the gamut%.
Can you help me?
Thanks,
Marco Grechi

Macbook pro is out of budget
Hp assistance said that in italy they don't sell laptop with dreamcolor (i'll call again tomorrow to be sure ) but i think that it would be out of budget (max 2000 euro).
They said that the best solution for me is the zbook 15 g2 (2300 euro), but they DON'T know brand and model of the display and if i can have SSD + HD inside the zbook 15 g2.
The laptop with the lg panel costs 1500 euro. the question is; "i know that the lg display is not the best, but is it almost sufficient for my use?". In this way i may save 500/800 to buy a separated display later.
I have read that dell xps 15 and dell precision m3800 have great display, but they are glossy and very reflective. Is it a big handicap?
Do you know the 3k 15,6" display Panasonic VVX16T020G00 ? It should be a 8-bit display with 72%NTSC gamut ( http://www.panelook.com/VVX16T020G00_Panasonic_15.5_LCM_parameter_22014.html )
Do you sugget me a 3k display for photo editing?
Thanks

Hello. It can be a iPhone4 accessories for the one with pictures and other things are transferred wirelessly to a TV? Thank you

Hello. It can be a iPhone4 accessories for the one with pictures and other things are transferred wirelessly to a TV? Thank you

You need an Apple TV to be able to wirelessly send pictures etc. from iPhone.
However you can buy an adapter if you want to connect to a TV
http://store.apple.com/us/product/MC953

Integration documentation for sap sd with fico and mm

hi Sappers,
I need Documentation for SAP SD with FICO and MM Module
its very urgent.
mail id : [email protected]

Some basic information :
FI-MM: The integration between FI-MM happens in T-code: OBYC
1. When PO is created :
No Entry -
2. When GR is posted
 Inventory Account dr (Transaction Key BSX in OBYC)
 To GRIR account (T.Key WRX in T-code OBYC)
3. When Invoice is posted
 GRIR account Dr.
 Vendor account Cr.
4. Payment made to Vendor
 Vendor A/c Dr
 To Bank Clearing A/c Cr.
Points to know : Movement Types, Assignment of Movement types to T-keys (T-code OMJJ), Value string (I also need some information on this) , OMWN and OMWB transactions.
There is a close integration b/w FI & MM, actually document flows from MM to FI in the following areas such as,
 1. Movement Types:
Used to enable the system to find the predefined posting rules determining how the accounts of financial accounting system are to be posted & to update the stock fields in the matrl master data.(Goods Receipt, Goods Issue, etc)
 2. Valuation Class:
Assignment of material to grp of gl account, used to determine the gl accounts that are updated as a result of goods movement.
3. Transaction/Event key:
Used to control the storage or filing of documents & assignment of documents.Used to differeniate b/w various transactions such as goods movement tht occur in inventory.
 4. Material Type:
Each material should assign mtrl type in mtrl master record used to update whether changes made in qty are updated in material master record & change in value also updated in stock account.
 FI-SD Integration:
The integration is done in T-code VKOA
 1. Sales Order Created
 -No Entry-
2. PGI done (Goods issue)
 Cost of Goods Sold Dr (Configured in OBYC GBB T-Key)
 To Inventory Account
 3. Billing document released to Accounting
 Customer Account Dr.
 To Sales Revenue Account (ERL T-key in Pricing procedure)
Note : The GL account is assigned to this ERL in VKOA
 4. Payment Received
 Bank Clearing A/c Dr
 Customer A/c Cr.
Points to Know : Good to understand the pricing procedure and how the different transaction keys are used like ERL, ERS etc

BO Webi: How to populate a variable with the set of static values for Graph

Hi All,
I have the data: Order number, Order Date, processing time coming from the SAP Bex query in the below format:
Order No Order Date Processing time (Days)
1 Jan-2011 4
2 Jan-2011 5
3 Feb-2011 6
In BO webi report, I have to report the number of orders which were processed in <1day, <2days, <3days,...<10days in a graphical view. i.e., X-Axis: <1day, <2days, <3days,...<10days(10 static buckets for the processing days)
Y-Axis: Number of Orders.
The graphical output should be like below:
X-Axis: <1day, <2days, <3days,<4days,<5days,<6days,<7days,<8days,<9days,<10days
Y-Axis: 0, 0,0,0,1,2,3,3,3,3 (count(Order No)) (Cumulative count)
I am able to calculate the number of orders individually for each of the 10 buckets. But the problem i am facing is that I am not able to hold the 10 static bucket values in a variable to use it for the x-axis in the Graph, as these 10 static bucket values are not coming from the backend source.
I would like to know if there is way to populate a variable(to use it for the X-Axis in the graph) with the set of 10 static values.
Any help would be highly appreciated.
Thanks,
Leela

Hi ,
I think we can use the variable as X-axis in chart.. but Variable Qulaification should be Dimension.
can you try this?.
Using efasion universe
1) Select month and Sold at (unit price) , then run the query
2) create the variable V_Month ==If [Month]=1 Then "Month1" Else "Month2" (Note = Variable Qulaification should be Dimension)
3) Create the variable V_Sum= sum (Sold at (unit price))
4) create another variable V_Cumulative_Sum==[V_Sum]+Previous([V_Sum])
Now add V_Month and V_Cumulative_Sum in table , then convert to chart.. now you can add the variable V_Month as X-axis of the chart.
Hope this will help:)
Thanks
Ponnarasu K

Help setting up port forwarding for Ekiga

Hi
I am trying to set up Ekiga on my Arch X86_64 box but I can't get port forwarding to work on the Thomson TG585v7 wireless router, which I am sharing with a neighbor. I have tried some how-to's I found via Google and set up Application/Game Sharing for the ports Ekiga uses. I also set up static IP connection as it seems to be needed by the router for port forwarding to work but Ekiga still reports that it cannot set up my network connection and asks me to set up port forwading manually, which I have already done.
I would very much appreciate any help to get Ekiga going for me.
My thanks in advance.

graysky wrote:No idea for you specific hardware but should be pretty trivial. http://wiki.ekiga.org/index.php/Enable_ … g_manually
Thanks, but the problem is that setting up the router doesn't seem to work. I checked and repeated the set up a few times but no result. I feel I am missing a little detail somewhere but can't put my finger on it :-(

Cannot set up data source for SQL Server 2005

Is it possible to use Microsoft's Beta 2 version of the SQL Server 2005 JDBC driver with WebLogic 9.0? I've downloaded the driver and added it to my server classpath, but when I try to create a new data source using the admin console, the drop-down list for Microsoft SQL Server only contains drivers for the 2000 version. If I select "Other" from the list and try to move on, I get a cryptic, page-long error on the admin console. If I just select the 2000 driver and try to manually modify the parameters on the next set of screens, I still get errors when I try to test the configuration. I've successfully used a third-party driver before, but this one does not seem to be working. Any help would be greatly appreciated.
Regards,
Sabrina

SabrinaL wrote:
Is it possible to use Microsoft's Beta 2 version of the SQL Server 2005 JDBC driver with WebLogic 9.0? I've downloaded the driver and added it to my server classpath, but when I try to create a new data source using the admin console, the drop-down list for Microsoft SQL Server only contains drivers for the 2000 version. If I select "Other" from the list and try to move on, I get a cryptic, page-long error on the admin console. If I just select the 2000 driver and try to manually modify the parameters
on the next set of screens, I still get errors when I try to test the configuration. I've successfully used a third-party driver before, but this one does not seem to be working. Any help would be greatly appreciated.
Regards,
SabrinaHere I describe the steps I took to bypass the console in making a new pool.
1 - Edit the script %DOMAIN_HOME%\bin\startWebLogic.cmd to add a line like this:
set CLASSPATH=%CLASSPATH%;\new_ms_driver\beta2\sqljdbc_1.0\enu\sqljdbc.jar
In other words, you have to explicitly add a third party driver's classes to
the CLASSPATH that will be in effect for the server. Just adding the driver
to your window's class path will do nothing.
2 - Go to the directory %DOMAIN_HOME%\config\jdbc, where you will find
files of the name *-jdbc.xml. Each of these represents a DataSource.
Copy one of them, perhaps either examples-demo-jdbc.xml, or
examples-demoXA-jdbc.xml depending on whether you want to make an XA
or non-XA pool. Make you new file's name like the name of the DataSource,
still ending in -jdbc.xml. Eg: MS_Beta-jdbc.xml
3 - Edit this file to change as much as would be clear for the
driver you want. Eg: change the driver class to the class you want,
the user name, URL, test table etc. Also, change the pool's initial
capacity to 0. This is so the pool can be created without making a
connection. We need that because the password is encrypted, and
there is no manual way for you to add the correct one yet.
4 - go one directory up, and edit the config.xml. Find a
jdbc-system-resource entry corresponding to the original
resource file you copied. Make a new entry in the config file,
like the original, but change the Datasource name to your new one.
5 - If this all went well, reboot your server and go to your data
source in the console, and edit it. Alter the password to what it
really should be, and you can also change whatever else you might
want.
6 - shut down again, and reboot, and you should then be able to go to
your data source in the console and test a connection.
That's it. Here is an example of a jdbc.xml file I made, and
the entry I made in the config.xml:
config/jdbc/newpool-jdbc.xml:
<?xml version='1.0' encoding='UTF-8'?>
<jdbc-data-source xmlns="http://www.bea.com/ns/weblogic/90" xmlns:sec="http://www.bea.com/ns/weblogic/90/security"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:wls="http://www.bea.com/ns/weblogic/90/security/wls"
xsi:schemaLocation="http://www.bea.com/ns/weblogic/90/domain.xsd">
<name>newpool</name>
<jdbc-driver-params>
<url>jdbc:sqlserver://frogger:1433</url>
<driver-name>com.microsoft.sqlserver.jdbc.SQLServerDriver</driver-name>
<properties>
<property>
<name>user</name>
<value>joe</value>
</property>
</properties>
<password-encrypted>{3DES}cPpx2Z6faqY=</password-encrypted>
</jdbc-driver-params>
<jdbc-connection-pool-params>
<initial-capacity>1</initial-capacity>
<max-capacity>5</max-capacity>
<capacity-increment>1</capacity-increment>
<shrink-frequency-seconds>900</shrink-frequency-seconds>
<test-connections-on-reserve>true</test-connections-on-reserve>
<test-table-name>SQL select 1</test-table-name>
<profile-type>0</profile-type>
</jdbc-connection-pool-params>
<jdbc-data-source-params>
<jndi-name>newpool</jndi-name>
<global-transactions-protocol>TwoPhaseCommit</global-transactions-protocol>
</jdbc-data-source-params>
<jdbc-xa-params></jdbc-xa-params>
</jdbc-data-source>
config.xml entry:
<jdbc-system-resource>
<name>newpool</name>
<target>examplesServer</target>
<descriptor-file-name>jdbc/newpool-jdbc.xml</descriptor-file-name>
</jdbc-system-resource>

Is it possible to set a port number for a server as a value from env ?

Hello,
I'm using the version 6.1 - sp8 and I'd like to set the port number of a server as a value returned by an environment variable. Will this be achievable somehow through the admin console?
In fact, I have an environment variable called '$WEB_SERV_PORT'. I'd need this value to be assigned as the port number for a server. The reason why I am trying to do this is coz I have multiple instances running as different batch accounts and each batch account would be having its own '$WEB_SERV_PORT' which would be the port on which iplanet would be running for that batch account.
I'd appreciate if anyone could help.
Thank you,
Presley.

Hello Sriram,
Thanks for the info that you have provided. I do agree that what you said would be a better approach.
However I've got a couple of questions on the approach that you have suggested (Sorry that its a bit off from the main topic). Just wanted to clarify if what I thought is in sync with the approach that you suggested.
1. As you said, I could setup multiple virtual server within an instance (https-<hostname>) - Does this mean that I am creating "Virtual Server Classes" for each server and through the web-applications tab, assigning the corresponding war file to each Virtual Server Class?
2. Another approach that came upto my mind is that I could create different instances like (https-virtual server1, https-virtual server2, https-virtual server3 etc..). I am assuming that if I follow this approach, I could have each server allocate memory indiviually to the virtual servers. for eg, I could allocate
1024 MB to each virtual server where as in the first approach, I would have to make the 1024 MB to share between all the Virtual Server Classes. And also, in the case theres an issue with one server, I could handle the start/ stop etc individually, where as in the 1st approach, all the virtual classes would be affected by the start/stop. Am I assuming it correctly ?
I'd appreciate if you could let me know.
Thank you,
Presley.
Edited by: pressley on Mar 26, 2008 7:04 AM

Help setting up static ip for minecraft server with TC and PC

Similar Messages

Maybe you are looking for