HELP! Site not recognized...

I recently transfered one of my websites to a different external hard drive from the one it was on (it has since been deleatd from the old drive. I have the .ste file but now when I open DW and try to load the site, there is no content. All my files are there but the icon's for them now look like an html list rather than a DW icon - like it's not "authenticated" or something. It seems like this should be an easy fix and I hope it is...
Can anyone guide me on this? Please...
KASTDC

The icons are not an issue. All of mine have Firefox icons
but open in DW. I open them from DW just fine, but to open them in DW from the folder I DO have to right click and select DW to open with. Still not an issue.
The .ste file was likely made when everything was still on the first drive, and it tells DW to look for the root folder there. It's probably useless at this point.
If you go to Sites and Manage Sites. You can edit the location of the root folder to the new drive and your files should show in the DW library.

Similar Messages

Help! Not recognized by Windows / iTunes

When I connect my iPod using USB 2.0, I now get a "USB device not recognized" error on Windows XP. iTunes also does not recognize that iPod is connected.
I believe this problem may have been caused when my iPod was connected to a friend's speakers. When it first connected, the following error message appeared:
"FireWire connections are not supported. To Transfer Songs, connect the USB cable provided".
After pushing the Selct button to gt rid of the error, iPod worked fine in the speakers and continues to work fine with my FM tuner and other devices.
I've tried the following to fix this problem:
1. 4 of the 5 Rs. (Can't find a way to restore as I can't get iTunes to recognize my iPod).
2. Reinstalled iTunes.
3. Simple restart on computer.
4. System restore on computer.
5. Tried to update USB drivers.
6. Tried to load iPod in disk mode.
7. Went through all of the Apple Support articles for this problem and tried all of the reccomended steps.
As mentioned, my iPod works fine otherwise and I'd hate to have to send it away to be repaired if there is a simple fix. Also, my wife's Nano is working without problem on the same PC, so I have a feeling that this problem is iPod related rather than PC related (though, I could be wrong!)
Does anybody have any suggestions?
Is there a way to restore iPod manually (i.e. without iTunes)?

Hiya! I have had the same problems and have tried all the suggested ways to fix. None of them have worked. I have also rung the apple tech support helpline and they have told me i need to go to my nearest apple store and get my i-pod tested for errors and as my i-pod is out of its warranty period i will have to pay to have it fixed and pay for the courier for it to be sent to be fixed.
i have found if i plug my i-pod in via USB and the malfunction message appears if i hold down the menu and play buttons so it switches off just before the apple logo appears switch the hold button on sometimes i-tunes will recognise it. It kicks it off again 3-4 minutes later but i manage to get a few songs on in that time.
Its a pain in the backside but this is the only way i can get it to work.
Hope this helps someone

Someone please help--iphone not recognized by computer

i've read and searched everywhere for what to do.
when i connect my iphone to the computer, the computer says the device is not recognized. ive reset my iphone, the computer uninstalled then reinstalled itunes, did all the stuff to find it under device manager and it still comes up unknown device. ive tried other computers and cords as well. ive done everything everyone else has been told to do. someone please help me out!
Message was edited by: jaydyn

For Windows, see this... http://support.apple.com/kb/TS1495
For OSX, see the doc linked in that one under Resolution.
Message was edited by: paulcb

Help: encoder not recognizing audio in mpg

i have to convery a number of mpgs into flvs using flash's
video encoder. the mpgs have audio, however when i bring them into
the encoder, click on settings, and then click on the audio tab,
it's all grayed out like it's not recognizing it has audio.
anybody encounter this problem as well?
thanks!

Hi liscola,
I'm having similar issues with Flash's video encoder although
I have an MPEG file with audio that I'm converting to an FLV. I've
been using the 'Flash 8 - High Quality' setting. It starts encoding
the file but then give me the following error;
2008-04-18 13:13:34 : ENCODING FAILED
- Source file: SourceFile.mpg
- Output file: ConvertedFile.flv
- Video codec: On2 VP6
- Alpha channel encoded: no
- Deinterlace: no
- Frame rate: 0 fps
- Key frame interval: 0 frames
- Video data rate: 700 kbps
- Width: 0 pixels
- Height: 0 pixels
- Audio codec: MPEG Layer III (MP3)
- Audio data rate: 128 kbps (stereo)
- FLV duration: 00:00:00
- Encoding time: 00:02:01
====================================================================
An internal application error occurred.
====================================================================
I have looked into this and there are other posts indicating
that the encoder possibly can't format MPEGS with sound thats over
44kbps. Other people have suggested to convert the MPEG to AVI and
then to FLV but when I tried that is just reduced the quality of
the video.
If there's anyone that can help with this issue I'd really
appreciate it.
Thanks Simon

Javac -help: 'javac' not recognized...why?

hi all,
i just installed j2sdk1.4.0_02, but i have a problem. in the dos prompt, when i type C:\>javac -help, it results in a 'javac' is not recognized error. why?
my PATH enviroment variable is this:
%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;C:\Program Files\ActivCard\ActivCard Gold\resources;C:\Program Files\Microsoft SQL Server\80\Tools\BINN;C:\j2sdk1.4.0_02\bin\javac.exe
what am i doing wrong?
thanks,
jeff

Hi, I installe dthe sdk1.4.0 but have no
C:\j2sdk1.4.0_02 dir (or anything relating to java).
Did I not do something right? I can run the java
command but not javac.If you don't have a directory similar to j2sdk1.4.0_02 then you did something wrong. You can try to search your system for javac.exe. If you post the exact steps you went through, someone here may be able to
help you.

PLEASE HELP - Projector not recognizing signal - No one seems to answer

Help!!! I cannot get anyone either at the Apple store or Best Buy to answer my question. I have a Macbook Pro unibody bought in Nov 2009. Of course it has the mini diplay port. I bought a mini display port to vga adapter. The projector keeps giving me the message that it is not recognizing a signal. I looked on a forum where someone said it a technology issue. They said to get a mini display to a dvi cable and then a dvi adapter to a vga. I purchased the cables. The only problem is that the cables will not work together. There are some pins on the male end that have no where to plug in on the female end. It is the 4 pins that surround the flat pin. Why would Apple make two cables that will not work together. Well anyway I am back to square one and still do have a solution to why I can't display an image to a projector from my macbook pro, It is very frustrating that Apple does not have a solution for my problem. Or maybe they do and no one has yet to tell me the right thing to do.

Whoever told you to buy the MDP-DVI adapter and a DVI-VGA adapter was utterly full of baloney. Your MDP-VGA adapter was exactly the right thing to use all along. It's possible that your adapter is bad, though, or that the VGA cable connecting it to the computer is bad. It's even possible that your MacBook Pro's mini-Displayport isn't working, or that the projector isn't working.
If I were you, I'd take the machine and MDP-VGA adapter to an Apple Store's Genius Bar and ask to have the port and the adapter tested for proper function. If the projector and VGA cable also belong to you, take the whole shebang with you and have everything tested together. Apple won't take any responsibility for a malfunctioning projector, of course, but they may at least be able to pinpoint the problem for you.

Please help - Battery not recognized, after totally drained

Dear all, need some advice on how solving this issue. My macbook just had its battery totally drained and now it is not recognized by it.
I have tried all "tips" from the FAQ, but none of them worked out
It seems this is a "common" issue as apple guys are listing as top 3 in the FAQs...
Need help as I am travelling outside US on a project and will be dead without baterries.
For those who cannot help, find my tip: DO NOT LET YOUR MACBOOK BATTERY FULLY DRAIN!
Thanks

Macbooks have worldwide warranties - so maybe if you have your warranty card with you - and perhaps even if you don't - you can go into an Apple shop and get it replaced - go to the genius bar and give 'em a big smile...

Help Ibook not recognizing extra Ram!

Hi, please help, I have just fitted a 1GB ram to my ibook as recommended by the apple genius.
When I click on about this mac it still says 256ram.
Have I done anything wrong? Ive refitted it again and it still doesnt recognize it?
Is there something else I need to do?

bluebubble, Welcome to the discussion area!
Resetting the PRAM has nothing to do with it.
One or more of the following is true:
(1) The RAM isn't installed properly.
(2) The RAM isn't compatible with your iBook.
(3) The RAM is defective.
(4) The iBook's motherboard is defective and not recognizing the RAM.

Site not recognizing my emails

I'm getting an error that my website can not be found.
and clients emailing me are getting a bounce back message.
i'm not impressed.
please help.

Hi there,
This is very little information to go on but this sounds like your domain has expired. Go to where you purchased your domain and check that it has not expired. Either that and your using your email setup in business catalyst to go into your site (development url - YOURSITE.businesscatalyst.com/admin) and check your domain is still set up correctly.

Help: ipod not recognized by computer(s)

Hi,
my ipod (4G) has had problems: sometimes skipping songs. etc. So I decided to reset it. But the problem: It isn't seen by the PC (Windows XP) at the explorer level (same with iTunes), not by
the disk management, not by the ipod update (which dies with "internal error"). It's only seen at USB level. I installed a new updater, I changed USB, I tried 3 different computers.
Meanwhile the ipod freezes ever computer I connect. So no chkdisk, rstore or whatever is suggested.
What really annoys me: This is the 4th time with the fourth ipod this happens (It was changed 3 times by support - oncenow guarantee is lost). There must be some misconstruction within the ipod in general.
Any ideas ?
Regards,
Christian

Hi,
I've solved the problem. The problems occurs if you disconnect the ipod to often "unsafe". Then some files corrupt on the disc. Solution: restore ! But how, when PC is frozen.
First:
Since nobody can give me help I tried and tried and then I noticed, that not the PC is frozen, but everything around the explorer. It has to do with explorer !
Second:
After a long while, the ipod can be seen as removable disk.
Nothing ccould be done with it (explorer still frozen, no chance to something with other windows-tools).
Third:
I read something about "external" tools for removable usb disks. I installed "HP USB Disk Storage Format Tool", which has no "connection" to the explorer. This tool has seen the ipod as removable disk and could format it.
Fourth:
After that the normal restore was possible and everything is fine now.
Christian

Site Not Recognizing Player

This is most likely a run of the mill question. I have scanned through the other posts, but what is there doesn't seem to apply. Maybe I just missed it. Anyway, I downloaded Flash Player (and Mcafee Security Scan) from the Adobe site. It said it was a sucessful download. Yet, the site I go to that requires it says it's not there. So, I down loaded again and the same thing.
In looking in my control panel, it shows Flash Player Active X, but no size applied. It's my understanding that this means it's there. There is nothing in any of the systems folders or programs folders regarding Flash Player. So, is it there? The McAfee is there and runs fine. Shouldn't I be able to just open Flash player like I would Adobe reader or anything else? There are no shortcuts or anything on my desktop!
I am using Windows XP Professional and Internet Explorer. I even tried restarting the computer after the second download.

Hi G, Good job, you can do that with that file as from what I have seen it installs the latest version. It doesn't work all of the time, but you had the correct files other than the one you were able to remove.
I do want to caution you on McAfee. After reading this I don't think you would be wise in keeping this on your system.
You really don't need it and it will conflict with Norton, as they will be fighting over control, not a good idea.
http://blogs.zdnet.com/Bott/?p=2003
The rule on Security is one Anti-Virus and one Firewall. Norton most likely have already disabled the Windows Firewall and installed their own, so you are ok on that.
That was a good idea going back to the Flash folder. Whenever I am updating Flash Player, I download the Uninstaller and the Installer to my Desktop, & disconnect from the Internet. Then I disable my Anti-Virus and disable any apps in the sys tray that use Flash. After I run the Uninstaller, I Reboot, & check my Flash folder to make sure there are no files at all, then I run the Installer and Reboot. Then I check all of my files to make sure all are there, check to make sure the Shockwave Flash Object is correct and enabled. Then reenable whatever I disabled and connect back to the Internet. I have never had a problem, and always have a clean Uninstall and a clean Install.
You can keep these instructions for the next update of Flash Player:-)
Thanks,
eidnolb

Help - Windows not recognizing my DVD drive

I have two super drives on the Mac Pro and windows isn't recognizing them. My Mac recognizes them, what do I do?

Hi Zevie,
maybe this can help you: http://www.instant-registry-fixes.org/how-can-i-fix-code-39-error/
Stefan

Macbook pro HELP! not recognizing external Hdd and freezing

Hey guys, i need to know why my toshiba external drive works at times and shows up on my desktop and sometimes the external hard drive lights up but is undiscoverable and doesnt show on the desktop? I have also recently noticed that when i plug items into the usb port, the trackpad freezes up. Can you please tell me why it freezes? My macbook pro is only 6 months old is it supposed to be doing this?

I'm not sure why your external drive will not mount, but your computer defintely should not have a 'frozen' trackpad when you plug in USB devices. Since your machine is relatively new, take it in to your nearest Apple Store or an AASP and have them run diagnostics on it.
What you describe is not normal behavior.
Good luck,
Clinton

HELP-iPOD NOT RECOGNIZED BY WINDOWS!!! UNIQUE ISSUE HERE!!

I have a 4GB silver mini. The following things happened:
I have a new laptop. This is the first time I plugged in an iPod in it.
For this case I'll refer the USB port that goes into the computer as USB and the Port as the plug that goes into the iPod from the iPod USB cable.
1.) So my iPod was fully charged and I decided to plug the iPod USB cable into my laptop at the same time that the Port was in the iPod. And it was taking a little bit longer than I thought it would for the laptop to recognize the iPod, so I unplugged it. When I did that a message popped up from the Windows XP taskbar saying "Found New Hardware: A problem occurred during installation."
2.) When I plugged it back into the original USB port on the computer, it didn't work so I plugged the iPod USB wire into the other USB connection and when the iPod didn't respond again, I knew something was up.
3.) I resetted the iPod. Uninstalled iPod and iTunes software. Reinstalled it. Uninstalled the USB Root Hubs and the other USB devices and then reinstalled them by going to Action->Scan for Hardware Changes in Device Manager. Still didn't do anything. Tried to Restore my iPod using the iPod Updater software, but got a "Can't mount iPod" message.
4.) Here's the weird things I noticed. When the iPod port is plugged in and the USB is connected to the laptop at the same time, the iPod screen shuts off-but still charges. During this if I unplug the iPod Port from the iPod while its still connected to the USB in the laptop, the battery instantly weakens and dies no matter how fully charged it was before. Also, when I unplug the iPod from the USB port, the backlights turns on for a few seconds, indicating that iPod knew it was unplugged.
5.) One thing that also happens when I loosen the Port wire from the iPod while its still in the USB is that it displays the same "Found New Hardware: A problem occurred during installation" pop-up came again except sometimes it says "OK To Disconnect" with a Check Mark symbol. But it still doesn't fix the error after I disconnect it and then connect it again. In one instance when I did this, my iPod beeped a few times like a stopwatch.
6.) I talked to Apple Tech support, but they pretty much sent me 2-3 links giving me ideas of what to do. All of which I tried. No luck
I know this is definetely a unique problem, but any suggestions or any responses from Apple Tech Support will be extremely appreciated!!!
Dell Inspiron 1300 Windows XP SP2

You need to connect the ipod to the laptop and see if it show in windows under "My Computer" as IPOD or Removable storage.

Ipod not recognized by computer or itunes plaese help

Hey I have had my ipod since last december and around april it stopped working and responding to my computer. it does charge but now it can only hold a charge for a certain amount of time. Can sum one help me?

Have you had a chance to look at these troubleshooting pages? They may be of some help:
iPod missing in My Computer and in iTunes
iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date
If you are using a laptop, this page might help: iPod not recognized when connected to Windows laptop over USB

HELP! Site not recognized...

Similar Messages

Maybe you are looking for