Help...skip logic has made my form unfillable...why?
Some of the selected features are not available for PDF forms
You have selected the following features for your form that will not be functional in the PDF form:
- Skip Logic Rules (all content will be shown)
I am not sure what you mean by it has made the form unfillable. There are features in FormsCentral web forms that are not supported in a PDF form, those features are listed in this FAQ:
What features do not work with PDF forms?
The message is shown to let you know that Skip Logic won't work in the PDF, the PDF will still be fillable but will show all fields, nothing will be hidden, no Show/Hide logic will be used in the PDF...
This FAQ "Tutorial: Creating and distributing fillable PDF forms" may also be useful.
Thanks,
Josh
Similar Messages
-
Can I use skip logic in Acrobat X forms, or do I need to go to Forms Central?
It's possible since you can control fields with JavaScript, but depending on exactly how you want the form to behave, it could be simple or rather complex. You have more options if it doesn't need to work with Reader, and you may want to look into creating the form in LiveCycle Designer as it allows you to create more dynamic forms.
-
Ever since I upgraded my iphone 4 to the new ios7, I have intermittent use of my texts...cannot send or receive. I cannot hang up phone calls...the screen is black and I don't have an END button. I have deleted nearly everything fome my phone, about 8 gb free at the moment on a 16 gb phone. Can anything be done. I should have never done the upgrade and now I can't go back. Help.
Tried this about 20 times already. Can send about two-three texts and then can't receive or send. Even tried a reset to factory...still crap.
-
I am trying to skip logic a page, but my form fails to do so
In my form, the deadline to submit an abstract has passed, so I would like to skip the pages which ask for contributed talk information. Yet, in every iteration, the form fails to skip those pages. I've tried everything, and nothing works.
The only way I could hack a solution is to go to all of the different fields on those two pages, go "Show/Hide" on each field, and then hide if "any" condition was met, where the condition was a Yes/No question from before (and I hide if they said either of Yes or No).
If I were to guess, it looks like since the form has already accepted information from those fields, it refuses to skip over those fields for future submissions. But this is a problem, of course, because I don't want to write a brand new form that includes everything BUT those two pages. (And then later have to integrate the two separate databases.) The whole point of "skip logic" is for a user to "show and hide certain parts of a form", right?
This smacks of a bug, as far as I can tell.Dear Brian,
Thanks for responding, and I appreciate the suggestion. I think I am
following exactly what you are saying, and I agree with you. The
details: the pages with the "submit abstract" fields are on pages 6 and
7. I thought I could, at the end of page 5, say, "Skip directly to
page 8". I clicked the correct button at the bottom, I said "Skip
directly to page 8", yet, the form fails to skip. I tried it on the
"Test your page", I tried it on the live form, I tried everything.
I clicked every button on the Adobe Forms website associated with the
form, and no matter what incantation I pick, I can't get pages 6 and 7
to go away.
I believe that I am correctly interpreting what Adobe advertises as
"skip directly to page", but it simply isn't working with my form in
this particular case, and for what reason I have no idea. I wanted to
submit a bug report but the only thing I could find on their website
was "Start a discussion."
Even though I can't make the entire pages go away, I managed to get the
fields to go away by that "show/hide" trick, where I am hiding the field
regardless of what the user enters previously. Clearly, though, this
isn't the right way to make pages 6 and 7 go away, and if I knew what
peculiarity about my form was rendering 6+7 inviolate, I would change
it.
I was a bit surprised, frankly, because up until now everything about
the form (and FormsCentral in general) seemed pretty slick - I was
impressed. Now, in the moment that I need these pages to go away, here
I am, hacking again.
If you'd like to see the form in action, you can find it at
http://ohiomaa.org/register/
Thanks again - I don't know that there is a solution here, and even if
there were, it's going to be too late by this Friday anyway.
Regards,
Jay
On Tue, Oct 21, 2014 at 2:30 PM, brian.filipiak <[email protected]> -
Creating a form with a skip pattern (skip logic)
Hello - Using LifeCycle Designer 7.0
I am creating a form with a simple: Yes/No radio button for one field(quesiton). I would like to have the form skip to a later field(question) if they answer 'No'. Can this be coded somehow in FormCalc?
Is there a way to easily put skip logic (not tab) in a form (Survey).
Thanks for your time/help.You can use the setFocus methos to move the cursor to the field that you want..
Place it in the click event of the radiobutton.
In FormCalc:
if(radioButton1.rawValue == 1) then
$host.setFocus("<FIELDNAME>");
endif
In Java Script:
if(radioButton1.rawValue == 1)
xfa.host.setFocus("<FIELDNAME>");
Thanks
Srini -
I upgraded to the latest iTunes 11.1.4, after a prompt from the iTunes store. But will not open after the upgrade. One of three error messages told me to reinstall. I did. Restarted and scanned. But no help there. So I unistalled and re installed from Apples' website. The installation was okay as usual but still will not open. Keep getting the same error messages. '' Runtime Error R6034, '' '' An application has made an attempt to load the C runtime library incorrectly. Please contact the application's support team for more information.'' That's the error messages I get when I try to open the New installed iTunes 11.1.4. Right now there is no iTunes on any of my PCs. Installed but will not open. Please Help.Thanks.
Jonas.
3 Windows PCs. Safari 5.1.5 ( One Laptop with Vista. Two Windows 7 64 bit on All in One Sony desktop PCs. )Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
Hi everyone I was wondering if someone can help with this issue please. When i tried to open itunes in my laptop that is running on windows xp i get this error message " program c:/program files/itunes/itunes.exe
RC034
an application has made an attempt to run the c runtime time library incorrectly
please contact the aplication support team for more information."Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99199) -
Using skip logic to show sections of the form a set number of times
Hi
I have form which i need all to fill out basic information and a section which asks for furtehr information if a certain condition is true. what i'm looking ofr is this section of the form to be shown again as long as a condition is true or for x numbe rof times.
the form collects basic information about event companies and information about one event, i have a question which asks howmany events per year do you run. if this is more than one or set to true section part of the form would need to be shown again for x number of times to collect the information about thos events also.
If not is there any workaround i could implemnet using skip logic to acheieve an efective solution?
thanksYeah that is the work around. This post explains how:
http://forums.adobe.com/thread/1142978?tstart=0
Its a little tedious to setup up but it should work.
Randy -
When im trying to download itunes it keeps saying R6034 application has made an attempt to load the C runtime library incorrectly error 7 windows error 1114
This forum is for questions from those managing sites on iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes for Windows forum.
Regards. -
I keep getting the following message:
Runtime Error...Microsoft Visual C++ Runtime Library Program C:\Program Files\iTunes\iTunes.exe
R6034 An application has made an attempt to load the C runtime library incorrectly and can't open iTunes now.
Please could someone help with this query as I am at a loss as to why this problem is now occurring? Thank you.Check the user tip below.
https://discussions.apple.com/docs/DOC-6562 -
My Iphone 4 has a cracked screen and has made it impossible for me to unlock my pin. I an giving the phone to a friend but want to know if there is a way I can ensure all my data is wiped off it before I do. Can anyone help? I have upgraded to a iPhone 5 so Im not sure if the old one would have automatically wiped the old phone. I have lots of emails and messages I wouldnt want peo
Have you synced this phone, with iTunes, while the passcode was enabled? If so, plug it in, iTunes running, & hit the Restore button on the Summary Pane. This will also erase the phone.
However, if you have not synced, while the passcode was enabled, you will not be able to do this without first enereting the passcode. If that's the case, try recovery mode:
http://support.apple.com/kb/HT1808 -
Macbook pro two days old...bought logic from app store...logic has installed partly each time i open it up it wants to download rest of programme then stops half way thru and gets error message 'logic is unable to continue with download' help needed !
Hello:
I would trot back into the Apple store and have them fix the problem (or call Applecare with a warranty issue). There is no sense in you wasting your time trying to troubleshoot things on a new computer.
Barry -
"Logic has detected a possible conflict "" -- HELP!
The full error message is, "Logic has detected a possible conflict between one or more third party MIDI or audio drivers. Be sure to install the latest drivers for all audio and MIDI equipment connected to your computer, and remove any older or unused drivers."
OK, where exactly on my mac do these older or unused drivers live???I've looked through some old threads on this issue and some seem to have been produced by track automation, which wouldn't be causing my issue as none of my tracks have automation.
Everything has worked perfectly up until just today; the only thing that changed was I installed the 3.0.1 version of Guitar Rig 3. I thought it might have something to do with the driver for Rig Kontrol hardware, so I deleted and reinstalled... Same Conflict message. So I force-quit Logic and opened a track that was all software instruements -- same problem.
Can anyone help me? I am desperate here!!! -
I´ve so many privat things on I tunes like pictures, music etc.and i won´t loose them. is there anybody who can help me to save my private things and help me to solve teh problem
Thanks you for help greetings from austriaI just had the same error:
R6034
An application has made an attempt to load the C runtime library incorrectly. Please contact the apps support team for more info.
I went to http://support.apple.com/kb/ht1925 and did a complete removal and reinstallation of iTunes. You MUST follow the directions here exactly...it's more than just iTunes that must be removed, and it MUST be done in the order in which the support article says. I followed the exact instructions, and iTunes is back on my machine (no more C runtime error) and you do NOT lose your music...it's all in my library, as it was before.
Good luck! -
I have tried EVERY suggestion Adobe has made and no matter what, I get the black "Adobe Reader Installer" screen EVERY TIME!! Any suggestions to help me overcome this problem would be appreciated. BTW: I have a Windows 7 Home OS. I prefer FireFox. I have successfully downloaded Adobe Reader using all the major browsers, however it does NOT matter, I am NOT able to actually install Adobe Reader, every time all I get is the black pop-up "Adobe Reader Installer" screen!!!
PS.... I had a previous version on my computer that needed to be updated.... so I uninstalled it because I was having trouble installing the new version.... so even that did not help!!
Maybe you are looking for
-
Does EXPORT to MEMORY ID work in background
Hi, I'm exporting an internal table to a memory ID which will then be used in another program which will be called from the current program with a SUBMIT and RETURN statement. When i use the SUBMIT online, it seems to EXPORT and IMPORT the internal t
-
Hello! Is it good idea to use infrared LED with front camera in new iPhone for illuminating me (for example) when I am talking with someone by FaceTime at night? Thanks and sorry for my bad English.
-
Externalising BC4J Configuration/Reusing BC4J jars
Hi, This is a bit of a novice question. Is it possible to externalise the BC4J configuration file containing the datasource definitions etc. ? I am interested in doing this for a number of reasons. 1. I would like to see if it is possible to use Ant/
-
Is there a VI availible that will allow one to interact with an analog signal
Hello all, I am new to the sight and look forward to participating. I have a project that I'm working on and I would like to ask for your thoughts and direction if you're willing. I have a few weeks left before completing an electronics program degr
-
Hi all i really thanks for your support ... Here is my question I need a Essbase report script which in essence is a basic query where we would say all lev 0 cost centers excluding the some of the rollup points. i.e i need to delete some level 0 memb