Help setting up wireless network with Verizon DSL

I bought a MacBook Pro and an Air Port Extreme yesterday. I have an iMAC G5 from October 2004. I have Verizon DSL service and a Westell Series 6100 modem.
Bottom line --> I can't get the wireless connection to work.
I have successfully used a wired dsl connection with my iMAC G5. But, I tried to just disconnect the ethernet cable from my computer and put it into the Airport Extreme and that didn't work. I used the utility to set up the base station and the network, but I'm not sure if I did it properly.
I know a PPPoE is involved but I'm not sure of how to configure the system properly. I'm also not sure if the problem is with the configuration of the AirPort extreme or with my Verizon modem.
All I know is that I want to see a green light on that thing and not a flashing orange one.
Does any one have some instructions for setting up your AirPort Extreme using Verizon DSL? Has anyone else had similar problems? Thanks in advance!
MacBook Pro & iMAC G%   Mac OS X (10.4.9)  

Just finished solving this problem. I am not a strong tech guy, but I know that since it works for others it is just a question of poking and pushing. Anyway it was nine hours in the making...
My snow airport working with an airport express had been bullet proof with verizon dsl for a couple of years. I wanted to upgrade since I am now Intel mac and hit the blinking amber light.
I am only going to be able to give the big picture... The AEBS found and worked with all my computers from the beginning, so the problem became that the default IP Address and Subnet Mask were wrong and never automatically adjusted by the assistants.
Take your working plug-in ethernet connections or the working snow connections from the Airport Utility Internet Connect page. I used the manual configure process to access the info screens.
I copied all the numbers down, but I believe you only have to insert the IP Address, Subnet Mask, Router Address and DNS servers. I put "dsl.verizon.net" in the domain search box.
Go up to the IPv4 pull down menu and select manual and put in the numbers you copied. Then click Update. When the software returns control, the AEBS will still be orange.
Toggle the IPv4 to "using DHCP" Click Update.
This should bring the green light.
I think I then updated the Network Preference Pane, probably had to manually put in my wireless password again. Browser and mail program worked.
I think that was all. I may have had to repeat the toggle to make it stick, but I am operational for the last several hours, including the airport express, a G4 laptop and a Sony PC.
Hope this helps.
Rpbert

Similar Messages

  • Just bought new time capsule- need help setting up WiFi network with another router

    Here ismy situation.
    I had a wireless network setup up at home using a Belkin wifi router.
    I have 2 macBooks (1 pro, 1 air) and 2 iphones that connect wirelessly and a desktop PC that is hard wired to the ethernet port.  In addition, I have a Verizon wireless network extender plugged in by ethernet.  All of the hard-wired gear is in our 3rd floor attic office (and the wireless signal was strong throughout the house).
    The Belkin wifi router was plugged into a wall ethernet jack that is in turn wired into a Linksys router in the basement (along with multiple other ethernet ports througout the house) and is hardwired to the Cable modem next to it.  All of the hard-wired ethernet stuff (including the router in the basement) was there when we bought the house, and I have no clue in the tangle of wires how to sort them out (but don't really think I need to)
    I just purchased a TimeCapsule to do wireless backups of my 2 macbooks, and tried to set it up alongside the existing wireless modem.
    Needless to say, this did not work well. I called  AppleCare, and was told that the TimeCapsule needs to be the "1st" wireless adapter, so I went into the basement, and connected the time capsule directly to the cable modem, and then out to the basement router.  The Belkin router still needs to be in the attic to supply the PC and the Verizon adapter (so it is near a window for GPS signal). 
    If I try to name the WiFi network the same SSID on both the TC and the belkin router (to have dual signal strenth coverage) the whole thing gets messed up and the TC cannot be "found" by the aiprort Utility software.
    What I have done now is that I have 2 side-by-side wireless networks with 2 unique names (actually 3, because I enabled the 5Ghz signal on the TC), but our wireless devices do not "switch" automatically from one SSID  to another stronger signal SSID as we move through the house
    Here's the question: How do I name them the same so that the devices will switch effortlessly to the stongest signal?  I understand it involves switching the "channels" but don't know how to do it right now.  Currently, everything works, so I don't want to mess it up tinkering.  Another caveat- there are several other wireless networks from neighbors houses that I can "see".  I jsut downloaded a program called iStumbler that shows the channels, but not sure what to do with that info.
    Any advice would be appreciated.

    Here's the question: How do I name them the same so that the devices will switch effortlessly to the stongest signal?  I understand it involves switching the "channels" but don't know how to do it right now.  Currently, everything works, so I don't want to mess it up tinkering.  Another caveat- there are several other wireless networks from neighbors houses that I can "see".  I jsut downloaded a program called iStumbler that shows the channels, but not sure what to do with that info.
    Any advice would be appreciated.
    OK.. sounds like a mess.. or at least messy and the previous people should have left a log book with all the IP address info in it.. you have far too many routers.. but from here it is impossible to tell how they are configured. Most are probably just setup as AP.
    Naming rule for wireless.. Same SSID same security different channel.
    SSID ie wireless name to work on the PC side should have no spaces and no special characters. TC name should also follow that rule. So the devices need to all set with fixed channels.
    Don't worry too much about iStumbler and what is outside your house.. there isn't enough channels at 2.4ghz anyway. And you are going to need to use them all. There are only three non-overlapping channels. 1, 6, 11 so set each device to one of those channels. The TC should be as close as you can to where you normally use the MacBooks.. and turn on the 5ghz. You will have to leave it to automatic name so the Macbook can also roam across from 2.4 to 5ghz. But if you care to use a different name and force it onto 5ghz the speed is much better as long as you are in the same room.
    Roaming is great in theory.. often in practice it just doesn't work.. you need to step in and turn off wireless and then turn it back on.. you can quickly see which router it is connecting to by hold down the option key when you click the airport fan in the top menu area.. and look at bssid.. you will have to figure out which number MAC address relates to which router.
    Also do not be surprised if Lion gives you issues. It seems to often drop out and lose connection to the TC as a backup device even if internet is still working.

  • Help with setting up wireless network with ibook

    Okay, I just purchased a cheap little belkin f5d7050 USB adapter to connect my G3 iBook to my wireless network, I do a few things on this computer, and would like to use it not hardwired to my router, since there isn't much room where I have the router...And the reason I purchased this card is because I saw there are drivers on the Belkin website for this little guy. Purchased it, and found out it is version 3xxx, and on the website the only drivers they have for Mac OS X is for version 2xxx. The guy(in very broken English) told me that ralink.com(found out it is ralinktech.com or something like that) has drivers for version 3xxx. I downloaded what I could find at that website, and installed, which went fine, seemed to of installed the same thing the driver did that I got from Belkin, and I install it and restart, and then I go into Applications to start it up, and I open it up, and then it says no device is connected, so I connect the adapter, and the little light doesn't light up on the USB adapter, not sure if it is broken, or that is because there are some steps I am missing.
    Anyone have any ideas? Gone through the same thing?
    I just don't want to dish out for an airport card, since I rarely use this thing for that kind of money. I got this one for like 14 bucks, so I thought I'd give it a try.
    Right before I installed it, it told me after install and restart I have to configure this interface in Network Pane of System Preferences before I can use the Wireless USB adapter. How do I go about doing this? This might be my problem.
    So any help would be greatly appreciated, thanks!
    Jordan

    USB wireless devices have always been a problem it seems.
    Maybe this post can offer some answers...
    http://forums.macosxhints.com/showthread.php?t=26858

  • Setting up wireless network with 2x airport extreme ac

    I've got a business customer with 2 new Airport Extreme 802.11 AC behind a comcast modem.
    When the first extreme is set up, all is well.
    When the 2nd Extreme is introduced, Airport Utility asks to automatically wirelessly extend the network, which I allow it to do.
    But sometime during that setup, the 2nd extreme becomes unresponsive, and the connection to the internet becomes broken.
    The only thing that restores it is to reboot the first Extreme. No matter how many times Iv'e done this, it results in the same problem. I've replaced Extreme #2 with a new one, and I get the same problem.
    There are 20 some odd devices on the network; with one Extreme, it works great, and the Extreme AC's replaced 2 older version of Extreme's that were doing this just perfectly.
    What is causing this problem, other than me doing something stupid, and how do I extend the network? I'd rather extend it with the wire it's connected to than wirelessly.

    Power off AirPort Extreme 2 for now and test the Ethernet cable that is connected from one of the LAN <-> ports on Extreme 1 by temporarily connecting the cable to the Ethernet port on a laptop or desktop. Turn off the wireless off on the computer and see if you can get a good Internet connection that way.
    If you can, then you know that the Ethernet port on the AirPort and the cable are both working correctly.
    If you can't, then you need to do some troubleshooting to identify the real problem before you can attempt to configure AirPort Extreme 2.
    Post back when you have verified that you have a working connection between AirPort Extreme 1 and the device that you are using to test.

  • Need help setting up a network with new Airport Extreme

    Hey All I need some help. Networks, Wan, WPA it's all greek to me. Here's what I am trying to do, I have a newer imac, an ipod touch, a apple TV and the kids have a laptop running on Vista. I have a DSL internet connection through Verizon with a Westell VersaLink Model 327W router. I disabled the wireless option on the versalink and hooked the Ethernet cable from the versalink to my Airport extreme. I am trying to figure out how to set things up so I can restrict the kids laptop from the internet after say 9pm but allow everything else unlimited access. I've read other posts and the manual but can't figure it out. When I turn the Airport off Bridge mode i get a bunch of errors re DHCP beginning and ending addresses and have no clue how to set this up. Before I spend hours on the phone with tech support I figured someone out there may be able to help. This can't be to difficult or is it?

    rmunoz274 wrote:
    I had to call Verizon and spend an hour on the phone, my Versalink is about 3 years old and I never updated it. There is a software update which makes it a little more mac friendly. Cables still run through it on the Ethernet port. I was able to turn the wireless feature off on the Versalink (to stop my neighbors and kids from bypassing the APE and just factory reset the APE and set it up with a shared IP adrs instead of bridging it. Also made sure I turned off the guest network on the APE. Once it was set up I clicked on Airport in the Airport Utility then wireless Clinets, jotted down the client I wanted to restrict access to (Kid's Laptop) then go back to Airport screen, last option on right Access then MAC Adrs Access Control change to "Timed Access", then click the + on the bottom of the window, type the MAC adrs you want to restrict and set time limits, when complete click done..... Only took me a week and a half to figure it out...... Good luck, if that doesn't help let me know, but I'm no expert...
    thanks!!
    i think i have the most recent 327w update, because it now shows my modem screen in a red color and it is broken into 3 sections across the screen.
    as far as the AEBS is concerned, you did not use it in bridge mode at all?
    i thought you had to connect 1 cable from it to the 327w? I have about 5 items i will be connecting, so i will probably run any wired from the AESB, but not sure yet?
    thanks, and yaeh last time my network took me a bit of time as well!!
    what kind of encryption are you running?
    thanks

  • Trying to set up wireless network on PC with Airport Express

    I'm helping a friend set up his network with AirPort Express. He's got a modem attached to his PC, and currently has a router that sends a wireless signal to a receiver on the PC in the other room. Now he's added a Mac, and the old router/receiver doesn't work with Mac. So he bought an Airport Express.
    I've turned on the Airport, and first I connected the ethernet cable from the modem to the AirPort. Per the AirPort utility I put on the PC, it couldn't find it (got the flashing amber light). So then I took out that ethernet, and I hooked up the ethernet directly from the CPU to the AirPort. Suddenly, it was found, and it took me step by step through the set up. It asked for password info from our internet provider (??why would I have that info??), so we just hit "enter". Then it couldn't set up the network, and said to check the "manage network settings". I've tried everything. Not only can I NOT manage to create a network, but now NEITHER ethernet cable will cause any recognition in the AirPort. All I get is the blinking amber light. I'm about to throw all the computers out the window...it really should not be this difficult. I've set up networks in my own home, before, with both PC and Mac, and never had these problems. So, now, I've had to relink up the old router/receiver in order to send out this call for help. Can anyone suggest anything else to try before I use these computers for target practice?
    Thanks in advance,
    Jennifer
    P.S. The main PC w/modem is on Vista with service pack 2.0...since I can't even get that one working with AirPort, I hardly think it matters what the other computers are...

    I had some initial problems too. Make sure that you have the latest Airport Utility in the utilities folder. I used that to correct the problems I had when I first got Time Machine. I recommend resetting everything through there to get it working right.
    Mine is not set up to run an n network because my macs are all g and b compatible. Does the airport utility see the time machine? And if so, does it have a green light in the utility?

  • How do I set up a wireless network with an AirPort Extreme base station and two airport extreme but between apple devices either by ethernet

    How do I set up a wireless network with an AirPort Extreme base station and two airport extreme but between apple devices either by ethernet

    This Apple support document provides good general information on configuring different types of neworks using multiple AirPort routers.
    http://support.apple.com/kb/HT4145
    In particular, you would want to focus on the information regarding a "Roaming Network"

  • Unable to create a wireless network with my airport express.  Please help!

    I am trying to setup a wireless network with an airport express, and connect to it with my Macbook. I just bought both of these and haven't been able to get wireless to work.
    I initially plugged the ethernet cable from my cable modem into the airport express and plugged it into the wall. The macbook detected it when I opened airport utility, but the express had a flashing amber light and I was unable to connect. I then unplugged the express and re-started the cable modem. This time, the airport express showed a solid green light -which should mean that it is working correctly. However, the macbook did not find the airport express device when i searched for it using airport utility. I am able to connect the macbook directly to the cable modem, after re-starting the modem, and access the internet so at least some of the systems are go.
    Any ideas? Thanks in advance for your help.
    Tom

    Is the issue that you cannot access the 802.11n AirPort Express Base Station (AXn) with the AirPort Utility that is running on your Win7 PC? ...  or that once you have configured the AXn, the PC is unable either to find the new wireless network or can find it but cannot connect to it?

  • Creating a network with SBC DSL...

    I have a series of questions both trouble shooting and opinionated concerning setting up a wireless network with my new Airport Express and my current DSL provider: SBC. Just for information purposes my account ends in @sbcglobal.net. Now I have an old Dlink wireless router that worked fine but I would really like the speed of G and ease of apple... SO
    Trouble Shooting
    1) On my old dlink router I used PPPoe with my username (ending in @sbcglobal.net) and password so the router could athenticate and connect to the internet. I have since tried doing a similar setup by choosing PPPoe in the apple express menu and setting up the same user fields BUT when I connect to the network on my Mac I have no internet and in the upper right hand corner where the WIFI signal is it says "negociating..." and continues to says this... Any ideas on other settings I have not enabled or such? Anyone else with SBC DSL gotten their airport express to work?
    Opinions
    2) My old router operates on the WIFI B standard and I was wondering how much better will the G standard be? Will I get better reception and distance throughout the house over B AND will the speed be that different?
    Thank you,
    TM
    Please help soon because I am still stuck on the old slow router and greatly wish to utilize my airport express

    As I use PPPoA my knowledge of PPPoE is limited in that respect.
    2) My old router operates on the WIFI B standard and
    I was wondering how much better will the G standard
    be? Will I get better reception and distance
    throughout the house over B
    No, if anything it might be marginally less.
    AND will the speed be
    that different?
    In terms of an internet connection you will not notice the difference, as most internet connections are much much slower than even 802.11b.
    Where you will notice the difference is internal file transfers between clients on your network.
    iFelix

  • Establishing a wireless network with airport express

    Can someone please help me setting up a wireless network?
    I'm using netgear DG834GT and want to set up a wireless network with my airport express. Unfortunately i cannot set it up and need someone to help.
    Thank You

    If you want to configure an Airport Express to work with the existing wireless network created by your DG834GT wireless router, then follow the advice posted here by David Lovel (the advice is applicable to both Mac and PC users):
    David Lovell, "Airtunes for XP with a Wired/Wireless network" #1, 09:05pm Jan 8, 2005 CDT
    I hope you really did mean to say you were using an Airport Express. Don't confuse an Airport Express with an Airport Extreme card - the Airport Extreme card is the name of the wireless adapter built into your Powerbook.

  • Outgoing Mail Problem with Verizon DSL

    I live in Hampton Roads, VA area and have Verizon's DSL with wireless gateway equipment on Dell Computer. My iMAC connects wirelessly to the gateway and connects to Internet fine and receives email fine on the Verizon POP account. I have verified settings and read most of the topics on the post and am very frustrated. There does not seem to be a definative answer on whether outgoing mail should work with Verizon DSL. Any new insights on this topic or something to look at? Dell is set to use Port 25 and sends fine so I know this is the port to use.

    What does “is not working” mean? What’s the problem exactly?
    If you cannot send with the outgoing (SMTP) server provided by your ISP, the problem could be that you’re telling Mail to authenticate, but the outgoing server doesn’t actually require authentication because it can determine who you are by other means.

  • How can i extend a wireless network with time capsule

    How can i extend an existing wifi verizon wireless network with time capsule? the router is connected on the bottom floor. want to boost the signal to a home office on the top floor, four flights up. connect time capsule via ethernet cable to iMac on 4th floor? Do I have to start a second wifi network or can I set it to just boost the one I have? thank you

    How can i extend an existing wifi verizon wireless network with time capsule?
    It all depends on what you mean by "extend".
    If you plan to "extend" by connecting the Time Capsule to the Verizon router using a wired Ethernet cable, this can be accomplished.
    If you were hoping to connect the Time Capsule to the Verizon router using wireless only, unfortunately the Time Capsule and Verizon products are not compatible for that purpose.
    Check with Verizon to see if they offer an "extender" or "repeater" that could be located very close to the Time Capsule.
    This would provide both more wireless coverage and also allow you to connect the Time Capsule using an Ethernet cable from the "extender" or "repeater".

  • Questions about setting up my network with my Mac Pro?

    I'm trying to set up my network with my Mac Pro. I have two other roommates that need internet and a printer that we all need to access. The modem is with my Mac Pro in room 1, the printer is with another PC in room 2, and another PC with wifi is in room 3. What is the best way to connect all these.
    My idea was to install an Airport card in my Mac Pro, then add an Airport Express station w/airtunes to room 2, to connect the PC and printer. That way, room 3 can access with wifi, and room 2 can physically plug into the Airport Express station. Problem with that is that the Airport Express Card must be professionally installed in my Mac Pro and that $80+ charge on top of the Airport Express and Aiport Card itself, turns this into a $200+ endeavor.
    I also have a wireless Linksys router and Linksys WiFi USB receiver. Anybody have any other ideas?
    Mac Pro   Mac OS X (10.4.9)  

    Your plan wouldn't work anyway. The Mac Pro can not create a WDS compatible wireless network. Therefore the AirPort Express (AX) can not use WDS to wirelessly join the network. Therefore the AX's Ethernet port will not be activated.
    The best solution is to buy an inexpensive wireless router [or the AirPort Extreme base station (AEBS)]. Connect the Mac Pro via Ethernet to the router. Add a wireless adapter to the PC in room 2. Therefore the PCs will connect wirelessly while the Mac Pro connects via Ethernet.

  • I've got a wireless network with one iMac and a Vista PC, on the Vista PC is through USB a printer connected. How can i print from my iMac to that particular printer ?

    I've got a wireless network with one iMac and a Vista PC, on the Vista PC is through USB a printer connected. How can i print from my iMac to that particular printer ?

    You need to turn on Printer Sharing on both the PC and OS X. I can't help you on Vista but in OS X it's System Preferences - Sharing - check the Printer Sharing box.

  • Network diagnostics asks for password for wireless network with no security

    hi
    I am trying to connect my Mac Pro to a wireless network which has no security settings. Other Macs in the house connect to the network with no problem, but the Mac Pro doesn't. I am setting up a new network as I have moved house. In the previous house the wireless worked fine on the Mac Pro.
    When I click on the Airport Icon in the menu bar, the search wheel shows and it finds the network, but when I click on the name of the network typically it doesn't connect. Occasionally it does connect, and I briefly have internet access, but then the number of bars on the Airport Icon gradually reduce and then I can't connect again.
    When I run Network Diagnostics from Safari, it finds the network also, but then typically asks for a WEP password for the Wireless Network when I haven't added any security to the network (occasionally it doesn't ask for a password and I can connect briefly)
    I have tried resetting my Time Capsule and creating a new wireless network with a different name, but still experience the same issues.
    I wonder if someone has any ideas as to what might be going on, and how I might be able to troubleshoot this.
    Thanks
    Nick

    It is one of mine. Yes. It connects to it no problem, just doesn't connect to the actual internet. Network diagnostics has all green lights until the ISP and/or Internet point. If I walk through diagnostics, it will get to the point where it says that the network requires a WEP password. I don't know why it does that because my network is not password-protected (husband claims it doesn't work well with his VPN system to get into work network). If I leave it blank, the connection will work. Eventually, after the computer is put to sleep, I will have the same problem upon waking up. I just tried renaming the network and removing all preferred networks and rebooting. Let's see how that works.

Maybe you are looking for